diff options
Diffstat (limited to 'arch/arm/cpu/ixp/npe/IxEthDBNPEAdaptor.c')
| -rw-r--r-- | arch/arm/cpu/ixp/npe/IxEthDBNPEAdaptor.c | 719 |
1 files changed, 0 insertions, 719 deletions
diff --git a/arch/arm/cpu/ixp/npe/IxEthDBNPEAdaptor.c b/arch/arm/cpu/ixp/npe/IxEthDBNPEAdaptor.c deleted file mode 100644 index 112a46c998..0000000000 --- a/arch/arm/cpu/ixp/npe/IxEthDBNPEAdaptor.c +++ /dev/null @@ -1,719 +0,0 @@ -/** - * @file IxEthDBDBNPEAdaptor.c - * - * @brief Routines that read and write learning/search trees in NPE-specific format - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @par - * -- End of Copyright Notice -- - */ - -#include "IxEthDB_p.h" -#include "IxEthDBLog_p.h" - -/* forward prototype declarations */ -IX_ETH_DB_PUBLIC void ixEthDBELTShow(IxEthDBPortId portID); -IX_ETH_DB_PUBLIC void ixEthDBShowNpeMsgHistory(void); - -/* data */ -UINT8* ixEthDBNPEUpdateArea[IX_ETH_DB_NUMBER_OF_PORTS]; -UINT32 dumpEltSize; - -/* private data */ -IX_ETH_DB_PRIVATE IxEthDBNoteWriteFn ixEthDBNPENodeWrite[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1]; - -#define IX_ETH_DB_MAX_DELTA_ZONES (6) /* at most 6 EP Delta zones, according to NPE FS */ -IX_ETH_DB_PRIVATE UINT32 ixEthDBEPDeltaOffset[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1][IX_ETH_DB_MAX_DELTA_ZONES]; -IX_ETH_DB_PRIVATE UINT32 ixEthDBEPDelta[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1][IX_ETH_DB_MAX_DELTA_ZONES]; - -/** - * @brief allocates non-cached or contiguous NPE tree update areas for all the ports - * - * This function is called only once at initialization time from - * @ref ixEthDBInit(). - * - * @warning do not call manually - * - * @see ixEthDBInit() - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBNPEUpdateAreasInit(void) -{ - UINT32 portIndex; - PortUpdateMethod *update; - - for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) - { - update = &ixEthDBPortInfo[portIndex].updateMethod; - - if (ixEthDBPortDefinitions[portIndex].type == IX_ETH_NPE) - { - update->npeUpdateZone = IX_OSAL_CACHE_DMA_MALLOC(FULL_ELT_BYTE_SIZE); - update->npeGwUpdateZone = IX_OSAL_CACHE_DMA_MALLOC(FULL_GW_BYTE_SIZE); - update->vlanUpdateZone = IX_OSAL_CACHE_DMA_MALLOC(FULL_VLAN_BYTE_SIZE); - - if (update->npeUpdateZone == NULL - || update->npeGwUpdateZone == NULL - || update->vlanUpdateZone == NULL) - { - ERROR_LOG("Fatal error: IX_ACC_DRV_DMA_MALLOC() returned NULL, no NPE update zones available\n"); - } - else - { - memset(update->npeUpdateZone, 0, FULL_ELT_BYTE_SIZE); - memset(update->npeGwUpdateZone, 0, FULL_GW_BYTE_SIZE); - memset(update->vlanUpdateZone, 0, FULL_VLAN_BYTE_SIZE); - } - } - else - { - /* unused */ - update->npeUpdateZone = NULL; - update->npeGwUpdateZone = NULL; - update->vlanUpdateZone = NULL; - } - } -} - -/** - * @brief deallocates the NPE update areas for all the ports - * - * This function is called at component de-initialization time - * by @ref ixEthDBUnload(). - * - * @warning do not call manually - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBNPEUpdateAreasUnload(void) -{ - UINT32 portIndex; - - for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) - { - if (ixEthDBPortDefinitions[portIndex].type == IX_ETH_NPE) - { - IX_OSAL_CACHE_DMA_FREE(ixEthDBPortInfo[portIndex].updateMethod.npeUpdateZone); - IX_OSAL_CACHE_DMA_FREE(ixEthDBPortInfo[portIndex].updateMethod.npeGwUpdateZone); - IX_OSAL_CACHE_DMA_FREE(ixEthDBPortInfo[portIndex].updateMethod.vlanUpdateZone); - } - } -} - -/** - * @brief general-purpose NPE callback function - * - * @param npeID NPE ID - * @param msg NPE message - * - * This function will unblock the caller by unlocking - * the npeAckLock mutex defined for each NPE port - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBNpeMsgAck(IxNpeMhNpeId npeID, IxNpeMhMessage msg) -{ - IxEthDBPortId portID = IX_ETH_DB_NPE_TO_PORT_ID(npeID); - PortInfo *portInfo; - - if (portID >= IX_ETH_DB_NUMBER_OF_PORTS) - { - /* invalid port */ - return; - } - - if (ixEthDBPortDefinitions[portID].type != IX_ETH_NPE) - { - /* not an NPE */ - return; - } - - portInfo = &ixEthDBPortInfo[portID]; - - ixOsalMutexUnlock(&portInfo->npeAckLock); -} - -/** - * @brief synchronizes the database with tree - * - * @param portID port ID of the NPE whose tree is to be scanned - * @param eltBaseAddress memory base address of the NPE serialized tree - * @param eltSize size in bytes of the NPE serialized tree - * - * Scans the NPE learning tree and resets the age of active database records. - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBNPESyncScan(IxEthDBPortId portID, void *eltBaseAddress, UINT32 eltSize) -{ - UINT32 eltEntryOffset; - UINT32 entryPortID; - - /* invalidate cache */ - IX_OSAL_CACHE_INVALIDATE(eltBaseAddress, eltSize); - - for (eltEntryOffset = ELT_ROOT_OFFSET ; eltEntryOffset < eltSize ; eltEntryOffset += ELT_ENTRY_SIZE) - { - /* (eltBaseAddress + eltEntryOffset) points to a valid NPE tree node - * - * the format of the node is MAC[6 bytes]:PortID[1 byte]:Reserved[6 bits]:Active[1 bit]:Valid[1 bit] - * therefore we can just use the pointer for database searches as only the first 6 bytes are checked - */ - void *eltNodeAddress = (void *) ((UINT32) eltBaseAddress + eltEntryOffset); - - /* debug */ - IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) checking node at offset %d...\n", eltEntryOffset / ELT_ENTRY_SIZE); - - if (IX_EDB_NPE_NODE_VALID(eltNodeAddress) != TRUE) - { - IX_ETH_DB_NPE_VERBOSE_TRACE("\t... node is empty\n"); - } - else if (eltEntryOffset == ELT_ROOT_OFFSET) - { - IX_ETH_DB_NPE_VERBOSE_TRACE("\t... node is root\n"); - } - - if (IX_EDB_NPE_NODE_VALID(eltNodeAddress)) - { - entryPortID = IX_ETH_DB_NPE_LOGICAL_ID_TO_PORT_ID(IX_EDB_NPE_NODE_PORT_ID(eltNodeAddress)); - - /* check only active entries belonging to this port */ - if (ixEthDBPortInfo[portID].agingEnabled && IX_EDB_NPE_NODE_ACTIVE(eltNodeAddress) && (portID == entryPortID) - && ((ixEthDBPortDefinitions[portID].capabilities & IX_ETH_ENTRY_AGING) == 0)) - { - /* search record */ - HashNode *node = ixEthDBSearch((IxEthDBMacAddr *) eltNodeAddress, IX_ETH_DB_ALL_FILTERING_RECORDS); - - /* safety check, maybe user deleted record right before sync? */ - if (node != NULL) - { - /* found record */ - MacDescriptor *descriptor = (MacDescriptor *) node->data; - - IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) synced entry [%s] already in the database, updating fields\n", mac2string(eltNodeAddress)); - - /* reset age - set to -1 so that maintenance will restore it to 0 (or more) when incrementing */ - if (!descriptor->recordData.filteringData.staticEntry) - { - if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) - { - descriptor->recordData.filteringData.age = AGE_RESET; - } - else if (descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD) - { - descriptor->recordData.filteringVlanData.age = AGE_RESET; - } - } - - /* end transaction */ - ixEthDBReleaseHashNode(node); - } - } - else - { - IX_ETH_DB_NPE_VERBOSE_TRACE("\t... found portID %d, we check only port %d\n", entryPortID, portID); - } - } - } -} - -/** - * @brief writes a search tree in NPE format - * - * @param type type of records to be