diff options
Diffstat (limited to 'arch/arm/lib/cache-cp15.c')
| -rw-r--r-- | arch/arm/lib/cache-cp15.c | 82 |
1 files changed, 82 insertions, 0 deletions
diff --git a/arch/arm/lib/cache-cp15.c b/arch/arm/lib/cache-cp15.c index 62ed54fb4d..fe6d45987b 100644 --- a/arch/arm/lib/cache-cp15.c +++ b/arch/arm/lib/cache-cp15.c @@ -25,6 +25,15 @@ #include <asm/system.h> #if !(defined(CONFIG_SYS_NO_ICACHE) && defined(CONFIG_SYS_NO_DCACHE)) + +#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH) +#define CACHE_SETUP 0x1a +#else +#define CACHE_SETUP 0x1e +#endif + +DECLARE_GLOBAL_DATA_PTR; + static void cp_delay (void) { volatile int i; @@ -32,6 +41,67 @@ static void cp_delay (void) /* copro seems to need some delay between reading and writing */ for (i = 0; i < 100; i++) nop(); + asm volatile("" : : : "memory"); +} + +#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) +static inline void dram_bank_mmu_setup(int bank) +{ + u32 *page_table = (u32 *)gd->tlb_addr; + bd_t *bd = gd->bd; + int i; + + debug("%s: bank: %d\n", __func__, bank); + for (i = bd->bi_dram[bank].start >> 20; + i < (bd->bi_dram[bank].start + bd->bi_dram[bank].size) >> 20; + i++) { + page_table[i] = i << 20 | (3 << 10) | CACHE_SETUP; + } +} +#endif + +/* to activate the MMU we need to set up virtual memory: use 1M areas */ +static inline void mmu_setup(void) +{ +#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) + u32 *page_table = (u32 *)gd->tlb_addr; +#else + static u32 __attribute__((aligned(16384))) page_table[4096]; + bd_t *bd = gd->bd; + int j; +#endif + int i; + u32 reg; + + /* Set up an identity-mapping for all 4GB, rw for everyone */ + for (i = 0; i < 4096; i++) + page_table[i] = i << 20 | (3 << 10) | 0x12; + +#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + dram_bank_mmu_setup(i); + } +#else + /* Then, enable cacheable and bufferable for RAM only */ + for (j = 0; j < CONFIG_NR_DRAM_BANKS; j++) { + for (i = bd->bi_dram[j].start >> 20; + i < (bd->bi_dram[j].start + bd->bi_dram[j].size) >> 20; + i++) { + page_table[i] = i << 20 | (3 << 10) | CACHE_SETUP; + } + } +#endif + + /* Copy the page table address to cp15 */ + asm volatile("mcr p15, 0, %0, c2, c0, 0" + : : "r" (page_table) : "memory"); + /* Set the access control to all-supervisor */ + asm volatile("mcr p15, 0, %0, c3, c0, 0" + : : "r" (~0)); + /* and enable the mmu */ + reg = get_cr(); /* get control reg. */ + cp_delay(); + set_cr(reg | CR_M); } /* cache_bit must be either CR_I or CR_C */ @@ -39,6 +109,9 @@ static void cache_enable(uint32_t cache_bit) { uint32_t reg; + /* The data cache is not active unless the mmu is enabled too */ + if (cache_bit == CR_C) + mmu_setup(); reg = get_cr(); /* get control reg. */ cp_delay(); set_cr(reg | cache_bit); @@ -49,6 +122,15 @@ static void cache_disable(uint32_t cache_bit) { uint32_t reg; + if (cache_bit == CR_C) { + /* if cache isn;t enabled no need to disable */ + reg = get_cr(); + if ((reg & CR_C) != CR_C) + return; + /* if disabling data cache, disable mmu too */ + cache_bit |= CR_M; + flush_cache(0, ~0); + } reg = get_cr(); cp_delay(); set_cr(reg & ~cache_bit); |