summaryrefslogtreecommitdiff
path: root/arch/arm/dts/at91sam9rlek.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/dts/at91sam9rlek.dts')
-rw-r--r--arch/arm/dts/at91sam9rlek.dts239
1 files changed, 239 insertions, 0 deletions
diff --git a/arch/arm/dts/at91sam9rlek.dts b/arch/arm/dts/at91sam9rlek.dts
new file mode 100644
index 0000000000..ae42697445
--- /dev/null
+++ b/arch/arm/dts/at91sam9rlek.dts
@@ -0,0 +1,239 @@
+/*
+ * at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board
+ *
+ * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+#include "at91sam9rl.dtsi"
+
+/ {
+ model = "Atmel at91sam9rlek";
+ compatible = "atmel,at91sam9rlek", "atmel,at91sam9rl", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw";
+ stdout-path = "serial0:115200n8";
+ u-boot,dm-pre-reloc;
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ fb0: fb@00500000 {
+ display = <&display0>;
+ status = "okay";
+
+ display0: display {
+ bits-per-pixel = <16>;
+ atmel,lcdcon-backlight;
+ atmel,dmacon = <0x1>;
+ atmel,lcdcon2 = <0x80008002>;
+ atmel,guard-time = <1>;
+ atmel,lcd-wiring-mode = "RGB";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <4965000>;
+ hactive = <240>;
+ vactive = <320>;
+ hback-porch = <1>;
+ hfront-porch = <33>;
+ vback-porch = <1>;
+ vfront-porch = <0>;
+ hsync-len = <5>;
+ vsync-len = <1>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt = <1>;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader@40000 {
+ label = "bootloader";
+ reg = <0x40000 0x80000>;
+ };
+
+ bootloaderenv@c0000 {
+ label = "bootloader env";
+ reg = <0xc0000 0xc0000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
+ };
+ };
+
+ apb {
+ mmc0: mmc@fffa4000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0
+ &pinctrl_mmc0_clk
+ &pinctrl_mmc0_slot0_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ usart0: serial@fffb0000 {
+ pinctrl-0 = <
+ &pinctrl_usart0
+ &pinctrl_usart0_rts
+ &pinctrl_usart0_cts>;
+ status = "okay";
+ };
+
+ adc0: adc@fffd0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad1
+ &pinctrl_adc0_ad2
+ &pinctrl_adc0_ad3
+ &pinctrl_adc0_ad4
+ &pinctrl_adc0_ad5
+ &pinctrl_adc0_adtrg>;
+ atmel,adc-ts-wires = <4>;
+ status = "okay";
+ };
+
+ usb0: gadget@fffd4000 {
+ atmel,vbus-gpio = <&pioA 8 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ spi0: spi@fffcc000 {
+ status = "okay";
+ cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
+ mtd_dataflash@0 {
+ compatible = "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <15000000>;
+ reg = <0>;
+ };
+ };
+
+ pwm0: pwm@fffc8000 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_pwm1_2>,
+ <&pinctrl_pwm0_pwm2_2>;
+ };
+
+ dbgu: serial@fffff200 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+ };
+
+ pinctrl@fffff400 {
+ mmc0 {
+ pinctrl_board_mmc0: mmc0-board {
+ atmel,pins =
+ <AT91_PIOA 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ };
+ };
+
+ watchdog@fffffd40 {
+ status = "okay";
+ };
+
+ rtc@fffffe00 {
+ status = "okay";
+ };
+ };
+ };
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ ds1 {
+ label = "ds1";
+ pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
+ max-brightness = <255>;
+ };
+
+ ds2 {
+ label = "ds2";
+ pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>;
+ max-brightness = <255>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ ds3 {
+ label = "ds3";
+ gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ right_click {
+ label = "right_click";
+ gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
+ linux,code = <273>;
+ wakeup-source;
+ };
+
+ left_click {
+ label = "left_click";
+ gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
+ linux,code = <272>;
+ wakeup-source;
+ };
+ };
+
+ i2c-gpio-0 {
+ status = "okay";
+ };
+
+ i2c-gpio-1 {
+ status = "okay";
+ };
+};