written into the NPE update zone - * @param totalSize maximum size of the linearized tree - * @param baseAddress memory base address where to write the NPE tree into - * @param tree search tree to write in NPE format - * @param blocks number of written 64-byte blocks - * @param startIndex optimal binary search start index - * - * Serializes the given tree in NPE linear format - * - * @return none - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBNPETreeWrite(IxEthDBRecordType type, UINT32 totalSize, void *baseAddress, MacTreeNode *tree, UINT32 *epDelta, UINT32 *blocks) -{ - MacTreeNodeStack *stack; - UINT32 maxOffset = 0; - UINT32 emptyOffset; - - stack = ixOsalCacheDmaMalloc(sizeof (MacTreeNodeStack)); - - if (stack == NULL) - { - ERROR_LOG("DB: (NPEAdaptor) failed to allocate the node stack for learning tree linearization, out of memory?\n"); - return; - } - - /* zero out empty root */ - memset(baseAddress, 0, ELT_ENTRY_SIZE); - - NODE_STACK_INIT(stack); - - if (tree != NULL) - { - /* push tree root at offset 1 */ - NODE_STACK_PUSH(stack, tree, 1); - - maxOffset = 1; - } - - while (NODE_STACK_NONEMPTY(stack)) - { - MacTreeNode *node; - UINT32 offset; - - NODE_STACK_POP(stack, node, offset); - - /* update maximum offset */ - if (offset > maxOffset) - { - maxOffset = offset; - } - - IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) writing MAC [%s] at offset %d\n", mac2string(node->descriptor->macAddress), offset); - - /* add node to NPE ELT at position indicated by offset */ - if (offset < MAX_ELT_SIZE) - { - ixEthDBNPENodeWrite[type]((void *) (((UINT32) baseAddress) + offset * ELT_ENTRY_SIZE), node); - } - - if (node->left != NULL) - { - NODE_STACK_PUSH(stack, node->left, LEFT_CHILD_OFFSET(offset)); - } - else - { - /* ensure this entry is zeroed */ - memset((void *) ((UINT32) baseAddress + LEFT_CHILD_OFFSET(offset) * ELT_ENTRY_SIZE), 0, ELT_ENTRY_SIZE); - } - - if (node->right != NULL) - { - NODE_STACK_PUSH(stack, node->right, RIGHT_CHILD_OFFSET(offset)); - } - else - { - /* ensure this entry is zeroed */ - memset((void *) ((UINT32) baseAddress + RIGHT_CHILD_OFFSET(offset) * ELT_ENTRY_SIZE), 0, ELT_ENTRY_SIZE); - } - } - - emptyOffset = maxOffset + 1; - - /* zero out rest of the tree */ - IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Emptying tree from offset %d, address 0x%08X, %d bytes\n", - emptyOffset, ((UINT32) baseAddress) + emptyOffset * ELT_ENTRY_SIZE, totalSize - (emptyOffset * ELT_ENTRY_SIZE)); - - if (emptyOffset < MAX_ELT_SIZE - 1) - { - memset((void *) (((UINT32) baseAddress) + (emptyOffset * ELT_ENTRY_SIZE)), 0, totalSize - (emptyOffset * ELT_ENTRY_SIZE)); - } - - /* flush cache */ - IX_OSAL_CACHE_FLUSH(baseAddress, totalSize); - - /* debug */ - IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Ethernet learning/filtering tree XScale wrote at address 0x%08X (max %d bytes):\n\n", - (UINT32) baseAddress, FULL_ELT_BYTE_SIZE); - - IX_ETH_DB_NPE_DUMP_ELT(baseAddress, FULL_ELT_BYTE_SIZE); - - /* compute number of 64-byte blocks */ - if (blocks != NULL) - { - *blocks = maxOffset != 0 ? 