1 files changed, 20 insertions, 585 deletions

diff --git a/arch/arm/cpu/tegra20-common/clock.c b/arch/arm/cpu/tegra20-common/clock.c
index 12987a6893..ec93894f48 100644
--- a/arch/arm/cpu/tegra20-common/clock.c
+++ b/arch/arm/cpu/tegra20-common/clock.c
@@ -31,24 +31,6 @@
 #include <fdtdec.h>
 
 /*
- * This is our record of the current clock rate of each clock. We don't
- * fill all of these in since we are only really interested in clocks which
- * we use as parents.
- */
-static unsigned pll_rate[CLOCK_ID_COUNT];
-
-/*
- * The oscillator frequency is fixed to one of four set values. Based on this
- * the other clocks are set up appropriately.
- */
-static unsigned osc_freq[CLOCK_OSC_FREQ_COUNT] = {
-	13000000,
-	19200000,
-	12000000,
-	26000000,
-};
-
-/*
  * Clock types that we can use as a source. The Tegra20 has muxes for the
  * peripheral clocks, and in most cases there are four options for the clock
  * source. This gives us a clock 'type' and exploits what commonality exists
@@ -76,12 +58,6 @@ enum clock_type_id {
 	CLOCK_TYPE_NONE = -1,	/* invalid clock type */
 };
 
-/* return 1 if a peripheral ID is in range */
-#define clock_type_id_isvalid(id) ((id) >= 0 && \
-		(id) < CLOCK_TYPE_COUNT)
-
-char pllp_valid = 1;	/* PLLP is set up correctly */
-
 enum {
 	CLOCK_MAX_MUX	= 4	/* number of source options for each clock */
 };
@@ -192,10 +168,6 @@ enum periphc_internal_id {
 	PERIPHC_NONE = -1,
 };
 
-/* return 1 if a periphc_internal_id is in range */
-#define periphc_internal_id_isvalid(id) ((id) >= 0 && \
-		(id) < PERIPHC_COUNT)
-
 /*
  * Clock type for each peripheral clock source. We put the name in each
  * record just so it is easy to match things up
@@ -396,19 +368,9 @@ static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
 	NONE(CRAM2),
 };
 
-/* number of clock outputs of a PLL */
-static const u8 pll_num_clkouts[] = {
-	1,	/* PLLC */
-	1,	/* PLLM */
-	4,	/* PLLP */
-	1,	/* PLLA */
-	0,	/* PLLU */
-	0,	/* PLLD */
-};
-
 /*
  * Get the oscillator frequency, from the corresponding hardware configuration
- * field.
+ * field. T20 has 4 frequencies that it supports.
  */
 enum clock_osc_freq clock_get_osc_freq(void)
 {
@@ -420,110 +382,8 @@ enum clock_osc_freq clock_get_osc_freq(void)
 	return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
 }
 
