summaryrefslogtreecommitdiff
path: root/arch/arm/dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/dts')
-rw-r--r--arch/arm/dts/Makefile2
-rw-r--r--arch/arm/dts/zynq-7000.dtsi135
-rw-r--r--arch/arm/dts/zynq-zc770-xm011.dts8
-rw-r--r--arch/arm/dts/zynqmp-clk-ccf.dtsi22
-rw-r--r--arch/arm/dts/zynqmp-clk.dtsi4
-rw-r--r--arch/arm/dts/zynqmp-mini-nand.dts49
-rw-r--r--arch/arm/dts/zynqmp-zcu100-revC.dts9
-rw-r--r--arch/arm/dts/zynqmp-zcu102-revA.dts12
-rw-r--r--arch/arm/dts/zynqmp-zcu102-revB.dts2
-rw-r--r--arch/arm/dts/zynqmp-zcu106-revA.dts5
-rw-r--r--arch/arm/dts/zynqmp-zcu111-revA.dts5
-rw-r--r--arch/arm/dts/zynqmp-zcu1275-revB.dts4
-rw-r--r--arch/arm/dts/zynqmp-zcu1285-revA.dts245
-rw-r--r--arch/arm/dts/zynqmp-zcu208-revA.dts588
-rw-r--r--arch/arm/dts/zynqmp-zcu216-revA.dts6
-rw-r--r--arch/arm/dts/zynqmp.dtsi14
16 files changed, 1023 insertions, 87 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index adb843c885..04a8cccda5 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -282,6 +282,8 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \
zynqmp-zcu111-revA.dtb \
zynqmp-zcu1275-revA.dtb \
zynqmp-zcu1275-revB.dtb \
+ zynqmp-zcu1285-revA.dtb \
+ zynqmp-zcu208-revA.dtb \
zynqmp-zcu216-revA.dtb \
zynqmp-zc1232-revA.dtb \
zynqmp-zc1254-revA.dtb \
diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index 07dfa0d107..c35eb2344f 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -62,6 +62,39 @@
regulator-always-on;
};
+ replicator {
+ compatible = "arm,coresight-static-replicator";
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* replicator output ports */
+ port@0 {
+ reg = <0>;
+ replicator_out_port0: endpoint {
+ remote-endpoint = <&tpiu_in_port>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ replicator_out_port1: endpoint {
+ remote-endpoint = <&etb_in_port>;
+ };
+ };
+ };
+ in-ports {
+ /* replicator input port */
+ port {
+ replicator_in_port0: endpoint {
+ remote-endpoint = <&funnel_out_port>;
+ };
+ };
+ };
+ };
+
amba: amba {
u-boot,dm-pre-reloc;
compatible = "simple-bus";
@@ -415,5 +448,107 @@
reg = <0xf8005000 0x1000>;
timeout-sec = <10>;
};
+
+ etb@f8801000 {
+ compatible = "arm,coresight-etb10", "arm,primecell";
+ reg = <0xf8801000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ in-ports {
+ port {
+ etb_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
+ };
+ };
+ };
+
+ tpiu@f8803000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0xf8803000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
+ };
+ };
+ };
+
+ funnel@f8804000 {
+ compatible = "arm,coresight-static-funnel", "arm,primecell";
+ reg = <0xf8804000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+ /* funnel output ports */
+ out-ports {
+ port {
+ funnel_out_port: endpoint {
+ remote-endpoint =
+ <&replicator_in_port0>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* funnel input ports */
+ port@0 {
+ reg = <0>;
+ funnel0_in_port0: endpoint {
+ remote-endpoint = <&ptm0_out_port>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ funnel0_in_port1: endpoint {
+ remote-endpoint = <&ptm1_out_port>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ funnel0_in_port2: endpoint {
+ };
+ };
+ /* The other input ports are not connect to anything */
+ };
+ };
+
+ ptm@f889c000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0xf889c000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ cpu = <&cpu0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port0>;
+ };
+ };
+ };
+ };
+
+ ptm@f889d000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0xf889d000 0x1000>;
+ clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+ clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+ cpu = <&cpu1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port1>;
+ };
+ };
+ };
+ };
};
};
diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts
index 1123bfc743..61482017d6 100644
--- a/arch/arm/dts/zynq-zc770-xm011.dts
+++ b/arch/arm/dts/zynq-zc770-xm011.dts
@@ -47,6 +47,14 @@
};
};
+&nand0 {
+ status = "okay";
+};
+
+&smcc {
+ status = "okay";
+};
+
&spi0 {
status = "okay";
num-cs = <4>;
diff --git a/arch/arm/dts/zynqmp-clk-ccf.dtsi b/arch/arm/dts/zynqmp-clk-ccf.dtsi
index 998298cc9b..8eacd22d7c 100644
--- a/arch/arm/dts/zynqmp-clk-ccf.dtsi
+++ b/arch/arm/dts/zynqmp-clk-ccf.dtsi
@@ -2,7 +2,7 @@
/*
* Clock specification for Xilinx ZynqMP
*
- * (C) Copyright 2017, Xilinx, Inc.
