summaryrefslogtreecommitdiff
path: root/arch/arm/dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/dts')
-rw-r--r--arch/arm/dts/sun6i-a31-app4-evb1.dts7
-rw-r--r--arch/arm/dts/sun6i-a31-colombus.dts26
-rw-r--r--arch/arm/dts/sun6i-a31-hummingbird.dts153
-rw-r--r--arch/arm/dts/sun6i-a31-i7.dts82
-rw-r--r--arch/arm/dts/sun6i-a31-m9.dts23
-rw-r--r--arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts23
-rw-r--r--arch/arm/dts/sun6i-a31.dtsi1151
-rw-r--r--arch/arm/dts/sun6i-a31s-cs908.dts2
-rw-r--r--arch/arm/dts/sun6i-a31s-primo81.dts69
-rw-r--r--arch/arm/dts/sun6i-a31s-sina31s-core.dtsi1
-rw-r--r--arch/arm/dts/sun6i-a31s-sina31s.dts77
-rw-r--r--arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts154
-rw-r--r--arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts13
-rw-r--r--arch/arm/dts/sun6i-a31s.dtsi8
-rw-r--r--arch/arm/dts/sun6i-reference-design-tablet.dtsi18
15 files changed, 1179 insertions, 628 deletions
diff --git a/arch/arm/dts/sun6i-a31-app4-evb1.dts b/arch/arm/dts/sun6i-a31-app4-evb1.dts
index 2f8cfab771..7f34323a66 100644
--- a/arch/arm/dts/sun6i-a31-app4-evb1.dts
+++ b/arch/arm/dts/sun6i-a31-app4-evb1.dts
@@ -47,7 +47,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Allwinner A31 APP4 EVB1 Evaluation Board";
@@ -68,10 +67,8 @@
&pio {
usb1_vbus_pin_a: usb1_vbus_pin@0 {
- allwinner,pins = "PH27";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH27";
+ function = "gpio_out";
};
};
diff --git a/arch/arm/dts/sun6i-a31-colombus.dts b/arch/arm/dts/sun6i-a31-colombus.dts
index f9cf36888d..939c497a6f 100644
--- a/arch/arm/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/dts/sun6i-a31-colombus.dts
@@ -47,7 +47,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "WITS A31 Colombus Evaluation Board";
@@ -118,35 +117,30 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
vmmc-supply = <&reg_vcc3v0>;
bus-width = <4>;
- cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
- cd-inverted;
+ cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
status = "okay";
};
&mmc0_pins_a {
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&pio {
mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
- allwinner,pins = "PA8";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA8";
+ function = "gpio_in";
+ bias-pull-up;
};
usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
- allwinner,pins = "PH24";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH24";
+ function = "gpio_out";
};
i2c_lcd_pins: i2c_lcd_pin@0 {
- allwinner,pins = "PA23", "PA24";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA23", "PA24";
+ function = "gpio_out";
+ bias-pull-up;
};
};
diff --git a/arch/arm/dts/sun6i-a31-hummingbird.dts b/arch/arm/dts/sun6i-a31-hummingbird.dts
index 9a74637f67..ce4f9e9834 100644
--- a/arch/arm/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/dts/sun6i-a31-hummingbird.dts
@@ -47,7 +47,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Merrii A31 Hummingbird";
@@ -63,16 +62,98 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ vga-connector {
+ compatible = "vga-connector";
+
+ port {
+ vga_con_in: endpoint {
+ remote-endpoint = <&vga_dac_out>;
+ };
+ };
+ };
+
+ vga-dac {
+ compatible = "dumb-vga-dac";
+ vdd-supply = <&reg_vga_3v3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ vga_dac_in: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_vga>;
+ };
+ };
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ vga_dac_out: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vga_con_in>;
+ };
+ };
+ };
+ };
+
+ reg_vga_3v3: vga_3v3_regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vga-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
};
};
+&codec {
+ allwinner,audio-routing =
+ "Headphone", "HP",
+ "Speaker", "LINEOUT",
+ "LINEIN", "Line In",
+ "MIC1", "Mic",
+ "MIC2", "Headset Mic",
+ "Mic", "MBIAS",
+ "Headset Mic", "HBIAS";
+ allwinner,pa-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <&reg_dcdc3>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -92,6 +173,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -127,14 +218,13 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
- cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
- cd-inverted;
+ cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
status = "okay";
};
&mmc0_pins_a {
/* external pull-ups missing for some pins */
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&mmc1 {
@@ -153,24 +243,19 @@
&pio {
gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 {
- allwinner,pins = "PA21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA21";
+ function = "gpio_out";
};
mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
- allwinner,pins = "PA8";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA8";
+ function = "gpio_in";
+ bias-pull-up;
};
wifi_reset_pin_hummingbird: wifi_reset_pin@0 {
- allwinner,pins = "PG10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG10";
+ function = "gpio_out";
};
};
@@ -182,11 +267,16 @@
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ x-powers,drive-vbus-en;
};
};
#include "axp22x.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
&reg_aldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -240,23 +330,48 @@
regulator-name = "vcc-dram";
};
+&reg_drivevbus {
+ regulator-name = "usb0-vbus";
+ status = "okay";
+};
+
&reg_usb1_vbus {
gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
status = "okay";
};
+&tcon0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd0_rgb888_pins>;
+};
+
+&tcon0_out {
+ tcon0_out_vga: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vga_dac_in>;
+ };
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
-&usb1_vbus_pin_a {
- /* different pin from sunxi-common-regulators */
- allwinner,pins = "PH24";
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
};
&usbphy {
+ usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+ usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <&reg_drivevbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};
diff --git a/arch/arm/dts/sun6i-a31-i7.dts b/arch/arm/dts/sun6i-a31-i7.dts
index e9185dad67..d659be9dbc 100644
--- a/arch/arm/dts/sun6i-a31-i7.dts
+++ b/arch/arm/dts/sun6i-a31-i7.dts
@@ -45,7 +45,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Mele I7 Quad top set box";
@@ -59,6 +58,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -69,6 +79,33 @@
gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
};
};
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "On-board SPDIF";
