diff options
Diffstat (limited to 'arch/arm/dts/rk3399-puma.dtsi')
| -rw-r--r-- | arch/arm/dts/rk3399-puma.dtsi | 567 |
1 files changed, 232 insertions, 335 deletions
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi index 246a892cb7..07694b196f 100644 --- a/arch/arm/dts/rk3399-puma.dtsi +++ b/arch/arm/dts/rk3399-puma.dtsi @@ -1,30 +1,74 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH */ #include <dt-bindings/pwm/pwm.h> #include "rk3399.dtsi" +#include "rk3399-opp.dtsi" / { - model = "Theobroma Systems RK3399-Q7 SoM"; - compatible = "tsd,rk3399-q7", "tsd,puma", "rockchip,rk3399"; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&leds_pins_puma>; + pinctrl-0 = <&led_pin_module>; - module_led { + module-led { label = "module_led"; gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; + panic-indicator; }; + }; - sd_card_led { - label = "sd_card_led"; - gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; + /* + * Overwrite the opp-table for CPUB as this board uses a different + * regulator (FAN53555) that only allows 10mV steps and therefore + * can't reach the operation point target voltages from rk3399-opp.dtsi + */ + /delete-node/ opp-table1; + cluster1_opp: opp-table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <800000>; + clock-latency-ns = <40000>; + }; + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <800000>; + }; + opp02 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <830000>; + opp-suspend; + }; + opp03 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <880000>; + }; + opp04 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <950000>; + }; + opp05 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1030000>; + }; + opp06 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <1100000>; + }; + opp07 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1200000>; + }; + opp08 { + opp-hz = /bits/ 64 <1992000000>; + opp-microvolt = <1230000>; + turbo-mode; }; }; @@ -35,78 +79,14 @@ #clock-cells = <0>; }; - dw_hdmi_audio: dw-hdmi-audio { - status = "enabled"; - compatible = "rockchip,dw-hdmi-audio"; - #sound-dai-cells = <0>; - }; - - hdmi_codec: hdmi-codec { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,name = "HDMI-CODEC"; - - simple-audio-card,cpu { - sound-dai = <&i2s2>; - }; - - simple-audio-card,codec { - sound-dai = <&hdmi>; - }; - }; - - hdmi_sound: hdmi-sound { - status = "disabled"; - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,name = "rockchip,hdmi"; - - simple-audio-card,cpu { - sound-dai = <&i2s2>; - }; - simple-audio-card,codec { - sound-dai = <&hdmi>; - }; - }; - - usbhub_enable: usbhub_enable { + vcc1v2_phy: vcc1v2-phy { compatible = "regulator-fixed"; - regulator-name = "usbhub_enable"; - enable-active-low; - gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - /* - * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module - * eMMC and SPI flash powered-down initially (in fact it keeps the - * reset signal asserted). Even though it is an enable signal, we - * model this as a regulator. - */ - bios_enable: bios_enable { - compatible = "regulator-fixed"; - regulator-name = "bios_enable"; - enable-active-high; - gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; + regulator-name = "vcc1v2_phy"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vccadc_ref: vccadc-ref { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vcc5v0_sys>; }; vcc3v3_sys: vcc3v3-sys { @@ -116,16 +96,18 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; }; - vcc5v0_otg: vcc5v0-otg-regulator { + vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; + enable-active-low; pinctrl-names = "default"; - pinctrl-0 = <&otg_vbus_drv>; - regulator-name = "vcc5v0_otg"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; regulator-always-on; + vin-supply = <&vcc5v0_sys>; }; vcc5v0_sys: vcc5v0-sys { @@ -136,48 +118,55 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; +}; - vcc_phy: vcc-phy-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_phy"; - regulator-always-on; - regulator-boot-on; - }; +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - regulator-name = "vdd_log"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - regulator-init-microvolt = <950000>; - }; +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; }; &emmc_phy { status = "okay"; + drive-impedance-ohm = <33>; }; &gmac { - phy-supply = <&vcc_phy>; - phy-mode = "rgmii"; - clock_in_out = "input"; - snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <2 10000 50000>; assigned-clocks = <&cru SCLK_RMII_SRC>; assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc1v2_phy>; + phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; tx_delay = <0x10>; rx_delay = <0x10>; status = "okay"; }; -&hdmi { - #sound-dai-cells = <0>; +&gpu { + mali-supply = <&vdd_gpu>; status = "okay"; }; @@ -187,37 +176,17 @@ i2c-scl-falling-time-ns = <4>; clock-frequency = <400000>; - vdd_gpu: vdd_gpu { - status = "okay"; - compatible = "fcs,fan53555"; - reg = <0x60>; - vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; - vin-supply = <&vcc5v0_sys>; - regulator-compatible = "fan53555-reg"; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1230000>; - regulator-ramp-delay = <1000>; - fcs,suspend-voltage-selector = <1>; - regulator-always-on; - regulator-boot-on; - regulator-initial-state = <3>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - rk808: pmic@1b { compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio1>; - interrupts = <22 IRQ_TYPE_LEVEL_LOW>; // TODO check interrupt? + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; rockchip,system-power-controller; wakeup-source; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; vcc1-supply = <&vcc5v0_sys>; vcc2-supply = <&vcc5v0_sys>; @@ -234,44 +203,44 @@ regulators { vdd_center: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vdd_center"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; - regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_cpu_l: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vdd_cpu_l"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; - regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; regulator-always-on; regulator-boot-on; - regulator-name = "vcc_ddr"; regulator-state-mem { regulator-on-in-suspend; }; }; vcc_1v8: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; @@ -279,32 +248,32 @@ }; vcc_ldo1: LDO_REG1 { - regulator-boot-on; + regulator-name = "vcc_ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc_ldo1"; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc1v8_hdmi: LDO_REG2 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc1v8_hdmi"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc1v8_hdmi"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc1v8_pmu: LDO_REG3 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc1v8_pmu"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc1v8_pmu"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; @@ -312,11 +281,11 @@ }; vcc_sd: LDO_REG4 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc_sd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; - regulator-name = "vcc_sd"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3000000>; @@ -324,79 +293,105 @@ }; vcc_ldo5: LDO_REG5 { - regulator-boot-on; + regulator-name = "vcc_ldo5"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - regulator-name = "vcc_ldo5"; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_ldo6: LDO_REG6 { - regulator-boot-on; + regulator-name = "vcc_ldo6"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; - regulator-name = "vcc_ldo6"; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc0v9_hdmi: LDO_REG7 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc0v9_hdmi"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; - regulator-name = "vcc0v9_hdmi"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_efuse: LDO_REG8 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc_efuse"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc_efuse"; + regulator-always-on; + regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; regulator-always-on; regulator-boot-on; - regulator-name = "vcc3v3_s3"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; regulator-always-on; regulator-boot-on; - regulator-name = "vcc3v3_s0"; regulator-state-mem { regulator-off-in-suspend; }; }; }; }; + + vdd_gpu: regulator@60 { + compatible = "fcs,fan53555"; + reg = <0x60>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1230000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&i2c7 { + status = "okay"; + clock-frequency = <400000>; + + fan: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #cooling-cells = <2>; + }; + + rtc_twi: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; }; &i2c8 { status = "okay"; clock-frequency = <400000>; - vdd_cpu_b: vdd_cpu_b { - status = "okay"; + vdd_cpu_b: regulator@60 { compatible = "fcs,fan53555"; reg = <0x60>; - vsel-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; vin-supply = <&vcc5v0_sys>; - regulator-compatible = "fan53555-reg"; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <1230000>; @@ -404,48 +399,36 @@ fcs,suspend-voltage-selector = <1>; regulator-always-on; regulator-boot-on; - regulator-initial-state = <3>; - regulator-state-mem { - regulator-off-in-suspend; - }; }; }; &i2s0 { + pinctrl-0 = <&i2s0_2ch_bus>; + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; status = "okay"; - rockchip,i2s-broken-burst-len; - rockchip,playback-channels = <8>; - rockchip,capture-channels = <8>; - #sound-dai-cells = <0>; }; -&i2s2 { - #sound-dai-cells = <0>; - status = "okay"; +/* + * As Q7 does not specify neither a global nor a RX clock for I2S these + * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO. + * Therefore we have to redefine the i2s0_2ch_bus definition to prevent + * conflicts. + */ +&i2s0_2ch_bus { + rockchip,pins = + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>; }; &io_domains { status = "okay"; - - bt656-supply = <&vcc_1v8>; /* bt656_gpio2ab_ms */ - audio-supply = <&vcc_1v8>; /* audio_gpio3d4a_ms */ - sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */ - gpio1830-supply = <&vcc_1v8>; /* gpio1833_gpio4cd_ms */ -}; - -&pcie0 { - assigned-clocks = <&cru SCLK_PCIEPHY_REF>; - assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; - assigned-clock-rates = <100000000>; - ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqn>; - status = "okay"; -}; - -&pcie_phy { - status = "okay"; + bt656-supply = <&vcc_1v8>; + audio-supply = <&vcc_1v8>; + sdmmc-supply = <&vcc_sd>; + gpio1830-supply = <&vcc_1v8>; }; &pmu_io_domains { @@ -453,185 +436,99 @@ pmu1830-supply = <&vcc_1v8>; }; -&pwm0 { - status = "okay"; -}; - &pwm2 { status = "okay"; }; -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - supports-emmc; - non-removable; - keep-power-in-suspend; - mmc-hs400-enhanced-strobe; - status = "okay"; -}; - -&sdmmc { - clock-frequency = <150000000>; - max-frequency = <40000000>; - supports-sd; - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - disable-wp; - num-slots = <1>; - vqmmc-supply = <&vcc_sd>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "disabled"; -}; - -&usb_host0_ohci { - status = "disabled"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usb_host1_ehci { - status = "disabled"; -}; - -&usb_host1_ohci { - status = "disabled"; -}; - -&usbdrd3_1 { - status = "okay"; - tsd,usb-port-power = "usbhub_enable"; -}; - -&vopb { - status = "okay"; -}; - &pinctrl { - /* Pins that are not explicitely used by any devices */ - pinctrl-names = "default"; - pinctrl-0 = <&puma_pin_hog>; - - hog { - puma_pin_hog: puma_pin_hog { + i2c8 { + i2c8_xfer_a: i2c8-xfer { rockchip,pins = - /* We need pull-ups on Q7 buttons */ - <RK_GPIO0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, /* LID_BTN# */ - <RK_GPIO0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, /* BATLOW# */ - <RK_GPIO0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, /* SLP_BTN# */ - <RK_GPIO0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; /* BIOS_DISABLE# */ + <1 RK_PC4 1 &pcfg_pull_up>, + <1 RK_PC5 1 &pcfg_pull_up>; }; }; - pmic { - pmic_int_l: pmic-int-l { + leds { + led_pin_module: led-module-gpio { rockchip,pins = - <RK_GPIO1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; + <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; - leds_pins_puma: led_pins@0 { - rockchip,pins = - <RK_GPIO2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>, - <RK_GPIO1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - usb2 { - otg_vbus_drv: otg-vbus-drv { - rockchip,pins = - <RK_GPIO0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - host_vbus_drv: host-vbus-drv { + pmic { + pmic_int_l: pmic-int-l { rockchip,pins = - <RK_GPIO4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; - i2c8 { - i2c8_xfer_a: i2c8-xfer { + usb2 { + vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = - <RK_GPIO1 RK_PC5 RK_FUNC_1 &pcfg_pull_up>, - <RK_GPIO1 RK_PC4 RK_FUNC_1 &pcfg_pull_up>; + <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; -&i2c1 { +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; status = "okay"; - clock-frequency = <400000>; }; -&i2c2 { - status = "okay"; - clock-frequency = <400000>; + +&sdmmc { + vqmmc-supply = <&vcc_sd>; }; -&i2c4 { + +&spi1 { status = "okay"; - clock-frequency = <400000>; + + norflash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; }; -&i2c6 { + +&tcphy1 { status = "okay"; - clock-frequency = <400000>; }; -&i2c6_xfer { - /* Enable pull-ups, the pins would float otherwise. */ - rockchip,pins = - <RK_GPIO2 RK_PB2 RK_FUNC_2 &pcfg_pull_up>, - <RK_GPIO2 RK_PB1 RK_FUNC_2 &pcfg_pull_up>; +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; }; -&i2c7 { +&u2phy1 { status = "okay"; - clock-frequency = <400000>; - rtc_twi: rtc@6f { - compatible = "isil,isl1208"; - reg = <0x6f>; + u2phy1_otg: otg-port { + status = "okay"; }; - fan: fan@18 { - compatible = "ti,amc6821"; - reg = <0x18>; - cooling-min-state = <0>; - cooling-max-state = <9>; - #cooling-cells = <2>; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; }; }; -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts>; +&usbdrd3_1 { status = "okay"; }; - -&spi1 { +&usbdrd_dwc3_1 { status = "okay"; + dr_mode = "host"; +}; - #address-cells = <1>; - #size-cells = <0>; - - spiflash: w25q32dw@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <49500000>; - spi-cpol; - spi-cpha; - }; +&usb_host1_ehci { + status = "okay"; }; -&spi5 { +&usb_host1_ohci { status = "okay"; }; |