+ * (C) Copyright 2017 - 2019, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*/
@@ -173,26 +173,30 @@
};
&gem0 {
- clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>, <&zynqmp_clk GEM0_TX>,
- <&zynqmp_clk GEM0_RX>, <&zynqmp_clk GEM_TSU>;
+ clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>,
+ <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>,
+ <&zynqmp_clk GEM_TSU>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
};
&gem1 {
- clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>, <&zynqmp_clk GEM1_TX>,
- <&zynqmp_clk GEM1_RX>, <&zynqmp_clk GEM_TSU>;
+ clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
+ <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
+ <&zynqmp_clk GEM_TSU>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
};
&gem2 {
- clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>, <&zynqmp_clk GEM2_TX>,
- <&zynqmp_clk GEM2_RX>, <&zynqmp_clk GEM_TSU>;
+ clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>,
+ <&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_RX>,
+ <&zynqmp_clk GEM_TSU>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
};
&gem3 {
- clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>, <&zynqmp_clk GEM3_TX>,
- <&zynqmp_clk GEM3_RX>, <&zynqmp_clk GEM_TSU>;
+ clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>,
+ <&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_RX>,
+ <&zynqmp_clk GEM_TSU>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
};
diff --git a/arch/arm/dts/zynqmp-clk.dtsi b/arch/arm/dts/zynqmp-clk.dtsi
index 9ef55ad0d1..c9464ec8eb 100644
--- a/arch/arm/dts/zynqmp-clk.dtsi
+++ b/arch/arm/dts/zynqmp-clk.dtsi
@@ -61,13 +61,13 @@
clock-accuracy = <100>;
};
- dpdma_clk: dpdma_clk {
+ dpdma_clk: dpdma-clk {
compatible = "fixed-clock";
#clock-cells = <0x0>;
clock-frequency = <533000000>;
};
- drm_clock: drm_clock {
+ drm_clock: drm-clock {
compatible = "fixed-clock";
#clock-cells = <0x0>;
clock-frequency = <262750000>;
diff --git a/arch/arm/dts/zynqmp-mini-nand.dts b/arch/arm/dts/zynqmp-mini-nand.dts
index 93aa193f01..d376ade834 100644
--- a/arch/arm/dts/zynqmp-mini-nand.dts
+++ b/arch/arm/dts/zynqmp-mini-nand.dts
@@ -50,55 +50,6 @@
#size-cells = <1>;
arasan,has-mdma;
num-cs = <2>;
-
- partition@0 { /* for testing purpose */
- label = "nand-fsbl-uboot";
- reg = <0x0 0x0 0x400000>;
- };
- partition@1 { /* for testing purpose */
- label = "nand-linux";
- reg = <0x0 0x400000 0x1400000>;
- };
- partition@2 { /* for testing purpose */
- label = "nand-device-tree";
- reg = <0x0 0x1800000 0x400000>;
- };
- partition@3 { /* for testing purpose */
- label = "nand-rootfs";
- reg = <0x0 0x1C00000 0x1400000>;
- };
- partition@4 { /* for testing purpose */
- label = "nand-bitstream";
- reg = <0x0 0x3000000 0x400000>;
- };
- partition@5 { /* for testing purpose */
- label = "nand-misc";
- reg = <0x0 0x3400000 0xFCC00000>;
- };
- partition@6 { /* for testing purpose */
- label = "nand1-fsbl-uboot";
- reg = <0x1 0x0 0x400000>;
- };
- partition@7 { /* for testing purpose */
- label = "nand1-linux";
- reg = <0x1 0x400000 0x1400000>;
- };
- partition@8 { /* for testing purpose */
- label = "nand1-device-tree";
- reg = <0x1 0x1800000 0x400000>;
- };
- partition@9 { /* for testing purpose */
- label = "nand1-rootfs";
- reg = <0x1 0x1C00000 0x1400000>;
- };
- partition@10 { /* for testing purpose */
- label = "nand1-bitstream";
- reg = <0x1 0x3000000 0x400000>;
- };
