diff options
Diffstat (limited to 'arch/arm/mach-tegra/tegra30/cpu.c')
| -rw-r--r-- | arch/arm/mach-tegra/tegra30/cpu.c | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/arch/arm/mach-tegra/tegra30/cpu.c b/arch/arm/mach-tegra/tegra30/cpu.c new file mode 100644 index 0000000000..c76e74c65f --- /dev/null +++ b/arch/arm/mach-tegra/tegra30/cpu.c @@ -0,0 +1,183 @@ +/* + * Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/flow.h> +#include <asm/arch/tegra.h> +#include <asm/arch-tegra/clk_rst.h> +#include <asm/arch-tegra/pmc.h> +#include <asm/arch-tegra/tegra_i2c.h> +#include "../cpu.h" + +/* Tegra30-specific CPU init code */ +void tegra_i2c_ll_write_addr(uint addr, uint config) +{ + struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE; + + writel(addr, ®->cmd_addr0); + writel(config, ®->cnfg); +} + +void tegra_i2c_ll_write_data(uint data, uint config) +{ + struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE; + + writel(data, ®->cmd_data1); + writel(config, ®->cnfg); +} + +#define TPS62366A_I2C_ADDR 0xC0 +#define TPS62366A_SET1_REG 0x01 +#define TPS62366A_SET1_DATA (0x4600 | TPS62366A_SET1_REG) + +#define TPS62361B_I2C_ADDR 0xC0 +#define TPS62361B_SET3_REG 0x03 +#define TPS62361B_SET3_DATA (0x4600 | TPS62361B_SET3_REG) + +#define TPS65911_I2C_ADDR 0x5A +#define TPS65911_VDDCTRL_OP_REG 0x28 +#define TPS65911_VDDCTRL_SR_REG 0x27 +#define TPS65911_VDDCTRL_OP_DATA (0x2400 | TPS65911_VDDCTRL_OP_REG) +#define TPS65911_VDDCTRL_SR_DATA (0x0100 | TPS65911_VDDCTRL_SR_REG) +#define I2C_SEND_2_BYTES 0x0A02 + +static void enable_cpu_power_rail(void) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + u32 reg; + + debug("enable_cpu_power_rail entry\n"); + reg = readl(&pmc->pmc_cntrl); + reg |= CPUPWRREQ_OE; + writel(reg, &pmc->pmc_cntrl); + + /* Set VDD_CORE to 1.200V. */ +#ifdef CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1 + tegra_i2c_ll_write_addr(TPS62366A_I2C_ADDR, 2); + tegra_i2c_ll_write_data(TPS62366A_SET1_DATA, I2C_SEND_2_BYTES); +#endif +#ifdef CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3 + tegra_i2c_ll_write_addr(TPS62361B_I2C_ADDR, 2); + tegra_i2c_ll_write_data(TPS62361B_SET3_DATA, I2C_SEND_2_BYTES); +#endif + udelay(1000); + + /* + * Bring up CPU VDD via the TPS65911x PMIC on the DVC I2C bus. + * First set VDD to 1.0125V, then enable the VDD regulator. + */ + tegra_i2c_ll_write_addr(TPS65911_I2C_ADDR, 2); + tegra_i2c_ll_write_data(TPS65911_VDDCTRL_OP_DATA, I2C_SEND_2_BYTES); + udelay(1000); + tegra_i2c_ll_write_data(TPS65911_VDDCTRL_SR_DATA, I2C_SEND_2_BYTES); + udelay(10 * 1000); +} + +/** + * The T30 requires some special clock initialization, including setting up + * the dvc i2c, turning on mselect and selecting the G CPU cluster + */ +void t30_init_clocks(void) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE; + u32 val; + + debug("t30_init_clocks entry\n"); + /* Set active CPU cluster to G */ + clrbits_le32(flow->cluster_control, 1 << 0); + + writel(SUPER_SCLK_ENB_MASK, &clkrst->crc_super_sclk_div); + + val = (0 << CLK_SYS_RATE_HCLK_DISABLE_SHIFT) | + (1 << CLK_SYS_RATE_AHB_RATE_SHIFT) | + (0 << CLK_SYS_RATE_PCLK_DISABLE_SHIFT) | + (0 << CLK_SYS_RATE_APB_RATE_SHIFT); + writel(val, &clkrst->crc_clk_sys_rate); + + /* Put i2c, mselect in reset and enable clocks */ + reset_set_enable(PERIPH_ID_DVC_I2C, 1); + clock_set_enable(PERIPH_ID_DVC_I2C, 1); + reset_set_enable(PERIPH_ID_MSELECT, 1); + clock_set_enable(PERIPH_ID_MSELECT, 1); + + /* Switch MSELECT clock to PLLP (00) and use a divisor of 2 */ + clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0, 2); + + /* + * Our high-level clock routines are not available prior to + * relocation. We use the low-level functions which require a + * hard-coded divisor. Use CLK_M with divide by (n + 1 = 17) + */ + clock_ll_set_source_divisor(PERIPH_ID_DVC_I2C, 3, 16); + + /* + * Give clocks time to stabilize, then take i2c and mselect out of + * reset + */ + udelay(1000); + reset_set_enable(PERIPH_ID_DVC_I2C, 0); + reset_set_enable(PERIPH_ID_MSELECT, 0); +} + +static void set_cpu_running(int run) +{ + struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE; + + debug("set_cpu_running entry, run = %d\n", run); + writel(run ? FLOW_MODE_NONE : FLOW_MODE_STOP, &flow->halt_cpu_events); +} + +void start_cpu(u32 reset_vector) +{ + debug("start_cpu entry, reset_vector = %x\n", reset_vector); + t30_init_clocks(); + + /* Enable VDD_CPU */ + enable_cpu_power_rail(); + + set_cpu_running(0); + + /* Hold the CPUs in reset */ + reset_A9_cpu(1); + + /* Disable the CPU clock */ + enable_cpu_clock(0); + + /* Enable CoreSight */ + clock_enable_coresight(1); + + /* + * Set the entry point for CPU execution from reset, + * if it's a non-zero value. + */ + if (reset_vector) + writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR); + + /* Enable the CPU clock */ + enable_cpu_clock(1); + + /* If the CPU doesn't already have power, power it up */ + powerup_cpu(); + + /* Take the CPU out of reset */ + reset_A9_cpu(0); + + set_cpu_running(1); +} |