-int clock_get_osc_bypass(void)
-{
-	struct clk_rst_ctlr *clkrst =
-			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	u32 reg;
-
-	reg = readl(&clkrst->crc_osc_ctrl);
-	return (reg & OSC_XOBP_MASK) >> OSC_XOBP_SHIFT;
-}
-
-/* Returns a pointer to the registers of the given pll */
-static struct clk_pll *get_pll(enum clock_id clkid)
-{
-	struct clk_rst_ctlr *clkrst =
-			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-
-	assert(clock_id_is_pll(clkid));
-	return &clkrst->crc_pll[clkid];
-}
-
-int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,
-		u32 *divp, u32 *cpcon, u32 *lfcon)
-{
-	struct clk_pll *pll = get_pll(clkid);
-	u32 data;
-
-	assert(clkid != CLOCK_ID_USB);
-
-	/* Safety check, adds to code size but is small */
-	if (!clock_id_is_pll(clkid) || clkid == CLOCK_ID_USB)
-		return -1;
-	data = readl(&pll->pll_base);
-	*divm = (data & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
-	*divn = (data & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT;
-	*divp = (data & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
-	data = readl(&pll->pll_misc);
-	*cpcon = (data & PLL_CPCON_MASK) >> PLL_CPCON_SHIFT;
-	*lfcon = (data & PLL_LFCON_MASK) >> PLL_LFCON_SHIFT;
-
-	return 0;
-}
-
-unsigned long clock_start_pll(enum clock_id clkid, u32 divm, u32 divn,
-		u32 divp, u32 cpcon, u32 lfcon)
-{
-	struct clk_pll *pll = get_pll(clkid);
-	u32 data;
-
-	/*
-	 * We cheat by treating all PLL (except PLLU) in the same fashion.
-	 * This works only because:
-	 * - same fields are always mapped at same offsets, except DCCON
-	 * - DCCON is always 0, doesn't conflict
-	 * - M,N, P of PLLP values are ignored for PLLP
-	 */
-	data = (cpcon << PLL_CPCON_SHIFT) | (lfcon << PLL_LFCON_SHIFT);
-	writel(data, &pll->pll_misc);
-
-	data = (divm << PLL_DIVM_SHIFT) | (divn << PLL_DIVN_SHIFT) |
-			(0 << PLL_BYPASS_SHIFT) | (1 << PLL_ENABLE_SHIFT);
-
-	if (clkid == CLOCK_ID_USB)
-		data |= divp << PLLU_VCO_FREQ_SHIFT;
-	else
-		data |= divp << PLL_DIVP_SHIFT;
-	writel(data, &pll->pll_base);
-
-	/* calculate the stable time */
-	return timer_get_us() + CLOCK_PLL_STABLE_DELAY_US;
-}
-
-/* return 1 if a peripheral ID is in range and valid */
-static int clock_periph_id_isvalid(enum periph_id id)
-{
-	if (id < PERIPH_ID_FIRST || id >= PERIPH_ID_COUNT)
-		printf("Peripheral id %d out of range\n", id);
-	else {
-		switch (id) {
-		case PERIPH_ID_RESERVED1:
-		case PERIPH_ID_RESERVED2:
-		case PERIPH_ID_RESERVED30:
-		case PERIPH_ID_RESERVED35:
-		case PERIPH_ID_RESERVED56:
-		case PERIPH_ID_RESERVED74:
-		case PERIPH_ID_RESERVED76:
-		case PERIPH_ID_RESERVED77:
-		case PERIPH_ID_RESERVED78:
-		case PERIPH_ID_RESERVED79:
-		case PERIPH_ID_RESERVED80:
-		case PERIPH_ID_RESERVED81:
-		case PERIPH_ID_RESERVED82:
-		case PERIPH_ID_RESERVED83:
-		case PERIPH_ID_RESERVED91:
-			printf("Peripheral id %d is reserved\n", id);
-			break;
-		default:
-			return 1;
-		}
-	}
-	return 0;
-}
-
 /* Returns a pointer to the clock source register for a peripheral */
-static u32 *get_periph_source_reg(enum periph_id periph_id)
+u32 *get_periph_source_reg(enum periph_id periph_id)
 {
 	struct clk_rst_ctlr *clkrst =
 			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
@@ -535,154 +395,6 @@ static u32 *get_periph_source_reg(enum periph_id periph_id)
 	return &clkrst->crc_clk_src[internal_id];
 }
 