- partition@11 { /* for testing purpose */
- label = "nand1-misc";
- reg = <0x1 0x3400000 0xFCC00000>;
- };
};
};
};
diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts
index 14aa98de73..21118c8cc3 100644
--- a/arch/arm/dts/zynqmp-zcu100-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu100-revC.dts
@@ -11,7 +11,7 @@
/dts-v1/;
#include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
@@ -53,7 +53,7 @@
label = "sw4";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
- gpio-key,wakeup;
+ wakeup-source;
autorepeat;
};
};
@@ -95,7 +95,7 @@
linux,default-trigger = "bluetooth-power";
};
- vbus_det { /* U5 USB5744 VBUS detection via MIO25 */
+ vbus-det { /* U5 USB5744 VBUS detection via MIO25 */
label = "vbus_det";
gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -120,9 +120,10 @@
regulator-boot-on;
};
- sdio_pwrseq: sdio_pwrseq {
+ sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+ post-power-on-delay-ms = <10>;
};
ina226 {
diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index 78110c490e..b580f9263d 100644
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -51,14 +51,14 @@
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_DOWN>;
- gpio-key,wakeup;
+ wakeup-source;
autorepeat;
};
};
leds {
compatible = "gpio-leds";
- heartbeat_led {
+ heartbeat-led {
label = "heartbeat";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
@@ -213,25 +213,25 @@
gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
"PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
"", "", "", "", "", "", "", "", "";
- gtr_sel0 {
+ gtr-sel0 {
gpio-hog;
gpios = <0 0>;
output-low; /* PCIE = 0, DP = 1 */
line-name = "sel0";
};
- gtr_sel1 {
+ gtr-sel1 {
gpio-hog;
gpios = <1 0>;
output-high; /* PCIE = 0, DP = 1 */
line-name = "sel1";
};
- gtr_sel2 {
+ gtr-sel2 {
gpio-hog;
gpios = <2 0>;
output-high; /* PCIE = 0, USB0 = 1 */
line-name = "sel2";
};
- gtr_sel3 {
+ gtr-sel3 {
gpio-hog;
gpios = <3 0>;
output-high; /* PCIE = 0, SATA = 1 */
diff --git a/arch/arm/dts/zynqmp-zcu102-revB.dts b/arch/arm/dts/zynqmp-zcu102-revB.dts
index 2132024a25..38ec188164 100644
--- a/arch/arm/dts/zynqmp-zcu102-revB.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revB.dts
@@ -25,7 +25,7 @@
/* reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; */
};
/* Cleanup from RevA */
- /delete-node/ phy@21;
+ /delete-node/ ethernet-phy@21;
};
/* Fix collision with u61 */
diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index b4dd101330..d31982fce7 100644
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -51,14 +51,14 @@
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_DOWN>;
- gpio-key,wakeup;
+ wakeup-source;
autorepeat;
};
};
leds {
compatible = "gpio-leds";
- heartbeat_led {
+ heartbeat-led {
label = "heartbeat";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
@@ -653,7 +653,6 @@
/* SD1 with level shifter */
&sdhci1 {
status = "okay";
- no-1-8-v;
xlnx,mio_bank = <1>;
};
diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index aabf73dd6d..bff224f78d 100644
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -51,14 +51,14 @@
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_DOWN>;
- gpio-key,wakeup;
+ wakeup-source;
autorepeat;
};
};
leds {
compatible = "gpio-leds";
- heartbeat_led {
+ heartbeat-led {
label = "heartbeat";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
@@ -566,7 +566,6 @@
/* SD1 with level shifter */
&sdhci1 {
status = "okay";
- no-1-8-v;
disable-wp;
xlnx,mio_bank = <1>;