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ };
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Headphone", "HP";
+ status = "okay";
+};
+
+&de {
+ status = "okay";
};
&ehci0 {
@@ -91,6 +128,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
@@ -102,31 +149,25 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
- cd-inverted;
+ cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
status = "okay";
};
&pio {
led_pins_i7: led_pins@0 {
- allwinner,pins = "PH13";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH13";
+ function = "gpio_out";
};
mmc0_cd_pin_i7: mmc0_cd_pin@0 {
- allwinner,pins = "PH22";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH22";
+ function = "gpio_in";
+ bias-pull-up;
};
usb1_vbus_pin_i7: usb1_vbus_pin@0 {
- allwinner,pins = "PC27";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC27";
+ function = "gpio_out";
};
};
@@ -137,6 +178,17 @@
status = "okay";
};
+&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_pins_a>;
+ spdif-out = "okay";
+ status = "okay";
+};
+
+&tcon0 {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm/dts/sun6i-a31-m9.dts b/arch/arm/dts/sun6i-a31-m9.dts
index 29016a13a2..9698f6d38d 100644
--- a/arch/arm/dts/sun6i-a31-m9.dts
+++ b/arch/arm/dts/sun6i-a31-m9.dts
@@ -45,7 +45,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Mele M9 top set box";
@@ -108,8 +107,7 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
- cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
- cd-inverted;
+ cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
status = "okay";
};
@@ -128,24 +126,19 @@
&pio {
led_pins_m9: led_pins@0 {
- allwinner,pins = "PH13";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH13";
+ function = "gpio_out";
};
mmc0_cd_pin_m9: mmc0_cd_pin@0 {
- allwinner,pins = "PH22";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH22";
+ function = "gpio_in";
+ bias-pull-up;
};
usb1_vbus_pin_m9: usb1_vbus_pin@0 {
- allwinner,pins = "PC27";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC27";
+ function = "gpio_out";
};
};
diff --git a/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts
index 5faeae429e..bb14b171b1 100644
--- a/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts
+++ b/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts
@@ -45,7 +45,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Mele A1000G Quad top set box";
@@ -108,8 +107,7 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
- cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
- cd-inverted;
+ cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
status = "okay";
};
@@ -128,24 +126,19 @@
&pio {
led_pins_m9: led_pins@0 {
- allwinner,pins = "PH13";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH13";
+ function = "gpio_out";
};
mmc0_cd_pin_m9: mmc0_cd_pin@0 {
- allwinner,pins = "PH22";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH22";
+ function = "gpio_in";
+ bias-pull-up;
};
usb1_vbus_pin_m9: usb1_vbus_pin@0 {
- allwinner,pins = "PC27";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC27";
+ function = "gpio_out";
};
};
diff --git a/arch/arm/dts/sun6i-a31.dtsi b/arch/arm/dts/sun6i-a31.dtsi
index b674bf79bc..c72992556a 100644
--- a/arch/arm/dts/sun6i-a31.dtsi
+++ b/arch/arm/dts/sun6i-a31.dtsi
@@ -47,7 +47,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/clock/sun6i-a31-ccu.h>
+#include <dt-bindings/reset/sun6i-a31-ccu.h>
/ {
interrupt-parent = <&gic>;
@@ -65,7 +66,10 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&pll6 0>;
+ clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>,
+ <&ccu CLK_AHB1_HDMI>, <&ccu CLK_DRAM_BE0>,
+ <&ccu CLK_IEP_DRC0>, <&ccu CLK_BE0>,
+ <&ccu CLK_LCD0_CH1>, <&ccu CLK_HDMI>;
status = "disabled";
};
@@ -73,7 +77,9 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
- clocks = <&pll6 0>;
+ clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>,
+ <&ccu CLK_DRAM_BE0>, <&ccu CLK_IEP_DRC0>,
+ <&ccu CLK_BE0>, <&ccu CLK_LCD0_CH0>;
status = "disabled";
};
};
@@ -97,7 +103,7 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
- clocks = <&cpu>;
+ clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
@@ -107,8 +113,6 @@
480000 1000000
>;
#cooling-cells = <2>;
- cooling-min-level = <0>;
- cooling-max-level = <3>;
};
cpu@1 {
@@ -192,235 +196,6 @@
clock-output-names = "osc32k";
};
- pll1: clk@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun6i-a31-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
- };
-
- pll6: clk@01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun6i-a31-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6", "pll6x2";
- };
-
- cpu: cpu@01c20050 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20050 0x4>;
-
- /*
- * PLL1 is listed twice here.
- * While it looks suspicious, it's actually documented
- * that way both in the datasheet and in the code from
- * Allwinner.
- */
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
- clock-output-names = "cpu";
- };
-
- axi: axi@01c20050 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20050 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
- };
-
- ahb1: ahb1@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun6i-a31-ahb1-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
- clock-output-names = "ahb1";
-
- /*
- * Clock AHB1 from PLL6, instead of CPU/AXI which
- * has rate changes due to cpufreq. Also the DMA
- * controller requires AHB1 clocked from PLL6.
- */
- assigned-clocks = <&ahb1>;
- assigned-clock-parents = <&pll6 0>;
- };
-
- ahb1_gates: clk@01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb1>;
- clock-indices = <1>, <5>,
- <6>, <8>, <9>,
- <10>, <11>, <12>,
- <13>, <14>,
- <17>, <18>, <19>,
- <20>, <21>, <22>,
- <23>, <24>, <26>,
- <27>, <29>,
- <30>, <31>, <32>,
- <36>, <37>, <40>,
- <43>, <44>, <45>,
- <46>, <47>, <50>,
- <52>, <55>, <56>,
- <57>, <58>;
- clock-output-names = "ahb1_mipidsi", "ahb1_ss",
- "ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
- "ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
- "ahb1_nand0", "ahb1_sdram",
- "ahb1_gmac", "ahb1_ts", "ahb1_hstimer",
- "ahb1_spi0", "ahb1_spi1", "ahb1_spi2",
- "ahb1_spi3", "ahb1_otg", "ahb1_ehci0",
- "ahb1_ehci1", "ahb1_ohci0",
- "ahb1_ohci1", "ahb1_ohci2", "ahb1_ve",
- "ahb1_lcd0", "ahb1_lcd1", "ahb1_csi",
- "ahb1_hdmi", "ahb1_de0", "ahb1_de1",
- "ahb1_fe0", "ahb1_fe1", "ahb1_mp",
- "ahb1_gpu", "ahb1_deu0", "ahb1_deu1",
- "ahb1_drc0", "ahb1_drc1";
- };
-
- apb1: apb1@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb1>;
