diff options
Diffstat (limited to 'arch/arm/include')
22 files changed, 209 insertions, 1073 deletions
diff --git a/arch/arm/include/asm/arch-davinci/pinmux_defs.h b/arch/arm/include/asm/arch-davinci/pinmux_defs.h index a851f1f50f..beaf0d601a 100644 --- a/arch/arm/include/asm/arch-davinci/pinmux_defs.h +++ b/arch/arm/include/asm/arch-davinci/pinmux_defs.h @@ -22,8 +22,14 @@ #define __ASM_ARCH_PINMUX_DEFS_H #include <asm/arch/davinci_misc.h> +#include <config.h> -/* SPI pin muxer settings */ +/* SPI0 pin muxer settings */ +extern const struct pinmux_config spi0_pins_base[3]; +extern const struct pinmux_config spi0_pins_scs0[1]; +extern const struct pinmux_config spi0_pins_ena[1]; + +/* SPI1 pin muxer settings */ extern const struct pinmux_config spi1_pins_base[3]; extern const struct pinmux_config spi1_pins_scs0[1]; @@ -35,6 +41,7 @@ extern const struct pinmux_config uart2_pins_rtscts[2]; /* EMAC pin muxer settings*/ extern const struct pinmux_config emac_pins_rmii[7]; +extern const struct pinmux_config emac_pins_rmii_clk_source[1]; extern const struct pinmux_config emac_pins_mii[15]; extern const struct pinmux_config emac_pins_mdio[2]; @@ -43,13 +50,19 @@ extern const struct pinmux_config i2c0_pins[2]; extern const struct pinmux_config i2c1_pins[2]; /* EMIFA pin muxer settings */ +extern const struct pinmux_config emifa_pins[40]; +extern const struct pinmux_config emifa_pins_cs0[1]; extern const struct pinmux_config emifa_pins_cs2[1]; extern const struct pinmux_config emifa_pins_cs3[1]; extern const struct pinmux_config emifa_pins_cs4[1]; extern const struct pinmux_config emifa_pins_nand[12]; extern const struct pinmux_config emifa_pins_nor[43]; +/* USB pin mux setting */ +extern const struct pinmux_config usb_pins[1]; + /* MMC pin muxer settings */ +extern const struct pinmux_config mmc0_pins_8bit[10]; extern const struct pinmux_config mmc0_pins[6]; #endif diff --git a/arch/arm/include/asm/arch-omap24xx/bits.h b/arch/arm/include/asm/arch-omap24xx/bits.h deleted file mode 100644 index 8522335bfc..0000000000 --- a/arch/arm/include/asm/arch-omap24xx/bits.h +++ /dev/null @@ -1,48 +0,0 @@ -/* bits.h - * Copyright (c) 2004 Texas Instruments - * - * This package is free software; you can redistribute it and/or - * modify it under the terms of the license found in the file - * named COPYING that should have accompanied this file. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ -#ifndef __bits_h -#define __bits_h 1 - -#define BIT0 (1<<0) -#define BIT1 (1<<1) -#define BIT2 (1<<2) -#define BIT3 (1<<3) -#define BIT4 (1<<4) -#define BIT5 (1<<5) -#define BIT6 (1<<6) -#define BIT7 (1<<7) -#define BIT8 (1<<8) -#define BIT9 (1<<9) -#define BIT10 (1<<10) -#define BIT11 (1<<11) -#define BIT12 (1<<12) -#define BIT13 (1<<13) -#define BIT14 (1<<14) -#define BIT15 (1<<15) -#define BIT16 (1<<16) -#define BIT17 (1<<17) -#define BIT18 (1<<18) -#define BIT19 (1<<19) -#define BIT20 (1<<20) -#define BIT21 (1<<21) -#define BIT22 (1<<22) -#define BIT23 (1<<23) -#define BIT24 (1<<24) -#define BIT25 (1<<25) -#define BIT26 (1<<26) -#define BIT27 (1<<27) -#define BIT28 (1<<28) -#define BIT29 (1<<29) -#define BIT30 (1<<30) -#define BIT31 (1<<31) - -#endif diff --git a/arch/arm/include/asm/arch-omap24xx/clocks.h b/arch/arm/include/asm/arch-omap24xx/clocks.h deleted file mode 100644 index 2e92569a9c..0000000000 --- a/arch/arm/include/asm/arch-omap24xx/clocks.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _OMAP24XX_CLOCKS_H_ -#define _OMAP24XX_CLOCKS_H_ - -#define COMMIT_DIVIDERS 0x1 - -#define MODE_BYPASS_FAST 0x2 -#define APLL_LOCK 0xc -#ifdef CONFIG_APTIX -#define DPLL_LOCK 0x1 /* stay in bypass mode */ -#else -#define DPLL_LOCK 0x3 /* DPLL lock */ -#endif - -/****************************************************************************; -; PRCM Scheme II -; -; Enable clocks and DPLL for: -; DPLL=300, DPLLout=600 M=1,N=50 CM_CLKSEL1_PLL[21:8] 12/2*50 -; Core=600 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0] -; MPUF=300 (mpu domain) 2 CM_CLKSEL_MPU[4:0] -; DSPF=200 (dsp domain) 3 CM_CLKSEL_DSP[4:0] -; DSPI=100 6 CM_CLKSEL_DSP[6:5] -; DSP_S bypass CM_CLKSEL_DSP[7] -; IVAF=200 (dsp domain) 3 CM_CLKSEL_DSP[12:8] -; IVAF=100 auto -; IVAI auto -; IVA_MPU auto -; IVA_S bypass CM_CLKSEL_DSP[13] -; GFXF=50 (gfx domain) 12 CM_CLKSEL_FGX[2:0] -; SSI_SSRF=200 3 CM_CLKSEL1_CORE[24:20] -; SSI_SSTF=100 auto -; L3=100Mhz (sdram) 6 CM_CLKSEL1_CORE[4:0] -; L4=100Mhz 6 -; C_L4_USB=50 12 CM_CLKSEL1_CORE[6:5] -***************************************************************************/ -#define II_DPLL_OUT_X2 0x2 /* x2 core out */ -#define II_MPU_DIV 0x2 /* mpu = core/2 */ -#define II_DSP_DIV 0x343 /* dsp & iva divider */ -#define II_GFX_DIV 0x2 -#define II_BUS_DIV 0x04601026 -#define II_DPLL_300 0x01832100 - -/****************************************************************************; -; PRCM Scheme III -; -; Enable clocks and DPLL for: -; DPLL=266, DPLLout=532 M=5+1,N=133 CM_CLKSEL1_PLL[21:8] 12/6*133=266 -; Core=532 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0] -; MPUF=266 (mpu domain) /2 CM_CLKSEL_MPU[4:0] -; DSPF=177.3 (dsp domain) /3 CM_CLKSEL_DSP[4:0] -; DSPI=88.67 /6 CM_CLKSEL_DSP[6:5] -; DSP_S ACTIVATED CM_CLKSEL_DSP[7] -; IVAF=88.67 (dsp domain) /3 CM_CLKSEL_DSP[12:8] -; IVAF=88.67 auto -; IVAI auto -; IVA_MPU auto -; IVA_S ACTIVATED CM_CLKSEL_DSP[13] -; GFXF=66.5 (gfx domain) /8 CM_CLKSEL_FGX[2:0]: -; SSI_SSRF=177.3 /3 CM_CLKSEL1_CORE[24:20] -; SSI_SSTF=88.67 auto -; L3=133Mhz (sdram) /4 CM_CLKSEL1_CORE[4:0] -; L4=66.5Mhz /8 -; C_L4_USB=33.25 /16 CM_CLKSEL1_CORE[6:5] -***************************************************************************/ -#define III_DPLL_OUT_X2 0x2 /* x2 core out */ -#define III_MPU_DIV 0x2 /* mpu = core/2 */ -#define III_DSP_DIV 0x23C3 /* dsp & iva divider sych enabled*/ -#define III_GFX_DIV 0x2 -#define III_BUS_DIV 0x08301044 -#define III_DPLL_266 0x01885500 - -/* set defaults for boot up */ -#ifdef PRCM_CONFIG_II -# define DPLL_OUT II_DPLL_OUT_X2 -# define MPU_DIV II_MPU_DIV -# define DSP_DIV II_DSP_DIV -# define GFX_DIV II_GFX_DIV -# define BUS_DIV II_BUS_DIV -# define DPLL_VAL II_DPLL_300 -#elif PRCM_CONFIG_III -# define DPLL_OUT III_DPLL_OUT_X2 -# define MPU_DIV III_MPU_DIV -# define DSP_DIV III_DSP_DIV -# define GFX_DIV III_GFX_DIV -# define BUS_DIV III_BUS_DIV -# define DPLL_VAL III_DPLL_266 -#endif - -/* lock delay time out */ -#define LDELAY 12000000 - -#endif diff --git a/arch/arm/include/asm/arch-omap24xx/i2c.h b/arch/arm/include/asm/arch-omap24xx/i2c.h deleted file mode 100644 index 6f645192a7..0000000000 --- a/arch/arm/include/asm/arch-omap24xx/i2c.