diff options
Diffstat (limited to 'arch/arm/include')
18 files changed, 1217 insertions, 74 deletions
diff --git a/arch/arm/include/asm/arch-davinci/da850_lowlevel.h b/arch/arm/include/asm/arch-davinci/da850_lowlevel.h index 7f9c3f6bce..45a325c123 100644 --- a/arch/arm/include/asm/arch-davinci/da850_lowlevel.h +++ b/arch/arm/include/asm/arch-davinci/da850_lowlevel.h @@ -26,11 +26,8 @@ extern const int lpsc_size; #define dv_maskbits(addr, val) \ writel((readl(addr) & val), addr) -void da850_waitloop(unsigned long loopcnt); -int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult); void da850_lpc_transition(unsigned char pscnum, unsigned char module, unsigned char domain, unsigned char state); -int da850_ddr_setup(void); void da850_psc_init(void); void da850_pinmux_ctl(unsigned long offset, unsigned long mask, unsigned long value); diff --git a/arch/arm/include/asm/arch-davinci/i2c_defs.h b/arch/arm/include/asm/arch-davinci/i2c_defs.h index c388dc0024..06da8947b4 100644 --- a/arch/arm/include/asm/arch-davinci/i2c_defs.h +++ b/arch/arm/include/asm/arch-davinci/i2c_defs.h @@ -1,16 +1,13 @@ /* - * (C) Copyright 2004 + * (C) Copyright 2004-2014 * Texas Instruments, <www.ti.com> * * Some changes copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> * * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef _DAVINCI_I2C_H_ -#define _DAVINCI_I2C_H_ - -#define I2C_WRITE 0 -#define I2C_READ 1 +#ifndef _I2C_DEFS_H_ +#define _I2C_DEFS_H_ #ifndef CONFIG_SOC_DA8XX #define I2C_BASE 0x01c21000 @@ -18,66 +15,4 @@ #define I2C_BASE 0x01c22000 #endif -#define I2C_OA (I2C_BASE + 0x00) -#define I2C_IE (I2C_BASE + 0x04) -#define I2C_STAT (I2C_BASE + 0x08) -#define I2C_SCLL (I2C_BASE + 0x0c) -#define I2C_SCLH (I2C_BASE + 0x10) -#define I2C_CNT (I2C_BASE + 0x14) -#define I2C_DRR (I2C_BASE + 0x18) -#define I2C_SA (I2C_BASE + 0x1c) -#define I2C_DXR (I2C_BASE + 0x20) -#define I2C_CON (I2C_BASE + 0x24) -#define I2C_IV (I2C_BASE + 0x28) -#define I2C_PSC (I2C_BASE + 0x30) - -/* I2C masks */ - -/* I2C Interrupt Enable Register (I2C_IE): */ -#define I2C_IE_SCD_IE (1 << 5) /* Stop condition detect interrupt enable */ -#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */ -#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */ -#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */ -#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */ -#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */ - -/* I2C Status Register (I2C_STAT): */ - -#define I2C_STAT_BB (1 << 12) /* Bus busy */ -#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */ -#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ -#define I2C_STAT_AAS (1 << 9) /* Address as slave */ -#define I2C_STAT_SCD (1 << 5) /* Stop condition detect */ -#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */ -#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */ -#define I2C_STAT_ARDY (1 << 2) /* Register access ready */ -#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */ -#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */ - - -/* I2C Interrupt Code Register (I2C_INTCODE): */ - -#define I2C_INTCODE_MASK 7 -#define I2C_INTCODE_NONE 0 -#define I2C_INTCODE_AL 1 /* Arbitration lost */ -#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */ -#define I2C_INTCODE_ARDY 3 /* Register access ready */ -#define I2C_INTCODE_RRDY 4 /* Rcv data ready */ -#define I2C_INTCODE_XRDY 5 /* Xmit data ready */ -#define I2C_INTCODE_SCD 6 /* Stop condition detect */ - - -/* I2C Configuration Register (I2C_CON): */ - -#define I2C_CON_EN (1 << 5) /* I2C module enable */ -#define I2C_CON_STB (1 << 4) /* Start byte mode (master mode only) */ -#define I2C_CON_MST (1 << 10) /* Master/slave mode */ -#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode (master mode only) */ -#define I2C_CON_XA (1 << 8) /* Expand address */ -#define I2C_CON_STP (1 << 11) /* Stop condition (master mode only) */ -#define I2C_CON_STT (1 << 13) /* Start condition (master mode only) */ -#define I2C_CON_FREE (1 << 14) /* Free run on emulation */ - -#define I2C_TIMEOUT 0xffff0000 /* Timeout mask for poll_i2c_irq() */ - #endif diff --git a/arch/arm/include/asm/arch-keystone/clock-k2hk.h b/arch/arm/include/asm/arch-keystone/clock-k2hk.h new file mode 100644 index 0000000000..6a69a8d2be --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/clock-k2hk.h @@ -0,0 +1,109 @@ +/* + * K2HK: Clock management APIs + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_CLOCK_K2HK_H +#define __ASM_ARCH_CLOCK_K2HK_H + +#include <asm/arch/hardware.h> + +#ifndef __ASSEMBLY__ + +enum ext_clk_e { + sys_clk, + alt_core_clk, + pa_clk, + tetris_clk, + ddr3a_clk, + ddr3b_clk, + mcm_clk, + pcie_clk, + sgmii_srio_clk, + xgmii_clk, + usb_clk, + rp1_clk, + ext_clk_count /* number of external clocks */ +}; + +extern unsigned int external_clk[ext_clk_count]; + +enum clk_e { + core_pll_clk, + pass_pll_clk, + tetris_pll_clk, + ddr3a_pll_clk, + ddr3b_pll_clk, + sys_clk0_clk, + sys_clk0_1_clk, + sys_clk0_2_clk, + sys_clk0_3_clk, + sys_clk0_4_clk, + sys_clk0_6_clk, + sys_clk0_8_clk, + sys_clk0_12_clk, + sys_clk0_24_clk, + sys_clk1_clk, + sys_clk1_3_clk, + sys_clk1_4_clk, + sys_clk1_6_clk, + sys_clk1_12_clk, + sys_clk2_clk, + sys_clk3_clk +}; + +#define K2HK_CLK1_6 sys_clk0_6_clk + +/* PLL identifiers */ +enum pll_type_e { + CORE_PLL, + PASS_PLL, + TETRIS_PLL, + DDR3A_PLL, + DDR3B_PLL, +}; +#define MAIN_PLL CORE_PLL + +/* PLL configuration data */ +struct pll_init_data { + int pll; + int pll_m; /* PLL Multiplier */ + int pll_d; /* PLL divider */ + int pll_od; /* PLL output divider */ +}; + +#define CORE_PLL_799 {CORE_PLL, 13, 1, 2} +#define CORE_PLL_983 {CORE_PLL, 16, 1, 2} +#define CORE_PLL_1167 {CORE_PLL, 19, 1, 2} +#define CORE_PLL_1228 {CORE_PLL, 20, 1, 2} +#define PASS_PLL_1228 {PASS_PLL, 20, 1, 2} +#define PASS_PLL_983 {PASS_PLL, 16, 1, 2} +#define PASS_PLL_1050 {PASS_PLL, 205, 12, 2} +#define TETRIS_PLL_500 {TETRIS_PLL, 8, 1, 2} +#define TETRIS_PLL_750 {TETRIS_PLL, 12, 1, 2} +#define TETRIS_PLL_687 {TETRIS_PLL, 11, 1, 2} +#define TETRIS_PLL_625 {TETRIS_PLL, 10, 1, 2} +#define TETRIS_PLL_812 {TETRIS_PLL, 13, 1, 2} +#define TETRIS_PLL_875 {TETRIS_PLL, 14, 1, 2} +#define TETRIS_PLL_1188 {TETRIS_PLL, 19, 2, 1} +#define TETRIS_PLL_1200 {TETRIS_PLL, 48, 5, 1} +#define TETRIS_PLL_1375 {TETRIS_PLL, 22, 2, 1} +#define TETRIS_PLL_1400 {TETRIS_PLL, 56, 5, 1} +#define DDR3_PLL_200(x) {DDR3##x##_PLL, 4, 1, 2} +#define DDR3_PLL_400(x) {DDR3##x##_PLL, 16, 1, 4} +#define DDR3_PLL_800(x) {DDR3##x##_PLL, 16, 1, 2} +#define DDR3_PLL_333(x) {DDR3##x##_PLL, 20, 1, 6} + +void init_plls(int num_pll, struct pll_init_data *config); +void init_pll(const struct pll_init_data *data); +unsigned long clk_get_rate(unsigned int clk); +unsigned long clk_round_rate(unsigned int clk, unsigned long hz); +int clk_set_rate(unsigned int clk, unsigned long hz); + +#endif + +#endif diff --git a/arch/arm/include/asm/arch-keystone/clock.h b/arch/arm/include/asm/arch-keystone/clock.h new file mode 100644 index 0000000000..324501b75a --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/clock.h @@ -0,0 +1,17 @@ +/* + * keystone2: common clock header file + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_CLOCK_H +#define __ASM_ARCH_CLOCK_H + +#ifdef CONFIG_SOC_K2HK +#include <asm/arch/clock-k2hk.h> +#endif + +#endif diff --git a/arch/arm/include/asm/arch-keystone/clock_defs.h b/arch/arm/include/asm/arch-keystone/clock_defs.h new file mode 100644 index 0000000000..b251aff383 --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/clock_defs.h @@ -0,0 +1,111 @@ +/* + * keystone2: common pll clock definitions + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CLOCK_DEFS_H_ +#define _CLOCK_DEFS_H_ + +#include <asm/arch/hardware.h> + +#define BIT(x) (1 << (x)) + +/* PLL Control Registers */ +struct pllctl_regs { + u32 ctl; /* 00 */ + u32 ocsel; /* 04 */ + u32 secctl; /* 08 */ + u32 resv0; + u32 mult; /* 10 */ + u32 prediv; /* 14 */ + u32 div1; /* 18 */ + u32 div2; /* 1c */ + u32 div3; /* 20 */ + u32 oscdiv1; /* 24 */ + u32 resv1; /* 28 */ + u32 bpdiv; /* 2c */ + u32 wakeup; /* 30 */ + u32 resv2; + u32 cmd; /* 38 */ + u32 stat; /* 3c */ + u32 alnctl; /* 40 */ + u32 dchange; /* 44 */ + u32 cken; /* 48 */ + u32 ckstat; /* 4c */ + u32 systat; /* 50 */ + u32 ckctl; /* 54 */ + u32 resv3[2]; + u32 div4; /* 60 */ + u32 div5; /* 64 */ + u32 div6; /* 68 */ + u32 div7; /* 6c */ + u32 div8; /* 70 */ + u32 div9; /* 74 */ + u32 div10; /* 78 */ + u32 div11; /* 7c */ + u32 div12; /* 80 */ +}; + +static struct pllctl_regs *pllctl_regs[] = { + (struct pllctl_regs *)(CLOCK_BASE + 0x100) +}; + +#define pllctl_reg(pll, reg) (&(pllctl_regs[pll]->reg)) +#define pllctl_reg_read(pll, reg) __raw_readl(pllctl_reg(pll, reg)) +#define pllctl_reg_write(pll, reg, val) __raw_writel(val, pllctl_reg(pll, reg)) + +#define pllctl_reg_rmw(pll, reg, mask, val) \ + pllctl_reg_write(pll, reg, \ + (pllctl_reg_read(pll, reg) & ~(mask)) | val) + +#define pllctl_reg_setbits(pll, reg, mask) \ + pllctl_reg_rmw(pll, reg, 0, mask) + +#define pllctl_reg_clrbits(pll, reg, mask) \ + pllctl_reg_rmw(pll, reg, mask, 0) + +#define pll0div_read(N) ((pllctl_reg_read(CORE_PLL, div##N) & 0xff) + 1) + +/* PLLCTL Bits */ +#define PLLCTL_BYPASS BIT(23) +#define PLL_PLLRST BIT(14) +#define PLLCTL_PAPLL BIT(13) +#define PLLCTL_CLKMODE BIT(8) +#define PLLCTL_PLLSELB BIT(7) +#define PLLCTL_ENSAT BIT(6) +#define PLLCTL_PLLENSRC BIT(5) +#define PLLCTL_PLLDIS BIT(4) +#define PLLCTL_PLLRST BIT(3) +#define PLLCTL_PLLPWRDN BIT(1) +#define PLLCTL_PLLEN BIT(0) +#define PLLSTAT_GO BIT(0) + +#define MAIN_ENSAT_OFFSET 6 + +#define PLLDIV_ENABLE BIT(15) + +#define PLL_DIV_MASK 0x3f +#define PLL_MULT_MASK 0x1fff +#define PLL_MULT_SHIFT 6 +#define PLLM_MULT_HI_MASK 0x7f +#define PLLM_MULT_HI_SHIFT 12 +#define PLLM_MULT_HI_SMASK (PLLM_MULT_HI_MASK << PLLM_MULT_HI_SHIFT) +#define PLLM_MULT_LO_MASK 0x3f +#define PLL_CLKOD_MASK 0xf +#define PLL_CLKOD_SHIFT 19 +#define PLL_CLKOD_SMASK (PLL_CLKOD_MASK << PLL_CLKOD_SHIFT) +#define PLL_BWADJ_LO_MASK 0xff +#define PLL_BWADJ_LO_SHIFT 24 +#define PLL_BWADJ_LO_SMASK (PLL_BWADJ_LO_MASK << PLL_BWADJ_LO_SHIFT) +#define PLL_BWADJ_HI_MASK 0xf + +#define PLLM_RATIO_DIV1 (PLLDIV_ENABLE | 0) +#define PLLM_RATIO_DIV2 (PLLDIV_ENABLE | 0) +#define PLLM_RATIO_DIV3 (PLLDIV_ENABLE | 1) +#define PLLM_RATIO_DIV4 (PLLDIV_ENABLE | 4) +#define PLLM_RATIO_DIV5 (PLLDIV_ENABLE | 17) + +#endif /* _CLOCK_DEFS_H_ */ diff --git a/arch/arm/include/asm/arch-keystone/emac_defs.h b/arch/arm/include/asm/arch-keystone/emac_defs.h new file mode 100644 index 0000000000..0aa2f89d78 --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/emac_defs.h @@ -0,0 +1,240 @@ +/* + * emac definitions for keystone2 devices + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _EMAC_DEFS_H_ +#define _EMAC_DEFS_H_ + +#include <asm/arch/hardware.h> +#include <asm/io.h> + +#define DEVICE_REG32_R(a) readl(a) +#define DEVICE_REG32_W(a, v) writel(v, a) + +#define EMAC_EMACSL_BASE_ADDR (KS2_PASS_BASE + 0x00090900) +#define EMAC_MDIO_BASE_ADDR (KS2_PASS_BASE + 0x00090300) +#define EMAC_SGMII_BASE_ADDR (KS2_PASS_BASE + 0x00090100) + +#define KEYSTONE2_EMAC_GIG_ENABLE + +#define MAC_ID_BASE_ADDR (KS2_DEVICE_STATE_CTRL_BASE + 0x110) + +#ifdef CONFIG_SOC_K2HK +/* MDIO module input frequency */ +#define EMAC_MDIO_BUS_FREQ (clk_get_rate(pass_pll_clk)) +/* MDIO clock output frequency */ +#define EMAC_MDIO_CLOCK_FREQ 1000000 /* 1.0 MHz */ +#endif + +/* MII Status Register */ +#define MII_STATUS_REG 1 +#define MII_STATUS_LINK_MASK (0x4) + +/* Marvell 88E1111 PHY ID */ +#define PHY_MARVELL_88E1111 (0x01410cc0) + +#define MDIO_CONTROL_IDLE (0x80000000) +#define MDIO_CONTROL_ENABLE (0x40000000) +#define MDIO_CONTROL_FAULT_ENABLE (0x40000) +#define MDIO_CONTROL_FAULT (0x80000) +#define MDIO_USERACCESS0_GO (0x80000000) +#define MDIO_USERACCESS0_WRITE_READ (0x0) +#define MDIO_USERACCESS0_WRITE_WRITE (0x40000000) +#define MDIO_USERACCESS0_ACK (0x20000000) + +#define EMAC_MACCONTROL_MIIEN_ENABLE (0x20) +#define EMAC_MACCONTROL_FULLDUPLEX_ENABLE (0x1) +#define EMAC_MACCONTROL_GIGABIT_ENABLE (1 << 7) +#define EMAC_MACCONTROL_GIGFORCE (1 << 17) +#define EMAC_MACCONTROL_RMIISPEED_100 (1 << 15) + +#define EMAC_MIN_ETHERNET_PKT_SIZE 60 + +struct mac_sl_cfg { + u_int32_t max_rx_len; /* Maximum receive packet length. */ + u_int32_t ctl; /* Control bitfield */ +}; + +/* + * Definition: Control bitfields used in the ctl field of hwGmacSlCfg_t + */ +#define GMACSL_RX_ENABLE_RCV_CONTROL_FRAMES (1 << 24) +#define GMACSL_RX_ENABLE_RCV_SHORT_FRAMES (1 << 23) +#define GMACSL_RX_ENABLE_RCV_ERROR_FRAMES (1 << 22) +#define GMACSL_RX_ENABLE_EXT_CTL (1 << 18) +#define GMACSL_RX_ENABLE_GIG_FORCE (1 << 17) +#define GMACSL_RX_ENABLE_IFCTL_B (1 << 16) +#define GMACSL_RX_ENABLE_IFCTL_A (1 << 15) +#define GMACSL_RX_ENABLE_CMD_IDLE (1 << 11) +#define GMACSL_TX_ENABLE_SHORT_GAP (1 << 10) +#define GMACSL_ENABLE_GIG_MODE (1 << 7) +#define GMACSL_TX_ENABLE_PACE (1 << 6) +#define GMACSL_ENABLE (1 << 5) +#define GMACSL_TX_ENABLE_FLOW_CTL (1 << 4) +#define GMACSL_RX_ENABLE_FLOW_CTL (1 << 3) +#define GMACSL_ENABLE_LOOPBACK (1 << 1) +#define GMACSL_ENABLE_FULL_DUPLEX (1 << 0) + +/* + * DEFINTITION: function return values + */ +#define GMACSL_RET_OK 0 +#define GMACSL_RET_INVALID_PORT -1 +#define GMACSL_RET_WARN_RESET_INCOMPLETE -2 +#define GMACSL_RET_WARN_MAXLEN_TOO_BIG -3 +#define GMACSL_RET_CONFIG_FAIL_RESET_ACTIVE -4 + +/* Register offsets */ +#define CPGMACSL_REG_ID 0x00 +#define CPGMACSL_REG_CTL 0x04 +#define CPGMACSL_REG_STATUS 0x08 +#define CPGMACSL_REG_RESET 0x0c +#define CPGMACSL_REG_MAXLEN 0x10 +#define CPGMACSL_REG_BOFF 0x14 +#define CPGMACSL_REG_RX_PAUSE 0x18 +#define CPGMACSL_REG_TX_PAURSE 0x1c +#define CPGMACSL_REG_EM_CTL 0x20 +#define CPGMACSL_REG_PRI 0x24 + +/* Soft reset register values */ +#define CPGMAC_REG_RESET_VAL_RESET_MASK (1 << 0) +#define CPGMAC_REG_RESET_VAL_RESET (1 << 0) + +/* Maxlen register values */ +#define CPGMAC_REG_MAXLEN_LEN 0x3fff + +/* Control bitfields */ +#define CPSW_CTL_P2_PASS_PRI_TAGGED (1 << 5) +#define CPSW_CTL_P1_PASS_PRI_TAGGED (1 << 4) +#define CPSW_CTL_P0_PASS_PRI_TAGGED (1 << 3) +#define CPSW_CTL_P0_ENABLE (1 << 2) +#define CPSW_CTL_VLAN_AWARE (1 << 1) +#define CPSW_CTL_FIFO_LOOPBACK (1 << 0) + +#define DEVICE_CPSW_NUM_PORTS 5 /* 5 switch ports */ +#define DEVICE_CPSW_BASE (0x02090800) +#define target_get_switch_ctl() CPSW_CTL_P0_ENABLE /* Enable port 0 */ +#define SWITCH_MAX_PKT_SIZE 9000 + +/* Register offsets */ +#define CPSW_REG_CTL 0x004 +#define CPSW_REG_STAT_PORT_EN 0x00c +#define CPSW_REG_MAXLEN 0x040 +#define CPSW_REG_ALE_CONTROL 0x608 +#define CPSW_REG_ALE_PORTCTL(x) (0x640 + (x)*4) + +/* Register values */ +#define CPSW_REG_VAL_STAT_ENABLE_ALL 0xf +#define CPSW_REG_VAL_ALE_CTL_RESET_AND_ENABLE ((u_int32_t)0xc0000000) +#define CPSW_REG_VAL_ALE_CTL_BYPASS ((u_int32_t)0x00000010) +#define CPSW_REG_VAL_PORTCTL_FORWARD_MODE 0x3 + +#define SGMII_REG_STATUS_LOCK BIT(4) +#define SGMII_REG_STATUS_LINK BIT(0) +#define SGMII_REG_STATUS_AUTONEG BIT(2) +#define SGMII_REG_CONTROL_AUTONEG BIT(0) +#define SGMII_REG_CONTROL_MASTER BIT(5) +#define SGMII_REG_MR_ADV_ENABLE BIT(0) +#define SGMII_REG_MR_ADV_LINK BIT(15) +#define SGMII_REG_MR_ADV_FULL_DUPLEX BIT(12) +#define SGMII_REG_MR_ADV_GIG_MODE BIT(11) + +#define SGMII_LINK_MAC_MAC_AUTONEG 0 +#define SGMII_LINK_MAC_PHY 1 +#define SGMII_LINK_MAC_MAC_FORCED 2 +#define SGMII_LINK_MAC_FIBER 3 +#define SGMII_LINK_MAC_PHY_FORCED 4 + +#define TARGET_SGMII_BASE KS2_PASS_BASE + 0x00090100 +#define TARGET_SGMII_BASE_ADDRESSES {KS2_PASS_BASE + 0x00090100, \ + KS2_PASS_BASE + 0x00090200, \ + KS2_PASS_BASE + 0x00090400, \ + KS2_PASS_BASE + 0x00090500} + +#define SGMII_OFFSET(x) ((x <= 1) ? (x * 0x100) : ((x * 0x100) + 0x100)) + +/* + * SGMII registers + */ +#define SGMII_IDVER_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x000) +#define SGMII_SRESET_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x004) +#define SGMII_CTL_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x010) +#define SGMII_STATUS_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x014) +#define SGMII_MRADV_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x018) +#define SGMII_LPADV_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x020) +#define SGMII_TXCFG_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x030) +#define SGMII_RXCFG_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x034) +#define SGMII_AUXCFG_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x038) + +#define DEVICE_EMACSL_BASE(x) (KS2_PASS_BASE + 0x00090900 + (x) * 0x040) +#define DEVICE_N_GMACSL_PORTS 4 +#define DEVICE_EMACSL_RESET_POLL_COUNT 100 + +#define DEVICE_PSTREAM_CFG_REG_ADDR (KS2_PASS_BASE + 0x604) + +#ifdef CONFIG_SOC_K2HK +#define DEVICE_PSTREAM_CFG_REG_VAL_ROUTE_CPPI 0x06060606 +#endif + +#define hw_config_streaming_switch() \ + DEVICE_REG32_W(DEVICE_PSTREAM_CFG_REG_ADDR, \ + DEVICE_PSTREAM_CFG_REG_VAL_ROUTE_CPPI); + +/* EMAC MDIO Registers Structure */ +struct mdio_regs { + dv_reg version; + dv_reg control; + dv_reg alive; + dv_reg link; + dv_reg linkintraw; + dv_reg linkintmasked; + u_int8_t rsvd0[8]; + dv_reg userintraw; + dv_reg userintmasked; + dv_reg userintmaskset; + dv_reg userintmaskclear; + u_int8_t rsvd1[80]; + dv_reg useraccess0; + dv_reg userphysel0; + dv_reg useraccess1; + dv_reg userphysel1; +}; + +/* Ethernet MAC Registers Structure */ +struct emac_regs { + dv_reg idver; + dv_reg maccontrol; + dv_reg macstatus; + dv_reg soft_reset; + dv_reg rx_maxlen; + u32 rsvd0; + dv_reg rx_pause; + dv_reg tx_pause; + dv_reg emcontrol; + dv_reg pri_map; + u32 rsvd1[6]; +}; + +#define SGMII_ACCESS(port, reg) \ + *((volatile unsigned int *)(sgmiis[port] + reg)) + +struct eth_priv_t { + char int_name[32]; + int rx_flow; + int phy_addr; + int slave_port; + int sgmii_link_type; +}; + +extern struct eth_priv_t eth_priv_cfg[]; + +int keystone2_emac_initialize(struct eth_priv_t *eth_priv); +void sgmii_serdes_setup_156p25mhz(void); +void sgmii_serdes_shutdown(void); + +#endif /* _EMAC_DEFS_H_ */ diff --git a/arch/arm/include/asm/arch-keystone/emif_defs.h b/arch/arm/include/asm/arch-keystone/emif_defs.h new file mode 100644 index 0000000000..a3378aa30e --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/emif_defs.h @@ -0,0 +1,73 @@ +/* + * emif definitions to re-use davinci emif driver on Keystone2 + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * (C) Copyright 2007 Sergey Kubushyn <ksi@koi8.net> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _EMIF_DEFS_H_ +#define _EMIF_DEFS_H_ + +#include <asm/arch/hardware.h> + +struct davinci_emif_regs { + uint32_t ercsr; + uint32_t awccr; + uint32_t sdbcr; + uint32_t sdrcr; + uint32_t abncr[4]; + uint32_t sdtimr; + uint32_t ddrsr; + uint32_t ddrphycr; + uint32_t ddrphysr; + uint32_t totar; + uint32_t totactr; + uint32_t ddrphyid_rev; + uint32_t sdsretr; + uint32_t eirr; + uint32_t eimr; + uint32_t eimsr; + uint32_t eimcr; + uint32_t ioctrlr; + uint32_t iostatr; + uint32_t rsvd0; + uint32_t one_nand_cr; + uint32_t nandfcr; + uint32_t nandfsr; + uint32_t rsvd1[2]; + uint32_t nandfecc[4]; + uint32_t rsvd2[15]; + uint32_t nand4biteccload; + uint32_t nand4bitecc[4]; + uint32_t nanderradd1; + uint32_t nanderradd2; + uint32_t nanderrval1; + uint32_t nanderrval2; +}; + +#define davinci_emif_regs \ + ((struct davinci_emif_regs *)DAVINCI_ASYNC_EMIF_CNTRL_BASE) + +#define DAVINCI_NANDFCR_NAND_ENABLE(n) (1 << ((n) - 2)) +#define DAVINCI_NANDFCR_4BIT_ECC_SEL_MASK (3 << 4) +#define DAVINCI_NANDFCR_4BIT_ECC_SEL(n) (((n) - 2) << 4) +#define DAVINCI_NANDFCR_1BIT_ECC_START(n) (1 << (8 + ((n) - 2))) +#define DAVINCI_NANDFCR_4BIT_ECC_START (1 << 12) +#define DAVINCI_NANDFCR_4BIT_CALC_START (1 << 13) + +/* Chip Select setup */ +#define DAVINCI_ABCR_STROBE_SELECT (1 << 31) +#define DAVINCI_ABCR_EXT_WAIT (1 << 30) +#define DAVINCI_ABCR_WSETUP(n) ((n) << 26) +#define DAVINCI_ABCR_WSTROBE(n) ((n) << 20) +#define DAVINCI_ABCR_WHOLD(n) ((n) << 17) +#define DAVINCI_ABCR_RSETUP(n) ((n) << 13) +#define DAVINCI_ABCR_RSTROBE(n) ((n) << 7) +#define DAVINCI_ABCR_RHOLD(n) ((n) << 4) +#define DAVINCI_ABCR_TA(n) ((n) << 2) +#define DAVINCI_ABCR_ASIZE_16BIT 1 +#define DAVINCI_ABCR_ASIZE_8BIT 0 + +#endif diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h new file mode 100644 index 0000000000..50ff13a3b2 --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h @@ -0,0 +1,150 @@ +/* + * K2HK: SoC definitions + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __ASM_ARCH_HARDWARE_K2HK_H +#define __ASM_ARCH_HARDWARE_K2HK_H + +#define