10 files changed, 0 insertions, 649 deletions

diff --git a/arch/arm/mach-uniphier/ph1-pro4/Makefile b/arch/arm/mach-uniphier/ph1-pro4/Makefile
deleted file mode 100644
index e8b2c9e8ac..0000000000
--- a/arch/arm/mach-uniphier/ph1-pro4/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-ifdef CONFIG_SPL_BUILD
-obj-y += pll_init.o early_clkrst_init.o \
-	pll_spectrum.o umc_init.o ddrphy_init.o
-obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc_init.o
-else
-obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o
-endif
-
-obj-y += boot-mode.o
diff --git a/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c b/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c
deleted file mode 100644
index 54a2510b97..0000000000
--- a/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <spl.h>
-#include <linux/io.h>
-#include <mach/boot-device.h>
-#include <mach/sg-regs.h>
-#include <mach/sbc-regs.h>
-
-struct boot_device_info boot_device_table[] = {
-	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 128KB, Addr 4)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 128KB, Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 256KB, Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, EraseSize 512KB, Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, EraseSize   1MB, Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, EraseSize   1MB, Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, EraseSize 128KB, Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, EraseSize 256KB, Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, EraseSize 512KB, Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, EraseSize 512KB, Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, ONFI,            Addr 4)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC  8, ONFI,            Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI,            Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, ONFI,            Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, ONFI,            Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC  8, ONFI,            Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI,            Addr 5)"},
-	{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, ONFI,            Addr 5)"},
-	{BOOT_DEVICE_MMC1, "eMMC Boot (3.3V)"},
-	{BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"},
-	{BOOT_DEVICE_NONE, "Reserved"},
-	{BOOT_DEVICE_NONE, "Reserved"},
-	{BOOT_DEVICE_NONE, "Reserved"},
-	{BOOT_DEVICE_NONE, "Reserved"},
-	{BOOT_DEVICE_NONE, "Reserved"},
-	{BOOT_DEVICE_NONE, "Reserved"},
-	{ /* sentinel */ }
-};
-
-int get_boot_mode_sel(void)
-{
-	return (readl(SG_PINMON0) >> 1) & 0x1f;
-}
-
-u32 spl_boot_device(void)
-{
-	int boot_mode;
-
-	if (boot_is_swapped())
-		return BOOT_DEVICE_NOR;
-
-	boot_mode = get_boot_mode_sel();
-
-	return boot_device_table[boot_mode].type;
-}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c b/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c
deleted file mode 100644
index 46cace77e5..0000000000
--- a/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <linux/io.h>
-#include <mach/sc-regs.h>
