summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-at91/Kconfig1
-rw-r--r--arch/arm/mach-at91/Makefile1
-rw-r--r--arch/arm/mach-at91/include/mach/atmel_mpddrc.h94
-rw-r--r--arch/arm/mach-at91/include/mach/sama5d2.h32
-rw-r--r--arch/arm/mach-at91/mpddrc.c107
5 files changed, 221 insertions, 14 deletions
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index c33364758b..9426302b38 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -74,6 +74,7 @@ config TARGET_AT91SAM9X5EK
config TARGET_SAMA5D2_XPLAINED
bool "SAMA5D2 Xplained board"
select CPU_V7
+ select SUPPORT_SPL
config TARGET_SAMA5D3_XPLAINED
bool "SAMA5D3 Xplained board"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 5b89617623..abd1d13da7 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_AT91SAM9G20) += sdram.o spl_at91.o
obj-$(CONFIG_AT91SAM9M10G45) += mpddrc.o spl_at91.o
obj-$(CONFIG_AT91SAM9N12) += mpddrc.o spl_at91.o
obj-$(CONFIG_AT91SAM9X5) += mpddrc.o spl_at91.o
+obj-$(CONFIG_SAMA5D2) += mpddrc.o spl_atmel.o matrix.o atmel_sfr.o
obj-$(CONFIG_SAMA5D3) += mpddrc.o spl_atmel.o
obj-$(CONFIG_SAMA5D4) += mpddrc.o spl_atmel.o matrix.o atmel_sfr.o
obj-y += spl.o
diff --git a/arch/arm/mach-at91/include/mach/atmel_mpddrc.h b/arch/arm/mach-at91/include/mach/atmel_mpddrc.h
index c6c8dda803..d37d9082cd 100644
--- a/arch/arm/mach-at91/include/mach/atmel_mpddrc.h
+++ b/arch/arm/mach-at91/include/mach/atmel_mpddrc.h
@@ -2,31 +2,69 @@
* Copyright (C) 2013 Atmel Corporation
* Bo Shen <voice.shen@atmel.com>
*
+ * Copyright (C) 2015 Atmel Corporation
+ * Wenyou Yang <wenyou.yang@atmel.com>
+ *
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __ATMEL_MPDDRC_H__
#define __ATMEL_MPDDRC_H__
-/*
- * Only define the needed register in mpddr
- * If other register needed, will add them later
- */
-struct atmel_mpddr {
+struct atmel_mpddrc_config {
u32 mr;
u32 rtr;
u32 cr;
u32 tpr0;
u32 tpr1;
u32 tpr2;
- u32 reserved[2];
u32 md;
};
+/*
+ * Only define the needed register in mpddr
+ * If other register needed, will add them later
+ */
+struct atmel_mpddr {
+ u32 mr; /* 0x00: Mode Register */
+ u32 rtr; /* 0x04: Refresh Timer Register */
+ u32 cr; /* 0x08: Configuration Register */
+ u32 tpr0; /* 0x0c: Timing Parameter 0 Register */
+ u32 tpr1; /* 0x10: Timing Parameter 1 Register */
+ u32 tpr2; /* 0x14: Timing Parameter 2 Register */
+ u32 reserved; /* 0x18: Reserved */
+ u32 lpr; /* 0x1c: Low-power Register */
+ u32 md; /* 0x20: Memory Device Register */
+ u32 reserved1; /* 0x24: Reserved */
+ u32 lpddr23_lpr; /* 0x28: LPDDR2-LPDDR3 Low-power Register*/
+ u32 cal_mr4; /* 0x2c: Calibration and MR4 Register */
+ u32 tim_cal; /* 0x30: Timing Calibration Register */
+ u32 io_calibr; /* 0x34: IO Calibration */
+ u32 ocms; /* 0x38: OCMS Register */
+ u32 ocms_key1; /* 0x3c: OCMS KEY1 Register */
+ u32 ocms_key2; /* 0x40: OCMS KEY2 Register */
+ u32 conf_arbiter; /* 0x44: Configuration Arbiter Register */
+ u32 timeout; /* 0x48: Timeout Port 0/1/2/3 Register */
+ u32 req_port0123; /* 0x4c: Request Port 0/1/2/3 Register */
+ u32 req_port4567; /* 0x50: Request Port 4/5/6/7 Register */
+ u32 bdw_port0123; /* 0x54: Bandwidth Port 0/1/2/3 Register */
+ u32 bdw_port4567; /* 0x58: Bandwidth Port 4/5/6/7 Register */
+ u32 rd_data_path; /* 0x5c: Read Datapath Register */
+ u32 reserved2[33];