K2HK_ASYNC_EMIF_CNTRL_BASE 0x21000a00 +#define DAVINCI_ASYNC_EMIF_CNTRL_BASE K2HK_ASYNC_EMIF_CNTRL_BASE +#define K2HK_ASYNC_EMIF_DATA_CE0_BASE 0x30000000 +#define K2HK_ASYNC_EMIF_DATA_CE1_BASE 0x34000000 +#define K2HK_ASYNC_EMIF_DATA_CE2_BASE 0x38000000 +#define K2HK_ASYNC_EMIF_DATA_CE3_BASE 0x3c000000 + +#define K2HK_PLL_CNTRL_BASE 0x02310000 +#define CLOCK_BASE K2HK_PLL_CNTRL_BASE +#define KS2_RSTCTRL (K2HK_PLL_CNTRL_BASE + 0xe8) +#define KS2_RSTCTRL_KEY 0x5a69 +#define KS2_RSTCTRL_MASK 0xffff0000 +#define KS2_RSTCTRL_SWRST 0xfffe0000 + +#define K2HK_PSC_BASE 0x02350000 +#define KS2_DEVICE_STATE_CTRL_BASE 0x02620000 +#define JTAG_ID_REG (KS2_DEVICE_STATE_CTRL_BASE + 0x18) +#define K2HK_DEVSTAT (KS2_DEVICE_STATE_CTRL_BASE + 0x20) + +#define K2HK_MISC_CTRL (KS2_DEVICE_STATE_CTRL_BASE + 0xc7c) + +#define ARM_PLL_EN BIT(13) + +#define K2HK_SPI0_BASE 0x21000400 +#define K2HK_SPI1_BASE 0x21000600 +#define K2HK_SPI2_BASE 0x21000800 +#define K2HK_SPI_BASE K2HK_SPI0_BASE + +/* Chip configuration unlock codes and registers */ +#define KEYSTONE_KICK0 (KS2_DEVICE_STATE_CTRL_BASE + 0x38) +#define KEYSTONE_KICK1 (KS2_DEVICE_STATE_CTRL_BASE + 0x3c) +#define KEYSTONE_KICK0_MAGIC 0x83e70b13 +#define KEYSTONE_KICK1_MAGIC 0x95a4f1e0 + +/* PA SS Registers */ +#define KS2_PASS_BASE 0x02000000 + +/* PLL control registers */ +#define K2HK_MAINPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x350) +#define K2HK_MAINPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x354) +#define K2HK_PASSPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x358) +#define K2HK_PASSPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x35C) +#define K2HK_DDR3APLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x360) +#define K2HK_DDR3APLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x364) +#define K2HK_DDR3BPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x368) +#define K2HK_DDR3BPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x36C) +#define K2HK_ARMPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x370) +#define K2HK_ARMPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x374) + +/* Power and Sleep Controller (PSC) Domains */ +#define K2HK_LPSC_MOD 0 +#define K2HK_LPSC_DUMMY1 1 +#define K2HK_LPSC_USB 2 +#define K2HK_LPSC_EMIF25_SPI 3 +#define K2HK_LPSC_TSIP 4 +#define K2HK_LPSC_DEBUGSS_TRC 5 +#define K2HK_LPSC_TETB_TRC 6 +#define K2HK_LPSC_PKTPROC 7 +#define KS2_LPSC_PA K2HK_LPSC_PKTPROC +#define K2HK_LPSC_SGMII 8 +#define KS2_LPSC_CPGMAC K2HK_LPSC_SGMII +#define K2HK_LPSC_CRYPTO 9 +#define K2HK_LPSC_PCIE 10 +#define K2HK_LPSC_SRIO 11 +#define K2HK_LPSC_VUSR0 12 +#define K2HK_LPSC_CHIP_SRSS 13 +#define K2HK_LPSC_MSMC 14 +#define K2HK_LPSC_GEM_0 15 +#define K2HK_LPSC_GEM_1 16 +#define K2HK_LPSC_GEM_2 17 +#define K2HK_LPSC_GEM_3 18 +#define K2HK_LPSC_GEM_4 19 +#define K2HK_LPSC_GEM_5 20 +#define K2HK_LPSC_GEM_6 21 +#define K2HK_LPSC_GEM_7 22 +#define K2HK_LPSC_EMIF4F_DDR3A 23 +#define K2HK_LPSC_EMIF4F_DDR3B 24 +#define K2HK_LPSC_TAC 25 +#define K2HK_LPSC_RAC 26 +#define K2HK_LPSC_RAC_1 27 +#define K2HK_LPSC_FFTC_A 28 +#define K2HK_LPSC_FFTC_B 29 +#define K2HK_LPSC_FFTC_C 30 +#define K2HK_LPSC_FFTC_D 31 +#define K2HK_LPSC_FFTC_E 32 +#define K2HK_LPSC_FFTC_F 33 +#define K2HK_LPSC_AI2 34 +#define K2HK_LPSC_TCP3D_0 35 +#define K2HK_LPSC_TCP3D_1 36 +#define K2HK_LPSC_TCP3D_2 37 +#define K2HK_LPSC_TCP3D_3 38 +#define K2HK_LPSC_VCP2X4_A 39 +#define K2HK_LPSC_CP2X4_B 40 +#define K2HK_LPSC_VCP2X4_C 41 +#define K2HK_LPSC_VCP2X4_D 42 +#define K2HK_LPSC_VCP2X4_E 43 +#define K2HK_LPSC_VCP2X4_F 44 +#define K2HK_LPSC_VCP2X4_G 45 +#define K2HK_LPSC_VCP2X4_H 46 +#define K2HK_LPSC_BCP 47 +#define K2HK_LPSC_DXB 48 +#define K2HK_LPSC_VUSR1 49 +#define K2HK_LPSC_XGE 50 +#define K2HK_LPSC_ARM_SREFLEX 51 +#define K2HK_LPSC_TETRIS 52 + +#define K2HK_UART0_BASE 0x02530c00 + +/* DDR3A definitions */ +#define K2HK_DDR3A_EMIF_CTRL_BASE 0x21010000 +#define K2HK_DDR3A_EMIF_DATA_BASE 0x80000000 +#define K2HK_DDR3A_DDRPHYC 0x02329000 +/* DDR3B definitions */ +#define K2HK_DDR3B_EMIF_CTRL_BASE 0x21020000 +#define K2HK_DDR3B_EMIF_DATA_BASE 0x60000000 +#define K2HK_DDR3B_DDRPHYC 0x02328000 + +/* Queue manager */ +#define DEVICE_QM_MANAGER_BASE 0x02a02000 +#define DEVICE_QM_DESC_SETUP_BASE 0x02a03000 +#define DEVICE_QM_MANAGER_QUEUES_BASE 0x02a80000 +#define DEVICE_QM_MANAGER_Q_PROXY_BASE 0x02ac0000 +#define DEVICE_QM_QUEUE_STATUS_BASE 0x02a40000 +#define DEVICE_QM_NUM_LINKRAMS 2 +#define DEVICE_QM_NUM_MEMREGIONS 20 + +#define DEVICE_PA_CDMA_GLOBAL_CFG_BASE 0x02004000 +#define DEVICE_PA_CDMA_TX_CHAN_CFG_BASE 0x02004400 +#define DEVICE_PA_CDMA_RX_CHAN_CFG_BASE 0x02004800 +#define DEVICE_PA_CDMA_RX_FLOW_CFG_BASE 0x02005000 + +#define DEVICE_PA_CDMA_RX_NUM_CHANNELS 24 +#define DEVICE_PA_CDMA_RX_NUM_FLOWS 32 +#define DEVICE_PA_CDMA_TX_NUM_CHANNELS 9 + +/* MSMC control */ +#define K2HK_MSMC_CTRL_BASE 0x0bc00000 + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h new file mode 100644 index 0000000000..a305a0cc09 --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/hardware.h @@ -0,0 +1,175 @@ +/* + * Keystone2: Common SoC definitions, structures