summaryrefslogtreecommitdiff
path: root/arch/arm/dts/armada-8040-mcbin.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/dts/armada-8040-mcbin.dts')
-rw-r--r--arch/arm/dts/armada-8040-mcbin.dts293
1 files changed, 293 insertions, 0 deletions
diff --git a/arch/arm/dts/armada-8040-mcbin.dts b/arch/arm/dts/armada-8040-mcbin.dts
new file mode 100644
index 0000000000..e42b092b25
--- /dev/null
+++ b/arch/arm/dts/armada-8040-mcbin.dts
@@ -0,0 +1,293 @@
+/*
+ * Copyright (C) 2016 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ * https://spdx.org/licenses
+ */
+
+#include "armada-8040.dtsi" /* include SoC device tree */
+
+/ {
+ model = "MACCHIATOBin-8040";
+ compatible = "marvell,armada8040-mcbin",
+ "marvell,armada8040";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ i2c0 = &cpm_i2c0;
+ i2c1 = &cpm_i2c1;
+ spi0 = &cps_spi1;
+ gpio0 = &ap_gpio0;
+ gpio1 = &cpm_gpio0;
+ gpio2 = &cpm_gpio1;
+ };
+
+ memory@00000000 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ simple-bus {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usb3h0_vbus: usb3-vbus0 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_xhci_vbus_pins>;
+ regulator-name = "reg-usb3h0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <500000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&cpm_gpio1 15 GPIO_ACTIVE_HIGH>; /* GPIO[47] */
+ };
+ };
+};
+
+/* Accessible over the mini-USB CON9 connector on the main board */
+&uart0 {
+ status = "okay";
+};
+
+&ap_pinctl {
+ /*
+ * MPP Bus:
+ * eMMC [0-10]
+ * UART0 [11,19]
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 1 1 1 1 1 1 1 1 1 1
+ 1 3 0 0 0 0 0 0 0 3 >;
+};
+
+/* on-board eMMC */
+&ap_sdhci0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ap_emmc_pins>;
+ bus-width= <8>;
+ status = "okay";
+};
+
+&cpm_pinctl {
+ /*
+ * MPP Bus:
+ * [0-31] = 0xff: Keep default CP0_shared_pins:
+ * [11] CLKOUT_MPP_11 (out)
+ * [23] LINK_RD_IN_CP2CP (in)
+ * [25] CLKOUT_MPP_25 (out)
+ * [29] AVS_FB_IN_CP2CP (in)
+ * [32,34] SMI
+ * [33] MSS power down
+ * [35-38] CP0 I2C1 and I2C0
+ * [39] MSS CKE Enable
+ * [40,41] CP0 UART1 TX/RX
+ * [42,43] XSMI (controls two 10G phys)
+ * [47] USB VBUS EN
+ * [48] FAN PWM
+ * [49] 10G port 1 interrupt
+ * [50] 10G port 0 interrupt
+ * [51] 2.5G SFP TX fault
+ * [52] PCIe reset out
+ * [53] 2.5G SFP mode
+ * [54] 2.5G SFP LOS
+ * [55] Micro SD card detect
+ * [56-61] Micro SD
+ * [62] CP1 KR SFP FAULT
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0 7 0xa 7 2 2 2 2 0xa
+ 7 7 8 8 0 0 0 0 0 0
+ 0 0 0 0 0 0 0xe 0xe 0xe 0xe
+ 0xe 0xe 0 >;
+
+ cpm_xhci_vbus_pins: cpm-xhci-vbus-pins {
+ marvell,pins = < 47 >;
+ marvell,function = <0>;
+ };
+
+ cpm_pcie_reset_pins: cpm-pcie-reset-pins {
+ marvell,pins = < 52 >;
+ marvell,function = <0>;
+ };
+};
+
+/* uSD slot */
+&cpm_sdhci0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_sdhci_pins>;