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _OMAP24XX_I2C_H_ -#define _OMAP24XX_I2C_H_ - -#define I2C_BASE1 0x48070000 -#define I2C_BASE2 0x48072000 /* nothing hooked up on h4 */ - -#define I2C_DEFAULT_BASE I2C_BASE1 - -struct i2c { - unsigned short rev; /* 0x00 */ - unsigned short res1; - unsigned short ie; /* 0x04 */ - unsigned short res2; - unsigned short stat; /* 0x08 */ - unsigned short res3; - unsigned short iv; /* 0x0C */ - unsigned short res4; - unsigned short syss; /* 0x10 */ - unsigned short res4p1; - unsigned short buf; /* 0x14 */ - unsigned short res5; - unsigned short cnt; /* 0x18 */ - unsigned short res6; - unsigned short data; /* 0x1C */ - unsigned short res7; - unsigned short sysc; /* 0x20 */ - unsigned short res8; - unsigned short con; /* 0x24 */ - unsigned short res9; - unsigned short oa; /* 0x28 */ - unsigned short res10; - unsigned short sa; /* 0x2C */ - unsigned short res11; - unsigned short psc; /* 0x30 */ - unsigned short res12; - unsigned short scll; /* 0x34 */ - unsigned short res13; - unsigned short sclh; /* 0x38 */ - unsigned short res14; - unsigned short systest; /* 0x3c */ - unsigned short res15; -}; - -#define I2C_BUS_MAX 2 - -#endif diff --git a/arch/arm/include/asm/arch-omap24xx/mem.h b/arch/arm/include/asm/arch-omap24xx/mem.h deleted file mode 100644 index 42e8ab2bce..0000000000 --- a/arch/arm/include/asm/arch-omap24xx/mem.h +++ /dev/null @@ -1,156 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _OMAP24XX_MEM_H_ -#define _OMAP24XX_MEM_H_ - -#define SDRC_CS0_OSET 0x0 -#define SDRC_CS1_OSET 0x30 /* mirror CS1 regs appear offset 0x30 from CS0 */ - -#ifndef __ASSEMBLY__ -/* struct's for holding data tables for current boards, they are getting used - early in init when NO global access are there */ -struct sdrc_data_s { - u32 sdrc_sharing; - u32 sdrc_mdcfg_0_ddr; - u32 sdrc_mdcfg_0_sdr; - u32 sdrc_actim_ctrla_0; - u32 sdrc_actim_ctrlb_0; - u32 sdrc_rfr_ctrl; - u32 sdrc_mr_0_ddr; - u32 sdrc_mr_0_sdr; - u32 sdrc_dllab_ctrl; -} /*__attribute__ ((packed))*/; -typedef struct sdrc_data_s sdrc_data_t; - -typedef enum { - STACKED = 0, - IP_DDR = 1, - COMBO_DDR = 2, - IP_SDR = 3, -} mem_t; - -#endif - -/* Slower full frequency range default timings for x32 operation*/ -#define H4_2420_SDRC_SHARING 0x00000100 -#define H4_2420_SDRC_MDCFG_0_SDR 0x00D04010 /* discrete sdr module */ -#define H4_2420_SDRC_MR_0_SDR 0x00000031 -#define H4_2420_SDRC_MDCFG_0_DDR 0x01702011 /* descrite ddr module */ -#define H4_2420_COMBO_MDCFG_0_DDR 0x00801011 /* combo module */ -#define H4_2420_SDRC_MR_0_DDR 0x00000032 - -#define H4_2422_SDRC_SHARING 0x00004b00 -#define H4_2422_SDRC_MDCFG_0_DDR 0x00801011 /* stacked ddr on 2422 */ -#define H4_2422_SDRC_MR_0_DDR 0x00000032 - -/* ES1 work around timings */ -#define H4_242x_SDRC_ACTIM_CTRLA_0_ES1 0x9bead909 /* 165Mhz for use with 100/133 */ -#define H4_242x_SDRC_ACTIM_CTRLB_0_ES1 0x00000020 -#define H4_242x_SDRC_RFR_CTRL_ES1 0x00002401 /* use over refresh for ES1 */ - -/* optimized timings good for current shipping parts */ -#define H4_242X_SDRC_ACTIM_CTRLA_0_100MHz 0x5A59B485 -#define H4_242X_SDRC_ACTIM_CTRLB_0_100MHz 0x0000000e -#define H4_242X_SDRC_ACTIM_CTRLA_0_133MHz 0x8BA6E6C8 /* temp warn 0 settings */ -#define H4_242X_SDRC_ACTIM_CTRLB_0_133MHz 0x00000010 /* temp warn 0 settings */ -#define H4_242X_SDRC_RFR_CTRL_100MHz 0x0002da01 -#define H4_242X_SDRC_RFR_CTRL_133MHz 0x0003de01 -#define H4_242x_SDRC_DLLAB_CTRL_100MHz 0x0000980E /* 72deg, allow DPLLout*1 to work (combo)*/ -#define H4_242x_SDRC_DLLAB_CTRL_133MHz 0x0000690E /* 72deg, for ES2 */ - -#ifdef PRCM_CONFIG_II -# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz -# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz -# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz -# define H4_2420_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz -# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz -# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz -# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz -# define H4_2422_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz -#elif PRCM_CONFIG_III -# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_133MHz -# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_133MHz -# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_133MHz -# define H4_2420_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_133MHz -# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz -# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz -# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz -# define H4_2422_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz -#endif - - -/* GPMC settings */ -#ifdef PRCM_CONFIG_II /* L3 at 100MHz */ -# ifdef CONFIG_SYS_NAND_BOOT -# define H4_24XX_GPMC_CONFIG1_0 0x0 -# define H4_24XX_GPMC_CONFIG2_0 0x00141400 -# define H4_24XX_GPMC_CONFIG3_0 0x00141400 -# define H4_24XX_GPMC_CONFIG4_0 0x0F010F01 -# define H4_24XX_GPMC_CONFIG5_0 0x010C1414 -# define H4_24XX_GPMC_CONFIG6_0 0x00000A80 -# else /* else NOR */ -# define H4_24XX_GPMC_CONFIG1_0 0x3 -# define H4_24XX_GPMC_CONFIG2_0 0x000f0f01 -# define H4_24XX_GPMC_CONFIG3_0 0x00050502 -# define H4_24XX_GPMC_CONFIG4_0 0x0C060C06 -# define H4_24XX_GPMC_CONFIG5_0 0x01131F1F -# endif /* endif CONFIG_SYS_NAND_BOOT */ -# define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24)) -# define H4_24XX_GPMC_CONFIG1_1 0x00011000 -# define H4_24XX_GPMC_CONFIG2_1 0x001F1F00 -# define H4_24XX_GPMC_CONFIG3_1 0x00080802 -# define H4_24XX_GPMC_CONFIG4_1 0x1C091C09 -# define H4_24XX_GPMC_CONFIG5_1 0x031A1F1F -# define H4_24XX_GPMC_CONFIG6_1 0x000003C2 -# define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24)) -#endif /* endif PRCM_CONFIG_II */ - -#ifdef PRCM_CONFIG_III /* L3 at 133MHz */ -# ifdef CONFIG_SYS_NAND_BOOT -# define H4_24XX_GPMC_CONFIG1_0 0x0 -# define H4_24XX_GPMC_CONFIG2_0 0x00141400 -# define H4_24XX_GPMC_CONFIG3_0 0x00141400 -# define H4_24XX_GPMC_CONFIG4_0 0x0F010F01 -# define H4_24XX_GPMC_CONFIG5_0 0x010C1414 -# define H4_24XX_GPMC_CONFIG6_0 0x00000A80 -# else /* NOR boot */ -# define H4_24XX_GPMC_CONFIG1_0 0x3 -# define H4_24XX_GPMC_CONFIG2_0 0x00151501 -# define H4_24XX_GPMC_CONFIG3_0 0x00060602 -# define H4_24XX_GPMC_CONFIG4_0 0x10081008 -# define H4_24XX_GPMC_CONFIG5_0 0x01131F1F -# define H4_24XX_GPMC_CONFIG6_0 0x000004c4 -# endif /* endif CONFIG_SYS_NAND_BOOT */ -# define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24)) -# define H4_24XX_GPMC_CONFIG1_1 0x00011000 -# define H4_24XX_GPMC_CONFIG2_1 0x001f1f01 -# define H4_24XX_GPMC_CONFIG3_1 0x00080803 -# define H4_24XX_GPMC_CONFIG4_1 0x1C091C09 -# define H4_24XX_GPMC_CONFIG5_1 0x041f1F1F -# define H4_24XX_GPMC_CONFIG6_1 0x000004C4 -# define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24)) -#endif /* endif