1 files changed, 251 insertions, 0 deletions
diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h
new file mode 100644
index 0000000000..25087210ec
--- /dev/null
+++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h
@@ -0,0 +1,251 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef _HIGH_SPEED_ENV_SPEC_H
+#define _HIGH_SPEED_ENV_SPEC_H
+
+#include "seq_exec.h"
+
+/*
+ * For setting or clearing a certain bit (bit is a number between 0 and 31)
+ * in the data
+ */
+#define SET_BIT(data, bit)		((data) | (0x1 << (bit)))
+#define CLEAR_BIT(data, bit)		((data) & (~(0x1 << (bit))))
+
+#define MAX_SERDES_LANES		7	/* as in a39x */
+
+/* Serdes revision */
+/* Serdes revision 1.2 (for A38x-Z1) */
+#define MV_SERDES_REV_1_2		0x0
+/* Serdes revision 2.1 (for A39x-Z1, A38x-A0) */
+#define MV_SERDES_REV_2_1		0x1
+#define MV_SERDES_REV_NA		0xff
+
+#define	SERDES_REGS_LANE_BASE_OFFSET(lane)	(0x800 * (lane))
+
+#define PEX_X4_ENABLE_OFFS						\
+	(hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2 ? 18 : 31)
+
+/* Serdes lane types */
+enum serdes_type {
+	PEX0,
+	PEX1,
+	PEX2,
+	PEX3,
+	SATA0,
+	SATA1,
+	SATA2,
+	SATA3,
+	SGMII0,
+	SGMII1,
+	SGMII2,
+	QSGMII,
+	USB3_HOST0,
+	USB3_HOST1,
+	USB3_DEVICE,
+	SGMII3,
+	XAUI,
+	RXAUI,
+	DEFAULT_SERDES,
+	LAST_SERDES_TYPE
+};
+
+/* Serdes baud rates */
+enum serdes_speed {
+	SERDES_SPEED_1_25_GBPS,
+	SERDES_SPEED_1_5_GBPS,
+	SERDES_SPEED_2_5_GBPS,
+	SERDES_SPEED_3_GBPS,
+	SERDES_SPEED_3_125_GBPS,
+	SERDES_SPEED_5_GBPS,
+	SERDES_SPEED_6_GBPS,
+	SERDES_SPEED_6_25_GBPS,
+	LAST_SERDES_SPEED
+};
+
+/* Serdes modes */
+enum serdes_mode {
+	PEX_ROOT_COMPLEX_X1,
+	PEX_ROOT_COMPLEX_X4,
+	PEX_END_POINT_X1,
+	PEX_END_POINT_X4,
+
+	SERDES_DEFAULT_MODE, /* not pex */
+
+	SERDES_LAST_MODE
+};
+
+struct serdes_map {
+	enum serdes_type	serdes_type;
+	enum serdes_speed	serdes_speed;
+	enum serdes_mode	serdes_mode;
+	int			swap_rx;
+	int			swap_tx;
+};
+
+/* Serdes ref clock options */
+enum ref_clock {
+	REF_CLOCK_25MHZ,
+	REF_CLOCK_100MHZ,
+	REF_CLOCK_40MHZ,
+	REF_CLOCK_UNSUPPORTED
+};
+
+/* Serdes sequences */
+enum serdes_seq {
+	SATA_PORT_0_ONLY_POWER_UP_SEQ,
+	SATA_PORT_1_ONLY_POWER_UP_SEQ,
+	SATA_POWER_UP_SEQ,
+	SATA_1_5_SPEED_CONFIG_SEQ,
+	SATA_3_SPEED_CONFIG_SEQ,
+	SATA_6_SPEED_CONFIG_SEQ,
+	SATA_ELECTRICAL_CONFIG_SEQ,
+	SATA_TX_CONFIG_SEQ1,
+	SATA_PORT_0_ONLY_TX_CONFIG_SEQ,
+	SATA_PORT_1_ONLY_TX_CONFIG_SEQ,
+	SATA_TX_CONFIG_SEQ2,
+
+	SGMII_POWER_UP_SEQ,
+	SGMII_1_25_SPEED_CONFIG_SEQ,
+	SGMII_3_125_SPEED_CONFIG_SEQ,
+	SGMII_ELECTRICAL_CONFIG_SEQ,
+	SGMII_TX_CONFIG_SEQ1,
+	SGMII_TX_CONFIG_SEQ2,
+
+	PEX_POWER_UP_SEQ,
+	PEX_2_5_SPEED_CONFIG_SEQ,
+	PEX_5_SPEED_CONFIG_SEQ,
+	PEX_ELECTRICAL_CONFIG_SEQ,
+	PEX_TX_CONFIG_SEQ1,
+	PEX_TX_CONFIG_SEQ2,
+	PEX_TX_CONFIG_SEQ3,
+	PEX_BY_4_CONFIG_SEQ,
+	PEX_CONFIG_REF_CLOCK_25MHZ_SEQ,
+	PEX_CONFIG_REF_CLOCK_100MHZ_SEQ,
+	PEX_CONFIG_REF_CLOCK_40MHZ_SEQ,
+
+	USB3_POWER_UP_SEQ,
+	USB3_HOST_SPEED_CONFIG_SEQ,
+	USB3_DEVICE_SPEED_CONFIG_SEQ,
+	USB3_ELECTRICAL_CONFIG_SEQ,
+	USB3_TX_CONFIG_SEQ1,
+	USB3_TX_CONFIG_SEQ2,
+	USB3_TX_CONFIG_SEQ3,
+	USB3_DEVICE_CONFIG_SEQ,
+
+	USB2_POWER_UP_SEQ,
+
+	SERDES_POWER_DOWN_SEQ,