+ bus-width= <4>;
+ status = "okay";
+};
+
+/* PCIe x4 */
+&cpm_pcie0 {
+ num-lanes = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_pcie_reset_pins>;
+ marvell,reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_HIGH>; /* GPIO[52] */
+ status = "okay";
+};
+
+&cpm_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_i2c0_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&cpm_i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_i2c1_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&cpm_sata0 {
+ status = "okay";
+};
+
+&cpm_comphy {
+ /*
+ * CP0 Serdes Configuration:
+ * Lane 0: PCIe0 (x4)
+ * Lane 1: PCIe0 (x4)
+ * Lane 2: PCIe0 (x4)
+ * Lane 3: PCIe0 (x4)
+ * Lane 4: KR (10G)
+ * Lane 5: SATA1
+ */
+ phy0 {
+ phy-type = <PHY_TYPE_PEX0>;
+ };
+ phy1 {
+ phy-type = <PHY_TYPE_PEX0>;
+ };
+ phy2 {
+ phy-type = <PHY_TYPE_PEX0>;
+ };
+ phy3 {
+ phy-type = <PHY_TYPE_PEX0>;
+ };
+ phy4 {
+ phy-type = <PHY_TYPE_KR>;
+ };
+ phy5 {
+ phy-type = <PHY_TYPE_SATA1>;
+ };
+};
+
+&cps_sata0 {
+ status = "okay";
+};
+
+&cps_usb3_0 {
+ vbus-supply = <&reg_usb3h0_vbus>;
+ status = "okay";
+};
+
+&cps_utmi0 {
+ status = "okay";
+};
+
+&cps_pinctl {
+ /*
+ * MPP Bus:
+ * [0-5] TDM
+ * [6,7] CP1_UART 0
+ * [8] CP1 10G SFP LOS
+ * [9] CP1 10G PHY RESET
+ * [10] CP1 10G SFP TX Disable
+ * [11] CP1 10G SFP Mode
+ * [12] SPI1 CS1n
+ * [13] SPI1 MISO (TDM and SPI ROM shared)
+ * [14] SPI1 CS0n
+ * [15] SPI1 MOSI (TDM and SPI ROM shared)
+ * [16] SPI1 CLK (TDM and SPI ROM shared)
+ * [24] CP1 2.5G SFP TX Disable
+ * [26] CP0 10G SFP TX Fault
+ * [27] CP0 10G SFP Mode
+ * [28] CP0 10G SFP LOS
+ * [29] CP0 10G SFP TX Disable
+ * [30] USB Over current indication
+ * [31] 10G Port 0 phy reset
+ * [32-62] = 0xff: Keep default CP1_shared_pins:
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 0x4 0x4 0x4 0x4 0x4 0x4 0x8 0x8 0x0 0x0
+ 0x0 0x0 0x3 0x3 0x3 0x3 0x3 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0x0 0xff 0x0 0x0 0x0 0x0
+ 0x0 0x0 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff>;
+};
+
+&cps_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cps_spi1_pins>;
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x200000>;
+ };
+ partition@400000 {
+ label = "Filesystem";
+ reg = <0x200000 0xce0000>;
+ };
+ };
+ };
+};
+
+&cps_comphy {
+ /*
+ * CP1 Serdes Configuration:
+ * Lane 0: SGMII2
+ * Lane 1: SATA 0
+ * Lane 2: USB HOST 0
+ * Lane 3: SATA1
+ * Lane 4: KR (10G)
+ * Lane 5: SGMII3
+ */
+ phy0 {
+ phy-type = <PHY_TYPE_SGMII2>;
+ phy-speed = <PHY_SPEED_1_25G>;
+ };
+ phy1 {
+ phy-type = <PHY_TYPE_SATA0>;
+ };
+ phy2 {
+ phy-type = <PHY_TYPE_USB3_HOST0>;
+ };
+ phy3 {
+ phy-type = <PHY_TYPE_SATA1>;
+ };
+ phy4 {
+ phy-type = <PHY_TYPE_KR>;
+ };
+ phy5 {
+ phy-type = <PHY_TYPE_SGMII3>;
+ };
+};
generated by cgit (git 2.34.1) at 2024-12-28 15:29:39 +0000