summaryrefslogtreecommitdiff
path: root/arch/arm/mach-rockchip
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-rockchip')
-rw-r--r--arch/arm/mach-rockchip/Kconfig7
-rw-r--r--arch/arm/mach-rockchip/Makefile1
-rw-r--r--arch/arm/mach-rockchip/board.c104
3 files changed, 112 insertions, 0 deletions
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 81dee9e5c7..4d983f8fce 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -229,6 +229,13 @@ config TPL_ROCKCHIP_BACK_TO_BROM
SPL will return to the boot rom, which will then load the U-Boot
binary to keep going on.
+config ROCKCHIP_COMMON_BOARD
+ bool "Rockchip common board file"
+ help
+ Rockchip SoCs have similar boot process, Common board file is mainly
+ in charge of common process of board_init() and board_late_init() for
+ U-Boot proper.
+
config SPL_ROCKCHIP_COMMON_BOARD
bool "Rockchip SPL common board file"
depends on SPL
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 5cb2c6dcc9..7d2a227794 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -20,6 +20,7 @@ ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
# we can have the preprocessor correctly recognise both 0x0 and 0
# meaning "turn it off".
obj-y += boot_mode.o
+obj-$(CONFIG_ROCKCHIP_COMMON_BOARD) += board.o
obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board.o
obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128-board.o
diff --git a/arch/arm/mach-rockchip/board.c b/arch/arm/mach-rockchip/board.c
new file mode 100644
index 0000000000..b2a88e789d
--- /dev/null
+++ b/arch/arm/mach-rockchip/board.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019 Rockchip Electronics Co., Ltd.
+ */
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <ram.h>
+#include <syscon.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/boot_mode.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/periph.h>
+#include <power/regulator.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+__weak int rk_board_late_init(void)
+{
+ return 0;
+}
+
+int board_late_init(void)
+{
+ setup_boot_mode();
+
+ return rk_board_late_init();
+}
+
+int board_init(void)
+{
+ int ret;
+
+#ifdef CONFIG_DM_REGULATOR
+ ret = regulators_enable_boot_on(false);
+ if (ret)
+ debug("%s: Cannot enable boot on regulator\n", __func__);
+#endif
+
+ return 0;
+}
+
+#if !defined(CONFIG_SYS_DCACHE_OFF) && !defined(CONFIG_ARM64)
+void enable_caches(void)
+{
+ /* Enable D-cache. I-cache is already enabled in start.S */
+ dcache_enable();
+}
+#endif
+
+#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG)
+#include <usb.h>
+#include <usb/dwc2_udc.h>
+
+static struct dwc2_plat_otg_data otg_data = {
+ .rx_fifo_sz = 512,
+ .np_tx_fifo_sz = 16,
+ .tx_fifo_sz = 128,
+};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+ int node;
+ const char *mode;
+ bool matched = false;
+ const void *blob = gd->fdt_blob;
+
+ /* find the usb_otg node */
+ node = fdt_node_offset_by_compatible(blob, -1, "snps,dwc2");
+
+ while (node > 0) {
+ mode = fdt_getprop(blob, node, "dr_mode", NULL);
+ if (mode && strcmp(mode, "otg") == 0) {
+ matched = true;
+ break;
+ }
+
+ node = fdt_node_offset_by_compatible(blob, node, "snps,dwc2");
+ }
+ if (!matched) {
+ debug("Not found usb_otg device\n");
+ return -ENODEV;
+ }
+ otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg");
+
+ return dwc2_udc_probe(&otg_data);
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+ return 0;
+}
+#endif
+
+#if CONFIG_IS_ENABLED(FASTBOOT)
+int fastboot_set_reboot_flag(void)
+{
+ printf("Setting reboot to fastboot flag ...\n");
+ /* Set boot mode to fastboot */
+ writel(BOOT_FASTBOOT, CONFIG_ROCKCHIP_BOOT_MODE_REG);
+
+ return 0;
+}
+#endif