};
diff --git a/arch/arm/dts/zynqmp-zcu1275-revB.dts b/arch/arm/dts/zynqmp-zcu1275-revB.dts
index 34c4becd43..2ec29b0b5d 100644
--- a/arch/arm/dts/zynqmp-zcu1275-revB.dts
+++ b/arch/arm/dts/zynqmp-zcu1275-revB.dts
@@ -75,6 +75,10 @@
&sdhci1 {
status = "okay";
+ /*
+ * 1.0 revision has level shifter and this property should be
+ * removed for supporting UHS mode
+ */
no-1-8-v;
xlnx,mio_bank = <1>;
};
diff --git a/arch/arm/dts/zynqmp-zcu1285-revA.dts b/arch/arm/dts/zynqmp-zcu1285-revA.dts
new file mode 100644
index 0000000000..9c18013138
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zcu1285-revA.dts
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP ZCU1285 RevA
+ *
+ * (C) Copyright 2018 - 2019, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ * Siva Durga Prasad Paladugu <sivadur@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+ model = "ZynqMP ZCU1285 RevA";
+ compatible = "xlnx,zynqmp-zcu1285-revA", "xlnx,zynqmp-zcu1285",
+ "xlnx,zynqmp";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &dcc;
+ spi0 = &qspi;
+ mmc0 = &sdhci1;
+ i2c = &i2c0; /* EMIO */
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ ina226-u60 {
+ compatible = "iio-hwmon";
+ io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>;
+ };
+ ina226-u61 {
+ compatible = "iio-hwmon";
+ io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>;
+ };
+ ina226-u63 {
+ compatible = "iio-hwmon";
+ io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>;
+ };
+ ina226-u65 {
+ compatible = "iio-hwmon";
+ io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+ };
+ ina226-u64 {
+ compatible = "iio-hwmon";
+ io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>;
+ };
+};
+
+&dcc {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ i2c-mux@75 {
+ compatible = "nxp,pca9548"; /* u22 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* PMBUS */
+ max20751@74 { /* u23 */
+ compatible = "maxim,max20751";
+ reg = <0x74>;
+ };
+ max20751@70 { /* u89 */
+ compatible = "maxim,max20751";
+ reg = <0x70>;
+ };
+ max15301@a { /* u28 */
+ compatible = "maxim,max15301";
+ reg = <0xa>;
+ };
+ max15303@b { /* u48 */
+ compatible = "maxim,max15303";
+ reg = <0xb>;
+ };
+ max15303@d { /* u27 */
+ compatible = "maxim,max15303";
+ reg = <0xd>;
+ };
+ max15303@e { /* u11 */
+ compatible = "maxim,max15303";
+ reg = <0xe>;
+ };
+ max15303@f { /* u96 */
+ compatible = "maxim,max15303";
+ reg = <0xf>;
+ };
+ max15303@11 { /* u47 */
+ compatible = "maxim,max15303";
+ reg = <0x11>;
+ };
+ max15303@12 { /* u24 */
+ compatible = "maxim,max15303";
+ reg = <0x12>;
+ };
+ max15301@13 { /* u29 */
+ compatible = "maxim,max15301";
+ reg = <0x13>;
+ };
+ max15303@14 { /* u51 */
+ compatible = "maxim,max15303";
+ reg = <0x14>;
+ };
+ max15303@15 { /* u30 */
+ compatible = "maxim,max15303";
+ reg = <0x15>;
+ };
+ max15303@16 { /* u102 */
+ compatible = "maxim,max15303";
+ reg = <0x16>;
+ };
+ max15301@17 { /* u50 */
+ compatible = "maxim,max15301";
+ reg = <0x17>;
+ };
+ max15301@18 { /* u31 */
+ compatible = "maxim,max15301";
+ reg = <0x18>;
+ };
+ };
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* CM_I2C */
+ };
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* SYS_EEPROM */
+ eeprom: eeprom@54 { /* u101 */
+ compatible = "atmel,24c32"; /* 24LC32A */
+ reg = <0x54>;
+ };
+ };
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* FMC1 */
+ };
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ /* FMC2 */
