diff options
Diffstat (limited to 'arch/arm/dts/sun8i-h3-mapleboard-mp130.dts')
| -rw-r--r-- | arch/arm/dts/sun8i-h3-mapleboard-mp130.dts | 152 |
1 files changed, 152 insertions, 0 deletions
diff --git a/arch/arm/dts/sun8i-h3-mapleboard-mp130.dts b/arch/arm/dts/sun8i-h3-mapleboard-mp130.dts new file mode 100644 index 0000000000..ff0a7a952e --- /dev/null +++ b/arch/arm/dts/sun8i-h3-mapleboard-mp130.dts @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 Centrum Embedded Systems, Jia-Bin Huang <jb@ces.com.tw> + * Copyright (C) 2018 Jonathan McDowell <noodles@earth.li> + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "MapleBoard MP130"; + compatible = "mapleboard,mp130", "allwinner,sun8i-h3"; + + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr_led { + label = "mp130:orange:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status_led { + label = "mp130:orange:status"; + gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + + power { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */ + }; + + user { + label = "user"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "LINEIN", "Line In"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&r_ir_rx_pin>; + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pa_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "disabled"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + /* USB VBUS is always on */ + status = "okay"; +}; |