summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/cpu')
-rw-r--r--arch/arm/cpu/armv7/mx6/clock.c42
-rw-r--r--arch/arm/cpu/armv7/mx6/ddr.c10
-rw-r--r--arch/arm/cpu/armv7/mx6/soc.c13
3 files changed, 29 insertions, 36 deletions
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index a850d1a232..ff932aa7ed 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -97,7 +97,7 @@ void enable_enet_clk(unsigned char enable)
{
u32 mask, *addr;
- if (is_cpu_type(MXC_CPU_MX6UL)) {
+ if (is_mx6ul()) {
mask = MXC_CCM_CCGR3_ENET_MASK;
addr = &imx_ccm->CCGR3;
} else {
@@ -117,7 +117,7 @@ void enable_uart_clk(unsigned char enable)
{
u32 mask;
- if (is_cpu_type(MXC_CPU_MX6UL))
+ if (is_mx6ul())
mask = MXC_CCM_CCGR5_UART_MASK;
else
mask = MXC_CCM_CCGR5_UART_MASK | MXC_CCM_CCGR5_UART_SERIAL_MASK;
@@ -168,7 +168,7 @@ int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
reg &= ~mask;
__raw_writel(reg, &imx_ccm->CCGR2);
} else {
- if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) {
+ if (is_mx6sx() || is_mx6ul()) {
mask = MXC_CCM_CCGR6_I2C4_MASK;
addr = &imx_ccm->CCGR6;
} else {
@@ -279,7 +279,7 @@ static u32 mxc_get_pll_pfd(enum pll_clocks pll, int pfd_num)
switch (pll) {
case PLL_BUS:
- if (!is_cpu_type(MXC_CPU_MX6UL)) {
+ if (!is_mx6ul()) {
if (pfd_num == 3) {
/* No PFD3 on PPL2 */
return 0;
@@ -379,8 +379,8 @@ static u32 get_ipg_per_clk(void)
u32 reg, perclk_podf;
reg = __raw_readl(&imx_ccm->cscmr1);
- if (is_cpu_type(MXC_CPU_MX6SL) || is_cpu_type(MXC_CPU_MX6SX) ||
- is_mx6dqp() || is_cpu_type(MXC_CPU_MX6UL)) {
+ if (is_mx6sl() || is_mx6sx() ||
+ is_mx6dqp() || is_mx6ul()) {
if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK)
return MXC_HCLK; /* OSC 24Mhz */
}
@@ -396,8 +396,7 @@ static u32 get_uart_clk(void)
u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */
reg = __raw_readl(&imx_ccm->cscdr1);
- if (is_cpu_type(MXC_CPU_MX6SL) || is_cpu_type(MXC_CPU_MX6SX) ||
- is_mx6dqp() || is_cpu_type(MXC_CPU_MX6UL)) {
+ if (is_mx6sl() || is_mx6sx() || is_mx6dqp() || is_mx6ul()) {
if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
freq = MXC_HCLK;
}
@@ -416,8 +415,7 @@ static u32 get_cspi_clk(void)
cspi_podf = (reg & MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK) >>
MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
- if (is_mx6dqp() || is_cpu_type(MXC_CPU_MX6SL) ||
- is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) {
+ if (is_mx6dqp() || is_mx6sl() || is_mx6sx() || is_mx6ul()) {
if (reg & MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK)
return MXC_HCLK / (cspi_podf + 1);
}
@@ -479,14 +477,13 @@ static u32 get_mmdc_ch0_clk(void)
u32 freq, podf, per2_clk2_podf, pmu_misc2_audio_div;
- if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL) ||
- is_cpu_type(MXC_CPU_MX6SL)) {
+ if (is_mx6sx() || is_mx6ul() || is_mx6sl()) {
podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) >>
MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET;
if (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK_SEL) {
per2_clk2_podf = (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_MASK) >>
MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_OFFSET;