-void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
-			      unsigned divisor)
-{
-	u32 *reg = get_periph_source_reg(periph_id);
-	u32 value;
-
-	value = readl(reg);
-
-	value &= ~OUT_CLK_SOURCE_MASK;
-	value |= source << OUT_CLK_SOURCE_SHIFT;
-
-	value &= ~OUT_CLK_DIVISOR_MASK;
-	value |= divisor << OUT_CLK_DIVISOR_SHIFT;
-
-	writel(value, reg);
-}
-
-void clock_ll_set_source(enum periph_id periph_id, unsigned source)
-{
-	u32 *reg = get_periph_source_reg(periph_id);
-
-	clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
-			source << OUT_CLK_SOURCE_SHIFT);
-}
-
-/**
- * Given the parent's rate and the required rate for the children, this works
- * out the peripheral clock divider to use, in 7.1 binary format.
- *
- * @param divider_bits	number of divider bits (8 or 16)
- * @param parent_rate	clock rate of parent clock in Hz
- * @param rate		required clock rate for this clock
- * @return divider which should be used
- */
-static int clk_get_divider(unsigned divider_bits, unsigned long parent_rate,
-			   unsigned long rate)
-{
-	u64 divider = parent_rate * 2;
-	unsigned max_divider = 1 << divider_bits;
-
-	divider += rate - 1;
-	do_div(divider, rate);
-
-	if ((s64)divider - 2 < 0)
-		return 0;
-
-	if ((s64)divider - 2 >= max_divider)
-		return -1;
-
-	return divider - 2;
-}
-
-/**
- * Given the parent's rate and the divider in 7.1 format, this works out the
- * resulting peripheral clock rate.
- *
- * @param parent_rate	clock rate of parent clock in Hz
- * @param divider which should be used in 7.1 format
- * @return effective clock rate of peripheral
- */
-static unsigned long get_rate_from_divider(unsigned long parent_rate,
-					   int divider)
-{
-	u64 rate;
-
-	rate = (u64)parent_rate * 2;
-	do_div(rate, divider + 2);
-	return rate;
-}
-
-unsigned long clock_get_periph_rate(enum periph_id periph_id,
-		enum clock_id parent)
-{
-	u32 *reg = get_periph_source_reg(periph_id);
-
-	return get_rate_from_divider(pll_rate[parent],
-		(readl(reg) & OUT_CLK_DIVISOR_MASK) >> OUT_CLK_DIVISOR_SHIFT);
-}
-
-int clock_set_pllout(enum clock_id clkid, enum pll_out_id pllout, unsigned rate)
-{
-	struct clk_pll *pll = get_pll(clkid);
-	int data = 0, div = 0, offset = 0;
-
-	if (!clock_id_is_pll(clkid))
-		return -1;
-
-	if (pllout + 1 > pll_num_clkouts[clkid])
-		return -1;
-
-	div = clk_get_divider(8, pll_rate[clkid], rate);
-
-	if (div < 0)
-		return -1;
-
-	/* out2 and out4 are in the high part of the register */
-	if (pllout == PLL_OUT2 || pllout == PLL_OUT4)
-		offset = 16;
-
-	data = (div << PLL_OUT_RATIO_SHIFT) |
-			PLL_OUT_OVRRIDE | PLL_OUT_CLKEN | PLL_OUT_RSTN;
-	clrsetbits_le32(&pll->pll_out[pllout >> 1],
-			PLL_OUT_RATIO_MASK << offset, data << offset);
-
-	return 0;
-}
-
-/**
- * Find the best available 7.1 format divisor given a parent clock rate and
- * required child clock rate. This function assumes that a second-stage
- * divisor is available which can divide by powers of 2 from 1 to 256.
- *
- * @param divider_bits	number of divider bits (8 or 16)
- * @param parent_rate	clock rate of parent clock in Hz
- * @param rate		required clock rate for this clock
- * @param extra_div	value for the second-stage divisor (not set if this
- *			function returns -1.
- * @return divider which should be used, or -1 if nothing is valid
- *
- */
-static int find_best_divider(unsigned divider_bits, unsigned long parent_rate,
-			     unsigned long rate, int *extra_div)
-{
-	int shift;
-	int best_divider = -1;
-	int best_error = rate;
-
-	/* try dividers from 1 to 256 and find closest match */
-	for (shift = 0; shift <= 8 && best_error > 0; shift++) {
-		unsigned divided_parent = parent_rate >> shift;
-		int divider = clk_get_divider(divider_bits, divided_parent,
-					      rate);
-		unsigned effective_rate = get_rate_from_divider(divided_parent,
-						       divider);
-		int error = rate - effective_rate;
-
-		/* Given a valid divider, look for the lowest error */
-		if (divider != -1 && error < best_error) {
-			best_error = error;
-			*extra_div = 1 << shift;
-			best_divider = divider;
-		}
-	}
-
-	/* return what we found - *extra_div will already be set */
-	return best_divider;
-}
-
 /**
  * Given a peripheral ID and the required source clock, this returns which
  * value should be programmed into the source mux for that peripheral.
@@ -695,7 +407,7 @@ static int find_best_divider(unsigned divider_bits, unsigned long parent_rate,
  * @param divider_bits	Set to number of divider bits (8 or 16)
  * @return mux value (0-4, or -1 if not found)
  */
-static int get_periph_clock_source(enum periph_id periph_id,
+int get_periph_clock_source(enum periph_id periph_id,
 		enum clock_id parent, int *mux_bits, int *divider_bits)
 {
 	enum clock_type_id type;
@@ -743,88 +455,6 @@ static int get_periph_clock_source(enum periph_id periph_id,
 	return -1;
 }
 
