diff options
Diffstat (limited to 'arch/arm/cpu')
| -rw-r--r-- | arch/arm/cpu/arm1136/mx31/timer.c | 104 | ||||
| -rw-r--r-- | arch/arm/cpu/arm1136/mx35/timer.c | 83 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 13 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/exynos/Kconfig | 1 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/mx6/clock.c | 27 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/mx6/hab.c | 169 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/mx6/soc.c | 39 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S | 22 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/s5pc1xx/Kconfig | 25 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/s5pc1xx/cache.S | 30 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/s5pc1xx/cache.c | 47 |
11 files changed, 329 insertions, 231 deletions
diff --git a/arch/arm/cpu/arm1136/mx31/timer.c b/arch/arm/cpu/arm1136/mx31/timer.c index f111242e53..3a81ce427c 100644 --- a/arch/arm/cpu/arm1136/mx31/timer.c +++ b/arch/arm/cpu/arm1136/mx31/timer.c @@ -7,9 +7,6 @@ #include <common.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/clock.h> -#include <div64.h> -#include <watchdog.h> #include <asm/io.h> #define TIMER_BASE 0x53f90000 /* General purpose timer 1 */ @@ -28,57 +25,6 @@ DECLARE_GLOBAL_DATA_PTR; -/* - * "time" is measured in 1 / CONFIG_SYS_HZ seconds, - * "tick" is internal timer period - */ - -#ifdef CONFIG_MX31_TIMER_HIGH_PRECISION -/* ~0.4% error - measured with stop-watch on 100s boot-delay */ -static inline unsigned long long tick_to_time(unsigned long long tick) -{ - tick *= CONFIG_SYS_HZ; - do_div(tick, MXC_CLK32); - return tick; -} - -static inline unsigned long long time_to_tick(unsigned long long time) -{ - time *= MXC_CLK32; - do_div(time, CONFIG_SYS_HZ); - return time; -} - -static inline unsigned long long us_to_tick(unsigned long long us) -{ - us = us * MXC_CLK32 + 999999; - do_div(us, 1000000); - return us; -} -#else -/* ~2% error */ -#define TICK_PER_TIME ((MXC_CLK32 + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ) -#define US_PER_TICK (1000000 / MXC_CLK32) - -static inline unsigned long long tick_to_time(unsigned long long tick) -{ - do_div(tick, TICK_PER_TIME); - return tick; -} - -static inline unsigned long long time_to_tick(unsigned long long time) -{ - return time * TICK_PER_TIME; -} - -static inline unsigned long long us_to_tick(unsigned long long us) -{ - us += US_PER_TICK - 1; - do_div(us, US_PER_TICK); - return us; -} -#endif - /* The 32768Hz 32-bit timer overruns in 131072 seconds */ int timer_init(void) { @@ -95,53 +41,7 @@ int timer_init(void) return 0; } -unsigned long long get_ticks(void) -{ - ulong now = GPTCNT; /* current tick value */ - - if (now >= gd->arch.lastinc) /* normal mode (non roll) */ - /* move stamp forward with absolut diff ticks */ - gd->arch.tbl += (now - gd->arch.lastinc); - else /* we have rollover of incrementer */ - gd->arch.tbl += (0xFFFFFFFF - gd->arch.lastinc) + now; - gd->arch.lastinc = now; - return gd->arch.tbl; -} - -ulong get_timer_masked(void) -{ - /* - * get_ticks() returns a long long (64 bit), it wraps in - * 2^64 / MXC_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~ - * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in - * 5 * 10^6 