-
-void clkrst_init(void)
-{
-	u32 tmp;
-
-	/* deassert reset */
-	tmp = readl(SC_RSTCTRL);
-#ifdef CONFIG_USB_XHCI_UNIPHIER
-	tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_USB3C0 |
-		SC_RSTCTRL_NRST_GIO;
-#endif
-#ifdef CONFIG_UNIPHIER_ETH
-	tmp |= SC_RSTCTRL_NRST_ETHER;
-#endif
-#ifdef CONFIG_USB_EHCI_UNIPHIER
-	tmp |= SC_RSTCTRL_NRST_STDMAC;
-#endif
-#ifdef CONFIG_NAND_DENALI
-	tmp |= SC_RSTCTRL_NRST_NAND;
-#endif
-	writel(tmp, SC_RSTCTRL);
-	readl(SC_RSTCTRL); /* dummy read */
-
-#ifdef CONFIG_USB_XHCI_UNIPHIER
-	tmp = readl(SC_RSTCTRL2);
-	tmp |= SC_RSTCTRL2_NRST_USB3B1 | SC_RSTCTRL2_NRST_USB3C1;
-	writel(tmp, SC_RSTCTRL2);
-	readl(SC_RSTCTRL2); /* dummy read */
-#endif
-
-	/* privide clocks */
-	tmp = readl(SC_CLKCTRL);
-#ifdef CONFIG_USB_XHCI_UNIPHIER
-	tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 |
-		SC_CLKCTRL_CEN_GIO;
-#endif
-#ifdef CONFIG_UNIPHIER_ETH
-	tmp |= SC_CLKCTRL_CEN_ETHER;
-#endif
-#ifdef CONFIG_USB_EHCI_UNIPHIER
-	tmp |= SC_CLKCTRL_CEN_MIO | SC_CLKCTRL_CEN_STDMAC;
-#endif
-#ifdef CONFIG_NAND_DENALI
-	tmp |= SC_CLKCTRL_CEN_NAND;
-#endif
-	writel(tmp, SC_CLKCTRL);
-	readl(SC_CLKCTRL); /* dummy read */
-}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c b/arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c
deleted file mode 100644
index 61ddcf4ec6..0000000000
--- a/arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <linux/types.h>
-#include <linux/io.h>
-#include <mach/ddrphy-regs.h>
-
-void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size)
-{
-	u32 tmp;
-
-	writel(0x0300c473, &phy->pgcr[1]);
-	if (freq == 1333) {
-		writel(0x0a806844, &phy->ptr[0]);
-		writel(0x208e0124, &phy->ptr[1]);
-	} else {
-		writel(0x0c807d04, &phy->ptr[0]);
-		writel(0x2710015E, &phy->ptr[1]);
-	}
-	writel(0x00083DEF, &phy->ptr[2]);
-	if (freq == 1333) {
-		writel(0x0f051616, &phy->ptr[3]);
-		writel(0x06ae08d6, &phy->ptr[4]);
-	} else {
-		writel(0x12061A80, &phy->ptr[3]);
-		writel(0x08027100, &phy->ptr[4]);
-	}
-	writel(0xF004001A, &phy->dsgcr);
-
-	/* change the value of the on-die pull-up/pull-down registors */
-	tmp = readl(&phy->dxccr);
-	tmp &= ~0x0ee0;
-	tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM;
-	writel(tmp, &phy->dxccr);
-
-	writel(0x0000040B, &phy->dcr);
-	if (freq == 1333) {
-		writel(0x85589955, &phy->dtpr[0]);
-		if (size == 1)
-			writel(0x1a8363c0, &phy->dtpr[1]);
-		else
-			writel(0x1a8363c0, &phy->dtpr[1]);
-		writel(0x5002c200, &phy->dtpr[2]);
-		writel(0x00000b51, &phy->mr0);
-	} else {
-		writel(0x999cbb66, &phy->dtpr[0]);
-		if (size == 1)
-			writel(0x1a878400, &phy->dtpr[1]);
-		else
-			writel(0x1a878400, &phy->dtpr[1]);
-		writel(0xa00214f8, &phy->dtpr[2]);
-		writel(0x00000d71, &phy->mr0);
-	}
-	writel(0x00000006, &phy->mr1);
-	if (freq == 1333)
-		writel(0x00000290, &phy->mr2);
-	else
-		writel(0x00000298, &phy->mr2);
-
-	writel(0x00000000, &phy->mr3);
-
-	while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE))
-		;
-
-	writel(0x0300C473, &phy->pgcr[1]);
-	writel(0x0000005D, &phy->zq[0].cr[1]);
-}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c b/arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c
