1 files changed, 0 insertions, 235 deletions
diff --git a/arch/arm/dts/zynqmp-ep108.dts b/arch/arm/dts/zynqmp-ep108.dts
deleted file mode 100644
index a16ffdc3f0..0000000000
--- a/arch/arm/dts/zynqmp-ep108.dts
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * dts file for Xilinx ZynqMP ep108 development board
- *
- * (C) Copyright 2014 - 2015, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xilinx.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/dts-v1/;
-
-#include "zynqmp.dtsi"
-#include "zynqmp-ep108-clk.dtsi"
-
-/ {
-	model = "ZynqMP EP108";
-
-	aliases {
-		ethernet0 = &gem0;
-		mmc0 = &sdhci0;
-		mmc1 = &sdhci1;
-		serial0 = &uart0;
-		spi0 = &qspi;
-		spi1 = &spi0;
-		spi2 = &spi1;
-		usb0 = &usb0;
-		usb1 = &usb1;
-	};
-
-	chosen {
-		bootargs = "earlycon";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x40000000>;
-	};
-};
-
-&can0 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&gem0 {
-	status = "okay";
-	phy-handle = <&phy0>;
-	phy-mode = "rgmii-id";
-	phy0: phy@0 {
-		reg = <0>;
-		max-speed = <100>;
-	};
-};
-
-&gpio {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <400000>;
-	eeprom@54 {
-		compatible = "atmel,24c64";
-		reg = <0x54>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-	eeprom@55 {
-		compatible = "atmel,24c64";
-		reg = <0x55>;
-	};
-};
-
-&nand0 {
-	status = "okay";
-	arasan,has-mdma;
-	num-cs = <1>;
-
-	partition@0 {	/* for testing purpose */
-		label = "nand-fsbl-uboot";
-		reg = <0x0 0x0 0x400000>;
-	};
-	partition@1 {	/* for testing purpose */
-		label = "nand-linux";
-		reg = <0x0 0x400000 0x1400000>;
-	};
-	partition@2 {	/* for testing purpose */
-		label = "nand-device-tree";
-		reg = <0x0 0x1800000 0x400000>;
-	};
-	partition@3 {	/* for testing purpose */
-		label = "nand-rootfs";
-		reg = <0x0 0x1C00000 0x1400000>;
-	};
-	partition@4 {	/* for testing purpose */
-		label = "nand-bitstream";
-		reg = <0x0 0x3000000 0x400000>;
-	};
-	partition@5 {	/* for testing purpose */
-		label = "nand-misc";
-		reg = <0x0 0x3400000 0xFCC00000>;
-	};
-};
-
-&qspi {
-	status = "okay";
-	flash@0 {
-		compatible = "m25p80";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x0>;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		spi-max-frequency = <10000000>;
-		partition@qspi-fsbl-uboot { /* for testing purpose */
-			label = "qspi-fsbl-uboot";
-			reg = <0x0 0x100000>;
-		};
-		partition@qspi-linux { /* for testing purpose */
-			label = "qspi-linux";
-			reg = <0x100000 0x500000>;
-		};
-		partition@qspi-device-tree { /* for testing purpose */
-			label = "qspi-device-tree";
-			reg = <0x600000 0x20000>;
-		};
-		partition@qspi-rootfs { /* for testing purpose */
-			label = "qspi-rootfs";
-			reg = <0x620000 0x5E0000>;
-		};
-	};
-};
-
-&sata {
-	status = "okay";
-	ceva,broken-gen2;
-	/* SATA Phy OOB timing settings */
-	ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-	ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-	ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-	ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
-	ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-	ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-	ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-	ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
-};
-
-&sdhci0 {
-	status = "okay";
-	bus-width = <8>;
-	xlnx,mio_bank = <2>;
-};
-
-&sdhci1 {
-	status = "okay";
-	xlnx,mio_bank = <1>;
-};
-
-&spi0 {
-	status = "okay";
-	num-cs = <1>;
-	spi0_flash0: spi0_flash0@0 {
-		compatible = "m25p80";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-
-		spi0_flash0@0 {
-			label = "spi0_flash0";
-			reg = <0x0 0x100000>;
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	num-cs = <1>;
-	spi1_flash0: spi1_flash0@0 {
-		compatible = "m25p80";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-
-		spi1_flash0@0 {
-			label = "spi1_flash0";
-			reg = <0x0 0x100000>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&dwc3_0 {
-	status = "okay";
-	dr_mode = "peripheral";
-	maximum-speed = "high-speed";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-	maximum-speed = "high-speed";
-};
-
-&watchdog0 {
-	status = "okay";
-};
-
-&xlnx_dp {
-	xlnx,max-pclock-frequency = <200000>;
-};
-
-&xlnx_dpdma {
-	xlnx,axi-clock-freq = <200000000>;
-};