diff options
Diffstat (limited to 'arch/arm/mach-at91/include/mach')
| -rw-r--r-- | arch/arm/mach-at91/include/mach/at91_pio.h | 63 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/at91sam9x5.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/sama5d3.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/sama5d4.h | 2 |
4 files changed, 34 insertions, 35 deletions
diff --git a/arch/arm/mach-at91/include/mach/at91_pio.h b/arch/arm/mach-at91/include/mach/at91_pio.h index 301227880a..946f076714 100644 --- a/arch/arm/mach-at91/include/mach/at91_pio.h +++ b/arch/arm/mach-at91/include/mach/at91_pio.h @@ -32,6 +32,8 @@ #define AT91_ASM_PIOD_ASR \ (ATMEL_BASE_PIO + AT91_PIO_PORTD * AT91_ASM_PIO_RANGE + 0x70) +#define PIO_SCDR_DIV 0x3fff /* Slow Clock Divider Selection for Debouncing Mask */ + #ifndef __ASSEMBLY__ typedef struct at91_port { @@ -63,28 +65,32 @@ typedef struct at91_port { u32 puer; /* 0x64 Pull-up Enable Register */ u32 pusr; /* 0x68 Pad Pull-up Status Register */ u32 reserved4; -#if defined(CPU_HAS_PIO3) - u32 abcdsr1; /* 0x70 Peripheral ABCD Select Register 1 */ - u32 abcdsr2; /* 0x74 Peripheral ABCD Select Register 2 */ - u32 reserved5[2]; - u32 ifscdr; /* 0x80 Input Filter SCLK Disable Register */ - u32 ifscer; /* 0x84 Input Filter SCLK Enable Register */ - u32 ifscsr; /* 0x88 Input Filter SCLK Status Register */ - u32 scdr; /* 0x8C SCLK Divider Debouncing Register */ - u32 ppddr; /* 0x90 Pad Pull-down Disable Register */ - u32 ppder; /* 0x94 Pad Pull-down Enable Register */ - u32 ppdsr; /* 0x98 Pad Pull-down Status Register */ - u32 reserved6; /* */ -#else - u32 asr; /* 0x70 Select A Register */ - u32 bsr; /* 0x74 Select B Register */ - u32 absr; /* 0x78 AB Select Status Register */ - u32 reserved5[9]; /* */ -#endif + union { + struct { + u32 abcdsr1; /* 0x70 Peripheral ABCD Select Register 1 */ + u32 abcdsr2; /* 0x74 Peripheral ABCD Select Register 2 */ + u32 reserved5[2]; + u32 ifscdr; /* 0x80 Input Filter SCLK Disable Register */ + u32 ifscer; /* 0x84 Input Filter SCLK Enable Register */ + u32 ifscsr; /* 0x88 Input Filter SCLK Status Register */ + u32 scdr; /* 0x8C SCLK Divider Debouncing Register */ + u32 ppddr; /* 0x90 Pad Pull-down Disable Register */ + u32 ppder; /* 0x94 Pad Pull-down Enable Register */ + u32 ppdsr; /* 0x98 Pad Pull-down Status Register */ + u32 reserved6; /* */ + } pio3; + + struct { + u32 asr; /* 0x70 Select A Register */ + u32 bsr; /* 0x74 Select B Register */ + u32 absr; /* 0x78 AB Select Status Register */ + u32 reserved5[9]; /* */ + } pio2; + } mux; + u32 ower; /* 0xA0 Output Write Enable Register */ u32 owdr; /* 0xA4 Output Write Disable Register */ u32 owsr; /* OxA8 Output Write Status Register */ -#if defined(CPU_HAS_PIO3) u32 reserved7; /* */ u32 aimer; /* 0xB0 Additional INT Modes Enable Register */ u32 aimdr; /* 0xB4 Additional INT Modes Disable Register */ @@ -104,9 +110,6 @@ typedef struct at91_port { u32 reserved11[5]; /* */ u32 schmitt; /* 0x100 Schmitt Trigger Register */ u32 reserved12[63]; -#else - u32 reserved6[85]; -#endif } at91_port_t; typedef union at91_pio { @@ -123,13 +126,6 @@ typedef union at91_pio { #ifdef CONFIG_AT91_GPIO int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup); int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup); -#if defined(CPU_HAS_PIO3) -int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup); -int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup); -int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div); -int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on); -int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin); -#endif int at91_set_pio_input(unsigned port, unsigned pin, int use_pullup); int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on); int at91_set_pio_output(unsigned port, unsigned pin, int value); @@ -138,6 +134,15 @@ int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup); int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on); int at91_set_pio_value(unsigned port, unsigned pin, int value); int at91_get_pio_value(unsigned port, unsigned pin); + +int at91_pio3_set_a_periph(unsigned port, unsigned pin, int use_pullup); +int at91_pio3_set_b_periph(unsigned port, unsigned pin, int use_pullup); +int at91_pio3_set_c_periph(unsigned port, unsigned pin, int use_pullup); +int at91_pio3_set_d_periph(unsigned port, unsigned pin, int use_pullup); +int at91_pio3_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div); +int at91_pio3_set_pio_pullup(unsigned port, unsigned pin, int use_pullup); +int at91_pio3_set_pio_pulldown(unsigned port, unsigned pin, int is_on); +int at91_pio3_set_pio_disable_schmitt_trig(unsigned port, unsigned pin); #endif #endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h index 8100ebed4b..e7224e432d 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9x5.h +++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h @@ -171,8 +171,6 @@ * Other misc defines */ #define ATMEL_PIO_PORTS 4 -#define CPU_HAS_PIO3 -#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */ #define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP #define ATMEL_ID_UHP ATMEL_ID_UHPHS diff --git a/arch/arm/mach-at91/include/mach/sama5d3.h b/arch/arm/mach-at91/include/mach/sama5d3.h index 33f6c97c11..d558f95141 100644 --- a/arch/arm/mach-at91/include/mach/sama5d3.h +++ b/arch/arm/mach-at91/include/mach/sama5d3.h @@ -188,8 +188,6 @@ * Other misc defines */ #define ATMEL_PIO_PORTS 5 -#define CPU_HAS_PIO3 -#define PIO_SCDR_DIV 0x3fff #define CPU_HAS_PCR /* Timer */ diff --git a/arch/arm/mach-at91/include/mach/sama5d4.h b/arch/arm/mach-at91/include/mach/sama5d4.h index 90085da1c6..78cc2a7a0a 100644 --- a/arch/arm/mach-at91/include/mach/sama5d4.h +++ b/arch/arm/mach-at91/include/mach/sama5d4.h @@ -174,8 +174,6 @@ * Other misc defines */ #define ATMEL_PIO_PORTS 5 -#define CPU_HAS_PIO3 -#define PIO_SCDR_DIV 0x3fff #define CPU_HAS_PCR #define CPU_HAS_H32MXDIV |