-/**
- * Adjust peripheral PLL to use the given divider and source.
- *
- * @param periph_id	peripheral to adjust
- * @param source	Source number (0-3 or 0-7)
- * @param mux_bits	Number of mux bits (2 or 4)
- * @param divider	Required divider in 7.1 or 15.1 format
- * @return 0 if ok, -1 on error (requesting a parent clock which is not valid
- *		for this peripheral)
- */
-static int adjust_periph_pll(enum periph_id periph_id, int source,
-			     int mux_bits, unsigned divider)
-{
-	u32 *reg = get_periph_source_reg(periph_id);
-
-	clrsetbits_le32(reg, OUT_CLK_DIVISOR_MASK,
-			divider << OUT_CLK_DIVISOR_SHIFT);
-	udelay(1);
-
-	/* work out the source clock and set it */
-	if (source < 0)
-		return -1;
-	if (mux_bits == 4) {
-		clrsetbits_le32(reg, OUT_CLK_SOURCE4_MASK,
-			source << OUT_CLK_SOURCE4_SHIFT);
-	} else {
-		clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
-			source << OUT_CLK_SOURCE_SHIFT);
-	}
-	udelay(2);
-	return 0;
-}
-
-unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
-		enum clock_id parent, unsigned rate, int *extra_div)
-{
-	unsigned effective_rate;
-	int mux_bits, divider_bits, source;
-	int divider;
-
-	/* work out the source clock and set it */
-	source = get_periph_clock_source(periph_id, parent, &mux_bits,
-					 &divider_bits);
-
-	if (extra_div)
-		divider = find_best_divider(divider_bits, pll_rate[parent],
-					    rate, extra_div);
-	else
-		divider = clk_get_divider(divider_bits, pll_rate[parent],
-					  rate);
-	assert(divider >= 0);
-	if (adjust_periph_pll(periph_id, source, mux_bits, divider))
-		return -1U;
-	debug("periph %d, rate=%d, reg=%p = %x\n", periph_id, rate,
-		get_periph_source_reg(periph_id),
-		readl(get_periph_source_reg(periph_id)));
-
-	/* Check what we ended up with. This shouldn't matter though */
-	effective_rate = clock_get_periph_rate(periph_id, parent);
-	if (extra_div)
-		effective_rate /= *extra_div;
-	if (rate != effective_rate)
-		debug("Requested clock rate %u not honored (got %u)\n",
-		       rate, effective_rate);
-	return effective_rate;
-}
-
-unsigned clock_start_periph_pll(enum periph_id periph_id,
-		enum clock_id parent, unsigned rate)
-{
-	unsigned effective_rate;
-
-	reset_set_enable(periph_id, 1);
-	clock_enable(periph_id);
-
-	effective_rate = clock_adjust_periph_pll_div(periph_id, parent, rate,
-						 NULL);
-
-	reset_set_enable(periph_id, 0);
-	return effective_rate;
-}
-
 void clock_set_enable(enum periph_id periph_id, int enable)
 {
 	struct clk_rst_ctlr *clkrst =
@@ -842,16 +472,6 @@ void clock_set_enable(enum periph_id periph_id, int enable)
 	writel(reg, clk);
 }
 
-void clock_enable(enum periph_id clkid)
-{
-	clock_set_enable(clkid, 1);
-}
-
-void clock_disable(enum periph_id clkid)
-{
-	clock_set_enable(clkid, 0);
-}
-
 void reset_set_enable(enum periph_id periph_id, int enable)
 {
 	struct clk_rst_ctlr *clkrst =
@@ -869,146 +489,6 @@ void reset_set_enable(enum periph_id periph_id, int enable)
 	writel(reg, reset);
 }
 