CONFIG_SYS_PRCM_III */ - -#endif /* endif _OMAP24XX_MEM_H_ */ diff --git a/arch/arm/include/asm/arch-omap24xx/mux.h b/arch/arm/include/asm/arch-omap24xx/mux.h deleted file mode 100644 index 4fdb9c635f..0000000000 --- a/arch/arm/include/asm/arch-omap24xx/mux.h +++ /dev/null @@ -1,176 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _OMAP2420_MUX_H_ -#define _OMAP2420_MUX_H_ - -#ifndef __ASSEMBLY__ -typedef unsigned char uint8; -typedef unsigned int uint32; - -void muxSetupSDRC(void); -void muxSetupGPMC(void); -void muxSetupUsb0(void); -void muxSetupUsbHost(void); -void muxSetupUart3(void); -void muxSetupI2C1(void); -void muxSetupUART1(void); -void muxSetupLCD(void); -void muxSetupCamera(void); -void muxSetupMMCSD(void) ; -void muxSetupTouchScreen(void) ; -void muxSetupHDQ(void); -#endif - -#define USB_OTG_CTRL ((volatile uint32 *)0x4805E30C) - -/* Pin Muxing registers used for HDQ (Smart battery) */ -#define CONTROL_PADCONF_HDQ_SIO ((volatile unsigned char *)0x48000115) - -/* Pin Muxing registers used for GPMC */ -#define CONTROL_PADCONF_GPMC_D2_BYTE0 ((volatile unsigned char *)0x48000088) -#define CONTROL_PADCONF_GPMC_D2_BYTE1 ((volatile unsigned char *)0x48000089) -#define CONTROL_PADCONF_GPMC_D2_BYTE2 ((volatile unsigned char *)0x4800008A) -#define CONTROL_PADCONF_GPMC_D2_BYTE3 ((volatile unsigned char *)0x4800008B) - -#define CONTROL_PADCONF_GPMC_NCS0_BYTE0 ((volatile unsigned char *)0x4800008C) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE1 ((volatile unsigned char *)0x4800008D) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE2 ((volatile unsigned char *)0x4800008E) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE3 ((volatile unsigned char *)0x4800008F) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE4 (0x48000090) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE5 (0x48000091) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE6 (0x48000092) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE7 (0x48000093) - -/* Pin Muxing registers used for SDRC */ -#define CONTROL_PADCONF_SDRC_NCS0_BYTE0 ((volatile unsigned char *)0x480000A0) -#define CONTROL_PADCONF_SDRC_NCS0_BYTE1 ((volatile unsigned char *)0x480000A1) -#define CONTROL_PADCONF_SDRC_NCS0_BYTE2 ((volatile unsigned char *)0x480000A2) -#define CONTROL_PADCONF_SDRC_NCS0_BYTE3 ((volatile unsigned char *)0x480000A3) - -#define CONTROL_PADCONF_SDRC_A14_BYTE0 ((volatile unsigned char *)0x48000030) -#define CONTROL_PADCONF_SDRC_A14_BYTE1 ((volatile unsigned char *)0x48000031) -#define CONTROL_PADCONF_SDRC_A14_BYTE2 ((volatile unsigned char *)0x48000032) -#define CONTROL_PADCONF_SDRC_A14_BYTE3 ((volatile unsigned char *)0x48000033) - -/* Pin Muxing registers used for Touch Screen (SPI) */ -#define CONTROL_PADCONF_SPI1_CLK ((volatile unsigned char *)0x480000FF) -#define CONTROL_PADCONF_SPI1_SIMO ((volatile unsigned char *)0x48000100) -#define CONTROL_PADCONF_SPI1_SOMI ((volatile unsigned char *)0x48000101) -#define CONTROL_PADCONF_SPI1_NCS0 ((volatile unsigned char *)0x48000102) -#define CONTROL_PADCONF_SPI1_NCS1 (0x48000103) - -#define CONTROL_PADCONF_MCBSP1_FSR ((volatile unsigned char *)0x4800010B) - -/* Pin Muxing registers used for MMCSD */ -#define CONTROL_PADCONF_MMC_CLKI ((volatile unsigned char *)0x480000FE) -#define CONTROL_PADCONF_MMC_CLKO ((volatile unsigned char *)0x480000F3) -#define CONTROL_PADCONF_MMC_CMD ((volatile unsigned char *)0x480000F4) -#define CONTROL_PADCONF_MMC_DAT0 ((volatile unsigned char *)0x480000F5) -#define CONTROL_PADCONF_MMC_DAT1 ((volatile unsigned char *)0x480000F6) -#define CONTROL_PADCONF_MMC_DAT2 ((volatile unsigned char *)0x480000F7) -#define CONTROL_PADCONF_MMC_DAT3 ((volatile unsigned char *)0x480000F8) -#define CONTROL_PADCONF_MMC_DAT_DIR0 ((volatile unsigned char *)0x480000F9) -#define CONTROL_PADCONF_MMC_DAT_DIR1 ((volatile unsigned char *)0x480000FA) -#define CONTROL_PADCONF_MMC_DAT_DIR2 ((volatile unsigned char *)0x480000FB) -#define CONTROL_PADCONF_MMC_DAT_DIR3 ((volatile unsigned char *)0x480000FC) -#define CONTROL_PADCONF_MMC_CMD_DIR ((volatile unsigned char *)0x480000FD) - -#define CONTROL_PADCONF_SDRC_A14 ((volatile unsigned char *)0x48000030) -#define CONTROL_PADCONF_SDRC_A13 ((volatile unsigned char *)0x48000031) - -/* Pin Muxing registers used for CAMERA */ -#define CONTROL_PADCONF_SYS_NRESWARM ((volatile unsigned char *)0x4800012B) - -#define CONTROL_PADCONF_CAM_XCLK ((volatile unsigned char *)0x480000DC) -#define CONTROL_PADCONF_CAM_LCLK ((volatile unsigned char *)0x480000DB) -#define CONTROL_PADCONF_CAM_VS ((volatile unsigned char *)0x480000DA) -#define CONTROL_PADCONF_CAM_HS ((volatile unsigned char *)0x480000D9) -#define CONTROL_PADCONF_CAM_D0 ((volatile unsigned char *)0x480000D8) -#define CONTROL_PADCONF_CAM_D1 ((volatile unsigned char *)0x480000D7) -#define CONTROL_PADCONF_CAM_D2 ((volatile unsigned char *)0x480000D6) -#define CONTROL_PADCONF_CAM_D3 ((volatile unsigned char *)0x480000D5) -#define CONTROL_PADCONF_CAM_D4 ((volatile unsigned char *)0x480000D4) -#define CONTROL_PADCONF_CAM_D5 ((volatile unsigned char *)0x480000D3) -#define CONTROL_PADCONF_CAM_D6 ((volatile unsigned char *)0x480000D2) -#define CONTROL_PADCONF_CAM_D7 ((volatile unsigned char *)0x480000D1) -#define CONTROL_PADCONF_CAM_D8 ((volatile unsigned char *)0x480000D0) -#define CONTROL_PADCONF_CAM_D9 ((volatile unsigned char *)0x480000CF) - -/* Pin Muxing registers used for LCD */ -#define CONTROL_PADCONF_DSS_D0 ((volatile unsigned char *)0x480000B3) -#define CONTROL_PADCONF_DSS_D1 ((volatile unsigned char *)0x480000B4) -#define CONTROL_PADCONF_DSS_D2 ((volatile unsigned char *)0x480000B5) -#define CONTROL_PADCONF_DSS_D3 ((volatile unsigned char *)0x480000B6) -#define CONTROL_PADCONF_DSS_D4 ((volatile unsigned char *)0x480000B7) -#define CONTROL_PADCONF_DSS_D5 ((volatile unsigned char *)0x480000B8) -#define CONTROL_PADCONF_DSS_D6 ((volatile unsigned char *)0x480000B9) -#define CONTROL_PADCONF_DSS_D7 ((volatile unsigned char *)0x480000BA) -#define CONTROL_PADCONF_DSS_D8 ((volatile unsigned char *)0x480000BB) -#define CONTROL_PADCONF_DSS_D9 ((volatile unsigned char *)0x480000BC) -#define CONTROL_PADCONF_DSS_D10 ((volatile unsigned char *)0x480000BD) -#define CONTROL_PADCONF_DSS_D11 ((volatile unsigned char *)0x480000BE) -#define CONTROL_PADCONF_DSS_D12 ((volatile unsigned char *)0x480000BF) -#define CONTROL_PADCONF_DSS_D13 ((volatile unsigned char *)0x480000C0) -#define CONTROL_PADCONF_DSS_D14 ((volatile unsigned char *)0x480000C1) -#define CONTROL_PADCONF_DSS_D15 ((volatile unsigned char *)0x480000C2) -#define CONTROL_PADCONF_DSS_D16 ((volatile unsigned char *)0x480000C3) -#define CONTROL_PADCONF_DSS_D17 ((volatile unsigned char *)0x480000C4) -#define