diff options
Diffstat (limited to 'arch/arm/cpu/ixp/npe/IxEthDBFirewall.c')
| -rw-r--r-- | arch/arm/cpu/ixp/npe/IxEthDBFirewall.c | 266 |
1 files changed, 0 insertions, 266 deletions
diff --git a/arch/arm/cpu/ixp/npe/IxEthDBFirewall.c b/arch/arm/cpu/ixp/npe/IxEthDBFirewall.c deleted file mode 100644 index eb46174b6c..0000000000 --- a/arch/arm/cpu/ixp/npe/IxEthDBFirewall.c +++ /dev/null @@ -1,266 +0,0 @@ -/** - * @file IxEthDBFirewall.c - * - * @brief Implementation of the firewall API - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @par - * -- End of Copyright Notice -- - */ - - -#include "IxEthDB_p.h" - -/** - * @brief updates the NPE firewall operating mode and - * firewall address table - * - * @param portID ID of the port - * @param epDelta initial entry point for binary searches (NPE optimization) - * @param address address of the firewall MAC address table - * - * This function will send a message to the NPE configuring the - * firewall mode (white list or black list), invalid source - * address filtering and downloading a new MAC address database - * to be used for firewall matching. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or IX_ETH_DB_FAIL otherwise - * - * @internal - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFirewallUpdate(IxEthDBPortId portID, void *address, UINT32 epDelta) -{ - IxNpeMhMessage message; - IX_STATUS result; - - UINT32 mode = 0; - PortInfo *portInfo = &ixEthDBPortInfo[portID]; - - mode = (portInfo->srcAddressFilterEnabled != FALSE) << 1 | (portInfo->firewallMode == IX_ETH_DB_FIREWALL_WHITE_LIST); - - FILL_SETFIREWALLMODE_MSG(message, - IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), - epDelta, - mode, - IX_OSAL_MMU_VIRT_TO_PHYS(address)); - - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - return result; -} - -/** - * @brief configures the firewall white list/black list - * access mode - * - * @param portID ID of the port - * @param mode firewall filtering mode (IX_ETH_DB_FIREWALL_WHITE_LIST - * or IX_ETH_DB_FIREWALL_BLACK_LIST) - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFirewallModeSet(IxEthDBPortId portID, IxEthDBFirewallMode mode) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL); - - if (mode != IX_ETH_DB_FIREWALL_WHITE_LIST - && mode != IX_ETH_DB_FIREWALL_BLACK_LIST) - { - return IX_ETH_DB_INVALID_ARG; - } - - ixEthDBPortInfo[portID].firewallMode = mode; - - return ixEthDBFirewallTableDownload(portID); -} - -/** - * @brief enables or disables the invalid source MAC address filter - * - * @param portID ID of the port - * @param enable TRUE to enable invalid source MAC address filtering - * or FALSE to disable it - * - * The invalid source MAC address filter will discard, when enabled, - * frames whose source MAC address is a multicast or the broadcast MAC - * address. - * - * Note that this function is documented in the main component - * header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFirewallInvalidAddressFilterEnable(IxEthDBPortId portID, BOOL enable) -{ - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL); - - ixEthDBPortInfo[portID].srcAddressFilterEnabled = enable; - - return ixEthDBFirewallTableDownload(portID); -} - -/** - * @brief adds a firewall record - * - * @param portID ID of the port - * @param macAddr MAC address of the new record - * - * This function will add a new firewall record - * on the specified port, using the specified - * MAC address. If the record already exists this - * function will silently return IX_ETH_DB_SUCCESS, - * although no duplicate records are added. - * - * Note that this function is documented in the main - * component header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFirewallEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) -{ - MacDescriptor recordTemplate; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_REFERENCE(macAddr); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL); - - memcpy(recordTemplate.macAddress, macAddr, sizeof (IxEthDBMacAddr)); - - recordTemplate.type = IX_ETH_DB_FIREWALL_RECORD; - recordTemplate.portID = portID; - - return ixEthDBAdd(&recordTemplate, NULL); -} - -/** - * @brief removes a firewall record - * - * @param portID ID of the port - * @param macAddr MAC address of the record to remove - * - * This function will attempt to remove a firewall - * record from the given port, using the specified - * MAC address. - * - * Note that this function is documented in the main - * component header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully of an appropriate error message otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFirewallEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) -{ - MacDescriptor recordTemplate; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_REFERENCE(macAddr); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL); - - memcpy(recordTemplate.macAddress, macAddr, sizeof (IxEthDBMacAddr)); - - recordTemplate.type = IX_ETH_DB_FIREWALL_RECORD; - recordTemplate.portID = portID; - - return ixEthDBRemove(&recordTemplate, NULL); -} - -/** - * @brief downloads the firewall address table to an NPE - * - * @param portID ID of the port - * - * This function will download the firewall address table to - * an NPE port. - * - * Note that this function is documented in the main - * component header file, IxEthDB.h. - * - * @return IX_ETH_DB_SUCCESS if the operation completed - * successfully or IX_ETH_DB_FAIL otherwise - */ -IX_ETH_DB_PUBLIC -IxEthDBStatus ixEthDBFirewallTableDownload(IxEthDBPortId portID) -{ - IxEthDBPortMap query; - IxEthDBStatus result; - - IX_ETH_DB_CHECK_PORT(portID); - - IX_ETH_DB_CHECK_SINGLE_NPE(portID); - - IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL); - - SET_DEPENDENCY_MAP(query, portID); - - ixEthDBUpdateLock(); - - ixEthDBPortInfo[portID].updateMethod.searchTree = ixEthDBQuery(NULL, query, IX_ETH_DB_FIREWALL_RECORD, MAX_FW_SIZE); - - result = ixEthDBNPEUpdateHandler(portID, IX_ETH_DB_FIREWALL_RECORD); - - ixEthDBUpdateUnlock(); - - return result; -} |