diff options
Diffstat (limited to 'arch/arm/mach-omap2/omap4/hwinit.c')
| -rw-r--r-- | arch/arm/mach-omap2/omap4/hwinit.c | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/omap4/hwinit.c b/arch/arm/mach-omap2/omap4/hwinit.c new file mode 100644 index 0000000000..7c6638ca80 --- /dev/null +++ b/arch/arm/mach-omap2/omap4/hwinit.c @@ -0,0 +1,177 @@ +/* + * + * Common functions for OMAP4 based boards + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Author : + * Aneesh V <aneesh@ti.com> + * Steve Sakoman <steve@sakoman.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <asm/armv7.h> +#include <asm/arch/cpu.h> +#include <asm/arch/sys_proto.h> +#include <linux/sizes.h> +#include <asm/emif.h> +#include <asm/arch/gpio.h> +#include <asm/omap_common.h> + +DECLARE_GLOBAL_DATA_PTR; + +u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV; + +static const struct gpio_bank gpio_bank_44xx[6] = { + { (void *)OMAP44XX_GPIO1_BASE }, + { (void *)OMAP44XX_GPIO2_BASE }, + { (void *)OMAP44XX_GPIO3_BASE }, + { (void *)OMAP44XX_GPIO4_BASE }, + { (void *)OMAP44XX_GPIO5_BASE }, + { (void *)OMAP44XX_GPIO6_BASE }, +}; + +const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx; + +#ifdef CONFIG_SPL_BUILD +/* + * Some tuning of IOs for optimal power and performance + */ +void do_io_settings(void) +{ + u32 lpddr2io; + + u32 omap4_rev = omap_revision(); + + if (omap4_rev == OMAP4430_ES1_0) + lpddr2io = CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN; + else if (omap4_rev == OMAP4430_ES2_0) + lpddr2io = CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER; + else + lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN; + + /* EMIF1 */ + writel(lpddr2io, (*ctrl)->control_lpddr2io1_0); + writel(lpddr2io, (*ctrl)->control_lpddr2io1_1); + /* No pull for GR10 as per hw team's recommendation */ + writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, + (*ctrl)->control_lpddr2io1_2); + writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io1_3); + + /* EMIF2 */ + writel(lpddr2io, (*ctrl)->control_lpddr2io2_0); + writel(lpddr2io, (*ctrl)->control_lpddr2io2_1); + /* No pull for GR10 as per hw team's recommendation */ + writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, + (*ctrl)->control_lpddr2io2_2); + writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io2_3); + + /* + * Some of these settings (TRIM values) come from eFuse and are + * in turn programmed in the eFuse at manufacturing time after + * calibration of the device. Do the software over-ride only if + * the device is not correctly trimmed + */ + if (!(readl((*ctrl)->control_std_fuse_opp_bgap) & 0xFFFF)) { + + writel(LDOSRAM_VOLT_CTRL_OVERRIDE, + (*ctrl)->control_ldosram_iva_voltage_ctrl); + + writel(LDOSRAM_VOLT_CTRL_OVERRIDE, + (*ctrl)->control_ldosram_mpu_voltage_ctrl); + + writel(LDOSRAM_VOLT_CTRL_OVERRIDE, + (*ctrl)->control_ldosram_core_voltage_ctrl); + } + + /* + * Over-ride the register + * i. unconditionally for all 4430 + * ii. only if un-trimmed for 4460 + */ + if (!readl((*ctrl)->control_efuse_1)) + writel(CONTROL_EFUSE_1_OVERRIDE, (*ctrl)->control_efuse_1); + + if ((omap4_rev < OMAP4460_ES1_0) || !readl((*ctrl)->control_efuse_2)) + writel(CONTROL_EFUSE_2_OVERRIDE, (*ctrl)->control_efuse_2); +} +#endif /* CONFIG_SPL_BUILD */ + +/* dummy fuction for omap4 */ +void config_data_eye_leveling_samples(u32 emif_base) +{ +} + +void init_omap_revision(void) +{ + /* + * For some of the ES2/ES1 boards ID_CODE is not reliable: + * Also, ES1 and ES2 have different ARM revisions + * So use ARM revision for identification + */ + unsigned int arm_rev = cortex_rev(); + + switch (arm_rev) { + case MIDR_CORTEX_A9_R0P1: + *omap_si_rev = OMAP4430_ES1_0; + break; + case MIDR_CORTEX_A9_R1P2: + switch (readl(CONTROL_ID_CODE)) { + case OMAP4_CONTROL_ID_CODE_ES2_0: + *omap_si_rev = OMAP4430_ES2_0; + break; + case OMAP4_CONTROL_ID_CODE_ES2_1: + *omap_si_rev = OMAP4430_ES2_1; + break; + case OMAP4_CONTROL_ID_CODE_ES2_2: + *omap_si_rev = OMAP4430_ES2_2; + break; + default: + *omap_si_rev = OMAP4430_ES2_0; + break; + } + break; + case MIDR_CORTEX_A9_R1P3: + *omap_si_rev = OMAP4430_ES2_3; + break; + case MIDR_CORTEX_A9_R2P10: + switch (readl(CONTROL_ID_CODE)) { + case OMAP4470_CONTROL_ID_CODE_ES1_0: + *omap_si_rev = OMAP4470_ES1_0; + break; + case OMAP4460_CONTROL_ID_CODE_ES1_1: + *omap_si_rev = OMAP4460_ES1_1; + break; + case OMAP4460_CONTROL_ID_CODE_ES1_0: + default: + *omap_si_rev = OMAP4460_ES1_0; + break; + } + break; + default: + *omap_si_rev = OMAP4430_SILICON_ID_INVALID; + break; + } +} + +void omap_die_id(unsigned int *die_id) +{ + die_id[0] = readl((*ctrl)->control_std_fuse_die_id_0); + die_id[1] = readl((*ctrl)->control_std_fuse_die_id_1); + die_id[2] = readl((*ctrl)->control_std_fuse_die_id_2); + die_id[3] = readl((*ctrl)->control_std_fuse_die_id_3); +} + +#ifndef CONFIG_SYS_L2CACHE_OFF +void v7_outer_cache_enable(void) +{ + omap_smc1(OMAP4_SERVICE_PL310_CONTROL_REG_SET, 1); +} + +void v7_outer_cache_disable(void) +{ + omap_smc1(OMAP4_SERVICE_PL310_CONTROL_REG_SET, 0); +} +#endif /* !CONFIG_SYS_L2CACHE_OFF */ |