- if (is_cpu_type(MXC_CPU_MX6SL)) {
+ if (is_mx6sl()) {
if (cbcmr & MXC_CCM_CBCMR_PERIPH2_CLK2_SEL)
freq = MXC_HCLK;
else
@@ -618,7 +615,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq)
debug("mxs_set_lcdclk, freq = %dKHz\n", freq);
- if ((!is_cpu_type(MXC_CPU_MX6SX)) && !is_cpu_type(MXC_CPU_MX6UL)) {
+ if (!is_mx6sx() && !is_mx6ul()) {
debug("This chip not support lcd!\n");
return;
}
@@ -630,7 +627,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq)
return;
}
- if (is_cpu_type(MXC_CPU_MX6SX)) {
+ if (is_mx6sx()) {
reg = readl(&imx_ccm->cscdr2);
/* Can't change clocks when clock not from pre-mux */
if ((reg & MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK) != 0)
@@ -711,7 +708,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq)
MXC_CCM_CBCMR_LCDIF1_PODF_MASK,
((postd - 1) <<
MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET));
- } else if (is_cpu_type(MXC_CPU_MX6SX)) {
+ } else if (is_mx6sx()) {
/* Setting LCDIF2 for i.MX6SX */
if (enable_pll_video(pll_div, pll_num, pll_denom, post_div))
return;
@@ -737,7 +734,7 @@ int enable_lcdif_clock(u32 base_addr)
u32 reg = 0;
u32 lcdif_clk_sel_mask, lcdif_ccgr3_mask;
- if (is_cpu_type(MXC_CPU_MX6SX)) {
+ if (is_mx6sx()) {
if ((base_addr != LCDIF1_BASE_ADDR) &&
(base_addr != LCDIF2_BASE_ADDR)) {
puts("Wrong LCD interface!\n");
@@ -752,7 +749,7 @@ int enable_lcdif_clock(u32 base_addr)
MXC_CCM_CCGR3_DISP_AXI_MASK) :
(MXC_CCM_CCGR3_LCDIF1_PIX_MASK |
MXC_CCM_CCGR3_DISP_AXI_MASK);
- } else if (is_cpu_type(MXC_CPU_MX6UL)) {
+ } else if (is_mx6ul()) {
if (base_addr != LCDIF1_BASE_ADDR) {
puts("Wrong LCD interface!\n");
return -EINVAL;
@@ -850,8 +847,7 @@ int enable_fec_anatop_clock(int fec_id, enum enet_freq freq)
reg |= BF_ANADIG_PLL_ENET_DIV_SELECT(freq);
} else if (fec_id == 1) {
/* Only i.MX6SX/UL support ENET2 */
- if (!(is_cpu_type(MXC_CPU_MX6SX) ||
- is_cpu_type(MXC_CPU_MX6UL)))
+ if (!(is_mx6sx() || is_mx6ul()))
return -EINVAL;
reg &= ~BM_ANADIG_PLL_ENET2_DIV_SELECT;
reg |= BF_ANADIG_PLL_ENET2_DIV_SELECT(freq);
@@ -1044,7 +1040,7 @@ int enable_pcie_clock(void)
#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF 0xa
#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF 0xb
- if (is_cpu_type(MXC_CPU_MX6SX))
+ if (is_mx6sx())
lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF;
else
lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF;
@@ -1228,7 +1224,7 @@ static void disable_ldb_di_clock_sources(void)
/* Make sure PFDs are disabled at boot. */
reg = readl(&mxc_ccm->analog_pfd_528);
/* Cannot disable pll2_pfd2_396M, as it is the MMDC clock in iMX6DL */
- if (is_cpu_type(MXC_CPU_MX6DL) || is_cpu_type(MXC_CPU_MX6SOLO))
+ if (is_mx6sdl())
reg |= 0x80008080;
else
reg |= 0x80808080;
@@ -1251,7 +1247,7 @@ static void enable_ldb_di_clock_sources(void)
int reg;
reg = readl(&mxc_ccm->analog_pfd_528);
- if (is_cpu_type(MXC_CPU_MX6DL) || is_cpu_type(MXC_CPU_MX6SOLO))
+ if (is_mx6sdl())
reg &= ~(0x80008080);
else
reg &= ~(0x80808080);
diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c
index 1e7ae28933..3cc866616a 100644
--- a/arch/arm/cpu/armv7/mx6/ddr.c
+++ b/arch/arm/cpu/armv7/mx6/ddr.c
@@ -888,8 +888,7 @@ void mx6sdl_dram_iocfg(unsigned width,