deleted file mode 100644
index 60204b53ba..0000000000
--- a/arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <spl.h>
-#include <linux/io.h>
-#include <mach/sc-regs.h>
-
-void early_clkrst_init(void)
-{
-	u32 tmp;
-
-	/* deassert reset */
-	tmp = readl(SC_RSTCTRL);
-
-	tmp |= SC_RSTCTRL_NRST_UMC1 | SC_RSTCTRL_NRST_UMC0;
-	if (spl_boot_device() != BOOT_DEVICE_NAND)
-		tmp &= ~SC_RSTCTRL_NRST_NAND;
-	writel(tmp, SC_RSTCTRL);
-	readl(SC_RSTCTRL); /* dummy read */
-
-	/* privide clocks */
-	tmp = readl(SC_CLKCTRL);
-	tmp |= SC_CLKCTRL_CEN_UMC | SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI;
-	writel(tmp, SC_CLKCTRL);
-	readl(SC_CLKCTRL); /* dummy read */
-}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c b/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c
deleted file mode 100644
index bfaff4fea9..0000000000
--- a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <linux/io.h>
-#include <mach/sg-regs.h>
-
-void pin_init(void)
-{
-	/* Comment format:    PAD Name -> Function Name */
-
-#ifdef CONFIG_NAND_DENALI
-	sg_set_pinsel(40, 0, 4, 8);	/* NFD0   -> NFD0 */
-	sg_set_pinsel(41, 0, 4, 8);	/* NFD1   -> NFD1 */
-	sg_set_pinsel(42, 0, 4, 8);	/* NFD2   -> NFD2 */
-	sg_set_pinsel(43, 0, 4, 8);	/* NFD3   -> NFD3 */
-	sg_set_pinsel(44, 0, 4, 8);	/* NFD4   -> NFD4 */
-	sg_set_pinsel(45, 0, 4, 8);	/* NFD5   -> NFD5 */
-	sg_set_pinsel(46, 0, 4, 8);	/* NFD6   -> NFD6 */
-	sg_set_pinsel(47, 0, 4, 8);	/* NFD7   -> NFD7 */
-	sg_set_pinsel(48, 0, 4, 8);	/* NFALE  -> NFALE */
-	sg_set_pinsel(49, 0, 4, 8);	/* NFCLE  -> NFCLE */
-	sg_set_pinsel(50, 0, 4, 8);	/* XNFRE  -> XNFRE */
-	sg_set_pinsel(51, 0, 4, 8);	/* XNFWE  -> XNFWE */
-	sg_set_pinsel(52, 0, 4, 8);	/* XNFWP  -> XNFWP */
-	sg_set_pinsel(53, 0, 4, 8);	/* XNFCE0 -> XNFCE0 */
-	sg_set_pinsel(54, 0, 4, 8);	/* NRYBY0 -> NRYBY0 */
-	/* sg_set_pinsel(131, 1, 4, 8); */	/* RXD2   -> NRYBY1 */
-	/* sg_set_pinsel(132, 1, 4, 8); */	/* TXD2   -> XNFCE1 */
-#endif
-
-#ifdef CONFIG_USB_XHCI_UNIPHIER
-	sg_set_pinsel(180, 0, 4, 8);	/* USB0VBUS -> USB0VBUS */
-	sg_set_pinsel(181, 0, 4, 8);	/* USB0OD   -> USB0OD */
-	sg_set_pinsel(182, 0, 4, 8);	/* USB1VBUS -> USB1VBUS */
-	sg_set_pinsel(183, 0, 4, 8);	/* USB1OD   -> USB1OD */
-#endif
-
-#ifdef CONFIG_USB_EHCI_UNIPHIER
-	sg_set_pinsel(184, 0, 4, 8);	/* USB2VBUS -> USB2VBUS */
-	sg_set_pinsel(185, 0, 4, 8);	/* USB2OD   -> USB2OD */
-	sg_set_pinsel(187, 0, 4, 8);	/* USB3VBUS -> USB3VBUS */
-	sg_set_pinsel(188, 0, 4, 8);	/* USB3OD   -> USB3OD */
-#endif
-
-	writel(1, SG_LOADPINCTRL);
-}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/pll_init.c b/arch/arm/mach-uniphier/ph1-pro4/pll_init.c
deleted file mode 100644
index 8ae8ed65b8..0000000000
--- a/arch/arm/mach-uniphier/ph1-pro4/pll_init.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/io.h>
-#include <mach/sc-regs.h>
-#include <mach/sg-regs.h>
-
-#undef DPLL_SSC_RATE_1PER
-
-static void dpll_init(void)
-{
-	u32 tmp;
-
-	/*
-	 * Set Frequency
-	 * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz)
-	 * to FOUT ( DPLLCTRL.bit[29:20] )
-	 */
-	tmp = readl(SC_DPLLCTRL);