days - long enough. - */ - return tick_to_time(get_ticks()); -} - -ulong get_timer(ulong base) -{ - return get_timer_masked() - base; -} - -/* delay x useconds AND preserve advance timestamp value */ -void __udelay(unsigned long usec) -{ - unsigned long long tmp; - ulong tmo; - - tmo = us_to_tick(usec); - tmp = get_ticks() + tmo; /* get current timestamp */ - - while (get_ticks() < tmp) /* loop till event */ - /*NOP*/; -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) +unsigned long timer_read_counter(void) { - return MXC_CLK32; + return GPTCNT; } diff --git a/arch/arm/cpu/arm1136/mx35/timer.c b/arch/arm/cpu/arm1136/mx35/timer.c index cc6166f938..4edf533e2a 100644 --- a/arch/arm/cpu/arm1136/mx35/timer.c +++ b/arch/arm/cpu/arm1136/mx35/timer.c @@ -9,16 +9,11 @@ #include <common.h> #include <asm/io.h> -#include <div64.h> #include <asm/arch/imx-regs.h> #include <asm/arch/crm_regs.h> -#include <asm/arch/clock.h> DECLARE_GLOBAL_DATA_PTR; -#define timestamp (gd->arch.tbl) -#define lastinc (gd->arch.lastinc) - /* General purpose timers bitfields */ #define GPTCR_SWR (1<<15) /* Software reset */ #define GPTCR_FRR (1<<9) /* Freerun / restart */ @@ -26,27 +21,6 @@ DECLARE_GLOBAL_DATA_PTR; #define GPTCR_TEN (1) /* Timer enable */ /* - * "time" is measured in 1 / CONFIG_SYS_HZ seconds, - * "tick" is internal timer period - */ -/* ~0.4% error - measured with stop-watch on 100s boot-delay */ -static inline unsigned long long tick_to_time(unsigned long long tick) -{ - tick *= CONFIG_SYS_HZ; - do_div(tick, MXC_CLK32); - - return tick; -} - -static inline unsigned long long us_to_tick(unsigned long long us) -{ - us = us * MXC_CLK32 + 999999; - do_div(us, 1000000); - - return us; -} - -/* * nothing really to do with interrupts, just starts up a counter. * The 32KHz 32-bit timer overruns in 134217 seconds */ @@ -71,60 +45,3 @@ int timer_init(void) return 0; } - -unsigned long long get_ticks(void) -{ - struct gpt_regs *gpt = (struct gpt_regs *)GPT1_BASE_ADDR; - ulong now = readl(&gpt->counter); /* current tick value */ - - if (now >= lastinc) { - /* - * normal mode (non roll) - * move stamp forward with absolut diff ticks - */ - timestamp += (now - lastinc); - } else { - /* we have rollover of incrementer */ - timestamp += (0xFFFFFFFF - lastinc) + now; - } - lastinc = now; - return timestamp; -} - -ulong get_timer_masked(void) -{ - /* - * get_ticks() returns a long long (64 bit), it wraps in - * 2^64 / MXC_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~ - * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in - * 5 * 10^6 days - long enough. - */ - return tick_to_time(get_ticks()); -} - -ulong get_timer(ulong base) -{ - return get_timer_masked() - base; -} - -/* delay x useconds AND preserve advance timstamp value */ -void __udelay(unsigned long usec) -{ - unsigned long long tmp; - ulong tmo; - - tmo = us_to_tick(usec); - tmp = get_ticks() + tmo; /* get current timestamp */ - - while (get_ticks() < tmp) /* loop till event */ - /*NOP*/; -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - return MXC_CLK32; -} diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index 3baf4ddefc..97ef67d8c5 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -240,9 +240,14 @@ static void