1 + maxOffset / 8 : 0; - - IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Wrote %d 64-byte blocks\n", *blocks); - } - - /* compute epDelta - start index for binary search */ - if (epDelta != NULL) - { - UINT32 deltaIndex = 0; - - *epDelta = 0; - - for (; deltaIndex < IX_ETH_DB_MAX_DELTA_ZONES ; deltaIndex ++) - { - if (ixEthDBEPDeltaOffset[type][deltaIndex] >= maxOffset) - { - *epDelta = ixEthDBEPDelta[type][deltaIndex]; - break; - } - } - - IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Computed epDelta %d (based on maxOffset %d)\n", *epDelta, maxOffset); - } - - ixOsalCacheDmaFree(stack); -} - -/** - * @brief implements a dummy node serialization function - * - * @param address address of where the node is to be serialized (unused) - * @param node tree node to be serialized (unused) - * - * This function is registered for safety reasons and should - * never be called. It will display an error message if this - * function is called. - * - * @return none - * - * @internal - */ -IX_ETH_DB_PRIVATE -void ixEthDBNullSerialize(void *address, MacTreeNode *node) -{ - IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Warning, the NullSerialize function was called, wrong record type?\n"); -} - -/** - * @brief writes a filtering entry in NPE linear format - * - * @param address memory address to write node to - * @param node node to be written - * - * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree - * in NPE-readable format. - * - * @internal - */ -IX_ETH_DB_PRIVATE -void ixEthDBNPELearningNodeWrite(void *address, MacTreeNode *node) -{ - /* copy mac address */ - memcpy(address, node->descriptor->macAddress, IX_IEEE803_MAC_ADDRESS_SIZE); - - /* copy port ID */ - NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_PORT_ID_OFFSET) = IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(node->descriptor->portID); - - /* copy flags (valid and not active, as the NPE sets it to active) and clear reserved section (bits 2-7) */ - NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_FLAGS_OFFSET) = (UINT8) IX_EDB_FLAGS_INACTIVE_VALID; - - IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) writing ELT node 0x%08x:0x%08x\n", * (UINT32 *) address, * (((UINT32 *) (address)) + 1)); -} - -/** - * @brief writes a WiFi header conversion record in - * NPE linear format - * - * @param address memory address to write node to - * @param node node to be written - * - * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree - * in NPE-readable format. - * - * @internal - */ -IX_ETH_DB_PRIVATE -void ixEthDBNPEWiFiNodeWrite(void *address, MacTreeNode *node) -{ - /* copy mac address */ - memcpy(address, node->descriptor->macAddress, IX_IEEE803_MAC_ADDRESS_SIZE); - - /* copy index */ - NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_WIFI_INDEX_OFFSET) = node->descriptor->recordData.wifiData.gwAddressIndex; - - /* copy flags (type and valid) */ - NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_WIFI_FLAGS_OFFSET) = node->descriptor->recordData.wifiData.type << 1 | IX_EDB_FLAGS_VALID; -} - -/** - * @brief writes a WiFi gateway header conversion record in - * NPE linear format - * - * @param address memory address to write node to - * @param node node to be written - * - * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree - * in NPE-readable format. - * - * @internal - */ -IX_ETH_DB_PUBLIC -void ixEthDBNPEGatewayNodeWrite(void *address, MacTreeNode *node) -{ - /* copy mac address */ - memcpy(address, node->descriptor->recordData.wifiData.gwMacAddress, IX_IEEE803_MAC_ADDRESS_SIZE); - - /* set reserved field, two bytes */ - NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_RESERVED_OFFSET) = 0; - NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_RESERVED_OFFSET + 1) = 0; -} - -/** - * @brief writes a firewall record in - * NPE linear format - * - * @param address memory address to write node to - * @param node node to be written - * - * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree - * in NPE-readable format. - * - * @internal - */ -IX_ETH_DB_PRIVATE -void