+ };
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ /* ANALOG_PMBUS */
+ u60: ina226@40 { /* u60 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u60";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+ u61: ina226@41 { /* u61 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u61";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+ u63: ina226@42 { /* u63 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u63";
+ reg = <0x42>;
+ shunt-resistor = <1000>;
+ };
+ u65: ina226@43 { /* u65 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u65";
+ reg = <0x43>;
+ shunt-resistor = <1000>;
+ };
+ u64: ina226@44 { /* u64 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u64";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+ };
+ i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /* ANALOG_CM_I2C */
+ };
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ /* FMC3 */
+ };
+ };
+};
+
+&qspi {
+ status = "okay";
+ flash@0 {
+ compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <1>;
+ spi-max-frequency = <108000000>; /* Based on DC1 spec */
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&sdhci1 {
+ status = "okay";
+ xlnx,mio_bank = <1>;
+};
diff --git a/arch/arm/dts/zynqmp-zcu208-revA.dts b/arch/arm/dts/zynqmp-zcu208-revA.dts
new file mode 100644
index 0000000000..9181060b89
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zcu208-revA.dts
@@ -0,0 +1,588 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU208
+ *
+ * (C) Copyright 2017 - 2019, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+ model = "ZynqMP ZCU208 RevA";
+ compatible = "xlnx,zynqmp-zcu208-revA", "xlnx,zynqmp-zcu208", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem3;
+ gpio0 = &gpio;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci1;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ serial1 = &dcc;
+ spi0 = &qspi;
+ usb0 = &usb0;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ xlnx,eeprom = &eeprom;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ sw19 {
+ label = "sw19";
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_DOWN>;
+ gpio-key,wakeup;
+ autorepeat;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ heartbeat_led {
+ label = "heartbeat";
+ gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ ina226-vccint {
+ compatible = "iio-hwmon";
+ io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>;
+ };
+ ina226-vccint-io-bram-ps {
+ compatible = "iio-hwmon";
+ io-channels = <&vccint_io_bram_ps 0>, <&vccint_io_bram_ps 1>, <&vccint_io_bram_ps 2>, <&vccint_io_bram_ps 3>;
+ };
+ ina226-vcc1v8 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcc1v8 0>, <&vcc1v8 1>, <&vcc1v8 2>, <&vcc1v8 3>;
+ };
+ ina226-vcc1v2 {
+ compatible = "iio-hwmon";
+ io-channels = <&vcc1v2 0>, <&vcc1v2 1>, <&vcc1v2 2>, <&vcc1v2 3>;
+ };
+ ina226-vadj-fmc {
+ compatible = "iio-hwmon";
+ io-channels = <&vadj_fmc 0>, <&vadj_fmc 1>, <&vadj_fmc 2>, <&vadj_fmc 3>;
+ };
+ ina226-mgtavcc {
+ compatible = "iio-hwmon";
+ io-channels = <&mgtavcc 0>, <&mgtavcc 1>, <&mgtavcc 2>, <&mgtavcc 3>;
+ };
+ ina226-mgt1v2 {
+ compatible = "iio-hwmon";
+ io-channels = <&mgt1v2 0>, <&mgt1v2 1>, <&mgt1v2 2>, <&mgt1v2 3>;
+ };
+ ina226-mgt1v8 {
+ compatible = "iio-hwmon";
+ io-channels = <&mgt1v8 0>, <&mgt1v8 1>, <&mgt1v8 2>, <&mgt1v8 3>;
+ };
+ ina226-vccint-ams {
+ compatible = "iio-hwmon";
+ io-channels = <&vccint_ams 0>, <&vccint_ams 1>, <&vccint_ams 2>, <&vccint_ams 3>;