+ u32 wpmr; /* 0xe4: Write Protection Mode Register */
+ u32 wpsr; /* 0xe8: Write Protection Status Register */
+ u32 reserved3[4];
+ u32 version; /* 0xfc: IP version */
+};
+
int ddr2_init(const unsigned int base,
const unsigned int ram_address,
- const struct atmel_mpddr *mpddr);
+ const struct atmel_mpddrc_config *mpddr_value);
+
+int ddr3_init(const unsigned int base,
+ const unsigned int ram_address,
+ const struct atmel_mpddrc_config *mpddr_value);
/* Bit field in mode register */
#define ATMEL_MPDDRC_MR_MODE_NORMAL_CMD 0x0
@@ -110,9 +148,51 @@ int ddr2_init(const unsigned int base,
/* Bit field in Memory Device Register */
#define ATMEL_MPDDRC_MD_LPDDR_SDRAM 0x3
+#define ATMEL_MPDDRC_MD_DDR3_SDRAM 0x4
+#define ATMEL_MPDDRC_MD_LPDDR3_SDRAM 0x5
#define ATMEL_MPDDRC_MD_DDR2_SDRAM 0x6
#define ATMEL_MPDDRC_MD_DBW_MASK (0x1 << 4)
#define ATMEL_MPDDRC_MD_DBW_32_BITS (0x0 << 4)
#define ATMEL_MPDDRC_MD_DBW_16_BITS (0x1 << 4)
+/* Bit field in I/O Calibration Register */
+#define ATMEL_MPDDRC_IO_CALIBR_RDIV 0x7
+
+#define ATMEL_MPDDRC_IO_CALIBR_LPDDR2_RZQ_34_3 0x1
+#define ATMEL_MPDDRC_IO_CALIBR_LPDDR2_RZQ_40 0x2
+#define ATMEL_MPDDRC_IO_CALIBR_LPDDR2_RZQ_48 0x3
+#define ATMEL_MPDDRC_IO_CALIBR_LPDDR2_RZQ_60 0x4
+#define ATMEL_MPDDRC_IO_CALIBR_LPDDR2_RZQ_80 0x6
+#define ATMEL_MPDDRC_IO_CALIBR_LPDDR2_RZQ_120 0x7
+
+#define ATMEL_MPDDRC_IO_CALIBR_DDR2_RZQ_35 0x2
+#define ATMEL_MPDDRC_IO_CALIBR_DDR2_RZQ_43 0x3
+#define ATMEL_MPDDRC_IO_CALIBR_DDR2_RZQ_52 0x4
+#define ATMEL_MPDDRC_IO_CALIBR_DDR2_RZQ_70 0x6
+#define ATMEL_MPDDRC_IO_CALIBR_DDR2_RZQ_105 0x7
+
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_37 0x2
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_44 0x3
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_55 0x4
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_73 0x6
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_110 0x7
+
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_37 0x2
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_44 0x3
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_55 0x4
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_73 0x6
+#define ATMEL_MPDDRC_IO_CALIBR_DDR3_RZQ_110 0x7
+
+#define ATMEL_MPDDRC_IO_CALIBR_TZQIO 0x7f
+#define ATMEL_MPDDRC_IO_CALIBR_TZQIO_(x) (((x) & 0x7f) << 8)
+
+#define ATMEL_MPDDRC_IO_CALIBR_EN_CALIB (0x1 << 4)
+
+/* Bit field in Read Data Path Register */
+#define ATMEL_MPDDRC_RD_DATA_PATH_SHIFT_SAMPLING 0x3
+#define ATMEL_MPDDRC_RD_DATA_PATH_NO_SHIFT 0x0
+#define ATMEL_MPDDRC_RD_DATA_PATH_SHIFT_ONE_CYCLE 0x1
+#define ATMEL_MPDDRC_RD_DATA_PATH_SHIFT_TWO_CYCLE 0x2
+#define ATMEL_MPDDRC_RD_DATA_PATH_SHIFT_THREE_CYCLE 0x3
+
#endif
diff --git a/arch/arm/mach-at91/include/mach/sama5d2.h b/arch/arm/mach-at91/include/mach/sama5d2.h
index c85571c999..dd5a2a7523 100644
--- a/arch/arm/mach-at91/include/mach/sama5d2.h
+++ b/arch/arm/mach-at91/include/mach/sama5d2.h
@@ -106,6 +106,7 @@
#define ATMEL_BASE_MPDDRC 0xf000c000
#define ATMEL_BASE_XDMAC0 0xf0010000
#define ATMEL_BASE_PMC 0xf0014000
+#define ATMEL_BASE_MATRIX0 0xf0018000
#define ATMEL_BASE_QSPI0 0xf0020000
#define ATMEL_BASE_QSPI1 0xf0024000
#define ATMEL_BASE_SPI0 0xf8000000
@@ -117,6 +118,7 @@
#define ATMEL_BASE_UART1 0xf8020000
#define ATMEL_BASE_UART2 0xf8024000
#define ATMEL_BASE_TWI0 0xf8028000