-	tmp &= ~(0x000f0000);
-#if CONFIG_DDR_FREQ == 1600
-	tmp |= 0x000c0000;
-#elif CONFIG_DDR_FREQ == 1333
-	tmp |= 0x000d0000;
-#else
-# error "Unsupported frequency"
-#endif
-
-	/*
-	 * Set Moduration rate
-	 * Set 0x0(1%)/0x1(2%) to SSC_RATE(DPLLCTRL.bit[15])
-	 */
-#if defined(DPLL_SSC_RATE_1PER)
-	tmp &= ~0x00008000;
-#else
-	tmp |= 0x00008000;
-#endif
-	writel(tmp, SC_DPLLCTRL);
-
-	tmp = readl(SC_DPLLCTRL2);
-	tmp |= SC_DPLLCTRL2_NRSTDS;
-	writel(tmp, SC_DPLLCTRL2);
-}
-
-static void vpll_init(void)
-{
-	u32 tmp, clk_mode_axosel;
-
-	/* Set VPLL27A &  VPLL27B */
-	tmp = readl(SG_PINMON0);
-	clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
-
-	/* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */
-	if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
-	    clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ)
-		return;
-
-	/* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
-	tmp = readl(SC_VPLL27ACTRL);
-	tmp |= 0x00000001;
-	writel(tmp, SC_VPLL27ACTRL);
-	tmp = readl(SC_VPLL27BCTRL);
-	tmp |= 0x00000001;
-	writel(tmp, SC_VPLL27BCTRL);
-
-	/* Unset VPLA_K_LD and VPLB_K_LD bit */
-	tmp = readl(SC_VPLL27ACTRL3);
-	tmp &= ~0x10000000;
-	writel(tmp, SC_VPLL27ACTRL3);
-	tmp = readl(SC_VPLL27BCTRL3);
-	tmp &= ~0x10000000;
-	writel(tmp, SC_VPLL27BCTRL3);
-
-	/* Set VPLA_M and VPLB_M to 0x20 */
-	tmp = readl(SC_VPLL27ACTRL2);
-	tmp &= ~0x0000007f;
-	tmp |= 0x00000020;
-	writel(tmp, SC_VPLL27ACTRL2);
-	tmp = readl(SC_VPLL27BCTRL2);
-	tmp &= ~0x0000007f;
-	tmp |= 0x00000020;
-	writel(tmp, SC_VPLL27BCTRL2);
-
-	if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
-	    clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) {
-		/* Set VPLA_K and VPLB_K for AXO: 25MHz */
-		tmp = readl(SC_VPLL27ACTRL3);
-		tmp &= ~0x000fffff;
-		tmp |= 0x00066666;
-		writel(tmp, SC_VPLL27ACTRL3);
-		tmp = readl(SC_VPLL27BCTRL3);
-		tmp &= ~0x000fffff;
-		tmp |= 0x00066666;
-		writel(tmp, SC_VPLL27BCTRL3);
-	} else {
-		/* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */
-		tmp = readl(SC_VPLL27ACTRL3);
-		tmp &= ~0x000fffff;
-		tmp |= 0x000f5800;
-		writel(tmp, SC_VPLL27ACTRL3);
-		tmp = readl(SC_VPLL27BCTRL3);
-		tmp &= ~0x000fffff;
-		tmp |= 0x000f5800;
-		writel(tmp, SC_VPLL27BCTRL3);
-	}
-
-	/* wait 1 usec */
-	udelay(1);
-
-	/* Set VPLA_K_LD and VPLB_K_LD to load K parameters */
-	tmp = readl(SC_VPLL27ACTRL3);
-	tmp |= 0x10000000;
-	writel(tmp, SC_VPLL27ACTRL3);
-	tmp = readl(SC_VPLL27BCTRL3);
-	tmp |= 0x10000000;
-	writel(tmp, SC_VPLL27BCTRL3);
-
-	/* Unset VPLA_SNRST and VPLB_SNRST bit */
-	tmp = readl(SC_VPLL27ACTRL2);
-	tmp |= 0x10000000;
-	writel(tmp, SC_VPLL27ACTRL2);
-	tmp = readl(SC_VPLL27BCTRL2);
-	tmp |= 0x10000000;
-	writel(tmp, SC_VPLL27BCTRL2);
-
-	/* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
-	tmp = readl(SC_VPLL27ACTRL);
-	tmp &= ~0x00000001;
-	writel(tmp, SC_VPLL27ACTRL);
-	tmp = readl(SC_VPLL27BCTRL);
-	tmp &= ~0x00000001;
-	writel(tmp, SC_VPLL27BCTRL);
-}
-
-void pll_init(void)
-{
-	dpll_init();
-	vpll_init();
-
-	/*
-	 * Wait 500 usec until dpll get stable
-	 * We wait 1 usec in vpll_init() so 1 usec can be saved here.