+ };
+ ina226-dac-avtt {
+ compatible = "iio-hwmon";
+ io-channels = <&dac_avtt 0>, <&dac_avtt 1>, <&dac_avtt 2>, <&dac_avtt 3>;
+ };
+ ina226-dac-avccaux {
+ compatible = "iio-hwmon";
+ io-channels = <&dac_avccaux 0>, <&dac_avccaux 1>, <&dac_avccaux 2>, <&dac_avccaux 3>;
+ };
+ ina226-adc-avcc {
+ compatible = "iio-hwmon";
+ io-channels = <&adc_avcc 0>, <&adc_avcc 1>, <&adc_avcc 2>, <&adc_avcc 3>;
+ };
+ ina226-adc-avccaux {
+ compatible = "iio-hwmon";
+ io-channels = <&adc_avccaux 0>, <&adc_avccaux 1>, <&adc_avccaux 2>, <&adc_avccaux 3>;
+ };
+ ina226-dac-avcc {
+ compatible = "iio-hwmon";
+ io-channels = <&dac_avcc 0>, <&dac_avcc 1>, <&dac_avcc 2>, <&dac_avcc 3>;
+ };
+};
+
+&dcc {
+ status = "okay";
+};
+
+&fpd_dma_chan1 {
+ status = "okay";
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+};
+
+&gem3 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ phy0: ethernet-phy@c {
+ reg = <0xc>;
+ ti,rx-internal-delay = <0x8>;
+ ti,tx-internal-delay = <0xa>;
+ ti,fifo-depth = <0x1>;
+ ti,dp83867-rxctrl-strap-quirk;
+ };
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names = "QSPI_LWR_CLK", "QSPI_LWR_DQ1", "QSPI_LWR_DQ2", "QSPI_LWR_DQ3", "QSPI_LWR_DQ0", /* 0 - 4 */
+ "QSPI_LWR_CS_B", "", "QSPI_UPR_CS_B", "QSPI_UPR_DQ0", "QSPI_UPR_DQ1", /* 5 - 9 */
+ "QSPI_UPR_DQ2", "QSPI_UPR_DQ3", "QSPI_UPR_CLK", "PS_GPIO2", "I2C0_SCL", /* 10 - 14 */
+ "I2C0_SDA", "I2C1_SCL", "I2C1_SDA", "UART0_TXD", "UART0_RXD", /* 15 - 19 */
+ "", "", "BUTTON", "LED", "", /* 20 - 24 */
+ "", "PMU_INPUT", "", "", "", /* 25 - 29 */
+ "", "", "PMU_GPO0", "PMU_GPO1", "PMU_GPO2", /* 30 - 34 */
+ "PMU_GPO3", "PMU_GPO4", "PMU_GPO5", "PS_GPIO1", "SDIO_SEL", /* 35 - 39 */
+ "SDIO_DIR_CMD", "SDIO_DIR_DAT0", "SDIO_DIR_DAT1", "", "", /* 40 - 44 */
+ "SDIO_DETECT", "SDIO_DAT0", "SDIO_DAT1", "SDIO_DAT2", "SDIO_DAT3", /* 45 - 49 */
+ "SDIO_CMD", "SDIO_CLK", "USB_CLK", "USB_DIR", "USB_DATA2", /* 50 - 54 */
+ "USB_NXT", "USB_DATA0", "USB_DATA1", "USB_STP", "USB_DATA3", /* 55 - 59 */
+ "USB_DATA4", "USB_DATA5", "USB_DATA6", "USB_DATA7", "ENET_TX_CLK", /* 60 - 64 */
+ "ENET_TX_D0", "ENET_TX_D1", "ENET_TX_D2", "ENET_TX_D3", "ENET_TX_CTRL", /* 65 - 69 */
+ "ENET_RX_CLK", "ENET_RX_D0", "ENET_RX_D1", "ENET_RX_D2", "ENET_RX_D3", /* 70 - 74 */
+ "ENET_RX_CTRL", "ENET_MDC", "ENET_MDIO", /* 75 - 77, MIO end and EMIO start */
+ "", "", /* 78 - 79 */
+ "", "", "", "", "", /* 80 - 84 */
+ "", "", "", "", "", /* 85 -89 */
+ "", "", "", "", "", /* 90 - 94 */
+ "", "", "", "", "", /* 95 - 99 */
+ "", "", "", "", "", /* 100 - 104 */
+ "", "", "", "", "", /* 105 - 109 */
+ "", "", "", "", "", /* 110 - 114 */
+ "", "", "", "", "", /* 115 - 119 */
+ "", "", "", "", "", /* 120 - 124 */
+ "", "", "", "", "", /* 125 - 129 */
+ "", "", "", "", "", /* 130 - 134 */
+ "", "", "", "", "", /* 135 - 139 */
+ "", "", "", "", "", /* 140 - 144 */
+ "", "", "", "", "", /* 145 - 149 */
+ "", "", "", "", "", /* 150 - 154 */
+ "", "", "", "", "", /* 155 - 159 */
+ "", "", "", "", "", /* 160 - 164 */
+ "", "", "", "", "", /* 165 - 169 */
+ "", "", "", ""; /* 170 - 174 */
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tca6416_u15: gpio@20 { /* u15 */
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller; /* interrupt not connected */
+ #gpio-cells = <2>;
+ gpio-line-names = "MAX6643_OT_B", "MAX6643_FANFAIL_B", "MIO26_PMU_INPUT_LS", "DAC_AVTT_VOUT_SEL", /* 0 - 3 */
+ "", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B", "MAX6643_FULL_SPEED", /* 4 - 7 */
