1 files changed, 0 insertions, 150 deletions
diff --git a/arch/arm/include/asm/arch-at91/at91_pio.h b/arch/arm/include/asm/arch-at91/at91_pio.h
deleted file mode 100644
index 301227880a..0000000000
--- a/arch/arm/include/asm/arch-at91/at91_pio.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * [origin: Linux kernel include/asm-arm/arch-at91/at91_pio.h]
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- * Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de)
- *
- * Parallel I/O Controller (PIO) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef AT91_PIO_H
-#define AT91_PIO_H
-
-
-#define AT91_ASM_PIO_RANGE	0x200
-#define AT91_ASM_PIOC_ASR	\
-	(ATMEL_BASE_PIO + AT91_PIO_PORTC * AT91_ASM_PIO_RANGE + 0x70)
-#define AT91_ASM_PIOC_BSR	\
-	(ATMEL_BASE_PIO + AT91_PIO_PORTC * AT91_ASM_PIO_RANGE + 0x74)
-#define AT91_ASM_PIOC_PDR	\
-	(ATMEL_BASE_PIO + AT91_PIO_PORTC * AT91_ASM_PIO_RANGE + 0x04)
-#define AT91_ASM_PIOC_PUDR	\
-	(ATMEL_BASE_PIO + AT91_PIO_PORTC * AT91_ASM_PIO_RANGE + 0x60)
-
-#define AT91_ASM_PIOD_PDR	\
-	(ATMEL_BASE_PIO + AT91_PIO_PORTD * AT91_ASM_PIO_RANGE + 0x04)
-#define AT91_ASM_PIOD_PUDR	\
-	(ATMEL_BASE_PIO + AT91_PIO_PORTD * AT91_ASM_PIO_RANGE + 0x60)
-#define AT91_ASM_PIOD_ASR	\
-	(ATMEL_BASE_PIO + AT91_PIO_PORTD * AT91_ASM_PIO_RANGE + 0x70)
-
-#ifndef __ASSEMBLY__
-
-typedef struct at91_port {
-	u32	per;		/* 0x00 PIO Enable Register */
-	u32	pdr;		/* 0x04 PIO Disable Register */
-	u32	psr;		/* 0x08 PIO Status Register */
-	u32	reserved0;
-	u32	oer;		/* 0x10 Output Enable Register */
-	u32	odr;		/* 0x14 Output Disable Registerr */
-	u32	osr;		/* 0x18 Output Status Register */
-	u32	reserved1;
-	u32	ifer;		/* 0x20 Input Filter Enable Register */
-	u32	ifdr;		/* 0x24 Input Filter Disable Register */
-	u32	ifsr;		/* 0x28 Input Filter Status Register */
-	u32	reserved2;
-	u32	sodr;		/* 0x30 Set Output Data Register */
-	u32	codr;		/* 0x34 Clear Output Data Register */
-	u32	odsr;		/* 0x38 Output Data Status Register */
-	u32	pdsr;		/* 0x3C Pin Data Status Register */
-	u32	ier;		/* 0x40 Interrupt Enable Register */
-	u32	idr;		/* 0x44 Interrupt Disable Register */
-	u32	imr;		/* 0x48 Interrupt Mask Register */
-	u32	isr;		/* 0x4C Interrupt Status Register */
-	u32	mder;		/* 0x50 Multi-driver Enable Register */
-	u32	mddr;		/* 0x54 Multi-driver Disable Register */
-	u32	mdsr;		/* 0x58 Multi-driver Status Register */
-	u32	reserved3;
-	u32	pudr;		/* 0x60 Pull-up Disable Register */
-	u32	puer;		/* 0x64 Pull-up Enable Register */
-	u32	pusr;		/* 0x68 Pad Pull-up Status Register */
-	u32	reserved4;
-#if defined(CPU_HAS_PIO3)
-	u32	abcdsr1;	/* 0x70 Peripheral ABCD Select Register 1 */
-	u32	abcdsr2;	/* 0x74 Peripheral ABCD Select Register 2 */
-	u32	reserved5[2];
-	u32	ifscdr;		/* 0x80 Input Filter SCLK Disable Register */
-	u32	ifscer;		/* 0x84 Input Filter SCLK Enable Register */
-	u32	ifscsr;		/* 0x88 Input Filter SCLK Status Register */
