diff options
Diffstat (limited to 'arch/mips/include')
26 files changed, 8438 insertions, 0 deletions
diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h new file mode 100644 index 0000000000..3a1e6d615f --- /dev/null +++ b/arch/mips/include/asm/addrspace.h @@ -0,0 +1,165 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 99 Ralf Baechle + * Copyright (C) 2000, 2002 Maciej W. Rozycki + * Copyright (C) 1990, 1999 by Silicon Graphics, Inc. + */ +#ifndef _ASM_ADDRSPACE_H +#define _ASM_ADDRSPACE_H + +/* + * Configure language + */ +#ifdef __ASSEMBLY__ +#define _ATYPE_ +#define _ATYPE32_ +#define _ATYPE64_ +#define _CONST64_(x) x +#else +#define _ATYPE_ __PTRDIFF_TYPE__ +#define _ATYPE32_ int +#define _ATYPE64_ __s64 +#ifdef CONFIG_64BIT +#define _CONST64_(x) x ## L +#else +#define _CONST64_(x) x ## LL +#endif +#endif + +/* + * 32-bit MIPS address spaces + */ +#ifdef __ASSEMBLY__ +#define _ACAST32_ +#define _ACAST64_ +#else +#define _ACAST32_ (_ATYPE_)(_ATYPE32_) /* widen if necessary */ +#define _ACAST64_ (_ATYPE64_) /* do _not_ narrow */ +#endif + +/* + * Returns the kernel segment base of a given address + */ +#define KSEGX(a) ((_ACAST32_ (a)) & 0xe0000000) + +/* + * Returns the physical address of a CKSEGx / XKPHYS address + */ +#define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff) +#define XPHYSADDR(a) ((_ACAST64_(a)) & \ + _CONST64_(0x000000ffffffffff)) + +#ifdef CONFIG_64BIT + +/* + * Memory segments (64bit kernel mode addresses) + * The compatibility segments use the full 64-bit sign extended value. Note + * the R8000 doesn't have them so don't reference these in generic MIPS code. + */ +#define XKUSEG _CONST64_(0x0000000000000000) +#define XKSSEG _CONST64_(0x4000000000000000) +#define XKPHYS _CONST64_(0x8000000000000000) +#define XKSEG _CONST64_(0xc000000000000000) +#define CKSEG0 _CONST64_(0xffffffff80000000) +#define CKSEG1 _CONST64_(0xffffffffa0000000) +#define CKSSEG _CONST64_(0xffffffffc0000000) +#define CKSEG3 _CONST64_(0xffffffffe0000000) + +#define CKSEG0ADDR(a) (CPHYSADDR(a) | CKSEG0) +#define CKSEG1ADDR(a) (CPHYSADDR(a) | CKSEG1) +#define CKSEG2ADDR(a) (CPHYSADDR(a) | CKSEG2) +#define CKSEG3ADDR(a) (CPHYSADDR(a) | CKSEG3) + +#else + +#define CKSEG0ADDR(a) (CPHYSADDR(a) | KSEG0) +#define CKSEG1ADDR(a) (CPHYSADDR(a) | KSEG1) +#define CKSEG2ADDR(a) (CPHYSADDR(a) | KSEG2) +#define CKSEG3ADDR(a) (CPHYSADDR(a) | KSEG3) + +/* + * Map an address to a certain kernel segment + */ +#define KSEG0ADDR(a) (CPHYSADDR(a) | KSEG0) +#define KSEG1ADDR(a) (CPHYSADDR(a) | KSEG1) +#define KSEG2ADDR(a) (CPHYSADDR(a) | KSEG2) +#define KSEG3ADDR(a) (CPHYSADDR(a) | KSEG3) + +/* + * Memory segments (32bit kernel mode addresses) + * These are the traditional names used in the 32-bit universe. + */ +#define KUSEG 0x00000000 +#define KSEG0 0x80000000 +#define KSEG1 0xa0000000 +#define KSEG2 0xc0000000 +#define KSEG3 0xe0000000 + +#define CKUSEG 0x00000000 +#define CKSEG0 0x80000000 +#define CKSEG1 0xa0000000 +#define CKSEG2 0xc0000000 +#define CKSEG3 0xe0000000 + +#endif + +/* + * Cache modes for XKPHYS address conversion macros + */ +#define K_CALG_COH_EXCL1_NOL2 0 +#define K_CALG_COH_SHRL1_NOL2 1 +#define K_CALG_UNCACHED 2 +#define K_CALG_NONCOHERENT 3 +#define K_CALG_COH_EXCL 4 +#define K_CALG_COH_SHAREABLE 5 +#define K_CALG_NOTUSED 6 +#define K_CALG_UNCACHED_ACCEL 7 + +/* + * 64-bit address conversions + */ +#define PHYS_TO_XKSEG_UNCACHED(p) PHYS_TO_XKPHYS(K_CALG_UNCACHED, (p)) +#define PHYS_TO_XKSEG_CACHED(p) PHYS_TO_XKPHYS(K_CALG_COH_SHAREABLE, (p)) +#define XKPHYS_TO_PHYS(p) ((p) & TO_PHYS_MASK) +#define PHYS_TO_XKPHYS(cm, a) (_CONST64_(0x8000000000000000) | \ + (_CONST64_(cm) << 59) | (a)) + +/* + * Returns the uncached address of a sdram address + */ +#ifndef __ASSEMBLY__ +#if defined(CONFIG_SOC_AU1X00) || defined(CONFIG_TB0229) +/* We use a 36 bit physical address map here and + cannot access physical memory directly from core */ +#define UNCACHED_SDRAM(a) (((unsigned long)(a)) | 0x20000000) +#else /* !CONFIG_SOC_AU1X00 */ +#define UNCACHED_SDRAM(a) KSEG1ADDR(a) +#endif /* CONFIG_SOC_AU1X00 */ +#endif /* __ASSEMBLY__ */ + +/* + * The ultimate limited of the 64-bit MIPS architecture: 2 bits for selecting + * the region, 3 bits for the CCA mode. This leaves 59 bits of which the + * R8000 implements most with its 48-bit physical address space. + */ +#define TO_PHYS_MASK _CONST64_(0x07ffffffffffffff) /* 2^^59 - 1 */ + +#ifndef CONFIG_CPU_R8000 + +/* + * The R8000 doesn't have the 32-bit compat spaces so we don't define them + * in order to catch bugs in the source code. + */ + +#define COMPAT_K1BASE32 _CONST64_(0xffffffffa0000000) +#define PHYS_TO_COMPATK1(x) ((x) | COMPAT_K1BASE32) /* 32-bit compat k1 */ + +#endif + +#define KDM_TO_PHYS(x) (_ACAST64_ (x) & TO_PHYS_MASK) +#define PHYS_TO_K0(x) (_ACAST64_ (x) | CAC_BASE) + +#endif /* _ASM_ADDRSPACE_H */ diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h new file mode 100644 index 0000000000..608cfcfbb3 --- /dev/null +++ b/arch/mips/include/asm/asm.h @@ -0,0 +1,409 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle + * Copyright (C) 1999 by Silicon Graphics, Inc. + * Copyright (C) 2001 MIPS Technologies, Inc. + * Copyright (C) 2002 Maciej W. Rozycki + * + * Some useful macros for MIPS assembler code + * + * Some of the routines below contain useless nops that will be optimized + * away by gas in -O mode. These nops are however required to fill delay + * slots in noreorder mode. + */ +#ifndef __ASM_ASM_H +#define __ASM_ASM_H + +#include <asm/sgidefs.h> + +#ifndef CAT +#ifdef __STDC__ +#define __CAT(str1, str2) str1##str2 +#else +#define __CAT(str1, str2) str1/**/str2 +#endif +#define CAT(str1, str2) __CAT(str1, str2) +#endif + +/* + * PIC specific declarations + * Not used for the kernel but here seems to be the right place. + */ +#ifdef __PIC__ +#define CPRESTORE(register) \ + .cprestore register +#define CPADD(register) \ + .cpadd register +#define CPLOAD(register) \ + .cpload register +#else +#define CPRESTORE(register) +#define CPADD(register) +#define CPLOAD(register) +#endif + +/* + * LEAF - declare leaf routine + */ +#define LEAF(symbol) \ + .globl symbol; \ + .align 2; \ + .type symbol, @function; \ + .ent symbol, 0; \ +symbol: .frame sp, 0, ra + +/* + * NESTED - declare nested routine entry point + */ +#define NESTED(symbol, framesize, rpc) \ + .globl symbol; \ + .align 2; \ + .type symbol, @function; \ + .ent symbol, 0; \ +symbol: .frame sp, framesize, rpc + +/* + * END - mark end of function + */ +#define END(function) \ + .end function; \ + .size function, .