diff options
Diffstat (limited to 'arch/arm/include/asm/arch-u8500/hardware.h')
| -rw-r--r-- | arch/arm/include/asm/arch-u8500/hardware.h | 94 |
1 files changed, 0 insertions, 94 deletions
diff --git a/arch/arm/include/asm/arch-u8500/hardware.h b/arch/arm/include/asm/arch-u8500/hardware.h deleted file mode 100644 index e6a899dac1..0000000000 --- a/arch/arm/include/asm/arch-u8500/hardware.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* Peripheral clusters */ - -#define U8500_PER3_BASE 0x80000000 -#define U8500_PER2_BASE 0x80110000 -#define U8500_PER1_BASE 0x80120000 -#define U8500_PER4_BASE 0x80150000 - -#define U8500_PER6_BASE 0xa03c0000 -#define U8500_PER7_BASE 0xa03d0000 -#define U8500_PER5_BASE 0xa03e0000 - -/* GPIO */ - -#define U8500_GPIO0_BASE (U8500_PER1_BASE + 0xE000) -#define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xE000 + 0x80) - -#define U8500_GPIO2_BASE (U8500_PER3_BASE + 0xE000) -#define U8500_GPIO3_BASE (U8500_PER3_BASE + 0xE000 + 0x80) -#define U8500_GPIO4_BASE (U8500_PER3_BASE + 0xE000 + 0x100) -#define U8500_GPIO5_BASE (U8500_PER3_BASE + 0xE000 + 0x180) - -#define U8500_GPIO6_BASE (U8500_PER2_BASE + 0xE000) -#define U8500_GPIO7_BASE (U8500_PER2_BASE + 0xE000 + 0x80) - -#define U8500_GPIO8_BASE (U8500_PER5_BASE + 0x1E000) - -/* Per7 */ -#define U8500_CLKRST7_BASE (U8500_PER7_BASE + 0xf000) - -/* Per6 */ -#define U8500_MTU0_BASE_V1 (U8500_PER6_BASE + 0x6000) -#define U8500_MTU1_BASE_V1 (U8500_PER6_BASE + 0x7000) -#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) - -/* Per5 */ -#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) - -/* Per4 */ -#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) -#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) - -/* Per3 */ -#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) -#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) - -/* Per2 */ -#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000) - -/* Per1 */ -#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) -#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) -#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) - -/* Last page of Boot ROM */ -#define U8500_BOOTROM_BASE 0x90000000 -#define U8500_ASIC_ID_LOC_ED_V1 (U8500_BOOTROM_BASE + 0x1FFF4) -#define U8500_ASIC_ID_LOC_V2 (U8500_BOOTROM_BASE + 0x1DBF4) - -/* AB8500 specifics */ - -/* address bank */ -#define AB8500_REGU_CTRL2 0x0004 -#define AB8500_MISC 0x0010 - -/* registers */ -#define AB8500_REGU_VRF1VAUX3_REGU_REG 0x040A -#define AB8500_REGU_VRF1VAUX3_SEL_REG 0x0421 -#define AB8500_REV_REG 0x1080 - -#define AB8500_GPIO_SEL2_REG 0x1001 -#define AB8500_GPIO_DIR2_REG 0x1011 -#define AB8500_GPIO_DIR4_REG 0x1013 -#define AB8500_GPIO_SEL4_REG 0x1003 -#define AB8500_GPIO_OUT2_REG 0x1021 -#define AB8500_GPIO_OUT4_REG 0x1023 - -#define LDO_VAUX3_ENABLE_MASK 0x3 -#define LDO_VAUX3_ENABLE_VAL 0x1 -#define LDO_VAUX3_SEL_MASK 0xf -#define LDO_VAUX3_SEL_2V9 0xd -#define LDO_VAUX3_V2_SEL_MASK 0x7 -#define LDO_VAUX3_V2_SEL_2V91 0x7 - - -#endif /* __ASM_ARCH_HARDWARE_H */ |