diff options
Diffstat (limited to 'arch/arm/mach-imx')
| -rw-r--r-- | arch/arm/mach-imx/imx8m/clock.c | 134 |
1 files changed, 110 insertions, 24 deletions
diff --git a/arch/arm/mach-imx/imx8m/clock.c b/arch/arm/mach-imx/imx8m/clock.c index f2cb4e1030..3766d988ba 100644 --- a/arch/arm/mach-imx/imx8m/clock.c +++ b/arch/arm/mach-imx/imx8m/clock.c @@ -525,41 +525,127 @@ u32 imx_get_fecclk(void) return get_root_clk(ENET_AXI_CLK_ROOT); } -#ifdef CONFIG_SPL_BUILD -void dram_pll_init(void) +static struct dram_bypass_clk_setting imx8mq_dram_bypass_tbl[] = { + DRAM_BYPASS_ROOT_CONFIG(MHZ(100), 2, CLK_ROOT_PRE_DIV1, 2, + CLK_ROOT_PRE_DIV2), + DRAM_BYPASS_ROOT_CONFIG(MHZ(250), 3, CLK_ROOT_PRE_DIV2, 2, + CLK_ROOT_PRE_DIV2), + DRAM_BYPASS_ROOT_CONFIG(MHZ(400), 1, CLK_ROOT_PRE_DIV2, 3, + CLK_ROOT_PRE_DIV2), +}; + +void dram_enable_bypass(ulong clk_val) { - struct src *src = (struct src *)SRC_BASE_ADDR; - void __iomem *pll_control_reg = &ana_pll->dram_pll_cfg0; - u32 pwdn_mask = 0, pll_clke = 0, bypass1 = 0, bypass2 = 0; - u32 val; - int ret; + int i; + struct dram_bypass_clk_setting *config; - setbits_le32(GPC_BASE_ADDR + 0xEC, BIT(7)); - setbits_le32(GPC_BASE_ADDR + 0xF8, BIT(5)); + for (i = 0; i < ARRAY_SIZE(imx8mq_dram_bypass_tbl); i++) { + if (clk_val == imx8mq_dram_bypass_tbl[i].clk) + break; + } + + if (i == ARRAY_SIZE(imx8mq_dram_bypass_tbl)) { + printf("No matched freq table %lu\n", clk_val); + return; + } - pwdn_mask = SSCG_PLL_PD_MASK; - pll_clke = SSCG_PLL_DRAM_PLL_CLKE_MASK; - bypass1 = SSCG_PLL_BYPASS1_MASK; - bypass2 = SSCG_PLL_BYPASS2_MASK; + config = &imx8mq_dram_bypass_tbl[i]; - /* Enable DDR1 and DDR2 domain */ - writel(SRC_DDR1_ENABLE_MASK, &src->ddr1_rcr); - writel(SRC_DDR1_ENABLE_MASK, &src->ddr2_rcr); + clock_set_target_val(DRAM_ALT_CLK_ROOT, CLK_ROOT_ON | + CLK_ROOT_SOURCE_SEL(config->alt_root_sel) | + CLK_ROOT_PRE_DIV(config->alt_pre_div)); + clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON | + CLK_ROOT_SOURCE_SEL(config->apb_root_sel) | + CLK_ROOT_PRE_DIV(config->apb_pre_div)); + clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON | + CLK_ROOT_SOURCE_SEL(1)); +} + +void dram_disable_bypass(void) +{ + clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON | + CLK_ROOT_SOURCE_SEL(0)); + clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON | + CLK_ROOT_SOURCE_SEL(4) | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV5)); +} + +#ifdef CONFIG_SPL_BUILD +void dram_pll_init(ulong pll_val) +{ + u32 val; + void __iomem *pll_control_reg = &ana_pll->dram_pll_cfg0; + void __iomem *pll_cfg_reg2 = &ana_pll->dram_pll_cfg2; + + /* Bypass */ + setbits_le32(pll_control_reg, SSCG_PLL_BYPASS1_MASK); + setbits_le32(pll_control_reg, SSCG_PLL_BYPASS2_MASK); + + switch (pll_val) { + case MHZ(800): + val = readl(pll_cfg_reg2); + val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK | + SSCG_PLL_FEEDBACK_DIV_F2_MASK | + SSCG_PLL_FEEDBACK_DIV_F1_MASK | + SSCG_PLL_REF_DIVR2_MASK); + val |= SSCG_PLL_OUTPUT_DIV_VAL(0); + val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(11); + val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39); + val |= SSCG_PLL_REF_DIVR2_VAL(29); + writel(val, pll_cfg_reg2); + break; + case MHZ(600): + val = readl(pll_cfg_reg2); + val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK | + SSCG_PLL_FEEDBACK_DIV_F2_MASK | + SSCG_PLL_FEEDBACK_DIV_F1_MASK | + SSCG_PLL_REF_DIVR2_MASK); + val |= SSCG_PLL_OUTPUT_DIV_VAL(1); + val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(17); + val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39); + val |= SSCG_PLL_REF_DIVR2_VAL(29); + writel(val, pll_cfg_reg2); + break; + case MHZ(400): + val = readl(pll_cfg_reg2); + val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK | + SSCG_PLL_FEEDBACK_DIV_F2_MASK | + SSCG_PLL_FEEDBACK_DIV_F1_MASK | + SSCG_PLL_REF_DIVR2_MASK); + val |= SSCG_PLL_OUTPUT_DIV_VAL(1); + val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(11); + val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39); + val |= SSCG_PLL_REF_DIVR2_VAL(29); + writel(val, pll_cfg_reg2); + break; + case MHZ(167): + val = readl(pll_cfg_reg2); + val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK | + SSCG_PLL_FEEDBACK_DIV_F2_MASK | + SSCG_PLL_FEEDBACK_DIV_F1_MASK | + SSCG_PLL_REF_DIVR2_MASK); + val |= SSCG_PLL_OUTPUT_DIV_VAL(3); + val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(8); + val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(45); + val |= SSCG_PLL_REF_DIVR2_VAL(30); + writel(val, pll_cfg_reg2); + break; + default: + break; + } /* Clear power down bit */ - clrbits_le32(pll_control_reg, pwdn_mask); + clrbits_le32(pll_control_reg, SSCG_PLL_PD_MASK); /* Eanble ARM_PLL/SYS_PLL */ - setbits_le32(pll_control_reg, pll_clke); + setbits_le32(pll_control_reg, SSCG_PLL_DRAM_PLL_CLKE_MASK); /* Clear bypass */ - clrbits_le32(pll_control_reg, bypass1); + clrbits_le32(pll_control_reg, SSCG_PLL_BYPASS1_MASK); __udelay(100); - clrbits_le32(pll_control_reg, bypass2); + clrbits_le32(pll_control_reg, SSCG_PLL_BYPASS2_MASK); /* Wait lock */ - ret = readl_poll_timeout(pll_control_reg, val, - val & SSCG_PLL_LOCK_MASK, 1); - if (ret) - printf("%s timeout\n", __func__); + while (!(readl(pll_control_reg) & SSCG_PLL_LOCK_MASK)) + ; } int frac_pll_init(u32 pll, enum frac_pll_out_val val) |