CONTROL_PADCONF_DSS_PCLK ((volatile unsigned char *)0x480000CB) -#define CONTROL_PADCONF_DSS_VSYNC ((volatile unsigned char *)0x480000CC) -#define CONTROL_PADCONF_DSS_HSYNC ((volatile unsigned char *)0x480000CD) -#define CONTROL_PADCONF_DSS_ACBIAS ((volatile unsigned char *)0x480000CE) - -/* Pin Muxing registers used for UART1 */ -#define CONTROL_PADCONF_UART1_CTS ((volatile unsigned char *)0x480000C5) -#define CONTROL_PADCONF_UART1_RTS ((volatile unsigned char *)0x480000C6) -#define CONTROL_PADCONF_UART1_TX ((volatile unsigned char *)0x480000C7) -#define CONTROL_PADCONF_UART1_RX ((volatile unsigned char *)0x480000C8) - -/* Pin Muxing registers used for I2C1 */ -#define CONTROL_PADCONF_I2C1_SCL ((volatile unsigned char *)0x48000111) -#define CONTROL_PADCONF_I2C1_SDA ((volatile unsigned char *)0x48000112) - -/* Pin Muxing registres used for USB0. */ -#define CONTROL_PADCONF_USB0_PUEN ((volatile uint8 *)0x4800011D) -#define CONTROL_PADCONF_USB0_VP ((volatile uint8 *)0x4800011E) -#define CONTROL_PADCONF_USB0_VM ((volatile uint8 *)0x4800011F) -#define CONTROL_PADCONF_USB0_RCV ((volatile uint8 *)0x48000120) -#define CONTROL_PADCONF_USB0_TXEN ((volatile uint8 *)0x48000121) -#define CONTROL_PADCONF_USB0_SE0 ((volatile uint8 *)0x48000122) -#define CONTROL_PADCONF_USB0_DAT ((volatile uint8 *)0x48000123) - -/* Pin Muxing registres used for USB1. */ -#define CONTROL_PADCONF_USB1_RCV (0x480000EB) -#define CONTROL_PADCONF_USB1_TXEN (0x480000EC) - -/* Pin Muxing registers used for UART3/IRDA */ -#define CONTROL_PADCONF_UART3_TX_IRTX ((volatile uint8 *)0x48000118) -#define CONTROL_PADCONF_UART3_RX_IRRX ((volatile uint8 *)0x48000119) - -/* Pin Muxing registers used for GPIO */ -#define CONTROL_PADCONF_GPIO69 (0x480000ED) -#define CONTROL_PADCONF_GPIO70 (0x480000EE) -#define CONTROL_PADCONF_GPIO102 (0x48000116) -#define CONTROL_PADCONF_GPIO103 (0x48000117) -#define CONTROL_PADCONF_GPIO104 (0x48000118) -#define CONTROL_PADCONF_GPIO105 (0x48000119) - -#endif diff --git a/arch/arm/include/asm/arch-omap24xx/omap2420.h b/arch/arm/include/asm/arch-omap24xx/omap2420.h deleted file mode 100644 index 5724f5d4ba..0000000000 --- a/arch/arm/include/asm/arch-omap24xx/omap2420.h +++ /dev/null @@ -1,236 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _OMAP2420_SYS_H_ -#define _OMAP2420_SYS_H_ - -#include <asm/sizes.h> - -/* - * 2420 specific Section - */ - -/* L3 Firewall */ -#define A_REQINFOPERM0 0x68005048 -#define A_READPERM0 0x68005050 -#define A_WRITEPERM0 0x68005058 -/* #define GP_DEVICE (BIT8|BIT9) FIXME -- commented out to make compile -- FIXME */ - -/* L3 Firewall */ -#define A_REQINFOPERM0 0x68005048 -#define A_READPERM0 0x68005050 -#define A_WRITEPERM0 0x68005058 - -/* CONTROL */ -#define OMAP2420_CTRL_BASE (0x48000000) -#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8) - -/* device type */ -#define TST_DEVICE 0x0 -#define EMU_DEVICE 0x1 -#define HS_DEVICE 0x2 -#define GP_DEVICE 0x3 - -/* TAP information */ -#define OMAP2420_TAP_BASE (0x48014000) -#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204) -#define PRODUCTION_ID (OMAP2420_TAP_BASE+0x208) - -/* GPMC */ -#define OMAP2420_GPMC_BASE (0x6800A000) -#define GPMC_SYSCONFIG (OMAP2420_GPMC_BASE+0x10) -#define GPMC_IRQENABLE (OMAP2420_GPMC_BASE+0x1C) -#define GPMC_TIMEOUT_CONTROL (OMAP2420_GPMC_BASE+0x40) -#define GPMC_CONFIG (OMAP2420_GPMC_BASE+0x50) -#define GPMC_CONFIG1_0 (OMAP2420_GPMC_BASE+0x60) -#define GPMC_CONFIG2_0 (OMAP2420_GPMC_BASE+0x64) -#define GPMC_CONFIG3_0 (OMAP2420_GPMC_BASE+0x68) -#define GPMC_CONFIG4_0 (OMAP2420_GPMC_BASE+0x6C) -#define GPMC_CONFIG5_0 (OMAP2420_GPMC_BASE+0x70) -#define GPMC_CONFIG6_0 (OMAP2420_GPMC_BASE+0x74) -#define GPMC_CONFIG7_0 (OMAP2420_GPMC_BASE+0x78) -#define GPMC_CONFIG1_1 (OMAP2420_GPMC_BASE+0x90) -#define GPMC_CONFIG2_1 (OMAP2420_GPMC_BASE+0x94) -#define GPMC_CONFIG3_1 (OMAP2420_GPMC_BASE+0x98) -#define GPMC_CONFIG4_1 (OMAP2420_GPMC_BASE+0x9C) -#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0) -#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4) -#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8) -#define GPMC_CONFIG1_2 (OMAP2420_GPMC_BASE+0xC0) -#define GPMC_CONFIG2_2 (OMAP2420_GPMC_BASE+0xC4) -#define GPMC_CONFIG3_2 (OMAP2420_GPMC_BASE+0xC8) -#define GPMC_CONFIG4_2 (OMAP2420_GPMC_BASE+0xCC) -#define GPMC_CONFIG5_2 (OMAP2420_GPMC_BASE+0xD0) -#define GPMC_CONFIG6_2 (OMAP2420_GPMC_BASE+0xD4) -#define GPMC_CONFIG7_2 (OMAP2420_GPMC_BASE+0xD8) -#define GPMC_CONFIG1_3 (OMAP2420_GPMC_BASE+0xF0) -#define GPMC_CONFIG2_3 (OMAP2420_GPMC_BASE+0xF4) -#define GPMC_CONFIG3_3 (OMAP2420_GPMC_BASE+0xF8) -#define GPMC_CONFIG4_3 (OMAP2420_GPMC_BASE+0xFC) -#define GPMC_CONFIG5_3 (OMAP2420_GPMC_BASE+0x100) -#define GPMC_CONFIG6_3 (OMAP2420_GPMC_BASE+0x104) -#define GPMC_CONFIG7_3 (OMAP2420_GPMC_BASE+0x108) - -/* SMS */ -#define OMAP2420_SMS_BASE 0x68008000 -#define SMS_SYSCONFIG (OMAP2420_SMS_BASE+0x10) -#define SMS_CLASS_ARB0 (OMAP2420_SMS_BASE+0xD0) -# define BURSTCOMPLETE_GROUP7 BIT31 - -/* SDRC */ -#define OMAP2420_SDRC_BASE 0x68009000 -#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10) -#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14) -#define SDRC_CS_CFG (OMAP2420_SDRC_BASE+0x40) -#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44) -#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60) -#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68) -#define SDRC_POWER (OMAP2420_SDRC_BASE+0x70) -#define SDRC_MCFG_0 (OMAP2420_SDRC_BASE+0x80) -#define SDRC_MR_0 (OMAP2420_SDRC_BASE+0x84) -#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C) -#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0) -#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4) -#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8) -#define SDRC_RFR_CTRL (OMAP2420_SDRC_BASE+0xA4) -#define SDRC_MANUAL_0 (OMAP2420_SDRC_BASE+0xA8) -#define OMAP2420_SDRC_CS0 0x80000000 -#define OMAP2420_SDRC_CS1 0xA0000000 -#define CMD_NOP 0x0 -#define CMD_PRECHARGE 0x1 -#define CMD_AUTOREFRESH 0x2 -#define CMD_ENTR_PWRDOWN 0x3 -#define CMD_EXIT_PWRDOWN 0x4 -#define CMD_ENTR_SRFRSH 0x5 -#define CMD_CKE_HIGH 0x6 -#define CMD_CKE_LOW 0x7 -#define SOFTRESET BIT1 -#define SMART_IDLE (0x2 << 3) -#define REF_ON_IDLE (0x1 << 6) - - -/* UART */ -#define OMAP2420_UART1 0x4806A000 -#define OMAP2420_UART2 0x4806C000 -#define OMAP2420_UART3 0x4806E000 - -/* General Purpose Timers */ -#define OMAP2420_GPT1 0x48028000 -#define OMAP2420_GPT2 0x4802A000 -#define OMAP2420_GPT3 0x48078000 -#define OMAP2420_GPT4 0x4807A000 -#define OMAP2420_GPT5 0x4807C000 -#define OMAP2420_GPT6 0x4807E000 -#define OMAP2420_GPT7 0x48080000 -#define OMAP2420_GPT8 0x48082000 -#define OMAP2420_GPT9 0x48084000 -#define OMAP2420_GPT10 0x48086000 -#define OMAP2420_GPT11 0x48088000 -#define OMAP2420_GPT12 0x4808A000 - -/* timer regs offsets (32 bit regs) */ -#define TIDR 0x0 /* r */ -#define TIOCP_CFG 0x10 /* rw */ -#define TISTAT 0x14 /* r */ -#define TISR 0x18 /* rw */ -#define TIER 0x1C /* rw */ -#define TWER 0x20 /* rw */ -#define TCLR 0x24 /* rw */ -#define TCRR 0x28 /* rw */ -#define TLDR 0x2C /* rw */ -#define TTGR 0x30 /* rw */ -#define TWPS 0x34 /* r */ -#define TMAR 0x38 /* rw */ -#define TCAR1 0x3c /* r */ -#define TSICR 0x40 /* rw */ -#define TCAR2 0x44 /* r */ - -/* WatchDog Timers (1 secure, 3 GP) */ -#define WD1_BASE 0x48020000 -#define WD2_BASE 0x48022000 -#define WD3_BASE 0x48024000 -#define WD4_BASE 0x48026000 -#define WWPS 0x34 /* r */ -#define WSPR 0x48 /* rw */ -#define WD_UNLOCK1 0xAAAA -#define WD_UNLOCK2 0x5555 - -/* PRCM */ -#define OMAP2420_CM_BASE 0x48008000 -#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080) -#define CM_CLKSEL_MPU (OMAP2420_CM_BASE+0x140) -#define CM_FCLKEN1_CORE (OMAP2420_CM_BASE+0x200) -#define CM_FCLKEN2_CORE (OMAP2420_CM_BASE+0x204) -#define CM_ICLKEN1_CORE (OMAP2420_CM_BASE+0x210) -#define CM_ICLKEN2_CORE (OMAP2420_CM_BASE+0x214) -#define CM_CLKSEL1_CORE (OMAP2420_CM_BASE+0x240) -#define CM_CLKSEL_WKUP (OMAP2420_CM_BASE+0x440) -#define CM_CLKSEL2_CORE (OMAP2420_CM_BASE+0x244) -#define CM_CLKSEL_GFX (OMAP2420_CM_BASE+0x340) -#define PM_RSTCTRL_WKUP (OMAP2420_CM_BASE+0x450) -#define CM_CLKEN_PLL (OMAP2420_CM_BASE+0x500) -#define CM_IDLEST_CKGEN (OMAP2420_CM_BASE+0x520) -#define CM_CLKSEL1_PLL (OMAP2420_CM_BASE+0x540) -#define CM_CLKSEL2_PLL (OMAP2420_CM_BASE+0x544) -#define CM_CLKSEL_DSP (OMAP2420_CM_BASE+0x840) - -/* - * H4 specific Section - */ - -/* - * The 2420's chip selects are programmable. The mask ROM - * does configure CS0 to 0x08000000 before dispatch. So, if - * you want your code to live below that address, you have to - * be prepared to jump though hoops, to reset the base address. - */ -#if defined(CONFIG_OMAP2420H4) -/* GPMC */ -#ifdef CONFIG_VIRTIO_A /* Pre version B */ -# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */ -# define H4_CS1_BASE 0x04000000 /* debug board */ -# define H4_CS2_BASE 0x0A000000 /* wifi board */ -#else -# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */ -# define H4_CS1_BASE 0x04000000 /* debug board */ -# define H4_CS2_BASE 0x0C000000 /* wifi board */ -#endif - -/* base address for indirect vectors (internal boot mode) */ -#define SRAM_OFFSET0 0x40000000 -#define SRAM_OFFSET1 0x00200000 -#define SRAM_OFFSET2 0x0000F800 -#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) - -/* FPGA on Debug board.*/ -#define ETH_CONTROL_REG (H4_CS1_BASE+0x30b) -#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c) -#endif /* endif CONFIG_2420H4 */ - -/* Common */ -#define LOW_LEVEL_SRAM_STACK 0x4020FFFC - -#define PERIFERAL_PORT_BASE 0x480FE003 - -#endif diff --git a/arch/arm/include/asm/arch-omap24xx/sys_info.h b/arch/arm/include/asm/arch-omap24xx/sys_info.h deleted file mode 100644 index 53c231a5e4..0000000000 --- a/arch/arm/include/asm/arch-omap24xx/sys_info.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _OMAP24XX_SYS_INFO_H_ -#define _OMAP24XX_SYS_INFO_H_ - -typedef struct h4_system_data { - /* base board info */ - u32 base_b_rev; /* rev from base board i2c */ - /* cpu board info */ - u32 cpu_b_rev; /* rev from cpu board i2c */ - u32 cpu_b_mux; /* mux type on daughter board */ - u32 cpu_b_ddr_type; /* mem type */ - u32 cpu_b_ddr_speed; /* ddr speed rating */ - u32 cpu_b_switches; /* boot ctrl switch settings */ - /* cpu info */ - u32 cpu_type; /* type of cpu; 2420, 2422, 2430,...*/ - u32 cpu_rev; /* rev of given cpu; ES1, ES2,...*/ -} h4_sys_data; - -#define XDR_POP 5 /* package on package part */ -#define SDR_DISCRETE 4 /* 128M memory SDR module*/ -#define DDR_STACKED 3 /* stacked part on 2422 */ -#define DDR_COMBO 2 /* combo part on cpu daughter card (menalaeus) */ -#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */ - -#define DDR_100 100 /* type found on most mem d-boards */ -#define DDR_111 111 /* some combo parts */ -#define DDR_133 133 /* most combo, some mem d-boards */ -#define DDR_165 165 /* future parts */ - -#define CPU_2420 0x2420 -#define CPU_2422 0x2422 /* 2420 + 64M stacked */ -#define CPU_2423 0x2423 /* 2420 + 96M stacked */ - -#define CPU_2422_ES1 1 -#define CPU_2422_ES2 2 -#define CPU_2420_ES1 1 -#define CPU_2420_ES2 2 -#define CPU_2420_2422_ES1 1 - -#define CPU_2420_CHIPID 0x0B5D9000 -#define CPU_24XX_ID_MASK 0x0FFFF000 -#define CPU_242X_REV_MASK 0xF0000000 -#define CPU_242X_PID_MASK 0x000F0000 - -#define BOARD_H4_MENELAUS 1 -#define BOARD_H4_SDP 2 - -#define GPMC_MUXED 1 -#define GPMC_NONMUXED 0 - -#define TYPE_NAND 0x800 /* bit pos for nand in gpmc reg */ -#define TYPE_NOR 0x000 - -#define WIDTH_8BIT 0x0000 -#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ - -#define I2C_MENELAUS 0x72 /* i2c id for companion chip */ - -#endif diff --git a/arch/arm/include/asm/arch-omap24xx/sys_proto.h b/arch/arm/include/asm/arch-omap24xx/sys_proto.h deleted file mode 100644 index 9d8e5b2622..0000000000 --- a/arch/arm/include/asm/arch-omap24xx/sys_proto.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _OMAP24XX_SYS_PROTO_H_ -#define _OMAP24XX_SYS_PROTO_H_ - -void prcm_init(void); -void memif_init(void); -void sdrc_init(void); -void do_sdrc_init(u32,u32); -void gpmc_init(void); - -void ether_init(void); -void watchdog_init(void); -void set_muxconf_regs(void); -void peripheral_enable(void); - -u32 get_cpu_type(void); -u32 get_cpu_rev(void); -u32 get_mem_type(void); -u32 get_sysboot_value(void); -u32 get_gpmc0_base(void); -u32 is_gpmc_muxed(void); -u32 get_gpmc0_type(void); -u32 get_gpmc0_width(void); -u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound); -u32 get_board_type(void); -void display_board_info(u32); -void update_mux(u32,u32); -u32 get_sdr_cs_size(u32 offset); - -u32 running_in_sdram(void); -u32 running_in_sram(void); -u32 running_in_flash(void); -u32 running_from_internal_boot(void); -u32 get_device_type(void); -#endif diff --git a/arch/arm/include/asm/arch-omap3/clocks.h b/arch/arm/include/asm/arch-omap3/clock.h index bed0002ec0..bed0002ec0 100644 --- a/arch/arm/include/asm/arch-omap3/clocks.h +++ b/arch/arm/include/asm/arch-omap3/clock.h diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h index 2b5e9aeae1..c57599a938 100644 --- a/arch/arm/include/asm/arch-omap3/omap3.h +++ b/arch/arm/include/asm/arch-omap3/omap3.h @@ -253,4 +253,11 @@ struct gpio { #define OMAP3_EMU_HAL_START_HAL_CRITICAL 4 +/* ABB settings */ +#define OMAP_ABB_SETTLING_TIME 30 +#define OMAP_ABB_CLOCK_CYCLES 8 + +/* ABB tranxdone mask */ +#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 26) + #endif diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clock.h index ed7a1c8be7..d14d8fb8af 100644 --- a/arch/arm/include/asm/arch-omap4/clocks.h +++ b/arch/arm/include/asm/arch-omap4/clock.h @@ -34,25 +34,6 @@ */ #define LDELAY 1000000 -#define CM_CLKMODE_DPLL_CORE 0x4A004120 -#define CM_CLKMODE_DPLL_PER 0x4A008140 -#define CM_CLKMODE_DPLL_MPU 0x4A004160 -#define CM_CLKSEL_CORE 0x4A004100 - -/* DPLL register offsets */ -#define CM_CLKMODE_DPLL 0 -#define CM_IDLEST_DPLL 0x4 -#define CM_AUTOIDLE_DPLL 0x8 -#define CM_CLKSEL_DPLL 0xC -#define CM_DIV_M2_DPLL 0x10 -#define CM_DIV_M3_DPLL 0x14 -#define CM_DIV_M4_DPLL 0x18 -#define CM_DIV_M5_DPLL 0x1C -#define CM_DIV_M6_DPLL 0x20 -#define CM_DIV_M7_DPLL 0x24 - -#define DPLL_CLKOUT_DIV_MASK 0x1F /* post-divider mask */ - /* CM_DLL_CTRL */ #define CM_DLL_CTRL_OVERRIDE_SHIFT 0 #define CM_DLL_CTRL_OVERRIDE_MASK (1 << 0) @@ -94,10 +75,8 @@ #define CM_CLKSEL_DCC_EN_SHIFT 22 #define CM_CLKSEL_DCC_EN_MASK (1 << 22) -#define OMAP4_DPLL_MAX_N 127 - /* CM_SYS_CLKSEL */ -#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7 +#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7 /* CM_CLKSEL_CORE */ #define CLKSEL_CORE_SHIFT 0 @@ -181,9 +160,7 @@ #define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 25) /* Clock frequencies */ -#define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000 #define OMAP_SYS_CLK_IND_38_4_MHZ 6 -#define OMAP_32K_CLK_FREQ 32768 /* PRM_VC_VAL_BYPASS */ #define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400 @@ -234,14 +211,13 @@ #define ALTCLKSRC_MODE_ACTIVE 1 -/* Defines for DPLL setup */ -#define DPLL_LOCKED_FREQ_TOLERANCE_0 0 -#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ 500 -#define DPLL_LOCKED_FREQ_TOLERANCE_1_MHZ 1000 - #define DPLL_NO_LOCK 0 #define DPLL_LOCK 1 +/* Clock Defines */ +#define V_OSCK 38400000 /* Clock output from T2 */ +#define V_SCLK V_OSCK + struct omap4_scrm_regs { u32 revision; /* 0x0000 */ u32 pad00[63]; diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h index 3a0bfbf0c6..311c6ff522 100644 --- a/arch/arm/include/asm/arch-omap4/cpu.h +++ b/arch/arm/include/asm/arch-omap4/cpu.h @@ -115,18 +115,6 @@ struct watchdog { #define WD_UNLOCK1 0xAAAA #define WD_UNLOCK2 0x5555 -#define SYSCLKDIV_1 (0x1 << 6) -#define SYSCLKDIV_2 (0x1 << 7) - -#define CLKSEL_GPT1 (0x1 << 0) - -#define EN_GPT1 (0x1 << 0) -#define EN_32KSYNC (0x1 << 2) - -#define ST_WDT2 (0x1 << 5) - -#define RESETDONE (0x1 << 0) - #define TCLR_ST (0x1 << 0) #define TCLR_AR (0x1 << 1) #define TCLR_PRE (0x1 << 5) diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index e9a6ffeb83..66afd92492 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -47,14 +47,6 @@ #define DRAM_ADDR_SPACE_START OMAP44XX_DRAM_ADDR_SPACE_START #define DRAM_ADDR_SPACE_END OMAP44XX_DRAM_ADDR_SPACE_END -/* CONTROL */ -#define CTRL_BASE (OMAP44XX_L4_CORE_BASE + 0x2000) -#define CONTROL_PADCONF_CORE (OMAP44XX_L4_CORE_BASE + 0x100000) -#define CONTROL_PADCONF_WKUP (OMAP44XX_L4_CORE_BASE + 0x31E000) - -/* LPDDR2 IO regs */ -#define LPDDR2_IO_REGS_BASE 0x4A100638 - /* CONTROL_ID_CODE */ #define CONTROL_ID_CODE 0x4A002204 @@ -79,15 +71,9 @@ /* Watchdog Timer2 - MPU watchdog */ #define WDT2_BASE (OMAP44XX_L4_WKUP_BASE + 0x14000) -/* 32KTIMER */ -#define SYNC_32KTIMER_BASE (OMAP44XX_L4_WKUP_BASE + 0x4000) - /* GPMC */ #define OMAP44XX_GPMC_BASE 0x50000000 -/* SYSTEM CONTROL MODULE */ -#define SYSCTRL_GENERAL_CORE_BASE 0x4A002000 - /* * Hardware Register Details */ @@ -143,4 +129,12 @@ struct s32ktimer { #define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */ /* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4030D000 + +/* ABB settings */ +#define OMAP_ABB_SETTLING_TIME 50 +#define OMAP_ABB_CLOCK_CYCLES 16 + +/* ABB tranxdone mask */ +#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7) + #endif diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h index ef85594bd2..e413466148 100644 --- a/arch/arm/include/asm/arch-omap4/sys_proto.h +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -22,7 +22,7 @@ #define _SYS_PROTO_H_ #include <asm/arch/omap.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/io.h> #include <asm/omap_common.h> #include <asm/arch/mux_omap4.h> @@ -57,7 +57,8 @@ u32 cortex_rev(void); void save_omap_boot_params(void); void init_omap_revision(void); void do_io_settings(void); -void omap_vc_init(u16 speed_khz); +void sri2c_init(void); +void gpi2c_init(void); int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data); u32 warm_reset(void); void force_emif_self_refresh(void); diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clock.h index 68afa76696..4d2765d878 100644 --- a/arch/arm/include/asm/arch-omap5/clocks.h +++ b/arch/arm/include/asm/arch-omap5/clock.h @@ -35,19 +35,6 @@ */ #define LDELAY 1000000 -#define CM_CLKMODE_DPLL_CORE (OMAP54XX_L4_CORE_BASE + 0x4120) -#define CM_CLKMODE_DPLL_PER (OMAP54XX_L4_CORE_BASE + 0x8140) -#define CM_CLKMODE_DPLL_MPU (OMAP54XX_L4_CORE_BASE + 0x4160) -#define CM_CLKSEL_CORE (OMAP54XX_L4_CORE_BASE + 0x4100) - -/* DPLL register offsets */ -#define CM_CLKMODE_DPLL 0 -#define CM_IDLEST_DPLL 0x4 -#define CM_AUTOIDLE_DPLL 0x8 -#define CM_CLKSEL_DPLL 0xC - -#define DPLL_CLKOUT_DIV_MASK 0x1F /* post-divider mask */ - /* CM_DLL_CTRL */ #define CM_DLL_CTRL_OVERRIDE_SHIFT 0 #define CM_DLL_CTRL_OVERRIDE_MASK (1 << 0) @@ -93,10 +80,8 @@ #define CM_CLKSEL_DCC_EN_SHIFT 22 #define CM_CLKSEL_DCC_EN_MASK (1 << 22) -#define OMAP4_DPLL_MAX_N 127 - /* CM_SYS_CLKSEL */ -#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7 +#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7 /* CM_CLKSEL_CORE */ #define CLKSEL_CORE_SHIFT 0 @@ -113,6 +98,12 @@ #define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK 0 #define CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK 1 +/* CM_CLKSEL_ABE_PLL_SYS */ +#define CM_CLKSEL_ABE_PLL_SYS_CLKSEL_SHIFT 0 +#define CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK 1 +#define CM_ABE_PLL_SYS_CLKSEL_SYSCLK1 0 +#define CM_ABE_PLL_SYS_CLKSEL_SYSCLK2 1 + /* CM_BYPCLK_DPLL_IVA */ #define CM_BYPCLK_DPLL_IVA_CLKSEL_SHIFT 0 #define CM_BYPCLK_DPLL_IVA_CLKSEL_MASK 3 @@ -195,9 +186,7 @@ #define RSTTIME1_MASK (0x3ff << 0) /* Clock frequencies */ -#define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000 #define OMAP_SYS_CLK_IND_38_4_MHZ 6 -#define OMAP_32K_CLK_FREQ 32768 /* PRM_VC_VAL_BYPASS */ #define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400 @@ -229,9 +218,54 @@ #define VDD_MPU_ES2_LOW 880 #define VDD_MM_ES2_LOW 880 +/* TPS659038 Voltage settings in mv for OPP_NOMINAL */ +#define VDD_MPU_DRA752 1090 +#define VDD_EVE_DRA752 1060 +#define