1 files changed, 137 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig
new file mode 100644
index 0000000000..8fd32c2a46
--- /dev/null
+++ b/arch/arm/mach-omap2/am33xx/Kconfig
@@ -0,0 +1,137 @@
+if AM33XX
+
+choice
+	prompt "AM33xx board select"
+	optional
+
+config TARGET_AM335X_EVM
+	bool "Support am335x_evm"
+	select DM
+	select DM_SERIAL
+	select DM_GPIO
+	select TI_I2C_BOARD_DETECT
+	help
+	  This option specifies support for the AM335x
+	  GP and HS EVM development platforms. The AM335x
+	  GP EVM is a standalone test, development, and
+	  evaluation module system that enables developers
+	  to write software and develop hardware around
+	  an AM335x processor subsystem.
+
+config TARGET_AM335X_BALTOS
+	bool "Support am335x_baltos"
+	select DM
+	select DM_SERIAL
+	select DM_GPIO
+
+config TARGET_AM335X_IGEP0033
+	bool "Support am335x_igep0033"
+	select DM
+	select DM_SERIAL
+	select DM_GPIO
+
+config TARGET_AM335X_SHC
+	bool "Support am335x based shc board from bosch"
+	select DM
+	select DM_SERIAL
+	select DM_GPIO
+
+config TARGET_AM335X_SL50
+	bool "Support am335x_sl50"
+	select DM
+	select DM_SERIAL
+	select DM_GPIO
+
+config TARGET_BAV335X
+	bool "Support bav335x"
+	select DM
+	select DM_SERIAL
+	help
+	  The BAV335x OEM Network Processor integrates all the functions of an
+	  embedded network computer in a small, easy to use SODIMM module which
+	  incorporates the popular Texas Instruments Sitara 32bit ARM Coretex-A8
+	  processor, with fast DDR3 512MB SDRAM, 4GB of embedded MMC and a Gigabit
+	  ethernet with simple connection to external connectors.
+
+	  For more information, visit: http://birdland.com/oem
+
+config TARGET_CM_T335
+	bool "Support cm_t335"
+	select DM
+	select DM_SERIAL
+	select DM_GPIO
+
+config TARGET_PCM051
+	bool "Support pcm051"
+	select DM
+	select DM_SERIAL
+	select DM_GPIO
+
+config TARGET_PENGWYN
+	bool "Support pengwyn"
+	select DM
+	select DM_SERIAL
+	select DM_GPIO
+
+config TARGET_PEPPER
+	bool "Support pepper"
+	select DM
+	select DM_SERIAL
+	select DM_GPIO
+
+endchoice
+
+endif
+
+if AM43XX
+
+config SPL_EXT_SUPPORT
+	default y
+
+config SPL_GPIO_SUPPORT
+	default y
+
+config SPL_I2C_SUPPORT
+	default y
+
+config TARGET_AM43XX_EVM
+	bool "Support am43xx_evm"
+	select TI_I2C_BOARD_DETECT
+	help
+	  This option specifies support for the AM43xx
+	  GP and HS EVM development platforms.The AM437x
+	  GP EVM is a standalone test, development, and
+	  evaluation module system that enables developers
+	  to write software and develop hardware around
+	  an AM43xx processor subsystem.
+endif
+
+if AM43XX || AM33XX
+config ISW_ENTRY_ADDR
+	hex "Address in memory or XIP flash of bootloader entry point"
+	help
+	  After any reset, the boot ROM on the AM43XX SOC
+	  searches the boot media for a valid boot image.
+	  For non-XIP devices, the ROM then copies the
+	  image into internal memory.
+	  For all boot modes, after the ROM processes the
+	  boot image it eventually computes the entry
+	  point address depending on the device type
+	  (secure/non-secure), boot media (xip/non-xip) and
+	  image headers.
+	default 0x402F4000
+
+config PUB_ROM_DATA_SIZE
+	hex "Size in bytes of the L3 SRAM reserved by ROM to store data"
+	help
+	  During the device boot, the public ROM uses the top of
+	  the public L3 OCMC RAM to store r/w data like stack,
+	  heap, globals etc. When the ROM is copying the boot
+	  image from the boot media into memory, the image must
+	  not spill over into this area. This value can be used
+	  during compile time to determine the maximum size of a
+	  boot image. Once the ROM transfers control to the boot
+	  image, this area is no longer used, and can be reclaimed
+	  for run time use by the boot image.
+	default 0x8400
+endif