diff options
Diffstat (limited to 'arch/arm/dts/sun7i-a20-bananapi.dts')
| -rw-r--r-- | arch/arm/dts/sun7i-a20-bananapi.dts | 106 |
1 files changed, 87 insertions, 19 deletions
diff --git a/arch/arm/dts/sun7i-a20-bananapi.dts b/arch/arm/dts/sun7i-a20-bananapi.dts index 67c8a7644b..70dfc4ac0b 100644 --- a/arch/arm/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/dts/sun7i-a20-bananapi.dts @@ -48,7 +48,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "LeMaker Banana Pi"; @@ -64,6 +63,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -110,6 +120,10 @@ >; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -131,6 +145,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -160,8 +184,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ - cd-inverted; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ status = "okay"; }; @@ -178,32 +201,77 @@ }; &pio { + gpio-line-names = + /* PA */ + "ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3", + "ETXD2", "ETXD1", "ETXD0", + "ERXCK", "ERXERR", "ERXDV", "EMDC", "EMDIO", + "ETXEN", "ETXCK", "ECRS", + "ECOL", "ETXERR", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PB */ + "PMU-SCK", "PMU-SDA", "", "", "", "", "", "", + "", "USB0-DRV", "", "", "", "", "", "", + "", "", "", "", "SCL", "SDA", "", "", + "", "", "", "", "", "", "", "", + /* PC */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PD */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PE */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PF */ + "SD0-D1", "SD0-D0", "SD0-CLK", "SD0-CMD", "SD0-D3", + "SD0-D2", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PG */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* PH */ + "TXD0", "RXD0", "IO-1", "PH3", "USB0-IDDET", "PH5", "", "", + "", "", "SD0-DET", "", "", "", "", "", + "", "", "", "", "IO-4", "IO-5", "", "EMAC-PWR-EN", + "LED1", "", "", "", "", "", "", "", + /* PI */ + "", "", "", "IO-GCLK", "", "", "", "", + "", "", "SPI-CE0", "SPI-CLK", "SPI-MOSI", + "SPI-MISO", "SPI-CE1", "", + "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "", + "", "", "", "", "", "", "", ""; + usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; gmac_power_pin_bananapi: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH23"; + function = "gpio_out"; }; led_pins_bananapi: led_pins@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24"; + function = "gpio_out"; }; }; |