-	 */
-	udelay(499);
-}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c b/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c
deleted file mode 100644
index fcf2ad282a..0000000000
--- a/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/io.h>
-#include <mach/sc-regs.h>
-
-void enable_dpll_ssc(void)
-{
-	u32 tmp;
-
-	tmp = readl(SC_DPLLCTRL);
-	tmp |= SC_DPLLCTRL_SSC_EN;
-	writel(tmp, SC_DPLLCTRL);
-}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c b/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c
deleted file mode 100644
index 685f9c736c..0000000000
--- a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/io.h>
-#include <mach/sbc-regs.h>
-#include <mach/sg-regs.h>
-
-void sbc_init(void)
-{
-	/*
-	 * Only CS1 is connected to support card.
-	 * BKSZ[1:0] should be set to "01".
-	 */
-	writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10);
-	writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11);
-	writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12);
-	writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14);
-
-	if (boot_is_swapped()) {
-		/*
-		 * Boot Swap On: boot from external NOR/SRAM
-		 * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff.
-		 *
-		 * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank
-		 * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals
-		 */
-		writel(0x0000bc01, SBBASE0);
-	} else {
-		/*
-		 * Boot Swap Off: boot from mask ROM
-		 * 0x40000000-0x41ffffff: mask ROM
-		 * 0x42000000-0x43efffff: memory bank (31MB)
-		 * 0x43f00000-0x43ffffff: peripherals (1MB)
-		 */
-		writel(0x0000be01, SBBASE0); /* dummy */
-		writel(0x0200be01, SBBASE1);
-	}
-}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/umc_init.c b/arch/arm/mach-uniphier/ph1-pro4/umc_init.c
deleted file mode 100644
index bd8b9d83b2..0000000000
--- a/arch/arm/mach-uniphier/ph1-pro4/umc_init.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/io.h>
-#include <mach/umc-regs.h>
-#include <mach/ddrphy-regs.h>
-
-static void umc_start_ssif(void __iomem *ssif_base)
-{
-	writel(0x00000001, ssif_base + 0x0000b004);
-	writel(0xffffffff, ssif_base + 0x0000c004);
-	writel(0x07ffffff, ssif_base + 0x0000c008);
-	writel(0x00000001, ssif_base + 0x0000b000);
-	writel(0x00000001, ssif_base + 0x0000c000);
-
-	writel(0x03010100, ssif_base + UMC_HDMCHSEL);
-	writel(0x03010101, ssif_base + UMC_MDMCHSEL);
-	writel(0x03010100, ssif_base + UMC_DVCCHSEL);
-	writel(0x03010100, ssif_base + UMC_DMDCHSEL);
-
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH);
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0);
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0);
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0);
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1);
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1);
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1);
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC);
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC);
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST);
-	writel(0x00000000, ssif_base + 0x0000c044);		/* DCGIV_SSIF_REG */
-
-	writel(0x00000001, ssif_base + UMC_CPURST);
-	writel(0x00000001, ssif_base + UMC_IDSRST);
-	writel(0x00000001, ssif_base + UMC_IXMRST);
-	writel(0x00000001, ssif_base + UMC_HDMRST);
-	writel(0x00000001, ssif_base + UMC_MDMRST);
-	writel(0x00000001, ssif_base + UMC_HDDRST);
-	writel(0x00000001, ssif_base + UMC_MDDRST);
-	writel(0x00000001, ssif_base + UMC_SIORST);
-	writel(0x00000001, ssif_base + UMC_GIORST);
-	writel(0x00000001, ssif_base + UMC_HD2RST);
-	writel(0x00000001, ssif_base + UMC_VIORST);
-	writel(0x00000001, ssif_base + UMC_DVCRST);
-	writel(0x00000001, ssif_base + UMC_RGLRST);