etc. + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include <config.h> + +#ifndef __ASSEMBLY__ + +#include <linux/sizes.h> +#include <asm/io.h> + +#define REG(addr) (*(volatile unsigned int *)(addr)) +#define REG_P(addr) ((volatile unsigned int *)(addr)) + +typedef volatile unsigned int dv_reg; +typedef volatile unsigned int *dv_reg_p; + +#define ASYNC_EMIF_NUM_CS 4 +#define ASYNC_EMIF_MODE_NOR 0 +#define ASYNC_EMIF_MODE_NAND 1 +#define ASYNC_EMIF_MODE_ONENAND 2 +#define ASYNC_EMIF_PRESERVE -1 + +struct async_emif_config { + unsigned mode; + unsigned select_strobe; + unsigned extend_wait; + unsigned wr_setup; + unsigned wr_strobe; + unsigned wr_hold; + unsigned rd_setup; + unsigned rd_strobe; + unsigned rd_hold; + unsigned turn_around; + enum { + ASYNC_EMIF_8 = 0, + ASYNC_EMIF_16 = 1, + ASYNC_EMIF_32 = 2, + } width; +}; + +void init_async_emif(int num_cs, struct async_emif_config *config); + +struct ddr3_phy_config { + unsigned int pllcr; + unsigned int pgcr1_mask; + unsigned int pgcr1_val; + unsigned int ptr0; + unsigned int ptr1; + unsigned int ptr2; + unsigned int ptr3; + unsigned int ptr4; + unsigned int dcr_mask; + unsigned int dcr_val; + unsigned int dtpr0; + unsigned int dtpr1; + unsigned int dtpr2; + unsigned int mr0; + unsigned int mr1; + unsigned int mr2; + unsigned int dtcr; + unsigned int pgcr2; + unsigned int zq0cr1; + unsigned int zq1cr1; + unsigned int zq2cr1; + unsigned int pir_v1; + unsigned int pir_v2; +}; + +struct ddr3_emif_config { + unsigned int sdcfg; + unsigned int sdtim1; + unsigned int sdtim2; + unsigned int sdtim3; + unsigned int sdtim4; + unsigned int zqcfg; + unsigned int sdrfc; +}; + +#endif + +#define BIT(x) (1 << (x)) + +#define KS2_DDRPHY_PIR_OFFSET 0x04 +#define KS2_DDRPHY_PGCR0_OFFSET 0x08 +#define KS2_DDRPHY_PGCR1_OFFSET 0x0C +#define KS2_DDRPHY_PGSR0_OFFSET 0x10 +#define KS2_DDRPHY_PGSR1_OFFSET 0x14 +#define KS2_DDRPHY_PLLCR_OFFSET 0x18 +#define KS2_DDRPHY_PTR0_OFFSET 0x1C +#define KS2_DDRPHY_PTR1_OFFSET 0x20 +#define KS2_DDRPHY_PTR2_OFFSET 0x24 +#define KS2_DDRPHY_PTR3_OFFSET 0x28 +#define KS2_DDRPHY_PTR4_OFFSET 0x2C +#define KS2_DDRPHY_DCR_OFFSET 0x44 + +#define KS2_DDRPHY_DTPR0_OFFSET 0x48 +#define KS2_DDRPHY_DTPR1_OFFSET 0x4C +#define KS2_DDRPHY_DTPR2_OFFSET 0x50 + +#define KS2_DDRPHY_MR0_OFFSET 0x54 +#define KS2_DDRPHY_MR1_OFFSET 0x58 +#define KS2_DDRPHY_MR2_OFFSET 0x5C +#define KS2_DDRPHY_DTCR_OFFSET 0x68 +#define KS2_DDRPHY_PGCR2_OFFSET 0x8C + +#define KS2_DDRPHY_ZQ0CR1_OFFSET 0x184 +#define KS2_DDRPHY_ZQ1CR1_OFFSET 0x194 +#define KS2_DDRPHY_ZQ2CR1_OFFSET 0x1A4 +#define KS2_DDRPHY_ZQ3CR1_OFFSET 0x1B4 + +#define KS2_DDRPHY_DATX8_8_OFFSET 0x3C0 + +#define IODDRM_MASK 0x00000180 +#define ZCKSEL_MASK 0x01800000 +#define CL_MASK 0x00000072 +#define WR_MASK 0x00000E00 +#define BL_MASK 0x00000003 +#define RRMODE_MASK 0x00040000 +#define UDIMM_MASK 0x20000000 +#define BYTEMASK_MASK 0x0003FC00 +#define MPRDQ_MASK 0x00000080 +#define PDQ_MASK 0x00000070 +#define NOSRA_MASK 0x08000000 +#define ECC_MASK 0x00000001 + +#define KS2_DDR3_MIDR_OFFSET 0x00 +#define KS2_DDR3_STATUS_OFFSET 0x04 +#define KS2_DDR3_SDCFG_OFFSET 0x08 +#define KS2_DDR3_SDRFC_OFFSET 0x10 +#define KS2_DDR3_SDTIM1_OFFSET 0x18 +#define KS2_DDR3_SDTIM2_OFFSET 0x1C +#define KS2_DDR3_SDTIM3_OFFSET 0x20 +#define KS2_DDR3_SDTIM4_OFFSET 0x28 +#define KS2_DDR3_PMCTL_OFFSET 0x38 +#define KS2_DDR3_ZQCFG_OFFSET 0xC8 + +#ifdef CONFIG_SOC_K2HK +#include <asm/arch/hardware-k2hk.h> +#endif + +#ifndef __ASSEMBLY__ +static inline int cpu_is_k2hk(void) +{ + unsigned int jtag_id = __raw_readl(JTAG_ID_REG); + unsigned int part_no = (jtag_id >> 12) & 0xffff; + + return (part_no == 0xb981) ? 1 : 0; +} + +static inline int cpu_revision(void) +{ + unsigned int jtag_id = __raw_readl(JTAG_ID_REG); + unsigned int rev = (jtag_id >> 28) & 0xf; + + return rev; +} + +void share_all_segments(int priv_id); +int cpu_to_bus(u32 *ptr, u32 length); +void init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg); +void init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg); +void init_ddr3(void); +void sdelay(unsigned long); + +#endif + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-keystone/i2c_defs.h b/arch/arm/include/asm/arch-keystone/i2c_defs.h new file mode 100644 index 0000000000..d4256526cc --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/i2c_defs.h @@ -0,0 +1,17 @@ +/* + * keystone: i2c driver definitions + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _I2C_DEFS_H_ +#define _I2C_DEFS_H_ + +#define I2C0_BASE 0x02530000 +#define I2C1_BASE 0x02530400 +#define I2C2_BASE 0x02530800 +#define I2C_BASE I2C0_BASE + +#endif diff --git a/arch/arm/include/asm/arch-keystone/keystone_nav.h b/arch/arm/include/asm/arch-keystone/keystone_nav.h new file mode 100644 index 0000000000..ab81eaf1fd --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/keystone_nav.h @@ -0,0 +1,193 @@ +/* + * Multicore Navigator definitions + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _KEYSTONE_NAV_H_ +#define _KEYSTONE_NAV_H_ + +#include <asm/arch/hardware.h> +#include <asm/io.h> + +enum soc_type_t { + k2hk +}; + +#define QM_OK 0 +#define QM_ERR -1 +#define QM_DESC_TYPE_HOST 