ixEthDBNPEFirewallNodeWrite(void *address, MacTreeNode *node) -{ - /* set reserved field */ - NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_RESERVED_OFFSET) = 0; - - /* set flags */ - NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_FLAGS_OFFSET) = IX_EDB_FLAGS_VALID; - - /* copy mac address */ - memcpy((void *) ((UINT32) address + IX_EDB_NPE_NODE_FW_ADDR_OFFSET), node->descriptor->macAddress, IX_IEEE803_MAC_ADDRESS_SIZE); -} - -/** - * @brief registers the NPE serialization methods - * - * This functions registers NPE serialization methods - * for writing the following types of records in NPE - * readable linear format: - * - filtering records - * - WiFi header conversion records - * - WiFi gateway header conversion records - * - firewall records - * - * Note that this function should be called by the - * component initialization function. - * - * @return number of registered record types - * - * @internal - */ -IX_ETH_DB_PUBLIC -UINT32 ixEthDBRecordSerializeMethodsRegister() -{ - int i; - - /* safety - register a blank method for everybody first */ - for ( i = 0 ; i < IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1 ; i++) - { - ixEthDBNPENodeWrite[i] = ixEthDBNullSerialize; - } - - /* register real methods */ - ixEthDBNPENodeWrite[IX_ETH_DB_FILTERING_RECORD] = ixEthDBNPELearningNodeWrite; - ixEthDBNPENodeWrite[IX_ETH_DB_FILTERING_VLAN_RECORD] = ixEthDBNPELearningNodeWrite; - ixEthDBNPENodeWrite[IX_ETH_DB_WIFI_RECORD] = ixEthDBNPEWiFiNodeWrite; - ixEthDBNPENodeWrite[IX_ETH_DB_FIREWALL_RECORD] = ixEthDBNPEFirewallNodeWrite; - ixEthDBNPENodeWrite[IX_ETH_DB_GATEWAY_RECORD] = ixEthDBNPEGatewayNodeWrite; - - /* EP Delta arrays */ - memset(ixEthDBEPDeltaOffset, 0, sizeof (ixEthDBEPDeltaOffset)); - memset(ixEthDBEPDelta, 0, sizeof (ixEthDBEPDelta)); - - /* filtering records */ - ixEthDBEPDeltaOffset[IX_ETH_DB_FILTERING_RECORD][0] = 1; - ixEthDBEPDelta[IX_ETH_DB_FILTERING_RECORD][0] = 0; - - ixEthDBEPDeltaOffset[IX_ETH_DB_FILTERING_RECORD][1] = 3; - ixEthDBEPDelta[IX_ETH_DB_FILTERING_RECORD][1] = 7; - - ixEthDBEPDeltaOffset[IX_ETH_DB_FILTERING_RECORD][2] = 511; - ixEthDBEPDelta[IX_ETH_DB_FILTERING_RECORD][2] = 14; - - /* wifi records */ - ixEthDBEPDeltaOffset[IX_ETH_DB_WIFI_RECORD][0] = 1; - ixEthDBEPDelta[IX_ETH_DB_WIFI_RECORD][0] = 0; - - ixEthDBEPDeltaOffset[IX_ETH_DB_WIFI_RECORD][1] = 3; - ixEthDBEPDelta[IX_ETH_DB_WIFI_RECORD][1] = 7; - - ixEthDBEPDeltaOffset[IX_ETH_DB_WIFI_RECORD][2] = 511; - ixEthDBEPDelta[IX_ETH_DB_WIFI_RECORD][2] = 14; - - /* firewall records */ - ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][0] = 0; - ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][0] = 0; - - ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][1] = 1; - ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][1] = 5; - - ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][2] = 3; - ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][2] = 13; - - ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][3] = 7; - ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][3] = 21; - - ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][4] = 15; - ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][4] = 29; - - ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][5] = 31; - ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][5] = 37; - - return 5; /* 5 methods registered */ -} - -#ifndef IX_NDEBUG - -IX_ETH_DB_PUBLIC UINT32 npeMsgHistory[IX_ETH_DB_NPE_MSG_HISTORY_DEPTH][2]; -IX_ETH_DB_PUBLIC UINT32 npeMsgHistoryLen = 0; - -/** - * When compiled in DEBUG mode, this function