-void reset_periph(enum periph_id periph_id, int us_delay)
-{
-	/* Put peripheral into reset */
-	reset_set_enable(periph_id, 1);
-	udelay(us_delay);
-
-	/* Remove reset */
-	reset_set_enable(periph_id, 0);
-
-	udelay(us_delay);
-}
-
-void reset_cmplx_set_enable(int cpu, int which, int reset)
-{
-	struct clk_rst_ctlr *clkrst =
-			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	u32 mask;
-
-	/* Form the mask, which depends on the cpu chosen. Tegra20 has 2 */
-	assert(cpu >= 0 && cpu < 2);
-	mask = which << cpu;
-
-	/* either enable or disable those reset for that CPU */
-	if (reset)
-		writel(mask, &clkrst->crc_cpu_cmplx_set);
-	else
-		writel(mask, &clkrst->crc_cpu_cmplx_clr);
-}
-
-unsigned clock_get_rate(enum clock_id clkid)
-{
-	struct clk_pll *pll;
-	u32 base;
-	u32 divm;
-	u64 parent_rate;
-	u64 rate;
-
-	parent_rate = osc_freq[clock_get_osc_freq()];
-	if (clkid == CLOCK_ID_OSC)
-		return parent_rate;
-
-	pll = get_pll(clkid);
-	base = readl(&pll->pll_base);
-
-	/* Oh for bf_unpack()... */
-	rate = parent_rate * ((base & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT);
-	divm = (base & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
-	if (clkid == CLOCK_ID_USB)
-		divm <<= (base & PLLU_VCO_FREQ_MASK) >> PLLU_VCO_FREQ_SHIFT;
-	else
-		divm <<= (base & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
-	do_div(rate, divm);
-	return rate;
-}
-
-/**
- * Set the output frequency you want for each PLL clock.
- * PLL output frequencies are programmed by setting their N, M and P values.
- * The governing equations are:
- *     VCO = (Fi / m) * n, Fo = VCO / (2^p)
- *     where Fo is the output frequency from the PLL.
- * Example: Set the output frequency to 216Mhz(Fo) with 12Mhz OSC(Fi)
- *     216Mhz = ((12Mhz / m) * n) / (2^p) so n=432,m=12,p=1
- * Please see Tegra TRM section 5.3 to get the detail for PLL Programming
- *
- * @param n PLL feedback divider(DIVN)
- * @param m PLL input divider(DIVN)
- * @param p post divider(DIVP)
- * @param cpcon base PLL charge pump(CPCON)
- * @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
- *		be overriden), 1 if PLL is already correct
- */
-static int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon)
-{
-	u32 base_reg;
-	u32 misc_reg;
-	struct clk_pll *pll;
-
-	pll = get_pll(clkid);
-
-	base_reg = readl(&pll->pll_base);
-
-	/* Set BYPASS, m, n and p to PLL_BASE */
-	base_reg &= ~PLL_DIVM_MASK;
-	base_reg |= m << PLL_DIVM_SHIFT;
-
-	base_reg &= ~PLL_DIVN_MASK;
-	base_reg |= n << PLL_DIVN_SHIFT;
-
-	base_reg &= ~PLL_DIVP_MASK;
-	base_reg |= p << PLL_DIVP_SHIFT;
-
-	if (clkid == CLOCK_ID_PERIPH) {
-		/*
-		 * If the PLL is already set up, check that it is correct
-		 * and record this info for clock_verify() to check.
-		 */
-		if (base_reg & PLL_BASE_OVRRIDE_MASK) {
-			base_reg |= PLL_ENABLE_MASK;
-			if (base_reg != readl(&pll->pll_base))
-				pllp_valid = 0;
-			return pllp_valid ? 1 : -1;
-		}
-		base_reg |= PLL_BASE_OVRRIDE_MASK;
-	}
-
-	base_reg |= PLL_BYPASS_MASK;
-	writel(base_reg, &pll->pll_base);
-
-	/* Set cpcon to PLL_MISC */
-	misc_reg = readl(&pll->pll_misc);
-	misc_reg &= ~PLL_CPCON_MASK;
-	misc_reg |= cpcon << PLL_CPCON_SHIFT;
-	writel(misc_reg, &pll->pll_misc);
-
-	/* Enable PLL */
-	base_reg |= PLL_ENABLE_MASK;
-	writel(base_reg, &pll->pll_base);
-
-	/* Disable BYPASS */
-	base_reg &= ~PLL_BYPASS_MASK;
-	writel(base_reg, &pll->pll_base);
-
-	return 0;
-}
-
-void clock_ll_start_uart(enum periph_id periph_id)
-{
-	/* Assert UART reset and enable clock */
-	reset_set_enable(periph_id, 1);
-	clock_enable(periph_id);
-	clock_ll_set_source(periph_id, 0); /* UARTx_CLK_SRC = 00, PLLP_OUT0 */
-
-	/* wait for 2us */
-	udelay(2);
-
-	/* De-assert reset to UART */
-	reset_set_enable(periph_id, 0);
-}
-
 #ifdef CONFIG_OF_CONTROL
 /*
  * Convert a device tree clock ID to our peripheral ID. They are mostly
@@ -1018,67 +498,34 @@ void clock_ll_start_uart(enum periph_id periph_id)
  * @param clk_id	Clock ID according to tegra20 device tree binding
  * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
  */
-static enum periph_id clk_id_to_periph_id(int clk_id)
+enum periph_id clk_id_to_periph_id(int clk_id)
 {
-	if (clk_id > 95)
+	if (clk_id > PERIPH_ID_COUNT)
 		return PERIPH_ID_NONE;
 