- clock-output-names = "apb1";
- };
-
- apb1_gates: clk@01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun6i-a31-apb1-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb1>;
- clock-indices = <0>, <4>,
- <5>, <12>,
- <13>;
- clock-output-names = "apb1_codec", "apb1_digital_mic",
- "apb1_pio", "apb1_daudio0",
- "apb1_daudio1";
- };
-
- apb2: clk@01c20058 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
- clock-output-names = "apb2";
- };
-
- apb2_gates: clk@01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun6i-a31-apb2-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb2>;
- clock-indices = <0>, <1>,
- <2>, <3>, <16>,
- <17>, <18>, <19>,
- <20>, <21>;
- clock-output-names = "apb2_i2c0", "apb2_i2c1",
- "apb2_i2c2", "apb2_i2c3",
- "apb2_uart0", "apb2_uart1",
- "apb2_uart2", "apb2_uart3",
- "apb2_uart4", "apb2_uart5";
- };
-
- mmc0_clk: clk@01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: clk@01c2008c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: clk@01c20090 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
- };
-
- mmc3_clk: clk@01c20094 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20094 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
- clock-output-names = "mmc3",
- "mmc3_output",
- "mmc3_sample";
- };
-
- ss_clk: clk@01c2009c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
- clock-output-names = "ss";
- };
-
- spi0_clk: clk@01c200a0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
- clock-output-names = "spi0";
- };
-
- spi1_clk: clk@01c200a4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
- clock-output-names = "spi1";
- };
-
- spi2_clk: clk@01c200a8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
- clock-output-names = "spi2";
- };
-
- spi3_clk: clk@01c200ac {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200ac 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
- clock-output-names = "spi3";
- };
-
- usb_clk: clk@01c200cc {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun6i-a31-usb-clk";
- reg = <0x01c200cc 0x4>;
- clocks = <&osc24M>;
- clock-indices = <8>, <9>, <10>,
- <16>, <17>,
- <18>;
- clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
- "usb_ohci0", "usb_ohci1",
- "usb_ohci2";
- };
-
/*
* The following two are dummy clocks, placeholders
* used in the gmac_tx clock. The gmac driver will
@@ -444,7 +219,7 @@
clock-output-names = "gmac_int_tx";
};
- gmac_tx_clk: clk@01c200d0 {
+ gmac_tx_clk: clk@1c200d0 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-gmac-clk";
reg = <0x01c200d0 0x4>;
@@ -453,34 +228,135 @@
};
};
- soc@01c00000 {
+ de: display-engine {
+ compatible = "allwinner,sun6i-a31-display-engine";
+ allwinner,pipelines = <&fe0>, <&fe1>;
+ status = "disabled";
+ };
+
+ soc@1c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
- dma: dma-controller@01c02000 {
+ dma: dma-controller@1c02000 {
compatible = "allwinner,sun6i-a31-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb1_gates 6>;
- resets = <&ahb1_rst 6>;
+ clocks = <&ccu CLK_AHB1_DMA>;
+ resets = <&ccu RST_AHB1_DMA>;
#dma-cells = <1>;
};
- mmc0: mmc@01c0f000 {
- compatible = "allwinner,sun7i-a20-mmc",
- "allwinner,sun5i-a13-mmc";
+ tcon0: lcd-controller@1c0c000 {
+ compatible = "allwinner,sun6i-a31-tcon";
+ reg = <0x01c0c000 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_AHB1_LCD0>;
+ reset-names = "lcd";
+ clocks = <&ccu CLK_AHB1_LCD0>,
+ <&ccu CLK_LCD0_CH0>,
+ <&ccu CLK_LCD0_CH1>;
+ clock-names = "ahb",
+ "tcon-ch0",
+ "tcon-ch1";
+ clock-output-names = "tcon0-pixel-clock";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon0_in_drc0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&drc0_out_tcon0>;
+ };
+
+ tcon0_in_drc1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&drc1_out_tcon0>;
+ };
+ };
+
+ tcon0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon0_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon0>;
+ allwinner,tcon-channel = <1>;
+ };
+ };
+ };
+ };
+
+ tcon1: lcd-controller@1c0d000 {
+ compatible = "allwinner,sun6i-a31-tcon";
+ reg = <0x01c0d000 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_AHB1_LCD1>;
+ reset-names = "lcd";
+ clocks = <&ccu CLK_AHB1_LCD1>,
+ <&ccu CLK_LCD1_CH0>,
+ <&ccu CLK_LCD1_CH1>;
+ clock-names = "ahb",
+ "tcon-ch0",
+ "tcon-ch1";
+ clock-output-names = "tcon1-pixel-clock";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon1_in_drc0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&drc0_out_tcon1>;
+ };
+
+ tcon1_in_drc1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&drc1_out_tcon1>;
+ };
+ };
+
+ tcon1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon1_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon1>;
+ allwinner,tcon-channel = <1>;
+ };
+ };
+ };
+ };
+
+ mmc0: mmc@1c0f000 {
+ compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
- clocks = <&ahb1_gates 8>,
- <&mmc0_clk 0>,
- <&mmc0_clk 1>,
- <&mmc0_clk 2>;
+ clocks = <&ccu CLK_AHB1_MMC0>,
+ <&ccu CLK_MMC0>,
+ <&ccu CLK_MMC0_OUTPUT>,
+ <&ccu CLK_MMC0_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
- resets = <&ahb1_rst 8>;
+ resets = <&ccu RST_AHB1_MMC0>;
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -488,19 +364,18 @@
#size-cells = <0>;
};
- mmc1: mmc@01c10000 {
- compatible = "allwinner,sun7i-a20-mmc",
- "allwinner,sun5i-a13-mmc";
+ mmc1: mmc@1c10000 {
+ compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c10000 0x1000>;
- clocks = <&ahb1_gates 9>,
- <&mmc1_clk 0>,
- <&mmc1_clk 1>,
- <&mmc1_clk 2>;
+ clocks = <&ccu CLK_AHB1_MMC1>,
+ <&ccu CLK_MMC1>,
+ <&ccu CLK_MMC1_OUTPUT>,
+ <&ccu CLK_MMC1_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
- resets = <&ahb1_rst 9>;
+ resets = <&ccu RST_AHB1_MMC1>;
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -508,19 +383,18 @@
#size-cells = <0>;
};
- mmc2: mmc@01c11000 {
- compatible = "allwinner,sun7i-a20-mmc",
- "allwinner,sun5i-a13-mmc";
+ mmc2: mmc@1c11000 {
+ compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c11000 0x1000>;
- clocks = <&ahb1_gates 10>,
- <&mmc2_clk 0>,
- <&mmc2_clk 1>,
- <&mmc2_clk 2>;
+ clocks = <&ccu CLK_AHB1_MMC2>,
+ <&ccu CLK_MMC2>,
+ <&ccu CLK_MMC2_OUTPUT>,
+ <&ccu CLK_MMC2_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
- resets = <&ahb1_rst 10>;
+ resets = <&ccu RST_AHB1_MMC2>;
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -528,19 +402,18 @@
#size-cells = <0>;
};
- mmc3: mmc@01c12000 {
- compatible = "allwinner,sun7i-a20-mmc",
- "allwinner,sun5i-a13-mmc";
+ mmc3: mmc@1c12000 {
+ compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c12000 0x1000>;