mx23_mem_setup_vddmem(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + /* We must wait before and after disabling the current limiter! */ + early_delay(10000); + clrbits_le32(&power_regs->hw_power_vddmemctrl, POWER_VDDMEMCTRL_ENABLE_ILIMIT); + early_delay(10000); + } static void mx23_mem_init(void) @@ -269,7 +274,13 @@ static void mx23_mem_init(void) setbits_le32(MXS_DRAM_BASE + 0x20, 1 << 16); clrbits_le32(MXS_DRAM_BASE + 0x40, 1 << 17); - early_delay(20000); + + /* Wait for EMI_STAT bit DRAM_HALTED */ + for (;;) { + if (!(readl(MXS_EMI_BASE + 0x10) & (1 << 1))) + break; + early_delay(1000); + } /* Adjust EMI port priority. */ clrsetbits_le32(0x80020000, 0x1f << 16, 0x2); diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig index e7c93d8c1f..7a0d182e5f 100644 --- a/arch/arm/cpu/armv7/exynos/Kconfig +++ b/arch/arm/cpu/armv7/exynos/Kconfig @@ -5,6 +5,7 @@ choice config TARGET_SMDKV310 bool "Exynos4210 SMDKV310 board" + select OF_CONTROL if !SPL_BUILD config TARGET_TRATS bool "Exynos4210 Trats board" diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index 336e557a27..d200531030 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -642,6 +642,33 @@ int enable_pcie_clock(void) BM_ANADIG_PLL_ENET_ENABLE_PCIE); } +#ifdef CONFIG_SECURE_BOOT +void hab_caam_clock_enable(unsigned char enable) +{ + u32 reg; + + /* CG4 ~ CG6, CAAM clocks */ + reg = __raw_readl(&imx_ccm->CCGR0); + if (enable) + reg |= (MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK | + MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK | + MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK); + else + reg &= ~(MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK | + MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK | + MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK); + __raw_writel(reg, &imx_ccm->CCGR0); + + /* EMI slow clk */ + reg = __raw_readl(&imx_ccm->CCGR6); + if (enable) + reg |= MXC_CCM_CCGR6_EMI_SLOW_MASK; + else + reg &= ~MXC_CCM_CCGR6_EMI_SLOW_MASK; + __raw_writel(reg, &imx_ccm->CCGR6); +} +#endif + unsigned int mxc_get_clock(enum mxc_clock clk) { switch (clk) { diff --git a/arch/arm/cpu/armv7/mx6/hab.c b/arch/arm/cpu/armv7/mx6/hab.c index f6810a680d..8dee595eaf 100644 --- a/arch/arm/cpu/armv7/mx6/hab.c +++ b/arch/arm/cpu/armv7/mx6/hab.c @@ -1,12 +1,14 @@ /* - * Copyright (C) 2010-2013 Freescale Semiconductor, Inc. + * Copyright (C) 2010-2014 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> #include <asm/io.h> +#include <asm/system.h> #include <asm/arch/hab.h> +#include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> /* -------- start of HAB API updates ------------*/ @@ -71,6 +73,44 @@ ((hab_rvt_exit_t *)HAB_RVT_EXIT) \ ) +#define IVT_SIZE 0x20 +#define ALIGN_SIZE 0x1000 +#define CSF_PAD_SIZE 0x2000 +#define MX6DQ_PU_IROM_MMU_EN_VAR 0x009024a8 +#define MX6DLS_PU_IROM_MMU_EN_VAR 0x00901dd0 +#define MX6SL_PU_IROM_MMU_EN_VAR 0x00900a18 + +/* + * +------------+ 0x0 (DDR_UIMAGE_START) - + * | Header | | + * +------------+ 0x40 | + * | | | + * | | | + * | | | + * | | | + * | Image Data | | + * . | | + * . | > Stuff to be authenticated ----+ + * . | | | + * | | | | + * | | | | + * +------------+ | | + * | | | | + * | Fill Data | | | + * | | | | + * +------------+ Align to ALIGN_SIZE | | + * | IVT | | | + * +------------+ + IVT_SIZE - | + * | | | + * | CSF DATA | <---------------------------------------------------------+ + * | | + * +------------+ + * | | + * | Fill Data | + * | | + * +------------+ + CSF_PAD_SIZE + */ + bool is_hab_enabled(void) { struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; @@ -144,6 +184,108 @@ int get_hab_status(void) return 0; } +uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size) +{ + uint32_t load_addr = 0; + size_t bytes; + ptrdiff_t ivt_offset = 0; + int result = 0; + ulong start; + hab_rvt_authenticate_image_t *hab_rvt_authenticate_image; + hab_rvt_entry_t *hab_rvt_entry; + hab_rvt_exit_t *hab_rvt_exit; + + hab_rvt_authenticate_image = hab_rvt_authenticate_image_p; + hab_rvt_entry = hab_rvt_entry_p; + hab_rvt_exit = hab_rvt_exit_p; + + if (is_hab_enabled()) { + printf("\nAuthenticate image from DDR location 0x%x...\n", + ddr_start); + + hab_caam_clock_enable(1); + + if (hab_rvt_entry() == HAB_SUCCESS) { + /* If not already aligned, Align to ALIGN_SIZE */ + ivt_offset = (image_size + ALIGN_SIZE - 1) & + ~(ALIGN_SIZE - 1); + + start = ddr_start; + bytes = ivt_offset + IVT_SIZE + CSF_PAD_SIZE; +#ifdef DEBUG + printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n", + ivt_offset, ddr_start + ivt_offset); + puts("Dumping IVT\n"); + print_buffer(ddr_start + ivt_offset, + (void *)(ddr_start + ivt_offset), + 4, 0x8, 0); + + puts("Dumping CSF Header\n"); + print_buffer(ddr_start + ivt_offset+IVT_SIZE, + (void *)(ddr_start + ivt_offset+IVT_SIZE), + 4, 0x10, 0); + + get_hab_status(); + + puts("\nCalling authenticate_image in ROM\n"); + printf("\tivt_offset = 0x%x\n", ivt_offset); + printf("\tstart = 0x%08lx\n", start); + printf("\tbytes = 0x%x\n", bytes); +#endif + /* + * If the MMU is enabled, we have to notify the ROM + * code, or it won't flush the caches when needed. + * This is done, by setting the "pu_irom_mmu_enabled" + * word to 1. You can find its address by looking in + * the ROM map. This is critical for + * authenticate_image(). If MMU is enabled, without + * setting this bit, authentication will fail and may + * crash. + */ + /* Check MMU enabled */ + if (get_cr() & CR_M) { + if (is_cpu_type(MXC_CPU_MX6Q) || + is_cpu_type(MXC_CPU_MX6D)) { + /* + * This won't work on Rev 1.0.0 of + * i.MX6Q/D, since their ROM doesn't + * do cache flushes. don't think any + * exist, so we ignore them. + */ + writel(1, MX6DQ_PU_IROM_MMU_EN_VAR); + } else if (is_cpu_type(MXC_CPU_MX6DL) || + is_cpu_type(MXC_CPU_MX6SOLO)) { + writel(1, MX6DLS_PU_IROM_MMU_EN_VAR); + } else if (is_cpu_type(MXC_CPU_MX6SL)) { + writel(1, MX6SL_PU_IROM_MMU_EN_VAR); + } + } + + load_addr = (uint32_t)hab_rvt_authenticate_image( + HAB_CID_UBOOT, + ivt_offset, (void **)&start, + (size_t *)&bytes, NULL); + if (hab_rvt_exit() != HAB_SUCCESS) { + puts("hab exit function fail\n"); + load_addr = 0; + } + } else { + puts("hab entry function fail\n"); + } + + hab_caam_clock_enable(0); + + get_hab_status(); + } else { + puts("hab fuse not enabled\n"); + } + + if ((!is_hab_enabled()) || (load_addr != 0)) + result = 1; + + return result; +} + int do_hab_status(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { if ((argc != 1)) { @@ -156,8 +298,33 @@ int do_hab_status(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } +static int do_authenticate_image(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + ulong addr, ivt_offset; + int rcode = 0; + + if (argc < 3) + return CMD_RET_USAGE; + + addr = simple_strtoul(argv[1], NULL, 16); + ivt_offset = simple_strtoul(argv[2], NULL, 16); + + rcode = authenticate_image(addr, ivt_offset); + + return rcode; +} + U_BOOT_CMD( hab_status, CONFIG_SYS_MAXARGS, 1, do_hab_status, "display HAB status", "" ); + +U_BOOT_CMD( + hab_auth_img, 3, 0, do_authenticate_image, + "authenticate image via HAB", + "addr ivt_offset\n" + "addr - image hex address\n" + "ivt_offset - hex offset of IVT in the image" + ); diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index ba21cfe580..6352422253 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -273,10 +273,25 @@ int board_postclk_init(void) #ifndef CONFIG_SYS_DCACHE_OFF void enable_caches(void) { +#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH) + enum dcache_option option = DCACHE_WRITETHROUGH; +#else + enum dcache_option option = DCACHE_WRITEBACK; +#endif + /* Avoid random hang when download by usb */ invalidate_dcache_all(); + /* Enable D-cache. I-cache is already enabled in start.S */ dcache_enable(); + + /* Enable caching on OCRAM and ROM */ + mmu_set_region_dcache_behaviour(ROMCP_ARB_BASE_ADDR, + ROMCP_ARB_END_ADDR, + option); + mmu_set_region_dcache_behaviour(IRAM_BASE_ADDR, + IRAM_SIZE, + option); } #endif @@ -339,10 +354,10 @@ const struct boot_mode soc_boot_modes[] = { void s_init(void) { struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; - int is_6q = is_cpu_type(MXC_CPU_MX6Q); + struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; u32 mask480; u32 mask528; - + u32 reg, periph1, periph2; if (is_cpu_type(MXC_CPU_MX6SX)) return; @@ -357,15 +372,23 @@ void s_init(void) ANATOP_PFD_CLKGATE_MASK(1) | ANATOP_PFD_CLKGATE_MASK(2) | ANATOP_PFD_CLKGATE_MASK(3); - mask528 = ANATOP_PFD_CLKGATE_MASK(0) | - ANATOP_PFD_CLKGATE_MASK(1) | + mask528 = ANATOP_PFD_CLKGATE_MASK(1) | ANATOP_PFD_CLKGATE_MASK(3); - /* - * Don't reset PFD2 on DL/S - */ - if (is_6q) + reg = readl(&ccm->cbcmr); + periph2 = ((reg & MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK) + >> MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET); + periph1 = ((reg & MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK) + >> MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET); + + /* Checking if PLL2 PFD0 or PLL2 PFD2 is using for periph clock */ + if ((periph2 != 0x2) && (periph1 != 0x2)) + mask528 |= ANATOP_PFD_CLKGATE_MASK(0); + + if ((periph2 != 0x1) && (periph1 != 0x1) && + (periph2 != 0x3) && (periph1 != 0x3)) mask528 |= ANATOP_PFD_CLKGATE_MASK(2); + writel(mask480, &anatop->pfd_480_set); writel(mask528, &anatop->pfd_528_set); writel(mask480, &anatop->pfd_480_clr); diff --git a/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S index 287f8d74af..879e0e097f 100644 --- a/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S +++ b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S @@ -35,6 +35,13 @@ do_cpu_waiting: */ .align 4 do_lowlevel_init: + ldr r2, =0xFF000044 /* PRR */ + ldr r1, [r2] + and r1, r1, #0x7F00 + lsrs r1, r1, #8 + cmp r1, #0x4C /* 0x4C is ID of r8a7794 */ + beq _exit_init_l2_a15 + /* surpress wfe