VDD_GPU_DRA752 1060 +#define VDD_CORE_DRA752 1030 +#define VDD_IVA_DRA752 1060 + +/* Efuse register offsets for DRA7xx platform */ +#define DRA752_EFUSE_BASE 0x4A002000 +#define DRA752_EFUSE_REGBITS 16 +/* STD_FUSE_OPP_VMIN_IVA_2 */ +#define STD_FUSE_OPP_VMIN_IVA_NOM (DRA752_EFUSE_BASE + 0x05CC) +/* STD_FUSE_OPP_VMIN_IVA_3 */ +#define STD_FUSE_OPP_VMIN_IVA_OD (DRA752_EFUSE_BASE + 0x05D0) +/* STD_FUSE_OPP_VMIN_IVA_4 */ +#define STD_FUSE_OPP_VMIN_IVA_HIGH (DRA752_EFUSE_BASE + 0x05D4) +/* STD_FUSE_OPP_VMIN_DSPEVE_2 */ +#define STD_FUSE_OPP_VMIN_DSPEVE_NOM (DRA752_EFUSE_BASE + 0x05E0) +/* STD_FUSE_OPP_VMIN_DSPEVE_3 */ +#define STD_FUSE_OPP_VMIN_DSPEVE_OD (DRA752_EFUSE_BASE + 0x05E4) +/* STD_FUSE_OPP_VMIN_DSPEVE_4 */ +#define STD_FUSE_OPP_VMIN_DSPEVE_HIGH (DRA752_EFUSE_BASE + 0x05E8) +/* STD_FUSE_OPP_VMIN_CORE_2 */ +#define STD_FUSE_OPP_VMIN_CORE_NOM (DRA752_EFUSE_BASE + 0x05F4) +/* STD_FUSE_OPP_VMIN_GPU_2 */ +#define STD_FUSE_OPP_VMIN_GPU_NOM (DRA752_EFUSE_BASE + 0x1B08) +/* STD_FUSE_OPP_VMIN_GPU_3 */ +#define STD_FUSE_OPP_VMIN_GPU_OD (DRA752_EFUSE_BASE + 0x1B0C) +/* STD_FUSE_OPP_VMIN_GPU_4 */ +#define STD_FUSE_OPP_VMIN_GPU_HIGH (DRA752_EFUSE_BASE + 0x1B10) +/* STD_FUSE_OPP_VMIN_MPU_2 */ +#define STD_FUSE_OPP_VMIN_MPU_NOM (DRA752_EFUSE_BASE + 0x1B20) +/* STD_FUSE_OPP_VMIN_MPU_3 */ +#define STD_FUSE_OPP_VMIN_MPU_OD (DRA752_EFUSE_BASE + 0x1B24) +/* STD_FUSE_OPP_VMIN_MPU_4 */ +#define STD_FUSE_OPP_VMIN_MPU_HIGH (DRA752_EFUSE_BASE + 0x1B28) + /* Standard offset is 0.5v expressed in uv */ #define PALMAS_SMPS_BASE_VOLT_UV 500000 +/* TPS659038 */ +#define TPS659038_I2C_SLAVE_ADDR 0x58 +#define TPS659038_REG_ADDR_SMPS12_MPU 0x23 +#define TPS659038_REG_ADDR_SMPS45_EVE 0x2B +#define TPS659038_REG_ADDR_SMPS6_GPU 0x2F +#define TPS659038_REG_ADDR_SMPS7_CORE 0x33 +#define TPS659038_REG_ADDR_SMPS8_IVA 0x37 + /* TPS */ #define TPS62361_I2C_SLAVE_ADDR 0x60 #define TPS62361_REG_ADDR_SET0 0x0 @@ -261,4 +295,25 @@ * into microsec and passing the value. */ #define CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC 31219 + +#ifdef CONFIG_DRA7XX +#define V_OSCK 20000000 /* Clock output from T2 */ +#else +#define V_OSCK 19200000 /* Clock output from T2 */ +#endif + +#define V_SCLK V_OSCK + +/* AUXCLKx reg fields */ +#define AUXCLK_ENABLE_MASK (1 << 8) +#define AUXCLK_SRCSELECT_SHIFT 1 +#define AUXCLK_SRCSELECT_MASK (3 << 1) +#define AUXCLK_CLKDIV_SHIFT 16 +#define AUXCLK_CLKDIV_MASK (0xF << 16) + +#define AUXCLK_SRCSELECT_SYS_CLK 0 +#define AUXCLK_SRCSELECT_CORE_DPLL 1 +#define AUXCLK_SRCSELECT_PER_DPLL 2 +#define AUXCLK_SRCSELECT_ALTERNATE 3 + #endif /* _CLOCKS_OMAP5_H_ */ diff --git a/arch/arm/include/asm/arch-omap5/cpu.h b/arch/arm/include/asm/arch-omap5/cpu.h index 044ab5581a..4753f4624e 100644 --- a/arch/arm/include/asm/arch-omap5/cpu.h +++ b/arch/arm/include/asm/arch-omap5/cpu.h @@ -119,18 +119,6 @@ struct watchdog { #define WD_UNLOCK1 0xAAAA #define WD_UNLOCK2 0x5555 -#define SYSCLKDIV_1 (0x1 << 6) -#define SYSCLKDIV_2 (0x1 << 7) - -#define CLKSEL_GPT1 (0x1 << 0) - -#define EN_GPT1 (0x1 << 0) -#define EN_32KSYNC (0x1 << 2) - -#define ST_WDT2 (0x1 << 5) - -#define RESETDONE (0x1 << 0) - #define TCLR_ST (0x1 << 0) #define TCLR_AR (0x1 << 1) #define TCLR_PRE (0x1 << 5) diff --git a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h index 55e9de6041..5f2b0f9f5d 100644 --- a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h +++ b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h @@ -28,11 +28,14 @@ #include <asm/types.h> +#define FSC (1 << 19) +#define SSC (0 << 19) + #define IEN (1 << 18) #define IDIS (0 << 18) -#define PTU (3 << 16) -#define PTD (1 << 16) +#define PTU (1 << 17) +#define PTD (0 << 17) #define PEN (1 << 16) #define PDIS (0 << 16) diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 4f43a903d8..817c1ff27f 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -44,16 +44,15 @@ #define DRAM_ADDR_SPACE_START OMAP54XX_DRAM_ADDR_SPACE_START #define DRAM_ADDR_SPACE_END OMAP54XX_DRAM_ADDR_SPACE_END -/* CONTROL */ -#define CTRL_BASE (OMAP54XX_L4_CORE_BASE + 0x2000) -#define CONTROL_PADCONF_CORE (CTRL_BASE + 0x0800) -#define CONTROL_PADCONF_WKUP (OMAP54XX_L4_WKUP_BASE + 0xc800) - -/* LPDDR2 IO regs. To be verified */ -#define LPDDR2_IO_REGS_BASE 0x4A100638 - -/* CONTROL_ID_CODE */ -#define CONTROL_ID_CODE (CTRL_BASE + 0x204) +/* CONTROL ID CODE */ +#define CONTROL_CORE_ID_CODE 0x4A002204 +#define CONTROL_WKUP_ID_CODE 0x4AE0C204 + +#ifdef CONFIG_DRA7XX +#define CONTROL_ID_CODE CONTROL_WKUP_ID_CODE +#else +#define CONTROL_ID_CODE CONTROL_CORE_ID_CODE +#endif /* To be verified */ #define OMAP5430_CONTROL_ID_CODE_ES1_0 0x0B94202F @@ -62,11 +61,6 @@ #define OMAP5432_CONTROL_ID_CODE_ES2_0 0x1B99802F #define DRA752_CONTROL_ID_CODE_ES1_0 0x0B99002F -/* STD_FUSE_PROD_ID_1 */ -#define STD_FUSE_PROD_ID_1 (CTRL_BASE + 0x218) -#define PROD_ID_1_SILICON_TYPE_SHIFT 16 -#define PROD_ID_1_SILICON_TYPE_MASK (3 << 16) - /* UART */ #define UART1_BASE (OMAP54XX_L4_PER_BASE + 0x6a000) #define UART2_BASE (OMAP54XX_L4_PER_BASE + 0x6c000) @@ -80,15 +74,9 @@ /* Watchdog Timer2 - MPU watchdog */ #define WDT2_BASE (OMAP54XX_L4_WKUP_BASE + 0x14000) -/* 32KTIMER */ -#define SYNC_32KTIMER_BASE (OMAP54XX_L4_WKUP_BASE + 0x4000) - /* GPMC */ #define OMAP54XX_GPMC_BASE 0x50000000 -/* SYSTEM CONTROL MODULE */ -#define SYSCTRL_GENERAL_CORE_BASE 0x4A002000 - /* * Hardware Register Details */ @@ -118,9 +106,9 @@ /* CONTROL_EFUSE_2 */ #define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000 +#define SDCARD_BIAS_PWRDNZ (1 << 27) #define SDCARD_PWRDNZ (1 << 26) #define SDCARD_BIAS_HIZ_MODE (1 << 25) -#define SDCARD_BIAS_PWRDNZ (1 << 22) #define SDCARD_PBIASLITE_VMODE (1 << 21) #ifndef __ASSEMBLY__ @@ -181,26 +169,17 @@ struct s32ktimer { #define EFUSE_4 0x45145100 #endif /* __ASSEMBLY__ */ -/* - * Non-secure SRAM Addresses - * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE - * at 0x40304000(EMU base) so that our code works for both EMU and GP - */ +#ifdef CONFIG_DRA7XX +#define NON_SECURE_SRAM_START 0x40300000 +#define NON_SECURE_SRAM_END 0x40380000 /* Not inclusive */ +#else #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */ +#endif + /* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4031F000 -/* Silicon revisions */ -#define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF -#define OMAP4430_ES1_0 0x44300100 -#define OMAP4430_ES2_0 0x44300200 -#define OMAP4430_ES2_1 0x44300210 -#define OMAP4430_ES2_2 0x44300220 -#define OMAP4430_ES2_3 0x44300230 -#define OMAP4460_ES1_0 0x44600100 -#define OMAP4460_ES1_1 0x44600110 - /* CONTROL_SRCOMP_XXX_SIDE */ #define OVERRIDE_XS_SHIFT 30 #define OVERRIDE_XS_MASK (1 << 30) @@ -215,6 +194,19 @@ struct s32ktimer { #define SRCODE_OVERRIDE_SEL_XS_SHIFT 0 #define SRCODE_OVERRIDE_SEL_XS_MASK (1 << 0) +/* ABB settings */ +#define OMAP_ABB_SETTLING_TIME 50 +#define OMAP_ABB_CLOCK_CYCLES 16 + +/* ABB tranxdone mask */ +#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7) + +/* ABB efuse masks */ +#define OMAP5_ABB_FUSE_VSET_MASK (0x1F << 24) +#define OMAP5_ABB_FUSE_ENABLE_MASK (0x1 << 29) +#define OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK (0x1 << 10) +#define OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK (0x1f << 0) + #ifndef __ASSEMBLY__ struct srcomp_params { s8 divide_factor; @@ -229,6 +221,7 @@ struct ctrl_ioregs { u32 ctrl_ddrio_1; u32 ctrl_ddrio_2; u32 ctrl_emif_sdram_config_ext; + u32 ctrl_ddr_ctrl_ext_0; }; #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index 4d99db9b7d..0bb59d869b 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -23,9 +23,9 @@ #include <asm/arch/omap.h> #include <asm/io.