+ "FMCP_HSPC_PRSNT_M2C_B", "", "", "VCCINT_VRHOT_B", /* 10 - 13 */
+ "", "8A34001_EXP_RST_B", "IRPS5401_ALERT_B", "INA226_PMBUS_ALERT"; /* 14 - 17 */
+ };
+
+ i2c-mux@75 { /* u17 */
+ compatible = "nxp,pca9544";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* PS_PMBUS */
+ /* PMBUS_ALERT done via pca9544 */
+ vccint: ina226@40 { /* u65 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vccint";
+ reg = <0x40>;
+ shunt-resistor = <5000>;
+ };
+ vccint_io_bram_ps: ina226@41 { /* u57 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vccint-io-bram-ps";
+ reg = <0x41>;
+ shunt-resistor = <5000>;
+ };
+ vcc1v8: ina226@42 { /* u60 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vcc1v8";
+ reg = <0x42>;
+ shunt-resistor = <2000>;
+ };
+ vcc1v2: ina226@43 { /* u58 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vcc1v2";
+ reg = <0x43>;
+ shunt-resistor = <5000>;
+ };
+ vadj_fmc: ina226@45 { /* u62 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vadj-fmc";
+ reg = <0x45>;
+ shunt-resistor = <5000>;
+ };
+ mgtavcc: ina226@46 { /* u67 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-mgtavcc";
+ reg = <0x46>;
+ shunt-resistor = <2000>;
+ };
+ mgt1v2: ina226@47 { /* u63 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-mgt1v2";
+ reg = <0x47>;
+ shunt-resistor = <5000>;
+ };
+ mgt1v8: ina226@48 { /* u64 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-mgt1v8";
+ reg = <0x48>;
+ shunt-resistor = <5000>;
+ };
+ vccint_ams: ina226@49 { /* u61 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-vccint-ams";
+ reg = <0x49>;
+ shunt-resistor = <5000>;
+ };
+ dac_avtt: ina226@4a { /* u59 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-dac-avtt";
+ reg = <0x4a>;
+ shunt-resistor = <5000>;
+ };
+ dac_avccaux: ina226@4b { /* u124 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-dac-avccaux";
+ reg = <0x4b>;
+ shunt-resistor = <5000>;
+ };
+ adc_avcc: ina226@4c { /* u75 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-adc-avcc";
+ reg = <0x4c>;
+ shunt-resistor = <5000>;
+ };
+ adc_avccaux: ina226@4d { /* u71 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-adc-avccaux";
+ reg = <0x4d>;
+ shunt-resistor = <5000>;
+ };
+ dac_avcc: ina226@4e { /* u77 */
+ compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-dac-avcc";
+ reg = <0x4e>;
+ shunt-resistor = <5000>;
+ };
+ };
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* NC */
+ };
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* u104 - ir35215 0x10/0x40 */
+ /* u127 - ir38164 0x1b/0x4b */
+ /* u112 - ir38164 0x13/0x43 */
+ /* u123 - ir38164 0x1c/0x4c */
+
+ irps5401_44: irps54012@44 { /* IRPS5401 - u53 */
+ #clock-cells = <0>;
+ compatible = "infineon,irps5401";
+ reg = <0x44>; /* i2c addr 0x14 */
+ };
+ irps5401_45: irps54012@45 { /* IRPS5401 - u55 */
+ #clock-cells = <0>;
+ compatible = "infineon,irps5401";
+ reg = <0x45>; /* i2c addr 0x15 */
+ };
+ /* J21 header too */
+
+ };
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* SYSMON */
+ };
+ };
+ /* u38 MPS430 */
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ i2c-mux@74 {
+ compatible = "nxp,pca9548"; /* u20 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ /* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+ i2c_eeprom: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /*
+ * IIC_EEPROM 1kB memory which uses 256B blocks
+ * where every block has different address.