-function + +/* + * EXPORT - export definition of symbol + */ +#define EXPORT(symbol) \ + .globl symbol; \ +symbol: + +/* + * FEXPORT - export definition of a function symbol + */ +#define FEXPORT(symbol) \ + .globl symbol; \ + .type symbol, @function; \ +symbol: + +/* + * ABS - export absolute symbol + */ +#define ABS(symbol,value) \ + .globl symbol; \ +symbol = value + +#define PANIC(msg) \ + .set push; \ + .set reorder; \ + PTR_LA a0, 8f; \ + jal panic; \ +9: b 9b; \ + .set pop; \ + TEXT(msg) + +/* + * Print formatted string + */ +#ifdef CONFIG_PRINTK +#define PRINT(string) \ + .set push; \ + .set reorder; \ + PTR_LA a0, 8f; \ + jal printk; \ + .set pop; \ + TEXT(string) +#else +#define PRINT(string) +#endif + +#define TEXT(msg) \ + .pushsection .data; \ +8: .asciiz msg; \ + .popsection; + +/* + * Build text tables + */ +#define TTABLE(string) \ + .pushsection .text; \ + .word 1f; \ + .popsection \ + .pushsection .data; \ +1: .asciiz string; \ + .popsection + +/* + * MIPS IV pref instruction. + * Use with .set noreorder only! + * + * MIPS IV implementations are free to treat this as a nop. The R5000 + * is one of them. So we should have an option not to use this instruction. + */ +#ifdef CONFIG_CPU_HAS_PREFETCH + +#define PREF(hint,addr) \ + .set push; \ + .set mips4; \ + pref hint, addr; \ + .set pop + +#define PREFX(hint,addr) \ + .set push; \ + .set mips4; \ + prefx hint, addr; \ + .set pop + +#else /* !CONFIG_CPU_HAS_PREFETCH */ + +#define PREF(hint, addr) +#define PREFX(hint, addr) + +#endif /* !CONFIG_CPU_HAS_PREFETCH */ + +/* + * MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs. + */ +#if (_MIPS_ISA == _MIPS_ISA_MIPS1) +#define MOVN(rd, rs, rt) \ + .set push; \ + .set reorder; \ + beqz rt, 9f; \ + move rd, rs; \ + .set pop; \ +9: +#define MOVZ(rd, rs, rt) \ + .set push; \ + .set reorder; \ + bnez rt, 9f; \ + move rd, rs; \ + .set pop; \ +9: +#endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */ +#if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) +#define MOVN(rd, rs, rt) \ + .set push; \ + .set noreorder; \ + bnezl rt, 9f; \ + move rd, rs; \ + .set pop; \ +9: +#define MOVZ(rd, rs, rt) \ + .set push; \ + .set noreorder; \ + beqzl rt, 9f; \ + move rd, rs; \ + .set pop; \ +9: +#endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */ +#if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \ + (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64) +#define MOVN(rd, rs, rt) \ + movn rd, rs, rt +#define MOVZ(rd, rs, rt) \ + movz rd, rs, rt +#endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */ + +/* + * Stack alignment + */ +#if (_MIPS_SIM == _MIPS_SIM_ABI32) +#define ALSZ 7 +#define ALMASK ~7 +#endif +#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) +#define ALSZ 15 +#define ALMASK ~15 +#endif + +/* + * Macros to handle different pointer/register sizes for 32/64-bit code + */ + +/* + * Size of a register + */ +#ifdef __mips64 +#define SZREG 8 +#else +#define SZREG 4 +#endif + +/* + * Use the following macros in assemblercode to load/store registers, + * pointers etc. + */ +#if (_MIPS_SIM == _MIPS_SIM_ABI32) +#define REG_S sw +#define REG_L lw +#define REG_SUBU subu +#define REG_ADDU addu +#endif +#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) +#define REG_S sd +#define REG_L ld +#define REG_SUBU dsubu +#define REG_ADDU daddu +#endif + +/* + * How to add/sub/load/store/shift C int variables. + */ +#if (_MIPS_SZINT == 32) +#define INT_ADD add +#define INT_ADDU addu +#define INT_ADDI addi +#define INT_ADDIU addiu +#define INT_SUB sub +#define INT_SUBU subu +#define INT_L lw +#define INT_S sw +#define INT_SLL sll +#define INT_SLLV sllv +#define INT_SRL srl +#define INT_SRLV srlv +#define INT_SRA sra +#define INT_SRAV srav +#endif + +#if (_MIPS_SZINT == 64) +#define INT_ADD dadd +#define INT_ADDU daddu +#define INT_ADDI daddi +#define INT_ADDIU daddiu +#define INT_SUB dsub +#define INT_SUBU dsubu +#define INT_L ld +#define INT_S sd +#define INT_SLL dsll +#define INT_SLLV dsllv +#define INT_SRL dsrl +#define INT_SRLV dsrlv +#define INT_SRA dsra +#define INT_SRAV dsrav +#endif + +/* + * How to add/sub/load/store/shift C long variables. + */ +#if (_MIPS_SZLONG == 32) +#define LONG_ADD add +#define LONG_ADDU addu +#define LONG_ADDI addi +#define LONG_ADDIU addiu +#define LONG_SUB sub +#define LONG_SUBU subu +#define LONG_L lw +#define LONG_S sw +#define LONG_SLL sll +#define LONG_SLLV sllv +#define LONG_SRL srl +#define LONG_SRLV srlv +#define LONG_SRA sra +#define LONG_SRAV srav + +#define LONG .word +#define LONGSIZE 4 +#define LONGMASK 3 +#define LONGLOG 2 +#endif + +#if (_MIPS_SZLONG == 64) +#define LONG_ADD dadd +#define LONG_ADDU daddu +#define LONG_ADDI daddi +#define LONG_ADDIU daddiu +#define LONG_SUB dsub +#define LONG_SUBU dsubu +#define LONG_L ld +#define LONG_S sd +#define LONG_SLL dsll +#define LONG_SLLV dsllv +#define LONG_SRL dsrl +#define LONG_SRLV dsrlv +#define LONG_SRA dsra +#define LONG_SRAV dsrav + +#define LONG .dword +#define LONGSIZE 8 +#define LONGMASK 7 +#define LONGLOG 3 +#endif + +/* + * How to add/sub/load/store/shift pointers. + */ +#if (_MIPS_SZPTR == 32) +#define PTR_ADD add +#define PTR_ADDU addu +#define PTR_ADDI addi +#define PTR_ADDIU addiu +#define PTR_SUB sub +#define PTR_SUBU subu +#define PTR_L lw +#define PTR_S sw +#define PTR_LA la +#define PTR_LI li +#define PTR_SLL sll +#define PTR_SLLV sllv +#define PTR_SRL srl +#define PTR_SRLV srlv +#define PTR_SRA sra +#define PTR_SRAV srav + +#define PTR_SCALESHIFT 2 + +#define PTR .word +#define PTRSIZE 4 +#define PTRLOG 2 +#endif + +#if (_MIPS_SZPTR == 64) +#define PTR_ADD dadd +#define PTR_ADDU daddu +#define PTR_ADDI daddi +#define PTR_ADDIU daddiu +#define PTR_SUB dsub +#define PTR_SUBU dsubu +#define PTR_L ld +#define PTR_S sd +#define PTR_LA dla +#define PTR_LI dli +#define PTR_SLL dsll +#define PTR_SLLV dsllv +#define PTR_SRL dsrl +#define PTR_SRLV dsrlv +#define PTR_SRA dsra +#define PTR_SRAV dsrav + +#define PTR_SCALESHIFT 3 + +#define PTR .dword +#define PTRSIZE 8 +#define PTRLOG 3 +#endif + +/* + * Some cp0 registers were extended to 64bit for MIPS III. + */ +#if (_MIPS_SIM == _MIPS_SIM_ABI32) +#define MFC0 mfc0 +#define MTC0 mtc0 +#endif +#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) +#define MFC0 dmfc0 +#define MTC0 dmtc0 +#endif + +#define SSNOP sll zero, zero, 1 + +#ifdef CONFIG_SGI_IP28 +/* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */ +#include <asm/cacheops.h> +#define R10KCBARRIER(addr) cache Cache_Barrier, addr; +#else +#define R10KCBARRIER(addr) +#endif + +#endif /* __ASM_ASM_H */ diff --git a/arch/mips/include/asm/au1x00.h b/arch/mips/include/asm/au1x00.h new file mode 100644 index 0000000000..2a948e8fe7 --- /dev/null +++ b/arch/mips/include/asm/au1x00.h @@ -0,0 +1,1090 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Include file for Alchemy Semiconductor's Au1k CPU. + * + * Copyright 2000,2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or source@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + /* + * some definitions add by takuzo@sm.sony.co.jp and sato@sm.sony.co.jp + */ + +#ifndef _AU1X00_H_ +#define _AU1X00_H_ + +#ifndef __ASSEMBLY__ +/* cpu pipeline flush */ +void static inline au_sync(void) +{ + __asm__ volatile ("sync"); +} + +void static inline au_sync_udelay(int us) +{ + __asm__ volatile ("sync"); + udelay(us); +} + +void static inline au_writeb(u8 val, int reg) +{ + *(volatile u8 *)(reg) = val; +} + +void static inline au_writew(u16 val, int reg) +{ + *(volatile u16 *)(reg) = val; +} + +void static inline au_writel(u32 val, int reg) +{ + *(volatile u32 *)(reg) = val; +} + +static inline u8 au_readb(unsigned long port) +{ + return (*(volatile u8 *)port); +} + +static inline u16 au_readw(unsigned long port) +{ + return (*(volatile u16 *)port); +} + +static inline u32 au_readl(unsigned long port) +{ + return (*(volatile u32 *)port); +} + +/* These next three functions should be a generic part of the MIPS + * kernel (with the 'au_' removed from the name) and selected for + * processors that support the instructions. + * Taken from PPC tree. -- Dan + */ +/* Return the bit position of the most significant 1 bit in a word */ +static __inline__ int __ilog2(unsigned int x) +{ + int lz; + + asm volatile ( + ".set\tnoreorder\n\t" + ".set\tnoat\n\t" + ".set\tmips32\n\t" + "clz\t%0,%1\n\t" + ".set\tmips0\n\t" + ".set\tat\n\t" + ".set\treorder" + : "=r" (lz) + : "r" (x)); + + return 31 - lz; +} + +static __inline__ int au_ffz(unsigned int x) +{ + if ((x = ~x) == 0) + return 32; + return __ilog2(x & -x); +} + +/* + * ffs: find first bit set. This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ +static __inline__ int au_ffs(int x) +{ + return __ilog2(x & -x) + 1; +} + +#define gpio_set(Value) outl(Value, SYS_OUTPUTSET) +#define gpio_clear(Value) outl(Value, SYS_OUTPUTCLR) +#define gpio_read() inl(SYS_PINSTATERD) +#define gpio_tristate(Value) outl(Value, SYS_TRIOUTCLR) + +#endif /* !ASSEMBLY */ + +#ifdef CONFIG_PM +/* no CP0 timer irq */ +#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) +#else +#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) +#endif + +#define CP0_IWATCHLO $18,1 +#define CP0_DEBUG $23 + +/* SDRAM Controller */ +#ifdef CONFIG_SOC_AU1550 + +#define MEM_SDMODE0 0xB4000800 +#define MEM_SDMODE1 0xB4000808 +#define MEM_SDMODE2 0xB4000810 + +#define MEM_SDADDR0 0xB4000820 +#define MEM_SDADDR1 0xB4000828 +#define MEM_SDADDR2 0xB4000830 + +#define MEM_SDCONFIGA 0xB4000840 +#define MEM_SDCONFIGB 0xB4000848 +#define MEM_SDPRECMD 0xB40008c0 +#define MEM_SDAUTOREF 0xB40008c8 + +#define MEM_SDWRMD0 0xB4000880 +#define MEM_SDWRMD1 0xB4000888 +#define MEM_SDWRMD2 0xB4000890 + +#else /* CONFIG_SOC_AU1550 */ + +#define MEM_SDMODE0 0xB4000000 +#define MEM_SDMODE1 0xB4000004 +#define MEM_SDMODE2 0xB4000008 + +#define MEM_SDADDR0 0xB400000C +#define MEM_SDADDR1 0xB4000010 +#define MEM_SDADDR2 0xB4000014 + +#define MEM_SDREFCFG 0xB4000018 +#define MEM_SDPRECMD 0xB400001C +#define MEM_SDAUTOREF 0xB4000020 + +#define MEM_SDWRMD0 0xB4000024 +#define MEM_SDWRMD1 0xB4000028 +#define MEM_SDWRMD2 0xB400002C + +#endif /* CONFIG_SOC_AU1550 */ + +#define MEM_SDSLEEP 0xB4000030 +#define MEM_SDSMCKE 0xB4000034 + +/* Static Bus Controller */ +#define MEM_STCFG0 0xB4001000 +#define MEM_STTIME0 0xB4001004 +#define MEM_STADDR0 0xB4001008 + +#define MEM_STCFG1 0xB4001010 +#define MEM_STTIME1 0xB4001014 +#define MEM_STADDR1 0xB4001018 + +#define MEM_STCFG2 0xB4001020 +#define MEM_STTIME2 0xB4001024 +#define MEM_STADDR2 0xB4001028 + +#define MEM_STCFG3 0xB4001030 +#define MEM_STTIME3 0xB4001034 +#define MEM_STADDR3 0xB4001038 + +/* Interrupt Controller 0 */ +#define IC0_CFG0RD 0xB0400040 +#define IC0_CFG0SET 0xB0400040 +#define IC0_CFG0CLR 0xB0400044 + +#define IC0_CFG1RD 0xB0400048 +#define IC0_CFG1SET 0xB0400048 +#define IC0_CFG1CLR 0xB040004C + +#define IC0_CFG2RD 0xB0400050 +#define IC0_CFG2SET 0xB0400050 +#define IC0_CFG2CLR 0xB0400054 + +#define IC0_REQ0INT 0xB0400054 +#define IC0_SRCRD 0xB0400058 +#define IC0_SRCSET 0xB0400058 +#define IC0_SRCCLR 0xB040005C +#define IC0_REQ1INT 0xB040005C + +#define IC0_ASSIGNRD 0xB0400060 +#define IC0_ASSIGNSET 0xB0400060 +#define IC0_ASSIGNCLR 0xB0400064 + +#define IC0_WAKERD 0xB0400068 +#define IC0_WAKESET 0xB0400068 +#define IC0_WAKECLR 0xB040006C + +#define IC0_MASKRD 0xB0400070 +#define IC0_MASKSET 0xB0400070 +#define IC0_MASKCLR 0xB0400074 + +#define IC0_RISINGRD 0xB0400078 +#define IC0_RISINGCLR 0xB0400078 +#define IC0_FALLINGRD 0xB040007C +#define IC0_FALLINGCLR 0xB040007C + +#define IC0_TESTBIT 0xB0400080 + +/* Interrupt Controller 1 */ +#define IC1_CFG0RD 0xB1800040 +#define IC1_CFG0SET 0xB1800040 +#define IC1_CFG0CLR 0xB1800044 + +#define IC1_CFG1RD 0xB1800048 +#define IC1_CFG1SET 0xB1800048 +#define IC1_CFG1CLR 0xB180004C + +#define IC1_CFG2RD 0xB1800050 +#define IC1_CFG2SET 0xB1800050 +#define IC1_CFG2CLR 0xB1800054 + +#define IC1_REQ0INT 0xB1800054 +#define IC1_SRCRD 0xB1800058 +#define IC1_SRCSET 0xB1800058 +#define IC1_SRCCLR 0xB180005C +#define IC1_REQ1INT 0xB180005C + +#define IC1_ASSIGNRD 0xB1800060 +#define IC1_ASSIGNSET 0xB1800060 +#define IC1_ASSIGNCLR 0xB1800064 + +#define IC1_WAKERD 0xB1800068 +#define IC1_WAKESET 0xB1800068 +#define IC1_WAKECLR 0xB180006C + +#define IC1_MASKRD 0xB1800070 +#define IC1_MASKSET 0xB1800070 +#define IC1_MASKCLR 0xB1800074 + +#define IC1_RISINGRD 0xB1800078 +#define IC1_RISINGCLR 0xB1800078 +#define IC1_FALLINGRD 0xB180007C +#define IC1_FALLINGCLR 0xB180007C + +#define IC1_TESTBIT 0xB1800080 + +/* Interrupt Configuration Modes */ +#define INTC_INT_DISABLED 0 +#define INTC_INT_RISE_EDGE 0x1 +#define INTC_INT_FALL_EDGE 0x2 +#define INTC_INT_RISE_AND_FALL_EDGE 0x3 +#define INTC_INT_HIGH_LEVEL 0x5 +#define INTC_INT_LOW_LEVEL 0x6 +#define INTC_INT_HIGH_AND_LOW_LEVEL 0x7 + +/* Interrupt Numbers */ +#define AU1X00_UART0_INT 0 +#define AU1000_UART1_INT 1 /* au1000 */ +#define AU1000_UART2_INT 2 /* au1000 */ + +#define AU1500_PCI_INTA 1 /* au1500 */ +#define AU1500_PCI_INTB 2 /* au1500 */ + +#define AU1X00_UART3_INT 3 + +#define AU1000_SSI0_INT 4 /* au1000 */ +#define AU1000_SSI1_INT 5 /* au1000 */ + +#define AU1500_PCI_INTC 4 /* au1500 */ +#define AU1500_PCI_INTD 5 /* au1500 */ + +#define AU1X00_DMA_INT_BASE 6 +#define AU1X00_TOY_INT 14 +#define AU1X00_TOY_MATCH0_INT 15 +#define AU1X00_TOY_MATCH1_INT 16 +#define AU1X00_TOY_MATCH2_INT 17 +#define AU1X00_RTC_INT 18 +#define AU1X00_RTC_MATCH0_INT 19 +#define AU1X00_RTC_MATCH1_INT 20 +#define AU1X00_RTC_MATCH2_INT 21 +#define AU1000_IRDA_TX_INT 22 /* au1000 */ +#define AU1000_IRDA_RX_INT 23 /* au1000 */ +#define AU1X00_USB_DEV_REQ_INT 24 +#define AU1X00_USB_DEV_SUS_INT 25 +#define AU1X00_USB_HOST_INT 26 +#define AU1X00_ACSYNC_INT 27 +#define AU1X00_MAC0_DMA_INT 28 +#define AU1X00_MAC1_DMA_INT 29 +#define AU1X00_ETH0_IRQ AU1X00_MAC0_DMA_INT +#define AU1X00_ETH1_IRQ AU1X00_MAC1_DMA_INT +#define AU1000_I2S_UO_INT 30 /* au1000 */ +#define AU1X00_AC97C_INT 31 +#define AU1X00_LAST_INTC0_INT AU1X00_AC97C_INT +#define AU1X00_GPIO_0 32 +#define AU1X00_GPIO_1 33 +#define AU1X00_GPIO_2 34 +#define AU1X00_GPIO_3 35 +#define AU1X00_GPIO_4 36 +#define AU1X00_GPIO_5 37 +#define AU1X00_GPIO_6 38 +#define AU1X00_GPIO_7 39 +#define AU1X00_GPIO_8 40 +#define AU1X00_GPIO_9 41 +#define AU1X00_GPIO_10 42 +#define AU1X00_GPIO_11 43 +#define AU1X00_GPIO_12 44 +#define AU1X00_GPIO_13 45 +#define AU1X00_GPIO_14 46 +#define AU1X00_GPIO_15 47 + +/* Au1000 only */ +#define AU1000_GPIO_16 48 +#define AU1000_GPIO_17 49 +#define AU1000_GPIO_18 50 +#define AU1000_GPIO_19 51 +#define AU1000_GPIO_20 52 +#define AU1000_GPIO_21 53 +#define AU1000_GPIO_22 54 +#define AU1000_GPIO_23 55 +#define AU1000_GPIO_24 56 +#define AU1000_GPIO_25 57 +#define AU1000_GPIO_26 58 +#define AU1000_GPIO_27 59 +#define AU1000_GPIO_28 60 +#define AU1000_GPIO_29 61 +#define AU1000_GPIO_30 62 +#define AU1000_GPIO_31 63 + +/* Au1500 only */ +#define AU1500_GPIO_200 48 +#define AU1500_GPIO_201 49 +#define AU1500_GPIO_202 50 +#define AU1500_GPIO_203 51 +#define AU1500_GPIO_20 52 +#define AU1500_GPIO_204 53 +#define AU1500_GPIO_205 54 +#define AU1500_GPIO_23 55 +#define AU1500_GPIO_24 56 +#define AU1500_GPIO_25 57 +#define AU1500_GPIO_26 58 +#define AU1500_GPIO_27 59 +#define AU1500_GPIO_28 60 +#define AU1500_GPIO_206 61 +#define AU1500_GPIO_207 62 +#define