- clocks = <&ahb1_gates 11>,
- <&mmc3_clk 0>,
- <&mmc3_clk 1>,
- <&mmc3_clk 2>;
+ clocks = <&ccu CLK_AHB1_MMC3>,
+ <&ccu CLK_MMC3>,
+ <&ccu CLK_MMC3_OUTPUT>,
+ <&ccu CLK_MMC3_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
- resets = <&ahb1_rst 11>;
+ resets = <&ccu RST_AHB1_MMC3>;
reset-names = "ahb";
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -548,11 +421,54 @@
#size-cells = <0>;
};
- usb_otg: usb@01c19000 {
+ hdmi: hdmi@1c16000 {
+ compatible = "allwinner,sun6i-a31-hdmi";
+ reg = <0x01c16000 0x1000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>,
+ <&ccu CLK_HDMI_DDC>,
+ <&ccu CLK_PLL_VIDEO0_2X>,
+ <&ccu CLK_PLL_VIDEO1_2X>;
+ clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1";
+ resets = <&ccu RST_AHB1_HDMI>;
+ reset-names = "ahb";
+ dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+ dmas = <&dma 13>, <&dma 13>, <&dma 14>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hdmi_in_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_hdmi>;
+ };
+
+ hdmi_in_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+
+ usb_otg: usb@1c19000 {
compatible = "allwinner,sun6i-a31-musb";
reg = <0x01c19000 0x0400>;
- clocks = <&ahb1_gates 24>;
- resets = <&ahb1_rst 24>;
+ clocks = <&ccu CLK_AHB1_OTG>;
+ resets = <&ccu RST_AHB1_OTG>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
phys = <&usbphy 0>;
@@ -561,7 +477,7 @@
status = "disabled";
};
- usbphy: phy@01c19400 {
+ usbphy: phy@1c19400 {
compatible = "allwinner,sun6i-a31-usb-phy";
reg = <0x01c19400 0x10>,
<0x01c1a800 0x4>,
@@ -569,15 +485,15 @@
reg-names = "phy_ctrl",
"pmu1",
"pmu2";
- clocks = <&usb_clk 8>,
- <&usb_clk 9>,
- <&usb_clk 10>;
+ clocks = <&ccu CLK_USB_PHY0>,
+ <&ccu CLK_USB_PHY1>,
+ <&ccu CLK_USB_PHY2>;
clock-names = "usb0_phy",
"usb1_phy",
"usb2_phy";
- resets = <&usb_clk 0>,
- <&usb_clk 1>,
- <&usb_clk 2>;
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>;
reset-names = "usb0_reset",
"usb1_reset",
"usb2_reset";
@@ -585,206 +501,202 @@
#phy-cells = <1>;
};
- ehci0: usb@01c1a000 {
+ ehci0: usb@1c1a000 {
compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
reg = <0x01c1a000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb1_gates 26>;
- resets = <&ahb1_rst 26>;
+ clocks = <&ccu CLK_AHB1_EHCI0>;
+ resets = <&ccu RST_AHB1_EHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
- ohci0: usb@01c1a400 {
+ ohci0: usb@1c1a400 {
compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
reg = <0x01c1a400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb1_gates 29>, <&usb_clk 16>;
- resets = <&ahb1_rst 29>;
+ clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>;
+ resets = <&ccu RST_AHB1_OHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
- ehci1: usb@01c1b000 {
+ ehci1: usb@1c1b000 {
compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb1_gates 27>;
- resets = <&ahb1_rst 27>;
+ clocks = <&ccu CLK_AHB1_EHCI1>;
+ resets = <&ccu RST_AHB1_EHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
- ohci1: usb@01c1b400 {
+ ohci1: usb@1c1b400 {
compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
reg = <0x01c1b400 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb1_gates 30>, <&usb_clk 17>;
- resets = <&ahb1_rst 30>;
+ clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>;
+ resets = <&ccu RST_AHB1_OHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
- ohci2: usb@01c1c400 {
+ ohci2: usb@1c1c400 {
compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb1_gates 31>, <&usb_clk 18>;
- resets = <&ahb1_rst 31>;
+ clocks = <&ccu CLK_AHB1_OHCI2>, <&ccu CLK_USB_OHCI2>;
+ resets = <&ccu RST_AHB1_OHCI2>;
status = "disabled";
};
- pio: pinctrl@01c20800 {
+ ccu: clock@1c20000 {
+ compatible = "allwinner,sun6i-a31-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pio: pinctrl@1c20800 {
compatible = "allwinner,sun6i-a31-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 5>;
+ clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
#gpio-cells = <3>;
- uart0_pins_a: uart0@0 {
- allwinner,pins = "PH20", "PH21";
- allwinner,function = "uart0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ gmac_pins_gmii_a: gmac_gmii@0 {
+ pins = "PA0", "PA1", "PA2", "PA3",
+ "PA4", "PA5", "PA6", "PA7",
+ "PA8", "PA9", "PA10", "PA11",
+ "PA12", "PA13", "PA14", "PA15",
+ "PA16", "PA17", "PA18", "PA19",
+ "PA20", "PA21", "PA22", "PA23",
+ "PA24", "PA25", "PA26", "PA27";
+ function = "gmac";
+ /*
+ * data lines in GMII mode run at 125MHz and
+ * might need a higher signal drive strength
+ */
+ drive-strength = <30>;
+ };
+
+ gmac_pins_mii_a: gmac_mii@0 {
+ pins = "PA0", "PA1", "PA2", "PA3",
+ "PA8", "PA9", "PA11",
+ "PA12", "PA13", "PA14", "PA19",
+ "PA20", "PA21", "PA22", "PA23",
+ "PA24", "PA26", "PA27";
+ function = "gmac";
+ };
+
+ gmac_pins_rgmii_a: gmac_rgmii@0 {
+ pins = "PA0", "PA1", "PA2", "PA3",
+ "PA9", "PA10", "PA11",
+ "PA12", "PA13", "PA14", "PA19",
+ "PA20", "PA25", "PA26", "PA27";
+ function = "gmac";
+ /*
+ * data lines in RGMII mode use DDR mode
+ * and need a higher signal drive strength
+ */
+ drive-strength = <40>;
};
i2c0_pins_a: i2c0@0 {
- allwinner,pins = "PH14", "PH15";
- allwinner,function = "i2c0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH14", "PH15";
+ function = "i2c0";
};
i2c1_pins_a: i2c1@0 {
- allwinner,pins = "PH16", "PH17";
- allwinner,function = "i2c1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH16", "PH17";
+ function = "i2c1";
};
i2c2_pins_a: i2c2@0 {
- allwinner,pins = "PH18", "PH19";
- allwinner,function = "i2c2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH18", "PH19";
+ function = "i2c2";
+ };
+
+ lcd0_rgb888_pins: lcd0_rgb888 {
+ pins = "PD0", "PD1", "PD2", "PD3",
+ "PD4", "PD5", "PD6", "PD7",
+ "PD8", "PD9", "PD10", "PD11",
+ "PD12", "PD13", "PD14", "PD15",
+ "PD16", "PD17", "PD18", "PD19",
+ "PD20", "PD21", "PD22", "PD23",
+ "PD24", "PD25", "PD26", "PD27";
+ function = "lcd0";
};
mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0", "PF1", "PF2",
+ pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
- allwinner,function = "mmc0";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ function = "mmc0";
+ drive-strength = <30>;
+ bias-pull-up;
};
mmc1_pins_a: mmc1@0 {
- allwinner,pins = "PG0", "PG1", "PG2", "PG3",
+ pins = "PG0", "PG1", "PG2", "PG3",
"PG4", "PG5";
- allwinner,function = "mmc1";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ function = "mmc1";
+ drive-strength = <30>;
+ bias-pull-up;
};
mmc2_pins_a: mmc2@0 {
- allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+ pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11";
- allwinner,function = "mmc2";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
};
mmc2_8bit_emmc_pins: mmc2@1 {
- allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+ pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11", "PC12",
"PC13", "PC14", "PC15",
"PC24";
- allwinner,function = "mmc2";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
};
mmc3_8bit_emmc_pins: mmc3@1 {
- allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+ pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11", "PC12",
"PC13", "PC14", "PC15",
"PC24";
- allwinner,function = "mmc3";
- allwinner,drive = <SUN4I_PINCTRL_40_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ function = "mmc3";
+ drive-strength = <40>;
+ bias-pull-up;
};
- gmac_pins_mii_a: gmac_mii@0 {
- allwinner,pins = "PA0", "PA1", "PA2", "PA3",
- "PA8", "PA9", "PA11",
- "PA12", "PA13", "PA14", "PA19",
- "PA20", "PA21", "PA22", "PA23",
- "PA24", "PA26", "PA27";
- allwinner,function = "gmac";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- gmac_pins_gmii_a: gmac_gmii@0 {
- allwinner,pins = "PA0", "PA1", "PA2", "PA3",
- "PA4", "PA5", "PA6", "PA7",
- "PA8", "PA9", "PA10", "PA11",
- "PA12", "PA13", "PA14", "PA15",
- "PA16", "PA17", "PA18", "PA19",
- "PA20", "PA21", "PA22", "PA23",
- "PA24", "PA25", "PA26", "PA27";
- allwinner,function = "gmac";
- /*
- * data lines in GMII mode run at 125MHz and
- * might need a higher signal drive strength
- */
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ spdif_pins_a: spdif@0 {
+ pins = "PH28";
+ function = "spdif";
};
- gmac_pins_rgmii_a: gmac_rgmii@0 {
- allwinner,pins = "PA0", "PA1", "PA2", "PA3",
- "PA9", "PA10", "PA11",
- "PA12", "PA13", "PA14", "PA19",
- "PA20", "PA25", "PA26", "PA27";
- allwinner,function = "gmac";
- /*
- * data lines in RGMII mode use DDR mode
- * and need a higher signal drive strength
- */
- allwinner,drive = <SUN4I_PINCTRL_40_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ uart0_pins_a: uart0@0 {
+ pins = "PH20", "PH21";
+ function = "uart0";
};
};
- ahb1_rst: reset@01c202c0 {
- #reset-cells = <1>;
- compatible = "allwinner,sun6i-a31-ahb1-reset";
- reg = <0x01c202c0 0xc>;
- };
-
- apb1_rst: reset@01c202d0 {
- #reset-cells = <1>;
- compatible = "allwinner,sun6i-a31-clock-reset";
- reg = <0x01c202d0 0x4>;
- };
-
- apb2_rst: reset@01c202d8 {
- #reset-cells = <1>;
- compatible = "allwinner,sun6i-a31-clock-reset";
- reg = <0x01c202d8 0x4>;
- };
-
- timer@01c20c00 {
+ timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -795,155 +707,194 @@
clocks = <&osc24M>;
};
- wdt1: watchdog@01c20ca0 {
+ wdt1: watchdog@1c20ca0 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
};
- lradc: lradc@01c22800 {
+ spdif: spdif@1c21000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun6i-a31-spdif";
+ reg = <0x01c21000 0x400>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB1_SPDIF>, <&ccu CLK_SPDIF>;
+ resets = <&ccu RST_APB1_SPDIF>;
+ clock-names = "apb", "spdif";
+ dmas = <&dma 2>, <&dma 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2s0: i2s@1c22000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun6i-a31-i2s";
+ reg = <0x01c22000 0x400>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB1_DAUDIO0>, <&ccu CLK_DAUDIO0>;
+ resets = <&ccu RST_APB1_DAUDIO0>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 3>, <&dma 3>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2s1: i2s@1c22400 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun6i-a31-i2s";
+ reg = <0x01c22400 0x400>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB1_DAUDIO1>, <&ccu CLK_DAUDIO1>;
+ resets = <&ccu RST_APB1_DAUDIO1>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 4>, <&dma 4>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ lradc: lradc@1c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- rtp: rtp@01c25000 {
+ rtp: rtp@1c25000 {
compatible = "allwinner,sun6i-a31-ts";
reg = <0x01c25000 0x100>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
#thermal-sensor-cells = <0>;
};
- uart0: serial@01c28000 {
+ uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb2_gates 16>;
- resets = <&apb2_rst 16>;
+ clocks = <&ccu CLK_APB2_UART0>;
+ resets = <&ccu RST_APB2_UART0>;
dmas = <&dma 6>, <&dma 6>;
dma-names = "rx", "tx";
status = "disabled";
};
- uart1: serial@01c28400 {
+ uart1: serial@1c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb2_gates 17>;
- resets = <&apb2_rst 17>;
+ clocks = <&ccu CLK_APB2_UART1>;
+ resets = <&ccu RST_APB2_UART1>;
dmas = <&dma 7>, <&dma 7>;
dma-names = "rx", "tx";
status = "disabled";
};
- uart2: serial@01c28800 {
+ uart2: serial@1c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb2_gates 18>;
- resets = <&apb2_rst 18>;
+ clocks = <&ccu CLK_APB2_UART2>;
+ resets = <&ccu RST_APB2_UART2>;
dmas = <&dma 8>, <&dma 8>;
dma-names = "rx", "tx";
status = "disabled";
};
- uart3: serial@01c28c00 {
+ uart3: serial@1c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb2_gates 19>;
- resets = <&apb2_rst 19>;
+ clocks = <&ccu CLK_APB2_UART3>;
+ resets = <&ccu RST_APB2_UART3>;
dmas = <&dma 9>, <&dma 9>;
dma-names = "rx", "tx";
status = "disabled";
};
- uart4: serial@01c29000 {
+ uart4: serial@1c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb2_gates 20>;
- resets = <&apb2_rst 20>;
+ clocks = <&ccu CLK_APB2_UART4>;
+ resets = <&ccu RST_APB2_UART4>;
dmas = <&dma 10>, <&dma 10>;
dma-names = "rx", "tx";
status = "disabled";
};
- uart5: serial@01c29400 {
+ uart5: serial@1c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb2_gates 21>;
- resets = <&apb2_rst 21>;
+ clocks = <&ccu CLK_APB2_UART5>;
+ resets = <&ccu RST_APB2_UART5>;
dmas = <&dma 22>, <&dma 22>;
dma-names = "rx", "tx";
status = "disabled";
};
- i2c0: i2c@01c2ac00 {
+ i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb2_gates 0>;
- resets = <&apb2_rst 0>;
+ clocks = <&ccu CLK_APB2_I2C0>;
+ resets = <&ccu RST_APB2_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- i2c1: i2c@01c2b000 {
+ i2c1: i2c@1c2b000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb2_gates 1>;
- resets = <&apb2_rst 1>;
+ clocks = <&ccu CLK_APB2_I2C1>;
+ resets = <&ccu RST_APB2_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- i2c2: i2c@01c2b400 {
+ i2c2: i2c@1c2b400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb2_gates 2>;
- resets = <&apb2_rst 2>;
+ clocks = <&ccu CLK_APB2_I2C2>;
+ resets = <&ccu RST_APB2_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- i2c3: i2c@01c2b800 {