+ * 0 - 256B address 0x54
+ * 256B - 512B address 0x55
+ * 512B - 768B address 0x56
+ * 768B - 1024B address 0x57
+ */
+ eeprom: eeprom@54 { /* u21 */
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+ };
+ i2c_si5341: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ si5341: clock-generator@36 { /* SI5341 - u43 */
+ compatible = "si5341";
+ reg = <0x36>;
+ };
+
+ };
+ i2c_si570_user_c0: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ si570_1: clock-generator@5d { /* USER C0 SI570 - u47 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <300000000>;
+ clock-frequency = <300000000>;
+ clock-output-names = "si570_user_c0";
+ };
+ };
+ i2c_si570_mgt: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ si570_2: clock-generator@5d { /* USER MGT SI570 - u48 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <156250000>;
+ clock-frequency = <148500000>;
+ clock-output-names = "si570_mgt";
+ };
+ };
+ i2c_8a34001: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ /* U409B - 8a34001 */
+ };
+ i2c_clk104: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ /* CLK104_SDA */
+ };
+ i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /* RFMCP connector */
+ };
+ /* 7 NC */
+ };
+
+ i2c-mux@75 {
+ compatible = "nxp,pca9548"; /* u22 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ /* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* FMCP_HSPC_IIC */
+ };
+ i2c_si570_user_c1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ si570_3: clock-generator@5d { /* USER C1 SI570 - u130 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <300000000>;
+ clock-frequency = <300000000>;
+ clock-output-names = "si570_user_c1";
+ };
+ };
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* SYSMON */
+ };
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* DDR4 SODIMM */
+ };
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ /* SFP3 */
+ };
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ /* SFP2 */
+ };
+ i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /* SFP1 */
+ };
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ /* SFP0 */
+ };
+ };
+ /* MSP430 */
+};
+
+&qspi {
+ status = "okay";
+ is-dual = <1>;
+ flash@0 {
+ compatible = "m25p80", "jedec,spi-nor"; /* U11 and U12 MT25QU02GCBBE12 1Gb */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+ spi-max-frequency = <108000000>; /* Based on DC1 spec */
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+ /* SATA OOB timing settings */
+ ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+ ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+ ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+ ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+ ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ phy-names = "sata-phy";
+ phys = <&lane3 PHY_TYPE_SATA 1 3 125000000>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+ status = "okay";
+ disable-wp;
+ xlnx,mio_bank = <1>;
+};
+
+&serdes {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+ status = "okay";
+};
+
+&dwc3_0 {
+ status = "okay";
+ dr_mode = "host";
+ snps,usb3_lpm_capable;
+ phy-names = "usb3-phy";
+ phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>;
+};
diff --git a/arch/arm/dts/zynqmp-zcu216-revA.dts b/arch/arm/dts/zynqmp-zcu216-revA.dts
index dd9cd7b38f..c294e1b51a 100644
--- a/arch/arm/dts/zynqmp-zcu216-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu216-revA.dts
@@ -253,7 +253,7 @@
#io-channel-cells = <1>;
label = "ina226-vccint-io-bram-ps";
reg = <0x41>;
- shunt-resistor = <2000>;
+ shunt-resistor = <5000>;
};
vcc1v8: ina226@42 { /* u60 */
compatible = "ti,ina226";
@@ -302,7 +302,7 @@
#io-channel-cells = <1>;
label = "ina226-vccint-ams";
reg = <0x49>;
- shunt-resistor = <2000>;
+ shunt-resistor = <5000>;
};
dac_avtt: ina226@4a { /* u59 */
compatible = "ti,ina226";
@@ -401,7 +401,7 @@
* 768B - 1024B address 0x57
*/
eeprom: eeprom@54 { /* u21 */
- compatible = "atmel,24c08";
+ compatible = "atmel,24c128";
reg = <0x54>;
};
};
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index b453941baf..9e7fae83f7 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -25,7 +25,7 @@
#size-cells = <0>;
cpu0: cpu@0 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
operating-points-v2 = <&cpu_opp_table>;
@@ -34,7 +34,7 @@
};
cpu1: cpu@1 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
reg = <0x1>;
@@ -43,7 +43,7 @@
};
cpu2: cpu@2 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
reg = <0x2>;
@@ -52,7 +52,7 @@
};
cpu3: cpu@3 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
reg = <0x3>;
@@ -74,7 +74,7 @@
};
};
- cpu_opp_table: cpu_opp_table {
+ cpu_opp_table: cpu-opp-table {
compatible = "operating-points-v2";
opp-shared;
opp00 {
@@ -252,7 +252,7 @@
};
};
- amba_apu: amba_apu@0 {
+ amba_apu: amba-apu@0 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
@@ -626,12 +626,12 @@
compatible = "xlnx,zynqmp-gpio-1.0";
status = "disabled";
#gpio-cells = <0x2>;
+ gpio-controller;
interrupt-parent = <&gic>;
interrupts = <0 16 4>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0xff0a0000 0x0 0x1000>;
- gpio-controller;
power-domains = <&zynqmp_firmware PD_GPIO>;
};
generated by cgit (git 2.34.1) at 2025-01-11 09:22:28 +0000