+#define ATMEL_BASE_SFR 0xf8030000
#define ATMEL_BASE_SYSC 0xf8048000
#define ATMEL_BASE_SPI1 0xfc000000
#define ATMEL_BASE_UART3 0xfc008000
@@ -125,6 +127,7 @@
#define ATMEL_BASE_UDPHS 0xfc02c000
#define ATMEL_BASE_PIOA 0xfc038000
+#define ATMEL_BASE_MATRIX1 0xfc03c000
#define ATMEL_CHIPID_CIDR 0xfc069000
#define ATMEL_CHIPID_EXID 0xfc069004
@@ -171,6 +174,35 @@
#define CPU_HAS_PCR
#define CPU_HAS_H32MXDIV
+/* AICREDIR Unlock Key */
+#define ATMEL_SFR_AICREDIR_KEY 0xB6D81C4D
+
+/* MATRIX0(H64MX) slave id definitions */
+#define H64MX_SLAVE_AXIMX_BRIDGE 0 /* Bridge from H64MX to AXIMX */
+#define H64MX_SLAVE_PERIPH_BRIDGE 1 /* H64MX Peripheral Bridge */
+#define H64MX_SLAVE_DDRC_PORT0 2 /* DDR2 Port0-AESOTF */
+#define H64MX_SLAVE_DDRC_PORT1 3 /* DDR2 Port1 */
+#define H64MX_SLAVE_DDRC_PORT2 4 /* DDR2 Port2 */
+#define H64MX_SLAVE_DDRC_PORT3 5 /* DDR2 Port3 */
+#define H64MX_SLAVE_DDRC_PORT4 6 /* DDR2 Port4 */
+#define H64MX_SLAVE_DDRC_PORT5 7 /* DDR2 Port5 */
+#define H64MX_SLAVE_DDRC_PORT6 8 /* DDR2 Port6 */
+#define H64MX_SLAVE_DDRC_PORT7 9 /* DDR2 Port7 */
+#define H64MX_SLAVE_SRAM 10 /* Internal SRAM 128K */
+#define H64MX_SLAVE_CACHE_L2 11 /* Internal SRAM 128K(L2) */
+#define H64MX_SLAVE_QSPI0 12 /* QSPI0 */
+#define H64MX_SLAVE_QSPI1 13 /* QSPI1 */
+#define H64MX_SLAVE_AESB 14 /* AESB */
+
+/* MATRIX1(H32MX) slave id definitions */
+#define H32MX_SLAVE_H64MX_BRIDGE 0 /* Bridge from H32MX to H64MX */
+#define H32MX_SLAVE_PERIPH_BRIDGE0 1 /* H32MX Peripheral Bridge 0 */
+#define H32MX_SLAVE_PERIPH_BRIDGE1 2 /* H32MX Peripheral Bridge 1 */
+#define H32MX_SLAVE_EBI 3 /* External Bus Interface */
+#define H32MX_SLAVE_NFC_CMD 3 /* NFC command Register */
+#define H32MX_SLAVE_NFC_SRAM 4 /* NFC SRAM */
+#define H32MX_SLAVE_USB 5 /* USB Device & Host */
+
/* SAMA5D2 series chip id definitions */
#define ARCH_ID_SAMA5D2 0x8a5c08c0
#define ARCH_EXID_SAMA5D21CU 0x0000005a
diff --git a/arch/arm/mach-at91/mpddrc.c b/arch/arm/mach-at91/mpddrc.c
index 47e6e5a3cd..16e089c3a0 100644
--- a/arch/arm/mach-at91/mpddrc.c
+++ b/arch/arm/mach-at91/mpddrc.c
@@ -2,6 +2,9 @@
* Copyright (C) 2013 Atmel Corporation
* Bo Shen <voice.shen@atmel.com>
*
+ * Copyright (C) 2015 Atmel Corporation
+ * Wenyou Yang <wenyou.yang@atmel.com>
+ *
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -9,6 +12,8 @@
#include <asm/io.h>
#include <asm/arch/atmel_mpddrc.h>
+#define SAMA5D3_MPDDRC_VERSION 0x140
+
static inline void atmel_mpddr_op(const struct atmel_mpddr *mpddr,
int mode,
u32 ram_address)
@@ -17,20 +22,22 @@ static inline void atmel_mpddr_op(const struct atmel_mpddr *mpddr,
writel(0, ram_address);
}
-static int ddr2_decodtype_is_seq(u32 cr)
+static int ddr2_decodtype_is_seq(const unsigned int base, u32 cr)
{
-#if defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4) || \
- defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9N12)
- if (cr & ATMEL_MPDDRC_CR_DECOD_INTERLEAVED)
+ struct atmel_mpddr *mpddr = (struct atmel_mpddr *)base;
+ u16 version = readl(&mpddr->version) & 0xffff;
+
+ if ((version >= SAMA5D3_MPDDRC_VERSION) &&
+ (cr & ATMEL_MPDDRC_CR_DECOD_INTERLEAVED))
return 0;
-#endif
+
return 1;
}
int ddr2_init(const unsigned int base,
const unsigned int ram_address,
- const struct atmel_mpddr *mpddr_value)
+ const struct atmel_mpddrc_config *mpddr_value)