AU1500_GPIO_208_215 63 + +#define AU1X00_MAX_INTR 63 + +#define AU1100_SD 2 +#define AU1100_GPIO_208_215 29 +/* REDEFINE SECONDARY GPIO BLOCK INTO IC1 CONTROLLER HERE */ + +/* Programmable Counters 0 and 1 */ +#define SYS_BASE 0xB1900000 +#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14) +#define SYS_CNTRL_E1S (1<<23) +#define SYS_CNTRL_T1S (1<<20) +#define SYS_CNTRL_M21 (1<<19) +#define SYS_CNTRL_M11 (1<<18) +#define SYS_CNTRL_M01 (1<<17) +#define SYS_CNTRL_C1S (1<<16) +#define SYS_CNTRL_BP (1<<14) +#define SYS_CNTRL_EN1 (1<<13) +#define SYS_CNTRL_BT1 (1<<12) +#define SYS_CNTRL_EN0 (1<<11) +#define SYS_CNTRL_BT0 (1<<10) +#define SYS_CNTRL_E0 (1<<8) +#define SYS_CNTRL_E0S (1<<7) +#define SYS_CNTRL_32S (1<<5) +#define SYS_CNTRL_T0S (1<<4) +#define SYS_CNTRL_M20 (1<<3) +#define SYS_CNTRL_M10 (1<<2) +#define SYS_CNTRL_M00 (1<<1) +#define SYS_CNTRL_C0S (1<<0) + +/* Programmable Counter 0 Registers */ +#define SYS_TOYTRIM (SYS_BASE + 0) +#define SYS_TOYWRITE (SYS_BASE + 4) +#define SYS_TOYMATCH0 (SYS_BASE + 8) +#define SYS_TOYMATCH1 (SYS_BASE + 0xC) +#define SYS_TOYMATCH2 (SYS_BASE + 0x10) +#define SYS_TOYREAD (SYS_BASE + 0x40) + +/* Programmable Counter 1 Registers */ +#define SYS_RTCTRIM (SYS_BASE + 0x44) +#define SYS_RTCWRITE (SYS_BASE + 0x48) +#define SYS_RTCMATCH0 (SYS_BASE + 0x4C) +#define SYS_RTCMATCH1 (SYS_BASE + 0x50) +#define SYS_RTCMATCH2 (SYS_BASE + 0x54) +#define SYS_RTCREAD (SYS_BASE + 0x58) + +/* I2S Controller */ +#define I2S_DATA 0xB1000000 +#define I2S_DATA_MASK (0xffffff) +#define I2S_CONFIG 0xB1000004 +#define I2S_CONFIG_XU (1<<25) +#define I2S_CONFIG_XO (1<<24) +#define I2S_CONFIG_RU (1<<23) +#define I2S_CONFIG_RO (1<<22) +#define I2S_CONFIG_TR (1<<21) +#define I2S_CONFIG_TE (1<<20) +#define I2S_CONFIG_TF (1<<19) +#define I2S_CONFIG_RR (1<<18) +#define I2S_CONFIG_RE (1<<17) +#define I2S_CONFIG_RF (1<<16) +#define I2S_CONFIG_PD (1<<11) +#define I2S_CONFIG_LB (1<<10) +#define I2S_CONFIG_IC (1<<9) +#define I2S_CONFIG_FM_BIT 7 +#define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT) +#define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT) +#define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT) +#define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT) +#define I2S_CONFIG_TN (1<<6) +#define I2S_CONFIG_RN (1<<5) +#define I2S_CONFIG_SZ_BIT 0 +#define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT) + +#define I2S_CONTROL 0xB1000008 +#define I2S_CONTROL_D (1<<1) +#define I2S_CONTROL_CE (1<<0) + +/* USB Host Controller */ +/* We pass USB_OHCI_BASE to ioremap, so it needs to be a physical address */ +#define USB_OHCI_BASE 0x10100000 +#define USB_OHCI_LEN 0x00100000 +#define USB_HOST_CONFIG 0xB017fffc + +/* USB Device Controller */ +#define USBD_EP0RD 0xB0200000 +#define USBD_EP0WR 0xB0200004 +#define USBD_EP2WR 0xB0200008 +#define USBD_EP3WR 0xB020000C +#define USBD_EP4RD 0xB0200010 +#define USBD_EP5RD 0xB0200014 +#define USBD_INTEN 0xB0200018 +#define USBD_INTSTAT 0xB020001C +#define USBDEV_INT_SOF (1<<12) +#define USBDEV_INT_HF_BIT 6 +#define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT) +#define USBDEV_INT_CMPLT_BIT 0 +#define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT) +#define USBD_CONFIG 0xB0200020 +#define USBD_EP0CS 0xB0200024 +#define USBD_EP2CS 0xB0200028 +#define USBD_EP3CS 0xB020002C +#define USBD_EP4CS 0xB0200030 +#define USBD_EP5CS 0xB0200034 +#define USBDEV_CS_SU (1<<14) +#define USBDEV_CS_NAK (1<<13) +#define USBDEV_CS_ACK (1<<12) +#define USBDEV_CS_BUSY (1<<11) +#define USBDEV_CS_TSIZE_BIT 1 +#define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT) +#define USBDEV_CS_STALL (1<<0) +#define USBD_EP0RDSTAT 0xB0200040 +#define USBD_EP0WRSTAT 0xB0200044 +#define USBD_EP2WRSTAT 0xB0200048 +#define USBD_EP3WRSTAT 0xB020004C +#define USBD_EP4RDSTAT 0xB0200050 +#define USBD_EP5RDSTAT 0xB0200054 +#define USBDEV_FSTAT_FLUSH (1<<6) +#define USBDEV_FSTAT_UF (1<<5) +#define USBDEV_FSTAT_OF (1<<4) +#define USBDEV_FSTAT_FCNT_BIT 0 +#define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT) +#define USBD_ENABLE 0xB0200058 +#define USBDEV_ENABLE (1<<1) +#define USBDEV_CE (1<<0) + +/* Ethernet Controllers */ +#define AU1000_ETH0_BASE 0xB0500000 +#define AU1000_ETH1_BASE 0xB0510000 +#define AU1500_ETH0_BASE 0xB1500000 +#define AU1500_ETH1_BASE 0xB1510000 +#define AU1100_ETH0_BASE 0xB0500000 +#define AU1550_ETH0_BASE 0xB0500000 +#define AU1550_ETH1_BASE 0xB0510000 + +/* 4 byte offsets from AU1000_ETH_BASE */ +#define MAC_CONTROL 0x0 +#define MAC_RX_ENABLE (1<<2) +#define MAC_TX_ENABLE (1<<3) +#define MAC_DEF_CHECK (1<<5) +#define MAC_SET_BL(X) (((X)&0x3)<<6) +#define MAC_AUTO_PAD (1<<8) +#define MAC_DISABLE_RETRY (1<<10) +#define MAC_DISABLE_BCAST (1<<11) +#define MAC_LATE_COL (1<<12) +#define MAC_HASH_MODE (1<<13) +#define MAC_HASH_ONLY (1<<15) +#define MAC_PASS_ALL (1<<16) +#define MAC_INVERSE_FILTER (1<<17) +#define MAC_PROMISCUOUS (1<<18) +#define MAC_PASS_ALL_MULTI (1<<19) +#define MAC_FULL_DUPLEX (1<<20) +#define MAC_NORMAL_MODE 0 +#define MAC_INT_LOOPBACK (1<<21) +#define MAC_EXT_LOOPBACK (1<<22) +#define MAC_DISABLE_RX_OWN (1<<23) +#define MAC_BIG_ENDIAN (1<<30) +#define MAC_RX_ALL (1<<31) +#define MAC_ADDRESS_HIGH 0x4 +#define MAC_ADDRESS_LOW 0x8 +#define MAC_MCAST_HIGH 0xC +#define MAC_MCAST_LOW 0x10 +#define MAC_MII_CNTRL 0x14 +#define MAC_MII_BUSY (1<<0) +#define MAC_MII_READ 0 +#define MAC_MII_WRITE (1<<1) +#define MAC_SET_MII_SELECT_REG(X) (((X)&0x1f)<<6) +#define MAC_SET_MII_SELECT_PHY(X) (((X)&0x1f)<<11) +#define MAC_MII_DATA 0x18 +#define MAC_FLOW_CNTRL 0x1C +#define MAC_FLOW_CNTRL_BUSY (1<<0) +#define MAC_FLOW_CNTRL_ENABLE (1<<1) +#define MAC_PASS_CONTROL (1<<2) +#define MAC_SET_PAUSE(X) (((X)&0xffff)<<16) +#define MAC_VLAN1_TAG 0x20 +#define MAC_VLAN2_TAG 0x24 + +/* Ethernet Controller Enable */ +#define AU1000_MAC0_ENABLE 0xB0520000 +#define AU1000_MAC1_ENABLE 0xB0520004 +#define AU1500_MAC0_ENABLE 0xB1520000 +#define AU1500_MAC1_ENABLE 0xB1520004 +#define AU1100_MAC0_ENABLE 0xB0520000 +#define AU1550_MAC0_ENABLE 0xB0520000 +#define AU1550_MAC1_ENABLE 0xB0520004 + +#define MAC_EN_CLOCK_ENABLE (1<<0) +#define MAC_EN_RESET0 (1<<1) +#define MAC_EN_TOSS (0<<2) +#define MAC_EN_CACHEABLE (1<<3) +#define MAC_EN_RESET1 (1<<4) +#define MAC_EN_RESET2 (1<<5) +#define MAC_DMA_RESET (1<<6) + +/* Ethernet Controller DMA Channels */ + +#define MAC0_TX_DMA_ADDR 0xB4004000 +#define MAC1_TX_DMA_ADDR 0xB4004200 +/* offsets from MAC_TX_RING_ADDR address */ +#define MAC_TX_BUFF0_STATUS 0x0 +#define TX_FRAME_ABORTED (1<<0) +#define TX_JAB_TIMEOUT (1<<1) +#define TX_NO_CARRIER (1<<2) +#define TX_LOSS_CARRIER (1<<3) +#define TX_EXC_DEF (1<<4) +#define TX_LATE_COLL_ABORT (1<<5) +#define TX_EXC_COLL (1<<6) +#define TX_UNDERRUN (1<<7) +#define TX_DEFERRED (1<<8) +#define TX_LATE_COLL (1<<9) +#define TX_COLL_CNT_MASK (0xF<<10) +#define TX_PKT_RETRY (1<<31) +#define MAC_TX_BUFF0_ADDR 0x4 +#define TX_DMA_ENABLE (1<<0) +#define TX_T_DONE (1<<1) +#define TX_GET_DMA_BUFFER(X) (((X)>>2)&0x3) +#define MAC_TX_BUFF0_LEN 0x8 +#define MAC_TX_BUFF1_STATUS 0x10 +#define MAC_TX_BUFF1_ADDR 0x14 +#define MAC_TX_BUFF1_LEN 0x18 +#define MAC_TX_BUFF2_STATUS 0x20 +#define MAC_TX_BUFF2_ADDR 0x24 +#define MAC_TX_BUFF2_LEN 0x28 +#define MAC_TX_BUFF3_STATUS 0x30 +#define MAC_TX_BUFF3_ADDR 0x34 +#define MAC_TX_BUFF3_LEN 