+
+	SGMII3_POWER_UP_SEQ,
+	SGMII3_1_25_SPEED_CONFIG_SEQ,
+	SGMII3_TX_CONFIG_SEQ1,
+	SGMII3_TX_CONFIG_SEQ2,
+
+	QSGMII_POWER_UP_SEQ,
+	QSGMII_5_SPEED_CONFIG_SEQ,
+	QSGMII_ELECTRICAL_CONFIG_SEQ,
+	QSGMII_TX_CONFIG_SEQ1,
+	QSGMII_TX_CONFIG_SEQ2,
+
+	XAUI_POWER_UP_SEQ,
+	XAUI_3_125_SPEED_CONFIG_SEQ,
+	XAUI_ELECTRICAL_CONFIG_SEQ,
+	XAUI_TX_CONFIG_SEQ1,
+	XAUI_TX_CONFIG_SEQ2,
+
+	RXAUI_POWER_UP_SEQ,
+	RXAUI_6_25_SPEED_CONFIG_SEQ,
+	RXAUI_ELECTRICAL_CONFIG_SEQ,
+	RXAUI_TX_CONFIG_SEQ1,
+	RXAUI_TX_CONFIG_SEQ2,
+
+	SERDES_LAST_SEQ
+};
+
+/* The different sequence types for PEX and USB3 */
+enum {
+	PEX,
+	USB3,
+	LAST_PEX_USB_SEQ_TYPE
+};
+
+enum {
+	PEXSERDES_SPEED_2_5_GBPS,
+	PEXSERDES_SPEED_5_GBPS,
+	USB3SERDES_SPEED_5_GBPS_HOST,
+	USB3SERDES_SPEED_5_GBPS_DEVICE,
+	LAST_PEX_USB_SPEED_SEQ_TYPE
+};
+
+/* The different sequence types for SATA and SGMII */
+enum {
+	SATA,
+	SGMII,
+	SGMII_3_125,
+	LAST_SATA_SGMII_SEQ_TYPE
+};
+
+enum {
+	QSGMII_SEQ_IDX,
+	LAST_QSGMII_SEQ_TYPE
+};
+
+enum {
+	XAUI_SEQ_IDX,
+	RXAUI_SEQ_IDX,
+	LAST_XAUI_RXAUI_SEQ_TYPE
+};
+
+enum {
+	SATASERDES_SPEED_1_5_GBPS,
+	SATASERDES_SPEED_3_GBPS,
+	SATASERDES_SPEED_6_GBPS,
+	SGMIISERDES_SPEED_1_25_GBPS,
+	SGMIISERDES_SPEED_3_125_GBPS,
+	LAST_SATA_SGMII_SPEED_SEQ_TYPE
+};
+
+extern u8 selectors_serdes_rev1_map[LAST_SERDES_TYPE][MAX_SERDES_LANES];
+extern u8 selectors_serdes_rev2_map[LAST_SERDES_TYPE][MAX_SERDES_LANES];
+
+u8 hws_ctrl_serdes_rev_get(void);
+int mv_update_serdes_select_phy_mode_seq(void);
+int hws_board_topology_load(struct serdes_map *serdes_map_array);
+enum serdes_seq serdes_type_and_speed_to_speed_seq(enum serdes_type serdes_type,
+						   enum serdes_speed baud_rate);
+int hws_serdes_seq_init(void);
+int hws_serdes_seq_db_init(void);
+int hws_power_up_serdes_lanes(struct serdes_map *serdes_config_map);
+int hws_ctrl_high_speed_serdes_phy_config(void);
+int serdes_power_up_ctrl(u32 serdes_num, int serdes_power_up,
+			 enum serdes_type serdes_type,
+			 enum serdes_speed baud_rate,
+			 enum serdes_mode serdes_mode,
+			 enum ref_clock ref_clock);
+int serdes_power_up_ctrl_ext(u32 serdes_num, int serdes_power_up,
+			     enum serdes_type serdes_type,
+			     enum serdes_speed baud_rate,
+			     enum serdes_mode serdes_mode,
+			     enum ref_clock ref_clock);
+u32 hws_serdes_silicon_ref_clock_get(void);
+int hws_serdes_pex_ref_clock_get(enum serdes_type serdes_type,
+				 enum ref_clock *ref_clock);
+int hws_ref_clock_set(u32 serdes_num, enum serdes_type serdes_type,
+		      enum ref_clock ref_clock);
+int hws_update_serdes_phy_selectors(struct serdes_map *serdes_config_map);
+u32 hws_serdes_get_phy_selector_val(int serdes_num,
+				    enum serdes_type serdes_type);
+u32 hws_serdes_get_ref_clock_val(enum serdes_type serdes_type);
+u32 hws_serdes_get_max_lane(void);
+int hws_get_ext_base_addr(u32 serdes_num, u32 base_addr, u32 unit_base_offset,
+			  u32 *unit_base_reg, u32 *unit_offset);
+int hws_pex_tx_config_seq(struct serdes_map *serdes_map);
+u32 hws_get_physical_serdes_num(u32 serdes_num);
+int hws_is_serdes_active(u8 lane_num);
+
+#endif /* _HIGH_SPEED_ENV_SPEC_H */