{
const struct atmel_mpddr *mpddr = (struct atmel_mpddr *)base;
@@ -38,7 +45,7 @@ int ddr2_init(const unsigned int base,
/* Compute bank offset according to NC in configuration register */
ba_off = (mpddr_value->cr & ATMEL_MPDDRC_CR_NC_MASK) + 9;
- if (ddr2_decodtype_is_seq(mpddr_value->cr))
+ if (ddr2_decodtype_is_seq(base, mpddr_value->cr))
ba_off += ((mpddr_value->cr & ATMEL_MPDDRC_CR_NR_MASK) >> 2) + 11;
ba_off += (mpddr_value->md & ATMEL_MPDDRC_MD_DBW_MASK) ? 1 : 2;
@@ -135,3 +142,89 @@ int ddr2_init(const unsigned int base,
return 0;
}
+
+int ddr3_init(const unsigned int base,
+ const unsigned int ram_address,
+ const struct atmel_mpddrc_config *mpddr_value)
+{
+ struct atmel_mpddr *mpddr = (struct atmel_mpddr *)base;
+ u32 ba_off;
+
+ /* Compute bank offset according to NC in configuration register */
+ ba_off = (mpddr_value->cr & ATMEL_MPDDRC_CR_NC_MASK) + 9;
+ if (ddr2_decodtype_is_seq(base, mpddr_value->cr))
+ ba_off += ((mpddr_value->cr &
+ ATMEL_MPDDRC_CR_NR_MASK) >> 2) + 11;
+
+ ba_off += (mpddr_value->md & ATMEL_MPDDRC_MD_DBW_MASK) ? 1 : 2;
+
+ /* Program the memory device type */
+ writel(mpddr_value->md, &mpddr->md);
+
+ /*
+ * Program features of the DDR3-SDRAM device and timing parameters
+ */
+ writel(mpddr_value->cr, &mpddr->cr);
+
+ writel(mpddr_value->tpr0, &mpddr->tpr0);
+ writel(mpddr_value->tpr1, &mpddr->tpr1);
+ writel(mpddr_value->tpr2, &mpddr->tpr2);
+
+ /* A NOP command is issued to the DDR3-SRAM */
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
+
+ /* A pause of at least 500us must be observed before a single toggle. */
+ udelay(500);
+
+ /* A NOP command is issued to the DDR3-SDRAM */
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NOP_CMD, ram_address);
+
+ /*
+ * An Extended Mode Register Set (EMRS2) cycle is issued to choose
+ * between commercial or high temperature operations.
+ */
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+ ram_address + (0x2 << ba_off));
+ /*
+ * Step 7: An Extended Mode Register Set (EMRS3) cycle is issued to set
+ * the Extended Mode Register to 0.
+ */
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+ ram_address + (0x3 << ba_off));
+ /*
+ * An Extended Mode Register Set (EMRS1) cycle is issued to disable and
+ * to program O.D.S. (Output Driver Strength).
+ */
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD,
+ ram_address + (0x1 << ba_off));
+
+ /*
+ * Write a one to the DLL bit (enable DLL reset) in the MPDDRC
+ * Configuration Register.
+ */
+
+ /* A Mode Register Set (MRS) cycle is issued to reset DLL. */
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_LMR_CMD, ram_address);
+
+ udelay(50);
+
+ /*
+ * A Calibration command (MRS) is issued to calibrate RTT and RON
+ * values for the Process Voltage Temperature (PVT).
+ */
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_DEEP_CMD, ram_address);
+
+ /* A Normal Mode command is provided. */
+ atmel_mpddr_op(mpddr, ATMEL_MPDDRC_MR_MODE_NORMAL_CMD, ram_address);
+
+ /* Perform a write access to any DDR3-SDRAM address. */
+ writel(0, ram_address);
+
+ /*
+ * Write the refresh rate into the COUNT field in the MPDDRC
+ * Refresh Timer Register (MPDDRC_RTR):
+ */
+ writel(mpddr_value->rtr, &mpddr->rtr);
+
+ return 0;
+}
generated by cgit (git 2.34.1) at 2024-12-26 23:46:27 +0000