0 +#define QM_DESC_PSINFO_IN_DESCR 0 +#define QM_DESC_DEFAULT_DESCINFO (QM_DESC_TYPE_HOST << 30) | \ + (QM_DESC_PSINFO_IN_DESCR << 22) + +/* Packet Info */ +#define QM_DESC_PINFO_EPIB 1 +#define QM_DESC_PINFO_RETURN_OWN 1 +#define QM_DESC_DEFAULT_PINFO (QM_DESC_PINFO_EPIB << 31) | \ + (QM_DESC_PINFO_RETURN_OWN << 15) + +struct qm_cfg_reg { + u32 revision; + u32 __pad1; + u32 divert; + u32 link_ram_base0; + u32 link_ram_size0; + u32 link_ram_base1; + u32 link_ram_size1; + u32 link_ram_base2; + u32 starvation[0]; +}; + +struct descr_mem_setup_reg { + u32 base_addr; + u32 start_idx; + u32 desc_reg_size; + u32 _res0; +}; + +struct qm_reg_queue { + u32 entry_count; + u32 byte_count; + u32 packet_size; + u32 ptr_size_thresh; +}; + +struct qm_config { + /* QM module addresses */ + u32 stat_cfg; /* status and config */ + struct qm_reg_queue *queue; /* management region */ + u32 mngr_vbusm; /* management region (VBUSM) */ + u32 i_lram; /* internal linking RAM */ + struct qm_reg_queue *proxy; + u32 status_ram; + struct qm_cfg_reg *mngr_cfg; + /* Queue manager config region */ + u32 intd_cfg; /* QMSS INTD config region */ + struct descr_mem_setup_reg *desc_mem; + /* descritor memory setup region*/ + u32 region_num; + u32 pdsp_cmd; /* PDSP1 command interface */ + u32 pdsp_ctl; /* PDSP1 control registers */ + u32 pdsp_iram; + /* QM configuration parameters */ + + u32 qpool_num; /* */ +}; + +struct qm_host_desc { + u32 desc_info; + u32 tag_info; + u32 packet_info; + u32 buff_len; + u32 buff_ptr; + u32 next_bdptr; + u32 orig_buff_len; + u32 orig_buff_ptr; + u32 timestamp; + u32 swinfo[3]; + u32 ps_data[20]; +}; + +#define HDESC_NUM 256 + +int qm_init(void); +void qm_close(void); +void qm_push(struct qm_host_desc *hd, u32 qnum); +struct qm_host_desc *qm_pop(u32 qnum); + +void qm_buff_push(struct qm_host_desc *hd, u32 qnum, + void *buff_ptr, u32 buff_len); + +struct qm_host_desc *qm_pop_from_free_pool(void); +void queue_close(u32 qnum); + +/* + * DMA API + */ +#define CPDMA_REG_VAL_MAKE_RX_FLOW_A(einfo, psinfo, rxerr, desc, \ + psloc, sopoff, qmgr, qnum) \ + (((einfo & 1) << 30) | \ + ((psinfo & 1) << 29) | \ + ((rxerr & 1) << 28) | \ + ((desc & 3) << 26) | \ + ((psloc & 1) << 25) | \ + ((sopoff & 0x1ff) << 16) | \ + ((qmgr & 3) << 12) | \ + ((qnum & 0xfff) << 0)) + +#define CPDMA_REG_VAL_MAKE_RX_FLOW_D(fd0qm, fd0qnum, fd1qm, fd1qnum) \ + (((fd0qm & 3) << 28) | \ + ((fd0qnum & 0xfff) << 16) | \ + ((fd1qm & 3) << 12) | \ + ((fd1qnum & 0xfff) << 0)) + +#define CPDMA_CHAN_A_ENABLE ((u32)1 << 31) +#define CPDMA_CHAN_A_TDOWN (1 << 30) +#define TDOWN_TIMEOUT_COUNT 100 + +struct global_ctl_regs { + u32 revision; + u32 perf_control; + u32 emulation_control; + u32 priority_control; + u32 qm_base_addr[4]; +}; + +struct tx_chan_regs { + u32 cfg_a; + u32 cfg_b; + u32 res[6]; +}; + +struct rx_chan_regs { + u32 cfg_a; + u32 res[7]; +}; + +struct rx_flow_regs { + u32 control; + u32 tags; + u32 tag_sel; + u32 fdq_sel[2]; + u32 thresh[3]; +}; + +struct pktdma_cfg { + struct global_ctl_regs *global; + struct tx_chan_regs *tx_ch; + u32 tx_ch_num; + struct rx_chan_regs *rx_ch; + u32 rx_ch_num; + u32 *tx_sched; + struct rx_flow_regs *rx_flows; + u32 rx_flow_num; + + u32 rx_free_q; + u32 rx_rcv_q; + u32 tx_snd_q; + + u32 rx_flow; /* flow that is used for RX */ +}; + +/* + * packet dma user allocates memory for rx buffers + * and describe it in the following structure + */ +struct rx_buff_desc { + u8 *buff_ptr; + u32 num_buffs; + u32 buff_len; + u32 rx_flow; +}; + +int netcp_close(void); +int netcp_init(struct rx_buff_desc *rx_buffers); +int netcp_send(u32 *pkt, int num_bytes, u32 swinfo2); +void *netcp_recv(u32 **pkt, int *num_bytes); +void netcp_release_rxhd(void *hd); + +#endif /* _KEYSTONE_NAV_H_ */ diff --git a/arch/arm/include/asm/arch-keystone/nand_defs.h b/arch/arm/include/asm/arch-keystone/nand_defs.h new file mode 100644 index 0000000000..58417dbc0b --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/nand_defs.h @@ -0,0 +1,23 @@ +/* + * nand driver definitions to re-use davinci nand driver on Keystone2 + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * (C) Copyright 2007 Sergey Kubushyn <ksi@koi8.net> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _NAND_DEFS_H_ +#define _NAND_DEFS_H_ + +#include <asm/arch/hardware.h> +#include <linux/mtd/nand.h> + +#define MASK_CLE 0x4000 +#define MASK_ALE 0x2000 + +#define NAND_READ_START 0x00 +#define NAND_READ_END 0x30 +#define NAND_STATUS 0x70 + +#endif diff --git a/arch/arm/include/asm/arch-keystone/psc_defs.h b/arch/arm/include/asm/arch-keystone/psc_defs.h new file mode 100644 index 0000000000..70d22cf217 --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/psc_defs.h @@ -0,0 +1,90 @@ +/* + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _PSC_DEFS_H_ +#define _PSC_DEFS_H_ + +#include <asm/arch/hardware.h> + +/* + * FILE PURPOSE: Local Power Sleep Controller definitions + * + * FILE NAME: psc_defs.h + * + * DESCRIPTION: Provides local definitions for the power saver controller + * + */ + +/* Register offsets */ +#define PSC_REG_PTCMD 0x120 +#define PSC_REG_PSTAT 0x128 +#define PSC_REG_PDSTAT(x) (0x200 + (4 * (x))) +#define PSC_REG_PDCTL(x) (0x300 + (4 * (x))) +#define PSC_REG_MDCFG(x) (0x600 + (4 * (x))) +#define PSC_REG_MDSTAT(x) (0x800 + (4 * (x))) +#define PSC_REG_MDCTL(x) (0xa00 + (4 * (x))) + +#define BOOTBITMASK(x, y) ((((((u32)1 << (((u32)x) - ((u32)y) + (u32)1)) - \ + (u32)1)) << ((u32)y))) + +#define BOOT_READ_BITFIELD(z, x, y) (((u32)z) & BOOTBITMASK(x, y)) >> (y) +#define BOOT_SET_BITFIELD(z, f, x, y) (((u32)z) & ~BOOTBITMASK(x, y)) | \ + ((((u32)f) << (y)) & BOOTBITMASK(x, y)) + +/* PDCTL */ +#define PSC_REG_PDCTL_SET_NEXT(x, y) BOOT_SET_BITFIELD((x), (y), 0, 0) +#define PSC_REG_PDCTL_SET_PDMODE(x, y) BOOT_SET_BITFIELD((x), (y), 15, 12) + +/* PDSTAT */ +#define PSC_REG_PDSTAT_GET_STATE(x) BOOT_READ_BITFIELD((x), 4, 0) + +/* MDCFG */ +#define PSC_REG_MDCFG_GET_PD(x) BOOT_READ_BITFIELD((x), 20, 16) +#define PSC_REG_MDCFG_GET_RESET_ISO(x) BOOT_READ_BITFIELD((x), 14, 14) + +/* MDCTL */ +#define PSC_REG_MDCTL_SET_NEXT(x, y) BOOT_SET_BITFIELD((x), (y), 4, 0) +#define PSC_REG_MDCTL_SET_LRSTZ(x, y) BOOT_SET_BITFIELD((x), (y), 8, 8) +#define PSC_REG_MDCTL_GET_LRSTZ(x) BOOT_READ_BITFIELD((x), 8, 8) +#define PSC_REG_MDCTL_SET_RESET_ISO(x, y) BOOT_SET_BITFIELD((x), (y), \ + 12, 12) + +/* MDSTAT */ +#define PSC_REG_MDSTAT_GET_STATUS(x) BOOT_READ_BITFIELD((x), 5, 0) +#define PSC_REG_MDSTAT_GET_LRSTZ(x) BOOT_READ_BITFIELD((x), 8, 8) +#define PSC_REG_MDSTAT_GET_LRSTDONE(x) BOOT_READ_BITFIELD((x), 9, 9) + +/* PDCTL states */ +#define PSC_REG_VAL_PDCTL_NEXT_ON 1 +#define PSC_REG_VAL_PDCTL_NEXT_OFF 0 + +#define PSC_REG_VAL_PDCTL_PDMODE_SLEEP 0 + +/* MDCTL states */ +#define PSC_REG_VAL_MDCTL_NEXT_SWRSTDISABLE 0 +#define PSC_REG_VAL_MDCTL_NEXT_OFF 2 +#define PSC_REG_VAL_MDCTL_NEXT_ON 3 + +/* MDSTAT states */ +#define PSC_REG_VAL_MDSTAT_STATE_ON 3 +#define PSC_REG_VAL_MDSTAT_STATE_ENABLE_IN_PROG 0x24 +#define PSC_REG_VAL_MDSTAT_STATE_OFF 2 +#define PSC_REG_VAL_MDSTAT_STATE_DISABLE_IN_PROG1 0x20 +#define PSC_REG_VAL_MDSTAT_STATE_DISABLE_IN_PROG2 0x21 +#define PSC_REG_VAL_MDSTAT_STATE_DISABLE_IN_PROG3 0x22 + +/* + * Timeout limit on checking PTSTAT. This is the number of times the + * wait function will be called before giving up. + */ +#define PSC_PTSTAT_TIMEOUT_LIMIT 100 + +u32 psc_get_domain_num(u32 mod_num); +int psc_enable_module(u32 mod_num); +int psc_disable_module(u32 mod_num); +int psc_disable_domain(u32 domain_num); + +#endif /* _PSC_DEFS_H_ */ diff --git a/arch/arm/include/asm/arch-keystone/spl.h b/arch/arm/include/asm/arch-keystone/spl.h new file mode 100644 index 0000000000..7012ea7ff0 --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/spl.h @@ -0,0 +1,12 @@ +/* + * (C) Copyright 2012-2014 + * Texas Instruments, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _ASM_ARCH_SPL_H_ +#define _ASM_SPL_H_ + +#define BOOT_DEVICE_SPI 2 + +#endif diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h index 44fa66f8a3..5866bf23e8 100644 --- a/arch/arm/include/asm/arch-omap3/sys_proto.h +++ b/arch/arm/include/asm/arch-omap3/sys_proto.h @@ -8,6 +8,7 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ #include <linux/mtd/omap_gpmc.h> +#include <asm/omap_common.h> typedef struct { u32 mtype; @@ -62,13 +63,13 @@ void secureworld_exit(void); void try_unlock_memory(void); u32 get_boot_type(void); void invalidate_dcache(u32); -void sr32(void *, u32, u32, u32); u32 wait_on_value(u32, u32, void *, u32); void sdelay(unsigned long); void make_cs1_contiguous(void); void omap_nand_switch_ecc(uint32_t, uint32_t); void power_init_r(void); void dieid_num_r(void); +void get_dieid(u32 *id); void do_omap3_emu_romcode_call(u32 service_id, u32 parameters); void omap3_gp_romcode_call(u32 service_id, u32 parameter); u32 warm_reset(void); diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h index b338a1566c..80172f3794 100644 --- a/arch/arm/include/asm/arch-omap4/sys_proto.h +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -31,7 +31,6 @@ void watchdog_init(void); u32 get_device_type(void); void do_set_mux(u32 base, struct pad_conf_entry const *array, int size); void set_muxconf_regs_essential(void); -void sr32(void *, u32, u32, u32); u32 wait_on_value(u32, u32, void *, u32); void sdelay(unsigned long); void set_pl310_ctrl_reg(u32 val); diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index 9e007c87ae..bf12c73372 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -32,7 +32,6 @@ void watchdog_init(void); u32 get_device_type(void); void do_set_mux(u32 base, struct pad_conf_entry const *array, int size); void set_muxconf_regs_essential(void); -void sr32(void *, u32, u32, u32); u32 wait_on_value(u32, u32, void *, u32); void sdelay(unsigned long); void setup_clocks_for_console(void); diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 04925bca1c..729723afef 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -574,6 +574,8 @@ void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control, u32 txdone, u32 txdone_mask, u32 opp); s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb); +void usb_fake_mac_from_die_id(u32 *id); + /* HW Init Context */ #define OMAP_INIT_CONTEXT_SPL 0 #define OMAP_INIT_CONTEXT_UBOOT_FROM_NOR 1 |