-	u32	scdr;		/* 0x8C SCLK Divider Debouncing Register */
-	u32	ppddr;		/* 0x90 Pad Pull-down Disable Register */
-	u32	ppder;		/* 0x94 Pad Pull-down Enable Register */
-	u32	ppdsr;		/* 0x98 Pad Pull-down Status Register */
-	u32	reserved6;	/*  */
-#else
-	u32	asr;		/* 0x70 Select A Register */
-	u32	bsr;		/* 0x74 Select B Register */
-	u32	absr;		/* 0x78 AB Select Status Register */
-	u32	reserved5[9];	/*  */
-#endif
-	u32	ower;		/* 0xA0 Output Write Enable Register */
-	u32	owdr;		/* 0xA4 Output Write Disable Register */
-	u32	owsr;		/* OxA8 Output Write Status Register */
-#if defined(CPU_HAS_PIO3)
-	u32	reserved7;	/*  */
-	u32	aimer;		/* 0xB0 Additional INT Modes Enable Register */
-	u32	aimdr;		/* 0xB4 Additional INT Modes Disable Register */
-	u32	aimmr;		/* 0xB8 Additional INT Modes Mask Register */
-	u32	reserved8;	/* */
-	u32	esr;		/* 0xC0 Edge Select Register */
-	u32	lsr;		/* 0xC4 Level Select Register */
-	u32	elsr;		/* 0xC8 Edge/Level Status Register */
-	u32	reserved9;	/* 0xCC */
-	u32	fellsr;		/* 0xD0 Falling /Low Level Select Register */
-	u32	rehlsr;		/* 0xD4 Rising /High Level Select Register */
-	u32	frlhsr;		/* 0xD8 Fall/Rise - Low/High Status Register */
-	u32	reserved10;	/* */
-	u32	locksr;		/* 0xE0 Lock Status */
-	u32	wpmr;		/* 0xE4 Write Protect Mode Register */
-	u32	wpsr;		/* 0xE8 Write Protect Status Register */
-	u32	reserved11[5];	/* */
-	u32	schmitt;	/* 0x100 Schmitt Trigger Register */
-	u32	reserved12[63];
-#else
-	u32	reserved6[85];
-#endif
-} at91_port_t;
-
-typedef union at91_pio {
-	struct {
-		at91_port_t	pioa;
-		at91_port_t	piob;
-		at91_port_t	pioc;
-		at91_port_t	piod;	/* not present in all hardware */
-		at91_port_t	pioe;/* not present in all hardware */
-	};
-	at91_port_t port[5];
-} at91_pio_t;
-
-#ifdef CONFIG_AT91_GPIO
-int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup);
-int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup);
-#if defined(CPU_HAS_PIO3)
-int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup);
-int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup);
-int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div);
-int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on);
-int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin);
-#endif
-int at91_set_pio_input(unsigned port, unsigned pin, int use_pullup);
-int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on);
-int at91_set_pio_output(unsigned port, unsigned pin, int value);
-int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup);
-int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup);
-int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on);
-int at91_set_pio_value(unsigned port, unsigned pin, int value);
-int at91_get_pio_value(unsigned port, unsigned pin);
-#endif
-#endif
-
-#define	AT91_PIO_PORTA		0x0
-#define	AT91_PIO_PORTB		0x1
-#define	AT91_PIO_PORTC		0x2
-#define	AT91_PIO_PORTD		0x3
-#define	AT91_PIO_PORTE		0x4
-
-#endif