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/omap_common.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> DECLARE_GLOBAL_DATA_PTR; @@ -61,7 +61,8 @@ u32 cortex_rev(void); void save_omap_boot_params(void); void init_omap_revision(void); void do_io_settings(void); -void omap_vc_init(u16 speed_khz); +void sri2c_init(void); +void gpi2c_init(void); int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data); u32 warm_reset(void); void force_emif_self_refresh(void); diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h index 5f11d7b72e..1b94a99c54 100644 --- a/arch/arm/include/asm/emif.h +++ b/arch/arm/include/asm/emif.h @@ -581,7 +581,7 @@ (0xFF << EMIF_SYS_ADDR_SHIFT)) #define EMIF_EXT_PHY_CTRL_TIMING_REG 0x5 -#define EMIF_EXT_PHY_CTRL_CONST_REG 0x13 +#define EMIF_EXT_PHY_CTRL_CONST_REG 0x14 /* Reg mapping structure */ struct emif_reg_struct { @@ -855,13 +855,10 @@ struct dmm_lisa_map_regs { #define DPD_ENABLE 1 /* Maximum delay before Low Power Modes */ -#ifndef CONFIG_OMAP54XX -#define REG_CS_TIM 0xF -#else #define REG_CS_TIM 0x0 -#endif -#define REG_SR_TIM 0xF -#define REG_PD_TIM 0xF +#define REG_SR_TIM 0x0 +#define REG_PD_TIM 0x0 + /* EMIF_PWR_MGMT_CTRL register */ #define EMIF_PWR_MGMT_CTRL (\ @@ -1113,6 +1110,7 @@ struct emif_regs { u32 freq; u32 sdram_config_init; u32 sdram_config; + u32 sdram_config2; u32 ref_ctrl; u32 sdram_tim1; u32 sdram_tim2; diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index ee7b188d3a..787e614ecb 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -29,7 +29,7 @@ #include <common.h> -#define NUM_SYS_CLKS 8 +#define NUM_SYS_CLKS 7 struct prcm_regs { /* cm1.ckgen */ @@ -242,6 +242,8 @@ struct prcm_regs { u32 cm_l3init_fsusb_clkctrl; u32 cm_l3init_ocp2scp1_clkctrl; + u32 prm_irqstatus_mpu_2; + /* cm2.l4per */ u32 cm_l4per_clkstctrl; u32 cm_l4per_dynamicdep; @@ -301,6 +303,7 @@ struct prcm_regs { /* l4 wkup regs */ u32 cm_abe_pll_ref_clksel; u32 cm_sys_clksel; + u32 cm_abe_pll_sys_clksel; u32 cm_wkup_clkstctrl; u32 cm_wkup_l4wkup_clkctrl; u32 cm_wkup_wdtimer1_clkctrl; @@ -328,6 +331,8 @@ struct prcm_regs { u32 prm_sldo_mpu_ctrl; u32 prm_sldo_mm_setup; u32 prm_sldo_mm_ctrl; + u32 prm_abbldo_mpu_setup; + u32 prm_abbldo_mpu_ctrl; u32 cm_div_m4_dpll_core; u32 cm_div_m5_dpll_core; @@ -346,10 +351,15 @@ struct prcm_regs { u32 cm_l3init_usbphy_clkctrl; u32 cm_l4per_mcbsp4_clkctrl; u32 prm_vc_cfg_channel; + + /* SCRM stuff, used by some boards */ + u32 scrm_auxclk0; + u32 scrm_auxclk1; }; struct omap_sys_ctrl_regs { u32 control_status; + u32 control_std_fuse_opp_vdd_mpu_2; u32 control_core_mmr_lock1; u32 control_core_mmr_lock2; u32 control_core_mmr_lock3; @@ -362,6 +372,7 @@ struct omap_sys_ctrl_regs { u32 control_ldosram_iva_voltage_ctrl; u32 control_ldosram_mpu_voltage_ctrl; u32 control_ldosram_core_voltage_ctrl; + u32 control_usbotghs_ctrl; u32 control_padconf_core_base; u32 control_paconf_global; u32 control_paconf_mode; @@ -394,6 +405,7 @@ struct omap_sys_ctrl_regs { u32 control_ddrio_0; u32 control_ddrio_1; u32 control_ddrio_2; + u32 control_ddr_control_ext_0; u32 control_lpddr2io1_0; u32 control_lpddr2io1_1; u32 control_lpddr2io1_2; @@ -419,6 +431,7 @@ struct omap_sys_ctrl_regs { u32 control_port_emif2_sdram_config; u32 control_emif1_sdram_config_ext; u32 control_emif2_sdram_config_ext; + u32 control_wkup_ldovbb_mpu_voltage_ctrl; u32 control_smart1nopmio_padconf_0; u32 control_smart1nopmio_padconf_1; u32 control_padconf_mode; @@ -494,11 +507,25 @@ struct pmic_data { u32 start_code; unsigned gpio; int gpio_en; + u32 i2c_slave_addr; + void (*pmic_bus_init)(void); + int (*pmic_write)(u8 sa, u8 reg_addr, u8 reg_data); +}; + +/** + * struct volts_efuse_data - efuse definition for voltage + * @reg: register address for efuse + * @reg_bits: Number of bits in a register address, mandatory. + */ +struct volts_efuse_data { + u32 reg; + u8 reg_bits; }; struct volts { u32 value; u32 addr; + struct volts_efuse_data efuse; struct pmic_data *pmic; }; @@ -506,6 +533,9 @@ struct vcores_data { struct volts mpu; struct volts core; struct volts mm; + struct volts gpu; + struct volts eve; + struct volts iva; }; extern struct prcm_regs const **prcm; @@ -545,9 +575,9 @@ void enable_non_essential_clocks(void); void scale_vcores(struct vcores_data const *); u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic); void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic); - -/* Max value for DPLL multiplier M */ -#define OMAP_DPLL_MAX_N 127 +void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control, + u32 txdone, u32 txdone_mask, u32 opp); +s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb); /* HW Init Context */ #define OMAP_INIT_CONTEXT_SPL 0 @@ -555,11 +585,32 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic); #define OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL 2 #define OMAP_INIT_CONTEXT_UBOOT_AFTER_CH 3 +/* ABB */ +#define OMAP_ABB_NOMINAL_OPP 0 +#define OMAP_ABB_FAST_OPP 1 +#define OMAP_ABB_SLOW_OPP 3 +#define OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK (0x1 << 0) +#define OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK (0x1 << 1) +#define OMAP_ABB_CONTROL_OPP_CHANGE_MASK (0x1 << 2) +#define OMAP_ABB_CONTROL_SR2_IN_TRANSITION_MASK (0x1 << 6) +#define OMAP_ABB_SETUP_SR2EN_MASK (0x1 << 0) +#define OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK (0x1 << 2) +#define OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK (0x1 << 1) +#define OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK (0xff << 8) + static inline u32 omap_revision(void) { extern u32 *const omap_si_rev; return *omap_si_rev; } + +#define OMAP54xx 0x54000000 + +static inline u8 is_omap54xx(void) +{ + extern u32 *const omap_si_rev; + return ((*omap_si_rev & 0xFF000000) == OMAP54xx); +} #endif /* |