1 files changed, 45 insertions, 34 deletions

diff --git a/arch/arm/dts/stm32h743i-eval.dts b/arch/arm/dts/stm32h743i-eval.dts
index 28c876be27..3f8e0c4a99 100644
--- a/arch/arm/dts/stm32h743i-eval.dts
+++ b/arch/arm/dts/stm32h743i-eval.dts
@@ -43,7 +43,6 @@
 /dts-v1/;
 #include "stm32h743.dtsi"
 #include "stm32h743-pinctrl.dtsi"
-#include <dt-bindings/memory/stm32-sdram.h>
 
 / {
 	model = "STMicroelectronics STM32H743i-EVAL board";
@@ -60,50 +59,62 @@
 
 	aliases {
 		serial0 = &usart1;
-		gpio0 = &gpioa;
-		gpio1 = &gpiob;
-		gpio2 = &gpioc;
-		gpio3 = &gpiod;
-		gpio4 = &gpioe;
-		gpio5 = &gpiof;
-		gpio6 = &gpiog;
-		gpio7 = &gpioh;
-		gpio8 = &gpioi;
-		gpio9 = &gpioj;
-		gpio10 = &gpiok;
 	};
+
+	vdda: regulator-vdda {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	usbotg_hs_phy: usb-phy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc USB1ULPI_CK>;
+		clock-names = "main_clk";
+	};
+
 };
 
-&usart1 {
-	pinctrl-0 = <&usart1_pins>;
-	pinctrl-names = "default";
+&adc_12 {
+	vref-supply = <&vdda>;
 	status = "okay";
+	adc1: adc@0 {
+		/* potentiometer */
+		st,adc-channels = <0>;
+		status = "okay";
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
 };
 
-&fmc {
-	pinctrl-0 = <&fmc_pins>;
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins_a>;
 	pinctrl-names = "default";
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
 	status = "okay";
+};
 
-	/*
-	 * Memory configuration from sdram datasheet IS42S32800G-6BLI
-	 * firsct bank is bank@0
-	 * second bank is bank@1
-	 */
-	bank2: bank@1 {
-		st,sdram-control = /bits/ 8 <NO_COL_9 NO_ROW_12 MWIDTH_32 BANKS_4
-				  CAS_2 SDCLK_3 RD_BURST_EN RD_PIPE_DL_0>;
-		st,sdram-timing = /bits/ 8 <TMRD_1 TXSR_1 TRAS_1 TRC_6 TRP_2
-				  TWR_1 TRCD_1>;
-		st,sdram-refcount = <1539>;
-	};
+&rtc {
+	status = "okay";
 };
 
-&sdmmc1 {
+&usart1 {
+	pinctrl-0 = <&usart1_pins>;
+	pinctrl-names = "default";
 	status = "okay";
-	pinctrl-0 = <&sdmmc1_pins>,
-		    <&pinctrl_sdmmc1_level_shifter>;
+};
+
+&usbotg_hs {
+	pinctrl-0 = <&usbotg_hs_pins_a>;
 	pinctrl-names = "default";
-	bus-width = <4>;
-	st,dirpol;
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	dr_mode = "otg";
+	status = "okay";
 };