+ i2c3: i2c@1c2b800 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b800 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb2_gates 3>;
- resets = <&apb2_rst 3>;
+ clocks = <&ccu CLK_APB2_I2C3>;
+ resets = <&ccu RST_APB2_I2C3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- gmac: ethernet@01c30000 {
+ gmac: ethernet@1c30000 {
compatible = "allwinner,sun7i-a20-gmac";
reg = <0x01c30000 0x1054>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
- clocks = <&ahb1_gates 17>, <&gmac_tx_clk>;
+ clocks = <&ccu CLK_AHB1_EMAC>, <&gmac_tx_clk>;
clock-names = "stmmaceth", "allwinner_gmac_tx";
- resets = <&ahb1_rst 17>;
+ resets = <&ccu RST_AHB1_EMAC>;
reset-names = "stmmaceth";
snps,pbl = <2>;
snps,fixed-burst;
@@ -953,17 +904,31 @@
#size-cells = <0>;
};
- crypto: crypto-engine@01c15000 {
- compatible = "allwinner,sun4i-a10-crypto";
+ crypto: crypto-engine@1c15000 {
+ compatible = "allwinner,sun6i-a31-crypto",
+ "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb1_gates 5>, <&ss_clk>;
+ clocks = <&ccu CLK_AHB1_SS>, <&ccu CLK_SS>;
clock-names = "ahb", "mod";
- resets = <&ahb1_rst 5>;
+ resets = <&ccu RST_AHB1_SS>;
reset-names = "ahb";
};
- timer@01c60000 {
+ codec: codec@1c22c00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun6i-a31-codec";
+ reg = <0x01c22c00 0x400>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB1_CODEC>, <&ccu CLK_CODEC>;
+ clock-names = "apb", "codec";
+ resets = <&ccu RST_APB1_CODEC>;
+ dmas = <&dma 15>, <&dma 15>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ timer@1c60000 {
compatible = "allwinner,sun6i-a31-hstimer",
"allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
@@ -971,62 +936,62 @@
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb1_gates 19>;
- resets = <&ahb1_rst 19>;
+ clocks = <&ccu CLK_AHB1_HSTIMER>;
+ resets = <&ccu RST_AHB1_HSTIMER>;
};
- spi0: spi@01c68000 {
+ spi0: spi@1c68000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c68000 0x1000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb1_gates 20>, <&spi0_clk>;
+ clocks = <&ccu CLK_AHB1_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
dmas = <&dma 23>, <&dma 23>;
dma-names = "rx", "tx";
- resets = <&ahb1_rst 20>;
+ resets = <&ccu RST_AHB1_SPI0>;
status = "disabled";
};
- spi1: spi@01c69000 {
+ spi1: spi@1c69000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c69000 0x1000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb1_gates 21>, <&spi1_clk>;
+ clocks = <&ccu CLK_AHB1_SPI1>, <&ccu CLK_SPI1>;
clock-names = "ahb", "mod";
dmas = <&dma 24>, <&dma 24>;
dma-names = "rx", "tx";
- resets = <&ahb1_rst 21>;
+ resets = <&ccu RST_AHB1_SPI1>;
status = "disabled";
};
- spi2: spi@01c6a000 {
+ spi2: spi@1c6a000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c6a000 0x1000>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb1_gates 22>, <&spi2_clk>;
+ clocks = <&ccu CLK_AHB1_SPI2>, <&ccu CLK_SPI2>;
clock-names = "ahb", "mod";
dmas = <&dma 25>, <&dma 25>;
dma-names = "rx", "tx";
- resets = <&ahb1_rst 22>;
+ resets = <&ccu RST_AHB1_SPI2>;
status = "disabled";
};
- spi3: spi@01c6b000 {
+ spi3: spi@1c6b000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c6b000 0x1000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb1_gates 23>, <&spi3_clk>;
+ clocks = <&ccu CLK_AHB1_SPI3>, <&ccu CLK_SPI3>;
clock-names = "ahb", "mod";
dmas = <&dma 26>, <&dma 26>;
dma-names = "rx", "tx";
- resets = <&ahb1_rst 23>;
+ resets = <&ccu RST_AHB1_SPI3>;
status = "disabled";
};
- gic: interrupt-controller@01c81000 {
+ gic: interrupt-controller@1c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
- <0x01c82000 0x1000>,
+ <0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
@@ -1034,30 +999,279 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
- rtc: rtc@01f00000 {
+ fe0: display-frontend@1e00000 {
+ compatible = "allwinner,sun6i-a31-display-frontend";
+ reg = <0x01e00000 0x20000>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB1_FE0>, <&ccu CLK_FE0>,
+ <&ccu CLK_DRAM_FE0>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_AHB1_FE0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fe0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ fe0_out_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_in_fe0>;
+ };
+
+ fe0_out_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_in_fe0>;
+ };
+ };
+ };
+ };
+
+ fe1: display-frontend@1e20000 {
+ compatible = "allwinner,sun6i-a31-display-frontend";
+ reg = <0x01e20000 0x20000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB1_FE1>, <&ccu CLK_FE1>,
+ <&ccu CLK_DRAM_FE1>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_AHB1_FE1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fe1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ fe1_out_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_in_fe1>;
+ };
+
+ fe1_out_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_in_fe1>;
+ };
+ };
+ };
+ };
+
+ be1: display-backend@1e40000 {
+ compatible = "allwinner,sun6i-a31-display-backend";
+ reg = <0x01e40000 0x10000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB1_BE1>, <&ccu CLK_BE1>,
+ <&ccu CLK_DRAM_BE1>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_AHB1_BE1>;
+
+ assigned-clocks = <&ccu CLK_BE1>;
+ assigned-clock-rates = <300000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ be1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ be1_in_fe0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&fe0_out_be1>;
+ };
+
+ be1_in_fe1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&fe1_out_be1>;
+ };
+ };
+
+ be1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ be1_out_drc1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&drc1_in_be1>;
+ };
+ };
+ };
+ };
+
+ drc1: drc@1e50000 {
+ compatible = "allwinner,sun6i-a31-drc";
+ reg = <0x01e50000 0x10000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB1_DRC1>, <&ccu CLK_IEP_DRC1>,
+ <&ccu CLK_DRAM_DRC1>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_AHB1_DRC1>;
+
+ assigned-clocks = <&ccu CLK_IEP_DRC1>;
+ assigned-clock-rates = <300000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ drc1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ drc1_in_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_out_drc1>;
+ };
+ };
+
+ drc1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ drc1_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_drc1>;
+ };
+
+ drc1_out_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_in_drc1>;