can be used to display - * the history of messages sent to the NPEs (up to 100). - */ -IX_ETH_DB_PUBLIC -void ixEthDBShowNpeMsgHistory() -{ - UINT32 i = 0; - UINT32 base, len; - - if (npeMsgHistoryLen <= IX_ETH_DB_NPE_MSG_HISTORY_DEPTH) - { - base = 0; - len = npeMsgHistoryLen; - } - else - { - base = npeMsgHistoryLen % IX_ETH_DB_NPE_MSG_HISTORY_DEPTH; - len = IX_ETH_DB_NPE_MSG_HISTORY_DEPTH; - } - - printf("NPE message history [last %d messages, from least to most recent]:\n", len); - - for (; i < len ; i++) - { - UINT32 pos = (base + i) % IX_ETH_DB_NPE_MSG_HISTORY_DEPTH; - printf("msg[%d]: 0x%08x:0x%08x\n", i, npeMsgHistory[pos][0], npeMsgHistory[pos][1]); - } -} - -IX_ETH_DB_PUBLIC -void ixEthDBELTShow(IxEthDBPortId portID) -{ - IxNpeMhMessage message; - IX_STATUS result; - - /* send EDB_GetMACAddressDatabase message */ - FILL_GETMACADDRESSDATABASE(message, - 0 /* reserved */, - IX_OSAL_MMU_VIRT_TO_PHYS(ixEthDBPortInfo[portID].updateMethod.npeUpdateZone)); - - IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); - - if (result == IX_SUCCESS) - { - /* analyze NPE copy */ - UINT32 eltEntryOffset; - UINT32 entryPortID; - - UINT32 eltBaseAddress = (UINT32) ixEthDBPortInfo[portID].updateMethod.npeUpdateZone; - UINT32 eltSize = FULL_ELT_BYTE_SIZE; - - /* invalidate cache */ - IX_OSAL_CACHE_INVALIDATE((void *) eltBaseAddress, eltSize); - - printf("Listing records in main learning tree for port %d\n", portID); - - for (eltEntryOffset = ELT_ROOT_OFFSET ; eltEntryOffset < eltSize ; eltEntryOffset += ELT_ENTRY_SIZE) - { - /* (eltBaseAddress + eltEntryOffset) points to a valid NPE tree node - * - * the format of the node is MAC[6 bytes]:PortID[1 byte]:Reserved[6 bits]:Active[1 bit]:Valid[1 bit] - * therefore we can just use the pointer for database searches as only the first 6 bytes are checked - */ - void *eltNodeAddress = (void *) ((UINT32) eltBaseAddress + eltEntryOffset); - - if (IX_EDB_NPE_NODE_VALID(eltNodeAddress)) - { - HashNode *node; - - entryPortID = IX_ETH_DB_NPE_LOGICAL_ID_TO_PORT_ID(IX_EDB_NPE_NODE_PORT_ID(eltNodeAddress)); - - /* search record */ - node = ixEthDBSearch((IxEthDBMacAddr *) eltNodeAddress, IX_ETH_DB_ALL_RECORD_TYPES); - - printf("%s - port %d - %s ", mac2string((unsigned char *) eltNodeAddress), entryPortID, - IX_EDB_NPE_NODE_ACTIVE(eltNodeAddress) ? "active" : "inactive"); - - /* safety check, maybe user deleted record right before sync? */ - if (node != NULL) - { - /* found record */ - MacDescriptor *descriptor = (MacDescriptor *) node->data; - - printf("- %s ", - descriptor->type == IX_ETH_DB_FILTERING_RECORD ? "filtering" : - descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD ? "vlan" : - descriptor->type == IX_ETH_DB_WIFI_RECORD ? "wifi" : "other (check main DB)"); - - if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) printf("- age %d - %s ", - descriptor->recordData.filteringData.age, - descriptor->recordData.filteringData.staticEntry ? "static" : "dynamic"); - - if (descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD) printf("- age %d - %s - tci %d ", - descriptor->recordData.filteringVlanData.age, - descriptor->recordData.filteringVlanData.staticEntry ? "static" : "dynamic", - descriptor->recordData.filteringVlanData.ieee802_1qTag); - - /* end transaction */ - ixEthDBReleaseHashNode(node); - } - else - { - printf("- not synced"); - } - - printf("\n"); - } - } - } - else - { - ixOsalLog(IX_OSAL_LOG_LVL_FATAL, IX_OSAL_LOG_DEV_STDOUT, - "EthDB: (ShowELT) Could not complete action (communication failure)\n", - portID, 0, 0, 0, 0, 0); - } -} - -#endif |