if ca15 */ tst r4, #4 mrceq p15, 0, r0, c1, c0, 1 /* actlr */ @@ -42,11 +49,6 @@ do_lowlevel_init: mcreq p15, 0, r0, c1, c0, 1 /* and set l2 latency */ - mrceq p15, 1, r0, c9, c0, 2 /* l2ctlr */ - orreq r0, r0, #0x00000800 - orreq r0, r0, #0x00000003 - mcreq p15, 1, r0, c9, c0, 2 - mrc p15, 0, r0, c0, c0, 5 /* r0 = MPIDR */ and r0, r0, #0xf00 lsr r0, r0, #8 @@ -58,7 +60,15 @@ do_lowlevel_init: cmp r1, #3 /* has already been set up */ bicne r0, r0, #0xe7 orrne r0, r0, #0x83 /* L2CTLR[7:6] + L2CTLR[2:0] */ - orrne r0, r0, #0x20 /* L2CTLR[5] */ + + ldr r2, =0xFF000044 /* PRR */ + ldr r1, [r2] + and r1, r1, #0x7F00 + lsrs r1, r1, #8 + cmp r1, #0x45 /* 0x45 is ID of r8a7790 */ + bne L2CTLR_5_SKIP + orrne r0, r0, #0x20 /* L2CTLR[5] */ +L2CTLR_5_SKIP: mcrne p15, 1, r0, c9, c0, 2 _exit_init_l2_a15: diff --git a/arch/arm/cpu/armv7/s5pc1xx/Kconfig b/arch/arm/cpu/armv7/s5pc1xx/Kconfig new file mode 100644 index 0000000000..2fbbc18203 --- /dev/null +++ b/arch/arm/cpu/armv7/s5pc1xx/Kconfig @@ -0,0 +1,25 @@ +if ARCH_S5PC1XX + +choice + prompt "S5PC1XX board select" + +config TARGET_S5P_GONI + bool "S5P Goni board" + select OF_CONTROL if !SPL_BUILD + +config TARGET_SMDKC100 + bool "Support smdkc100 board" + select OF_CONTROL if !SPL_BUILD + +endchoice + +config SYS_CPU + default "armv7" + +config SYS_SOC + default "s5pc1xx" + +source "board/samsung/goni/Kconfig" +source "board/samsung/smdkc100/Kconfig" + +endif diff --git a/arch/arm/cpu/armv7/s5pc1xx/cache.S b/arch/arm/cpu/armv7/s5pc1xx/cache.S deleted file mode 100644 index 3089592eb1..0000000000 --- a/arch/arm/cpu/armv7/s5pc1xx/cache.S +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (C) 2009 Samsung Electronics - * Minkyu Kang <mk7.kang@samsung.com> - * - * based on arch/arm/cpu/armv7/omap3/cache.S - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -.align 5 - -#include <linux/linkage.h> - -#ifndef CONFIG_SYS_L2CACHE_OFF -ENTRY(v7_outer_cache_enable) - push {r0, r1, r2, lr} - mrc 15, 0, r3, cr1, cr0, 1 - orr r3, r3, #2 - mcr 15, 0, r3, cr1, cr0, 1 - pop {r1, r2, r3, pc} -ENDPROC(v7_outer_cache_enable) - -ENTRY(v7_outer_cache_disable) - push {r0, r1, r2, lr} - mrc 15, 0, r3, cr1, cr0, 1 - bic r3, r3, #2 - mcr 15, 0, r3, cr1, cr0, 1 - pop {r1, r2, r3, pc} -ENDPROC(v7_outer_cache_disable) -#endif diff --git a/arch/arm/cpu/armv7/s5pc1xx/cache.c b/arch/arm/cpu/armv7/s5pc1xx/cache.c new file mode 100644 index 0000000000..51af2990c2 --- /dev/null +++ b/arch/arm/cpu/armv7/s5pc1xx/cache.c @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2014 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * Robert Baldyga <r.baldyga@samsung.com> + * + * based on arch/arm/cpu/armv7/omap3/cache.S + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + dcache_enable(); +} + +void disable_caches(void) +{ + dcache_disable(); +} +#endif + +#ifndef CONFIG_SYS_L2CACHE_OFF +void v7_outer_cache_enable(void) +{ + __asm( + "push {r0, r1, r2, lr}\n\t" + "mrc 15, 0, r3, cr1, cr0, 1\n\t" + "orr r3, r3, #2\n\t" + "mcr 15, 0, r3, cr1, cr0, 1\n\t" + "pop {r1, r2, r3, pc}" + ); +} + +void v7_outer_cache_disable(void) +{ + __asm( + "push {r0, r1, r2, lr}\n\t" + "mrc 15, 0, r3, cr1, cr0, 1\n\t" + "bic r3, r3, #2\n\t" + "mcr 15, 0, r3, cr1, cr0, 1\n\t" + "pop {r1, r2, r3, pc}" + ); +} +#endif |