+ };
+ };
+ };
+ };
+
+ be0: display-backend@1e60000 {
+ compatible = "allwinner,sun6i-a31-display-backend";
+ reg = <0x01e60000 0x10000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_BE0>,
+ <&ccu CLK_DRAM_BE0>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_AHB1_BE0>;
+
+ assigned-clocks = <&ccu CLK_BE0>;
+ assigned-clock-rates = <300000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ be0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ be0_in_fe0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&fe0_out_be0>;
+ };
+
+ be0_in_fe1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&fe1_out_be0>;
+ };
+ };
+
+ be0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ be0_out_drc0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&drc0_in_be0>;
+ };
+ };
+ };
+ };
+
+ drc0: drc@1e70000 {
+ compatible = "allwinner,sun6i-a31-drc";
+ reg = <0x01e70000 0x10000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>,
+ <&ccu CLK_DRAM_DRC0>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_AHB1_DRC0>;
+
+ assigned-clocks = <&ccu CLK_IEP_DRC0>;
+ assigned-clock-rates = <300000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ drc0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ drc0_in_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_out_drc0>;
+ };
+ };
+
+ drc0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ drc0_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_drc0>;
+ };
+
+ drc0_out_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_in_drc0>;
+ };
+ };
+ };
+ };
+
+ rtc: rtc@1f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
- nmi_intc: interrupt-controller@01f00c0c {
- compatible = "allwinner,sun6i-a31-sc-nmi";
+ nmi_intc: interrupt-controller@1f00c00 {
+ compatible = "allwinner,sun6i-a31-r-intc";
interrupt-controller;
#interrupt-cells = <2>;
- reg = <0x01f00c0c 0x38>;
+ reg = <0x01f00c00 0x400>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
- prcm@01f01400 {
+ prcm@1f01400 {
compatible = "allwinner,sun6i-a31-prcm";
reg = <0x01f01400 0x200>;
ar100: ar100_clk {
compatible = "allwinner,sun6i-a31-ar100-clk";
#clock-cells = <0>;
- clocks = <&osc32k>, <&osc24M>, <&pll6 0>,
- <&pll6 0>;
+ clocks = <&osc32k>, <&osc24M>,
+ <&ccu CLK_PLL_PERIPH>,
+ <&ccu CLK_PLL_PERIPH>;
clock-output-names = "ar100";
};
@@ -1100,12 +1314,12 @@
};
};
- cpucfg@01f01c00 {
+ cpucfg@1f01c00 {
compatible = "allwinner,sun6i-a31-cpuconfig";
reg = <0x01f01c00 0x300>;
};
- ir: ir@01f02000 {
+ ir: ir@1f02000 {
compatible = "allwinner,sun5i-a13-ir";
clocks = <&apb0_gates 1>, <&ir_clk>;
clock-names = "apb", "ir";
@@ -1115,12 +1329,13 @@
status = "disabled";
};
- r_pio: pinctrl@01f02c00 {
+ r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun6i-a31-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 0>;
+ clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
resets = <&apb0_rst 0>;
gpio-controller;
interrupt-controller;
@@ -1129,21 +1344,17 @@
#gpio-cells = <3>;
ir_pins_a: ir@0 {
- allwinner,pins = "PL4";
- allwinner,function = "s_ir";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL4";
+ function = "s_ir";
};
p2wi_pins: p2wi {
- allwinner,pins = "PL0", "PL1";
- allwinner,function = "s_p2wi";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL0", "PL1";
+ function = "s_p2wi";
};
};
- p2wi: i2c@01f03400 {
+ p2wi: i2c@1f03400 {
compatible = "allwinner,sun6i-a31-p2wi";
reg = <0x01f03400 0x400>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/dts/sun6i-a31s-cs908.dts b/arch/arm/dts/sun6i-a31s-cs908.dts
index 5e8f8c4f2b..75e578159c 100644
--- a/arch/arm/dts/sun6i-a31s-cs908.dts
+++ b/arch/arm/dts/sun6i-a31s-cs908.dts
@@ -43,8 +43,6 @@
/dts-v1/;
#include "sun6i-a31s.dtsi"
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
/ {
model = "CSQ CS908 top set box";
compatible = "csq,cs908", "allwinner,sun6i-a31s";
diff --git a/arch/arm/dts/sun6i-a31s-primo81.dts b/arch/arm/dts/sun6i-a31s-primo81.dts
index 73c133f5e7..4cb9664cdb 100644
--- a/arch/arm/dts/sun6i-a31s-primo81.dts
+++ b/arch/arm/dts/sun6i-a31s-primo81.dts
@@ -48,22 +48,46 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "MSI Primo81 tablet";
compatible = "msi,primo81", "allwinner,sun6i-a31s";
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "c";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
};
&cpu0 {
cpu-supply = <&reg_dcdc3>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
/* rtl8188etv wifi is connected here */
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
/* pull-ups and device VDDIO use AXP221 DLDO3 */
pinctrl-names = "default";
@@ -127,31 +151,26 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
- cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
- cd-inverted;
+ cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
status = "okay";
};
&pio {
gt911_int_primo81: gt911_int_pin@0 {
- allwinner,pins = "PA3";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA3";
+ function = "gpio_in";
};
mma8452_int_primo81: mma8452_int_pin@0 {
- allwinner,pins = "PA9";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA9";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc0_cd_pin_primo81: mmc0_cd_pin@0 {
- allwinner,pins = "PA8";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA8";
+ function = "gpio_in";
+ bias-pull-up;
};
};
@@ -163,11 +182,16 @@
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ x-powers,drive-vbus-en;
};
};
#include "axp22x.dtsi"
+&battery_power_supply {
+ status = "okay";
+};
+
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <2700000>;
@@ -231,6 +255,11 @@
regulator-name = "vddio-csi";
};
+&reg_drivevbus {
+ regulator-name = "usb0-vbus";
+ status = "okay";
+};
+
&reg_eldo3 {
regulator-min-microvolt = <1080000>;
regulator-max-microvolt = <1320000>;
@@ -243,12 +272,18 @@
};
&usb_otg {
- /* otg support requires support for AXP221 usb-power-supply and GPIO */
- dr_mode = "host";
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
status = "okay";
};
&usbphy {
+ usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <&reg_drivevbus>;
usb1_vbus-supply = <&reg_dldo1>;
status = "okay";
};
diff --git a/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi
index 4ec0c8679b..d7325bc4ee 100644
--- a/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi
+++ b/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi
@@ -45,7 +45,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Sinlinx SinA31s Core Board";
diff --git a/arch/arm/dts/sun6i-a31s-sina31s.dts b/arch/arm/dts/sun6i-a31s-sina31s.dts