#define MR(val, ba, cmd, cs1) \
((val << 16) | (1 << 15) | (cmd << 4) | (cs1 << 3) | ba)
#define MMDC1(entry, value) do { \
- if (!is_cpu_type(MXC_CPU_MX6SX) && !is_cpu_type(MXC_CPU_MX6UL) && \
- !is_cpu_type(MXC_CPU_MX6SL)) \
+ if (!is_mx6sx() && !is_mx6ul() && !is_mx6sl()) \
mmdc1->entry = value; \
} while (0)
@@ -1197,12 +1196,11 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo,
u16 mem_speed = ddr3_cfg->mem_speed;
mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
- if (!is_cpu_type(MXC_CPU_MX6SX) && !is_cpu_type(MXC_CPU_MX6UL) &&
- !is_cpu_type(MXC_CPU_MX6SL))
+ if (!is_mx6sx() && !is_mx6ul() && !is_mx6sl())
mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
/* Limit mem_speed for MX6D/MX6Q */
- if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) {
+ if (is_mx6dq()) {
if (mem_speed > 1066)
mem_speed = 1066; /* 1066 MT/s */
@@ -1221,7 +1219,7 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo,
* Data rate of 1066 MT/s requires 533 MHz DDR3 clock, but MX6D/Q supports
* up to 528 MHz, so reduce the clock to fit chip specs
*/
- if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) {
+ if (is_mx6dq()) {
if (clock > 528)
clock = 528; /* 528 MHz */
}
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index aaa1adb446..407f3160fd 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -126,7 +126,7 @@ u32 get_cpu_speed_grade_hz(void)
val >>= OCOTP_CFG3_SPEED_SHIFT;
val &= 0x3;
- if (is_cpu_type(MXC_CPU_MX6UL)) {
+ if (is_mx6ul()) {
if (val == OCOTP_CFG3_SPEED_528MHZ)
return 528000000;
else if (val == OCOTP_CFG3_SPEED_696MHZ)
@@ -138,14 +138,14 @@ u32 get_cpu_speed_grade_hz(void)
switch (val) {
/* Valid for IMX6DQ */
case OCOTP_CFG3_SPEED_1P2GHZ:
- if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
+ if (is_mx6dq())
return 1200000000;
/* Valid for IMX6SX/IMX6SDL/IMX6DQ */
case OCOTP_CFG3_SPEED_1GHZ:
return 996000000;
/* Valid for IMX6DQ */
case OCOTP_CFG3_SPEED_850MHZ:
- if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
+ if (is_mx6dq())
return 852000000;
/* Valid for IMX6SX/IMX6SDL/IMX6DQ */
case OCOTP_CFG3_SPEED_800MHZ:
@@ -293,7 +293,7 @@ static void clear_mmdc_ch_mask(void)
reg = readl(&mxc_ccm->ccdr);
/* Clear MMDC channel mask */
- if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL) || is_cpu_type(MXC_CPU_MX6SL))
+ if (is_mx6sx() || is_mx6ul() || is_mx6sl())
reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK);
else
reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK);
@@ -459,8 +459,7 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
struct fuse_bank4_regs *fuse =
(struct fuse_bank4_regs *)bank->fuse_regs;
- if ((is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) &&
- dev_id == 1) {
+ if ((is_mx6sx() || is_mx6ul()) && dev_id == 1) {
u32 value = readl(&fuse->mac_addr2);
mac[0] = value >> 24 ;
mac[1] = value >> 16 ;
@@ -524,7 +523,7 @@ void s_init(void)
u32 mask528;
u32 reg, periph1, periph2;
- if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL))
+ if (is_mx6sx() || is_mx6ul())
return;
/* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs
generated by cgit (git 2.34.1) at 2024-12-28 05:37:34 +0000