 	switch (clk_id) {
-	case 1:
-	case 2:
-	case 7:
-	case 10:
-	case 20:
-	case 30:
-	case 35:
-	case 49:
-	case 56:
-	case 74:
-	case 76:
-	case 77:
-	case 78:
-	case 79:
-	case 80:
-	case 81:
-	case 82:
-	case 83:
-	case 91:
-	case 95:
+	case PERIPH_ID_RESERVED1:
+	case PERIPH_ID_RESERVED2:
+	case PERIPH_ID_RESERVED30:
+	case PERIPH_ID_RESERVED35:
+	case PERIPH_ID_RESERVED56:
+	case PERIPH_ID_RESERVED74:
+	case PERIPH_ID_RESERVED76:
+	case PERIPH_ID_RESERVED77:
+	case PERIPH_ID_RESERVED78:
+	case PERIPH_ID_RESERVED79:
+	case PERIPH_ID_RESERVED80:
+	case PERIPH_ID_RESERVED81:
+	case PERIPH_ID_RESERVED82:
+	case PERIPH_ID_RESERVED83:
+	case PERIPH_ID_RESERVED91:
 		return PERIPH_ID_NONE;
 	default:
 		return clk_id;
 	}
 }
-
-int clock_decode_periph_id(const void *blob, int node)
-{
-	enum periph_id id;
-	u32 cell[2];
-	int err;
-
-	err = fdtdec_get_int_array(blob, node, "clocks", cell,
-				   ARRAY_SIZE(cell));
-	if (err)
-		return -1;
-	id = clk_id_to_periph_id(cell[1]);
-	assert(clock_periph_id_isvalid(id));
-	return id;
-}
 #endif /* CONFIG_OF_CONTROL */
 
-int clock_verify(void)
-{
-	struct clk_pll *pll = get_pll(CLOCK_ID_PERIPH);
-	u32 reg = readl(&pll->pll_base);
-
-	if (!pllp_valid) {
-		printf("Warning: PLLP %x is not correct\n", reg);
-		return -1;
-	}
-	debug("PLLX %x is correct\n", reg);
-	return 0;
-}
-
 void clock_early_init(void)
 {
 	/*
@@ -1112,15 +559,3 @@ void clock_early_init(void)
 		break;
 	}
 }
-
-void clock_init(void)
-{
-	pll_rate[CLOCK_ID_MEMORY] = clock_get_rate(CLOCK_ID_MEMORY);
-	pll_rate[CLOCK_ID_PERIPH] = clock_get_rate(CLOCK_ID_PERIPH);
-	pll_rate[CLOCK_ID_CGENERAL] = clock_get_rate(CLOCK_ID_CGENERAL);
-	pll_rate[CLOCK_ID_OSC] = clock_get_rate(CLOCK_ID_OSC);
-	pll_rate[CLOCK_ID_SFROM32KHZ] = 32768;
-	debug("Osc = %d\n", pll_rate[CLOCK_ID_OSC]);
-	debug("PLLM = %d\n", pll_rate[CLOCK_ID_MEMORY]);
-	debug("PLLP = %d\n", pll_rate[CLOCK_ID_PERIPH]);
-}