index 6ead2f5c84..da0ccf5a2c 100644
--- a/arch/arm/dts/sun6i-a31s-sina31s.dts
+++ b/arch/arm/dts/sun6i-a31s-sina31s.dts
@@ -53,6 +53,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -63,6 +74,35 @@
gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
};
};
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "On-board SPDIF";
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ };
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT",
+ "MIC1", "Mic",
+ "Mic", "MBIAS";
+ status = "okay";
+};
+
+&de {
+ status = "okay";
};
&ehci0 {
@@ -87,6 +127,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
@@ -117,8 +167,7 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
- cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
- cd-inverted;
+ cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
status = "okay";
};
@@ -128,17 +177,14 @@
&pio {
led_pin_sina31s: led_pin@0 {
- allwinner,pins = "PH13";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH13";
+ function = "gpio_out";
};
mmc0_cd_pin_sina31s: mmc0_cd_pin@0 {
- allwinner,pins = "PA4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA4";
+ function = "gpio_in";
+ bias-pull-up;
};
};
@@ -148,6 +194,17 @@
regulator-name = "vcc-gmac-phy";
};
+&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_pins_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
&usbphy {
status = "okay";
};
diff --git a/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts
index db7fa13f54..b8b79c0e9e 100644
--- a/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -42,7 +42,6 @@
/dts-v1/;
#include "sun6i-a31s.dtsi"
-#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
@@ -86,6 +85,10 @@
};
};
+&cpu0 {
+ cpu-supply = <&reg_dcdc3>;
+};
+
&ehci0 {
status = "okay";
};
@@ -95,6 +98,7 @@
pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>;
phy = <&phy1>;
phy-mode = "rgmii";
+ phy-supply = <&reg_dldo1>;
snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
snps,reset-active-low;
snps,reset-delays-us = <0 10000 30000>;
@@ -114,27 +118,26 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>;
- vmmc-supply = <&reg_vcc3v0>;
+ vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
- cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
- cd-inverted;
+ cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
status = "okay";
};
&mmc0_pins_a {
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_a>;
- vmmc-supply = <&reg_vcc3v0>;
+ vmmc-supply = <&reg_aldo1>;
mmc-pwrseq = <&mmc2_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
- brcmf: bcrmf@1 {
+ brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&r_pio>;
@@ -144,45 +147,148 @@
};
&mmc2_pins_a {
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&ohci0 {
status = "okay";
};
+&p2wi {
+ status = "okay";
+
+ axp22x: pmic@68 {
+ compatible = "x-powers,axp221";
+ reg = <0x68>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ eldoin-supply = <&reg_dcdc1>;
+ x-powers,drive-vbus-en;
+ };
+};
+
&pio {
gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
- allwinner,pins = "PA21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA21";
+ function = "gpio_out";
};
led_pins_bpi_m2: led_pins@0 {
- allwinner,pins = "PG5", "PG10", "PG11";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG5", "PG10", "PG11";
+ function = "gpio_out";
};
mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 {
- allwinner,pins = "PA4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA4";
+ function = "gpio_in";
+ bias-pull-up;
};
};
&r_pio {
mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 {
- allwinner,pins = "PL8";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PL8";
+ function = "gpio_out";
};
};
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+&reg_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-name = "vcc-gmac";
+};
+
+&reg_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vdd-3v0";
+};
+
+&reg_dcdc2 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-mac";
+};
+
+&reg_dldo2 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "avdd-csi";
+};
+
+&reg_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pb";
+};
+
+&reg_eldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vdd-csi";
+ status = "okay";
+};
+
+&reg_ldo_io1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pm-cpus";
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
index d6ad6196a7..aab6c1720e 100644
--- a/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
+++ b/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
@@ -45,7 +45,6 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Yones TopTech BS1078 v2 Tablet";
@@ -92,10 +91,9 @@
&pio {
mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 {
- allwinner,pins = "PA8";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA8";
+ function = "gpio_in";
+ bias-pull-up;
};
};
@@ -104,13 +102,12 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>;
vmmc-supply = <&reg_vcc3v0>;
bus-width = <4>;
- cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
- cd-inverted;
+ cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
status = "okay";
};
&mmc0_pins_a {
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&p2wi {
diff --git a/arch/arm/dts/sun6i-a31s.dtsi b/arch/arm/dts/sun6i-a31s.dtsi
index c17a32771b..97e2c51d0a 100644
--- a/arch/arm/dts/sun6i-a31s.dtsi
+++ b/arch/arm/dts/sun6i-a31s.dtsi
@@ -48,6 +48,14 @@
#include "sun6i-a31.dtsi"
+&de {
+ compatible = "allwinner,sun6i-a31s-display-engine";
+};
+
&pio {
compatible = "allwinner,sun6i-a31s-pinctrl";
};
+
+&tcon0 {
+ compatible = "allwinner,sun6i-a31s-tcon";
+};
diff --git a/arch/arm/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/dts/sun6i-reference-design-tablet.dtsi
index 0c434304e0..4e72e4f3ef 100644
--- a/arch/arm/dts/sun6i-reference-design-tablet.dtsi
+++ b/arch/arm/dts/sun6i-reference-design-tablet.dtsi
@@ -44,7 +44,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
aliases {
@@ -70,24 +69,21 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
- cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
- cd-inverted;
+ cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
status = "okay";
};
&pio {
mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
- allwinner,pins = "PA8";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA8";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PA15";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA15";
+ function = "gpio_in";
+ bias-pull-up;
};
};
generated by cgit (git 2.34.1) at 2024-12-23 11:38:39 +0000