-	writel(0x00000001, ssif_base + UMC_VPERST);
-	writel(0x00000001, ssif_base + UMC_AIORST);
-	writel(0x00000001, ssif_base + UMC_DMDRST);
-}
-
-static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
-			      int size, int freq)
-{
-	writel(0x66bb0f17, dramcont + UMC_CMDCTLA);
-	writel(0x18c6aa44, dramcont + UMC_CMDCTLB);
-	writel(0x5101387f, dramcont + UMC_INITCTLA);
-	writel(0x43030d3f, dramcont + UMC_INITCTLB);
-	writel(0x00ff00ff, dramcont + UMC_INITCTLC);
-	writel(0x00000d71, dramcont + UMC_DRMMR0);
-	writel(0x00000006, dramcont + UMC_DRMMR1);
-	writel(0x00000298, dramcont + UMC_DRMMR2);
-	writel(0x00000000, dramcont + UMC_DRMMR3);
-	writel(0x003f0617, dramcont + UMC_SPCCTLA);
-	writel(0x00ff0008, dramcont + UMC_SPCCTLB);
-	writel(0x000c00ae, dramcont + UMC_RDATACTL_D0);
-	writel(0x000c00ae, dramcont + UMC_RDATACTL_D1);
-	writel(0x04060802, dramcont + UMC_WDATACTL_D0);
-	writel(0x04060802, dramcont + UMC_WDATACTL_D1);
-	writel(0x04a02000, dramcont + UMC_DATASET);
-	writel(0x00000000, ca_base + 0x2300);
-	writel(0x00400020, dramcont + UMC_DCCGCTL);
-	writel(0x0000000f, dramcont + 0x7000);
-	writel(0x0000000f, dramcont + 0x8000);
-	writel(0x000000c3, dramcont + 0x8004);
-	writel(0x00000071, dramcont + 0x8008);
-	writel(0x00000004, dramcont + UMC_FLOWCTLG);
-	writel(0x00000000, dramcont + 0x0060);
-	writel(0x80000201, ca_base + 0xc20);
-	writel(0x0801e01e, dramcont + UMC_FLOWCTLA);
-	writel(0x00200000, dramcont + UMC_FLOWCTLB);
-	writel(0x00004444, dramcont + UMC_FLOWCTLC);
-	writel(0x200a0a00, dramcont + UMC_SPCSETB);
-	writel(0x00010000, dramcont + UMC_SPCSETD);
-	writel(0x80000020, dramcont + UMC_DFICUPDCTLA);
-}
-
-static int umc_init_sub(int freq, int size_ch0, int size_ch1)
-{
-	void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE;
-	void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0);
-	void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1);
-	void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0);
-	void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1);
-	void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0);
-	void __iomem *phy0_1 = (void __iomem *)DDRPHY_BASE(0, 1);
-	void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0);
-	void __iomem *phy1_1 = (void __iomem *)DDRPHY_BASE(1, 1);
-
-	umc_dram_init_start(dramcont0);
-	umc_dram_init_start(dramcont1);
-	umc_dram_init_poll(dramcont0);
-	umc_dram_init_poll(dramcont1);
-
-	writel(0x00000101, dramcont0 + UMC_DIOCTLA);
-
-	ddrphy_init(phy0_0, freq, size_ch0);
-
-	ddrphy_prepare_training(phy0_0, 0);
-	ddrphy_training(phy0_0);
-
-	writel(0x00000103, dramcont0 + UMC_DIOCTLA);
-
-	ddrphy_init(phy0_1, freq, size_ch0);
-
-	ddrphy_prepare_training(phy0_1, 1);
-	ddrphy_training(phy0_1);
-
-	writel(0x00000101, dramcont1 + UMC_DIOCTLA);
-
-	ddrphy_init(phy1_0, freq, size_ch1);
-
-	ddrphy_prepare_training(phy1_0, 0);
-	ddrphy_training(phy1_0);
-
-	writel(0x00000103, dramcont1 + UMC_DIOCTLA);
-
-	ddrphy_init(phy1_1, freq, size_ch1);
-
-	ddrphy_prepare_training(phy1_1, 1);
-	ddrphy_training(phy1_1);
-
-	umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq);
-	umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq);
-
-	umc_start_ssif(ssif_base);
-
-	return 0;
-}
-
-int umc_init(void)
-{
-	return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000,
-					CONFIG_SDRAM1_SIZE / 0x08000000);
-}
-
-#if ((CONFIG_SDRAM0_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH0 == 2) || \
-     (CONFIG_SDRAM0_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH0 == 1)) && \
-    ((CONFIG_SDRAM1_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH1 == 2) || \
-     (CONFIG_SDRAM1_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH1 == 1))
-/* OK */
-#else
- #error Unsupported DDR configuration.
-#endif