0x38 + +#define MAC0_RX_DMA_ADDR 0xB4004100 +#define MAC1_RX_DMA_ADDR 0xB4004300 +/* offsets from MAC_RX_RING_ADDR */ +#define MAC_RX_BUFF0_STATUS 0x0 +#define RX_FRAME_LEN_MASK 0x3fff +#define RX_WDOG_TIMER (1<<14) +#define RX_RUNT (1<<15) +#define RX_OVERLEN (1<<16) +#define RX_COLL (1<<17) +#define RX_ETHER (1<<18) +#define RX_MII_ERROR (1<<19) +#define RX_DRIBBLING (1<<20) +#define RX_CRC_ERROR (1<<21) +#define RX_VLAN1 (1<<22) +#define RX_VLAN2 (1<<23) +#define RX_LEN_ERROR (1<<24) +#define RX_CNTRL_FRAME (1<<25) +#define RX_U_CNTRL_FRAME (1<<26) +#define RX_MCAST_FRAME (1<<27) +#define RX_BCAST_FRAME (1<<28) +#define RX_FILTER_FAIL (1<<29) +#define RX_PACKET_FILTER (1<<30) +#define RX_MISSED_FRAME (1<<31) + +#define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \ + RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \ + RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME) +#define MAC_RX_BUFF0_ADDR 0x4 +#define RX_DMA_ENABLE (1<<0) +#define RX_T_DONE (1<<1) +#define RX_GET_DMA_BUFFER(X) (((X)>>2)&0x3) +#define RX_SET_BUFF_ADDR(X) ((X)&0xffffffc0) +#define MAC_RX_BUFF1_STATUS 0x10 +#define MAC_RX_BUFF1_ADDR 0x14 +#define MAC_RX_BUFF2_STATUS 0x20 +#define MAC_RX_BUFF2_ADDR 0x24 +#define MAC_RX_BUFF3_STATUS 0x30 +#define MAC_RX_BUFF3_ADDR 0x34 + + +/* UARTS 0-3 */ +#define UART0_ADDR 0xB1100000 +#define UART1_ADDR 0xB1200000 +#define UART2_ADDR 0xB1300000 +#define UART3_ADDR 0xB1400000 +#define UART_BASE UART0_ADDR +#define UART_DEBUG_BASE UART2_ADDR + +#define UART_RX 0 /* Receive buffer */ +#define UART_TX 4 /* Transmit buffer */ +#define UART_IER 8 /* Interrupt Enable Register */ +#define UART_IIR 0xC /* Interrupt ID Register */ +#define UART_FCR 0x10 /* FIFO Control Register */ +#define UART_LCR 0x14 /* Line Control Register */ +#define UART_MCR 0x18 /* Modem Control Register */ +#define UART_LSR 0x1C /* Line Status Register */ +#define UART_MSR 0x20 /* Modem Status Register */ +#define UART_CLK 0x28 /* Baud Rate Clock Divider */ +#define UART_ENABLE 0x100 /* Uart enable */ + +#define UART_EN_CE 1 /* Clock enable */ +#define UART_EN_E 2 /* Enable */ + +#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ +#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ +#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ +#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ +#define UART_FCR_TRIGGER_MASK 0xF0 /* Mask for the FIFO trigger range */ +#define UART_FCR_R_TRIGGER_1 0x00 /* Mask for receive trigger set at 1 */ +#define UART_FCR_R_TRIGGER_4 0x40 /* Mask for receive trigger set at 4 */ +#define UART_FCR_R_TRIGGER_8 0x80 /* Mask for receive trigger set at 8 */ +#define UART_FCR_R_TRIGGER_14 0xA0 /* Mask for receive trigger set at 14 */ +#define UART_FCR_T_TRIGGER_0 0x00 /* Mask for transmit trigger set at 0 */ +#define UART_FCR_T_TRIGGER_4 0x10 /* Mask for transmit trigger set at 4 */ +#define UART_FCR_T_TRIGGER_8 0x20 /* Mask for transmit trigger set at 8 */ +#define UART_FCR_T_TRIGGER_12 0x30 /* Mask for transmit trigger set at 12 */ + +/* + * These are the definitions for the Line Control Register + */ +#define UART_LCR_SBC 0x40 /* Set break control */ +#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ +#define UART_LCR_EPAR 0x10 /* Even parity select */ +#define UART_LCR_PARITY 0x08 /* Parity Enable */ +#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ +#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ +#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ +#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ +#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ + +/* + * These are the definitions for the Line Status Register + */ +#define UART_LSR_TEMT 0x40 /* Transmitter empty */ +#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ +#define UART_LSR_BI 0x10 /* Break interrupt indicator */ +#define UART_LSR_FE 0x08 /* Frame error indicator */ +#define UART_LSR_PE 0x04 /* Parity error indicator */ +#define UART_LSR_OE 0x02 /* Overrun error indicator */ +#define UART_LSR_DR 0x01 /* Receiver data ready */ + +/* + * These are the definitions for the Interrupt Identification Register + */ +#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ +#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ +#define UART_IIR_MSI 0x00 /* Modem status interrupt */ +#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ +#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ +#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ + +/* + * These are the definitions for the Interrupt Enable Register + */ +#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ +#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ +#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ +#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ + +/* + * These are the definitions for the Modem Control Register + */ +#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ +#define UART_MCR_OUT2 0x08 /* Out2 complement */ +#define UART_MCR_OUT1 0x04 /* Out1 complement */ +#define UART_MCR_RTS 0x02 /* RTS complement */ +#define UART_MCR_DTR 0x01 /* DTR complement */ + +/* + * These are the definitions for the Modem Status Register + */ +#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ +#define UART_MSR_RI 0x40 /* Ring Indicator */ +#define UART_MSR_DSR 0x20 /* Data Set Ready */ +#define UART_MSR_CTS 0x10 /* Clear to Send */ +#define UART_MSR_DDCD 0x08 /* Delta DCD */ +#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ +#define UART_MSR_DDSR 0x02 /* Delta DSR */ +#define UART_MSR_DCTS 0x01 /* Delta CTS */ +#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ + + +/* SSIO */ +#define SSI0_STATUS 0xB1600000 +#define SSI_STATUS_BF (1<<4) +#define SSI_STATUS_OF (1<<3) +#define SSI_STATUS_UF (1<<2) +#define SSI_STATUS_D (1<<1) +#define SSI_STATUS_B (1<<0) +#define SSI0_INT 0xB1600004 +#define SSI_INT_OI (1<<3) +#define SSI_INT_UI (1<<2) +#define SSI_INT_DI (1<<1) +#define SSI0_INT_ENABLE 0xB1600008 +#define SSI_INTE_OIE (1<<3) +#define SSI_INTE_UIE (1<<2) +#define SSI_INTE_DIE (1<<1) +#define SSI0_CONFIG 0xB1600020 +#define SSI_CONFIG_AO (1<<24) +#define SSI_CONFIG_DO (1<<23) +#define SSI_CONFIG_ALEN_BIT 20 +#define SSI_CONFIG_ALEN_MASK (0x7<<20) +#define SSI_CONFIG_DLEN_BIT 16 +#define SSI_CONFIG_DLEN_MASK (0x7<<16) +#define SSI_CONFIG_DD (1<<11) +#define SSI_CONFIG_AD (1<<10) +#define SSI_CONFIG_BM_BIT 8 +#define SSI_CONFIG_BM_MASK (0x3<<8) +#define SSI_CONFIG_CE (1<<7) +#define SSI_CONFIG_DP (1<<6) +#define SSI_CONFIG_DL (1<<5) +#define SSI_CONFIG_EP (1<<4) +#define SSI0_ADATA 0xB1600024 +#define SSI_AD_D (1<<24) +#define SSI_AD_ADDR_BIT 16 +#define SSI_AD_ADDR_MASK (0xff<<16) +#define SSI_AD_DATA_BIT 0 +#define SSI_AD_DATA_MASK (0xfff<<0) +#define SSI0_CLKDIV 0xB1600028 +#define SSI0_CONTROL 0xB1600100 +#define SSI_CONTROL_CD (1<<1) +#define SSI_CONTROL_E (1<<0) + +/* SSI1 */ +#define SSI1_STATUS 0xB1680000 +#define SSI1_INT 0xB1680004 +#define SSI1_INT_ENABLE 0xB1680008 +#define SSI1_CONFIG 0xB1680020 +#define SSI1_ADATA 0xB1680024 +#define SSI1_CLKDIV 0xB1680028 +#define SSI1_ENABLE 0xB1680100 + +/* + * Register content definitions + */ +#define SSI_STATUS_BF (1<<4) +#define SSI_STATUS_OF (1<<3) +#define SSI_STATUS_UF (1<<2) +#define SSI_STATUS_D (1<<1) +#define SSI_STATUS_B (1<<0) + +/* SSI_INT */ +#define SSI_INT_OI (1<<3) +#define SSI_INT_UI (1<<2) +#define SSI_INT_DI (1<<1) + +/* SSI_INTEN */ +#define SSI_INTEN_OIE (1<<3) +#define SSI_INTEN_UIE (1<<2) +#define SSI_INTEN_DIE (1<<1) + +#define SSI_CONFIG_AO (1<<24) +#define SSI_CONFIG_DO (1<<23) +#define SSI_CONFIG_ALEN (7<<20) +#define SSI_CONFIG_DLEN (15<<16) +#define SSI_CONFIG_DD (1<<11) +#define SSI_CONFIG_AD (1<<10) +#define SSI_CONFIG_BM (3<<8) +#define SSI_CONFIG_CE (1<<7) +#define SSI_CONFIG_DP (1<<6) +#define SSI_CONFIG_DL (1<<5) +#define SSI_CONFIG_EP (1<<4) +#define SSI_CONFIG_ALEN_N(N) ((N-1)<<20) +#define SSI_CONFIG_DLEN_N(N) ((N-1)<<16) +#define SSI_CONFIG_BM_HI (0<<8) +#define SSI_CONFIG_BM_LO (1<<8) +#define SSI_CONFIG_BM_CY (2<<8) + +#define SSI_ADATA_D (1<<24) +#define SSI_ADATA_ADDR (0xFF<<16) +#define SSI_ADATA_DATA (0x0FFF) +#define SSI_ADATA_ADDR_N(N) (N<<16) + +#define SSI_ENABLE_CD (1<<1) +#define SSI_ENABLE_E (1<<0) + + +/* IrDA Controller */ +#define IRDA_BASE 0xB0300000 +#define IR_RING_PTR_STATUS (IRDA_BASE+0x00) +#define IR_RING_BASE_ADDR_H (IRDA_BASE+0x04) +#define IR_RING_BASE_ADDR_L (IRDA_BASE+0x08) +#define IR_RING_SIZE (IRDA_BASE+0x0C) +#define IR_RING_PROMPT (IRDA_BASE+0x10) +#define IR_RING_ADDR_CMPR (IRDA_BASE+0x14) +#define IR_INT_CLEAR (IRDA_BASE+0x18) +#define IR_CONFIG_1 (IRDA_BASE+0x20) +#define IR_RX_INVERT_LED (1<<0) +#define IR_TX_INVERT_LED (1<<1) +#define IR_ST (1<<2) +#define IR_SF (1<<3) +#define IR_SIR (1<<4) +#define IR_MIR (1<<5) +#define IR_FIR (1<<6) +#define IR_16CRC (1<<7) +#define IR_TD (1<<8) +#define IR_RX_ALL (1<<9) +#define IR_DMA_ENABLE (1<<10) +#define IR_RX_ENABLE (1<<11) +#define IR_TX_ENABLE (1<<12) +#define IR_LOOPBACK (1<<14) +#define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \ + IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC) +#define IR_SIR_FLAGS (IRDA_BASE+0x24) +#define IR_ENABLE (IRDA_BASE+0x28) +#define IR_RX_STATUS (1<<9) +#define IR_TX_STATUS (1<<10) +#define IR_READ_PHY_CONFIG (IRDA_BASE+0x2C) +#define IR_WRITE_PHY_CONFIG (IRDA_BASE+0x30) +#define IR_MAX_PKT_LEN (IRDA_BASE+0x34) +#define IR_RX_BYTE_CNT (IRDA_BASE+0x38) +#define IR_CONFIG_2 (IRDA_BASE+0x3C) +#define IR_MODE_INV (1<<0) +#define IR_ONE_PIN (1<<1) +#define IR_INTERFACE_CONFIG (IRDA_BASE+0x40) + +/* GPIO */ +#define SYS_PINFUNC 0xB190002C +#define SYS_PF_USB (1<<15) /* 2nd USB device/host */ +#define SYS_PF_U3 (1<<14) /* GPIO23/U3TXD */ +#define SYS_PF_U2 (1<<13) /* GPIO22/U2TXD */ +#define SYS_PF_U1 (1<<12) /* GPIO21/U1TXD */ +#define SYS_PF_SRC (1<<11) /* GPIO6/SROMCKE */ +#define SYS_PF_CK5 (1<<10) /* GPIO3/CLK5 */ +#define SYS_PF_CK4 (1<<9) /* GPIO2/CLK4 */ +#define SYS_PF_IRF (1<<8) /* GPIO15/IRFIRSEL */ +#define SYS_PF_UR3 (1<<7) /* GPIO[14:9]/UART3 */ +#define SYS_PF_I2D (1<<6) /* GPIO8/I2SDI */ +#define SYS_PF_I2S (1<<5) /* I2S/GPIO[29:31] */ +#define SYS_PF_NI2 (1<<4) /* NI2/GPIO[24:28] */ +#define SYS_PF_U0 (1<<3) /* U0TXD/GPIO20 */ +#define SYS_PF_RD (1<<2) /* IRTXD/GPIO19 */ +#define SYS_PF_A97 (1<<1) /* AC97/SSL1 */ +#define SYS_PF_S0 (1<<0) /* SSI_0/GPIO[16:18] */ +#define SYS_TRIOUTRD 0xB1900100 +#define SYS_TRIOUTCLR 0xB1900100 +#define SYS_OUTPUTRD 0xB1900108 +#define SYS_OUTPUTSET 0xB1900108 +#define SYS_OUTPUTCLR 0xB190010C +#define SYS_PINSTATERD 0xB1900110 +#define SYS_PININPUTEN 0xB1900110 + +/* GPIO2, Au1500 only */ +#define GPIO2_BASE 0xB1700000 +#define GPIO2_DIR (GPIO2_BASE + 0) +#define GPIO2_DATA_EN (GPIO2_BASE + 8) +#define GPIO2_PIN_STATE (GPIO2_BASE + 0xC) +#define GPIO2_INT_ENABLE (GPIO2_BASE + 0x10) +#define GPIO2_ENABLE (GPIO2_BASE + 0x14) + +/* Power Management */ +#define SYS_SCRATCH0 0xB1900018 +#define SYS_SCRATCH1 0xB190001C +#define SYS_WAKEMSK 0xB1900034 +#define SYS_ENDIAN 0xB1900038 +#define SYS_POWERCTRL 0xB190003C +#define SYS_WAKESRC 0xB190005C +#define SYS_SLPPWR 0xB1900078 +#define SYS_SLEEP 0xB190007C + +/* Clock Controller */ +#define SYS_FREQCTRL0 0xB1900020 +#define SYS_FC_FRDIV2_BIT 22 +#define SYS_FC_FRDIV2_MASK (0xff << FQC2_FRDIV2_BIT) +#define SYS_FC_FE2 (1<<21) +#define SYS_FC_FS2 (1<<20) +#define SYS_FC_FRDIV1_BIT 12 +#define SYS_FC_FRDIV1_MASK (0xff << FQC2_FRDIV1_BIT) +#define SYS_FC_FE1 (1<<11) +#define SYS_FC_FS1 (1<<10) +#define SYS_FC_FRDIV0_BIT 2 +#define SYS_FC_FRDIV0_MASK (0xff << FQC2_FRDIV0_BIT) +#define SYS_FC_FE0 (1<<1) +#define SYS_FC_FS0 (1<<0) +#define SYS_FREQCTRL1 0xB1900024 +#define SYS_FC_FRDIV5_BIT 22 +#define SYS_FC_FRDIV5_MASK (0xff << FQC2_FRDIV5_BIT) +#define SYS_FC_FE5 (1<<21) +#define SYS_FC_FS5 (1<<20) +#define SYS_FC_FRDIV4_BIT 12 +#define SYS_FC_FRDIV4_MASK (0xff << FQC2_FRDIV4_BIT) +#define SYS_FC_FE4 (1<<11) +#define SYS_FC_FS4 (1<<10) +#define SYS_FC_FRDIV3_BIT 2 +#define SYS_FC_FRDIV3_MASK (0xff << FQC2_FRDIV3_BIT) +#define SYS_FC_FE3 (1<<1) +#define SYS_FC_FS3 (1<<0) +#define SYS_CLKSRC 0xB1900028 +#define SYS_CS_ME1_BIT 27 +#define SYS_CS_ME1_MASK (0x7<<CSC_ME1_BIT) +#define SYS_CS_DE1 (1<<26) +#define SYS_CS_CE1 (1<<25) +#define SYS_CS_ME0_BIT 22 +#define SYS_CS_ME0_MASK (0x7<<CSC_ME0_BIT) +#define SYS_CS_DE0 (1<<21) +#define SYS_CS_CE0 (1<<20) +#define SYS_CS_MI2_BIT 17 +#define SYS_CS_MI2_MASK (0x7<<CSC_MI2_BIT) +#define SYS_CS_DI2 (1<<16) +#define SYS_CS_CI2 (1<<15) +#define SYS_CS_MUH_BIT 12 +#define SYS_CS_MUH_MASK (0x7<<CSC_MUH_BIT) +#define SYS_CS_DUH (1<<11) +#define SYS_CS_CUH (1<<10) +#define SYS_CS_MUD_BIT 7 +#define SYS_CS_MUD_MASK (0x7<<CSC_MUD_BIT) +#define SYS_CS_DUD (1<<6) +#define SYS_CS_CUD (1<<5) +#define SYS_CS_MIR_BIT 2 +#define SYS_CS_MIR_MASK (0x7<<CSC_MIR_BIT) +#define SYS_CS_DIR (1<<1) +#define SYS_CS_CIR (1<<0) + +#define SYS_CS_MUX_AUX 0x1 +#define SYS_CS_MUX_FQ0 0x2 +#define SYS_CS_MUX_FQ1 0x3 +#define SYS_CS_MUX_FQ2 0x4 +#define SYS_CS_MUX_FQ3 0x5 +#define SYS_CS_MUX_FQ4 0x6 +#define SYS_CS_MUX_FQ5 0x7 +#define SYS_CPUPLL 0xB1900060 +#define SYS_AUXPLL 0xB1900064 + +/* AC97 Controller */ +#define AC97C_CONFIG 0xB0000000 +#define AC97C_RECV_SLOTS_BIT 13 +#define AC97C_RECV_SLOTS_MASK (0x3ff << AC97C_RECV_SLOTS_BIT) +#define AC97C_XMIT_SLOTS_BIT 3 +#define AC97C_XMIT_SLOTS_MASK (0x3ff << AC97C_XMIT_SLOTS_BIT) +#define AC97C_SG (1<<2) +#define AC97C_SYNC (1<<1) +#define AC97C_RESET (1<<0) +#define AC97C_STATUS 0xB0000004 +#define AC97C_XU (1<<11) +#define AC97C_XO (1<<10) +#define AC97C_RU (1<<9) +#define AC97C_RO (1<<8) +#define AC97C_READY (1<<7) +#define AC97C_CP (1<<6) +#define AC97C_TR (1<<5) +#define AC97C_TE (1<<4) +#define AC97C_TF (1<<3) +#define AC97C_RR (1<<2) +#define AC97C_RE (1<<1) +#define AC97C_RF (1<<0) +#define AC97C_DATA 0xB0000008 +#define AC97C_CMD 0xB000000C +#define AC97C_WD_BIT 16 +#define AC97C_READ (1<<7) +#define AC97C_INDEX_MASK 0x7f +#define AC97C_CNTRL 0xB0000010 +#define AC97C_RS (1<<1) +#define AC97C_CE (1<<0) + +#define DB1000_BCSR_ADDR 0xAE000000 +#define DB1550_BCSR_ADDR 0xAF000000 + +#ifdef CONFIG_DBAU1550 +#define DB1XX0_BCSR_ADDR DB1550_BCSR_ADDR +#else +#define DB1XX0_BCSR_ADDR DB1000_BCSR_ADDR +#endif + +#ifdef CONFIG_SOC_AU1500 +/* Au1500 PCI Controller */ +#define Au1500_CFG_BASE 0xB4005000 /* virtual, kseg0 addr */ +#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0) +#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4) +#define PCI_ERROR ((1<<22) | (1<<23) | (1<<24) | (1<<25) | (1<<26) | (1<<27)) +#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8) +#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC) +#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10) +#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14) +#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18) +#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C) +#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20) +#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100) +#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104) +#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108) +#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C) +#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110) + +#define Au1500_PCI_HDR 0xB4005100 /* virtual, kseg0 addr */ + +/* All of our structures, like pci resource, have 32 bit members. + * Drivers are expected to do an ioremap on the PCI MEM resource, but it's + * hard to store 0x4 0000 0000 in a 32 bit type. We require a small patch + * to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and + * (u32)Au1500_PCI_MEM_END and change those to the full 36 bit PCI MEM + * addresses. For PCI IO, it's simpler because we get to do the ioremap + * ourselves and then adjust the device's resources. + */ +#define Au1500_EXT_CFG 0x600000000 +#define Au1500_EXT_CFG_TYPE1 0x680000000 +#define Au1500_PCI_IO_START 0x500000000 +#define Au1500_PCI_IO_END 0x5000FFFFF +#define Au1500_PCI_MEM_START 0x440000000 +#define Au1500_PCI_MEM_END 0x443FFFFFF + +#define PCI_IO_START (Au1500_PCI_IO_START + 0x300) +#define PCI_IO_END (Au1500_PCI_IO_END) +#define PCI_MEM_START (Au1500_PCI_MEM_START) +#define PCI_MEM_END (Au1500_PCI_MEM_END) +#define PCI_FIRST_DEVFN (0<<3) +#define PCI_LAST_DEVFN (19<<3) + +#endif + +#if defined(CONFIG_SOC_AU1100) || (defined(CONFIG_SOC_AU1000) && !defined(CONFIG_MIPS_PB1000)) +/* no PCI bus controller */ +#define PCI_IO_START 0 +#define PCI_IO_END 0 +#define PCI_MEM_START 0 +#define PCI_MEM_END 0 +#define PCI_FIRST_DEVFN 0 +#define PCI_LAST_DEVFN 0 +#endif +#define AU1X_SOCK0_IO 0xF00000000 +#define AU1X_SOCK0_PHYS_ATTR 0xF40000000 +#define AU1X_SOCK0_PHYS_MEM 0xF80000000 + +/* pcmcia socket 1 needs external glue logic so the memory map + * differs from board to board. + */ + +/* Only for db board, not older pb */ +#define AU1X_SOCK1_IO 0xF04000000 +#define AU1X_SOCK1_PHYS_ATTR 0xF44000000 +#define AU1X_SOCK1_PHYS_MEM 0xF84000000 + +#endif diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h new file mode 100644 index 0000000000..1c8f4c0500 --- /dev/null +++ b/arch/mips/include/asm/bitops.h @@ -0,0 +1,902 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1994 - 1997, 1999, 2000 Ralf Baechle (ralf@gnu.org) + * Copyright (c) 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_BITOPS_H +#define _ASM_BITOPS_H + +#include <linux/types.h> +#include <asm/byteorder.h> /* sigh ... */ + +#ifdef __KERNEL__ + +#include <asm/sgidefs.h> +#include <asm/system.h> +#include <linux/config.h> + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +/* + * Only disable interrupt for kernel mode stuff to keep usermode stuff + * that dares to use kernel include files alive. + */ +#define __bi_flags unsigned long flags +#define __bi_cli() __cli() +#define __bi_save_flags(x) __save_flags(x) +#define __bi_save_and_cli(x) __save_and_cli(x) +#define __bi_restore_flags(x) __restore_flags(x) +#else +#define __bi_flags +#define __bi_cli() +#define __bi_save_flags(x) +#define __bi_save_and_cli(x) +#define __bi_restore_flags(x) +#endif /* __KERNEL__ */ + +#ifdef CONFIG_CPU_HAS_LLSC + +#include <asm/mipsregs.h> + +/* + * These functions for MIPS ISA > 1 are interrupt and SMP proof and + * interrupt friendly + */ + +/* + * set_bit - Atomically set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * This function is atomic and may not be reordered. See __set_bit() + * if you do not require the atomic guarantees. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static __inline__ void +set_bit(int nr, volatile void *addr) +{ + unsigned long *m = ((unsigned long *) addr) + (nr >> 5); + unsigned long temp; + + __asm__ __volatile__( + "1:\tll\t%0, %1\t\t# set_bit\n\t" + "or\t%0, %2\n\t" + "sc\t%0, %1\n\t" + "beqz\t%0, 1b" + : "=&r" (temp), "=m" (*m) + : "ir" (1UL << (nr & 0x1f)), "m" (*m)); +} + +/* + * __set_bit - Set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * Unlike set_bit(), this function is non-atomic and may be reordered. + * If it's called on the same region of memory simultaneously, the effect + * may be that only one operation succeeds. + */ +static __inline__ void __set_bit(int nr, volatile void * addr) +{ + unsigned long * m = ((unsigned long *) addr) + (nr >> 5); + + *m |= 1UL << (nr & 31); +} +#define PLATFORM__SET_BIT + +/* + * clear_bit - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * clear_bit() is atomic and may not be reordered. However, it does + * not contain a memory barrier, so if it is used for locking purposes, + * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * in order to ensure changes are visible on other processors. + */ +static __inline__ void +clear_bit(int nr, volatile void *addr) +{ + unsigned long *m = ((unsigned long *) addr) + (nr >> 5); + unsigned long temp; + + __asm__ __volatile__( + "1:\tll\t%0, %1\t\t# clear_bit\n\t" + "and\t%0, %2\n\t" + "sc\t%0, %1\n\t" + "beqz\t%0, 1b\n\t" + : "=&r" (temp), "=m" (*m) + : "ir" (~(1UL << (nr & 0x1f))), "m" (*m)); +} + +/* + * change_bit - Toggle a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * change_bit() is atomic and may not be reordered. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static __inline__ void +change_bit(int nr, volatile void *addr) +{ + unsigned long *m = ((unsigned long *) addr) + (nr >> 5); + unsigned long temp; + + __asm__ __volatile__( + "1:\tll\t%0, %1\t\t# change_bit\n\t" + "xor\t%0, %2\n\t" + "sc\t%0, %1\n\t" + "beqz\t%0, 1b" + : "=&r" (temp), "=m" (*m) + : "ir" (1UL << (nr & 0x1f)), "m" (*m)); +} + +/* + * __change_bit - Toggle a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * Unlike change_bit(), this function is non-atomic and may be reordered. + * If it's called on the same region of memory simultaneously, the effect + * may be that only one operation succeeds. + */ +static __inline__ void __change_bit(int nr, volatile void * addr) +{ + unsigned long * m = ((unsigned long *) addr) + (nr >> 5); + + *m ^= 1UL << (nr & 31); +} + +/* + * test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static __inline__ int +test_and_set_bit(int nr, volatile void *addr) +{ + unsigned long *m = ((unsigned long *) addr) + (nr >> 5); + unsigned long temp, res; + + __asm__ __volatile__( + ".set\tnoreorder\t\t# test_and_set_bit\n" + "1:\tll\t%0, %1\n\t" + "or\t%2, %0, %3\n\t" + "sc\t%2, %1\n\t" + "beqz\t%2, 1b\n\t" + " and\t%2, %0, %3\n\t" + ".set\treorder" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "r" (1UL << (nr & 0x1f)), "m" (*m) + : "memory"); + + return res != 0; +} + +/* + * __test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is non-atomic and can be reordered. + * If two examples of this operation race, one can appear to succeed + * but actually fail. You must protect multiple accesses with a lock. + */ +static __inline__ int __test_and_set_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile int *a = addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a |= mask; + + return retval; +} + +/* + * test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static __inline__ int +test_and_clear_bit(int nr, volatile void *addr) +{ + unsigned long *m = ((unsigned long *) addr) + (nr >> 5); + unsigned long temp, res; + + __asm__ __volatile__( + ".set\tnoreorder\t\t# test_and_clear_bit\n" + "1:\tll\t%0, %1\n\t" + "or\t%2, %0, %3\n\t" + "xor\t%2, %3\n\t" + "sc\t%2, %1\n\t" + "beqz\t%2, 1b\n\t" + " and\t%2, %0, %3\n\t" + ".set\treorder" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "r" (1UL << (nr & 0x1f)), "m" (*m) + : "memory"); + + return res != 0; +} + +/* + * __test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is non-atomic and can be reordered. + * If two examples of this operation race, one can appear to succeed + * but actually fail. You must protect multiple accesses with a lock. + */ +static __inline__ int __test_and_clear_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile int *a = addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a &= ~mask; + + return retval; +} + +/* + * test_and_change_bit - Change a bit and return its new value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static __inline__ int +test_and_change_bit(int nr, volatile void *addr) +{ + unsigned long *m = ((unsigned long *) addr) + (nr >> 5); + unsigned long temp, res; + + __asm__ __volatile__( + ".set\tnoreorder\t\t# test_and_change_bit\n" + "1:\tll\t%0, %1\n\t" + "xor\t%2, %0, %3\n\t" + "sc\t%2, %1\n\t" + "beqz\t%2, 1b\n\t" + " and\t%2, %0, %3\n\t" + ".set\treorder" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "r" (1UL << (nr & 0x1f)), "m" (*m) + : "memory"); + + return res != 0; +} + +/* + * __test_and_change_bit - Change a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is non-atomic and can be reordered. + * If two examples of this operation race, one can appear to succeed + * but actually fail. You must protect multiple accesses with a lock. + */ +static __inline__ int __test_and_change_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile int *a = addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a ^= mask; + + return retval; +} + +#else /* MIPS I */ + +/* + * set_bit - Atomically set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * This function is atomic and may not be reordered. See __set_bit() + * if you do not require the atomic guarantees. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static __inline__ void set_bit(int nr, volatile void * addr) +{ + int mask; + volatile int *a = addr; + __bi_flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + __bi_save_and_cli(flags); + *a |= mask; + __bi_restore_flags(flags); +} + +/* + * __set_bit - Set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * Unlike set_bit(), this function is non-atomic and may be reordered. + * If it's called on the same region of memory simultaneously, the effect + * may be that only one operation succeeds. + */ +static __inline__ void __set_bit(int nr, volatile void * addr) +{ + int mask; + volatile int *a = addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + *a |= mask; +} + +/* + * clear_bit - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * clear_bit() is atomic and may not be reordered. However, it does + * not contain a memory barrier, so if it is used for locking purposes, + * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * in order to ensure changes are visible on other processors. + */ +static __inline__ void clear_bit(int nr, volatile void * addr) +{ + int mask; + volatile int *a = addr; + __bi_flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + __bi_save_and_cli(flags); + *a &= ~mask; + __bi_restore_flags(flags); +} + +/* + * change_bit - Toggle a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * change_bit() is atomic and may not be reordered. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static __inline__ void change_bit(int nr, volatile void * addr) +{ + int mask; + volatile int *a = addr; + __bi_flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + __bi_save_and_cli(flags); + *a ^= mask; + __bi_restore_flags(flags); +} + +/* + * __change_bit - Toggle a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * Unlike change_bit(), this function is non-atomic and may be reordered. + * If it's called on the same region of memory simultaneously, the effect + * may be that only one operation succeeds. + */ +static __inline__ void __change_bit(int nr, volatile void * addr) +{ + unsigned long * m = ((unsigned long *) addr) + (nr >> 5); + + *m ^= 1UL << (nr & 31); +} + +/* + * test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static __inline__ int test_and_set_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile int *a = addr; + __bi_flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + __bi_save_and_cli(flags); + retval = (mask & *a) != 0; + *a |= mask; + __bi_restore_flags(flags); + + return retval; +} + +/* + * __test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is non-atomic and can be reordered. + * If two examples of this operation race, one can appear to succeed + * but actually fail. You must protect multiple accesses with a lock. + */ +static __inline__ int __test_and_set_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile int *a = addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a |= mask; + + return retval; +} + +/* + * test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static __inline__ int test_and_clear_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile int *a = addr; + __bi_flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + __bi_save_and_cli(flags); + retval = (mask & *a) != 0; + *a &= ~mask; + __bi_restore_flags(flags); + + return retval; +} + +/* + * __test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is non-atomic and can be reordered. + * If two examples of this operation race, one can appear to succeed + * but actually fail. You must protect multiple accesses with a lock. + */ +static __inline__ int __test_and_clear_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile int *a = addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a &= ~mask; + + return retval; +} + +/* + * test_and_change_bit - Change a bit and return its new value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static __inline__ int test_and_change_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile int *a = addr; + __bi_flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + __bi_save_and_cli(flags); + retval = (mask & *a) != 0; + *a ^= mask; + __bi_restore_flags(flags); + + return retval; +} + +/* + * __test_and_change_bit - Change a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is non-atomic and can be reordered. + * If two examples of this operation race, one can appear to succeed + * but actually fail. You must protect multiple accesses with a lock. + */ +static __inline__ int __test_and_change_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile int *a = addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a ^= mask; + + return retval; +} + +#undef __bi_flags +#undef __bi_cli +#undef __bi_save_flags +#undef __bi_restore_flags + +#endif /* MIPS I */ + +/* + * test_bit - Determine whether a bit is set + * @nr: bit number to test + * @addr: Address to start counting from + */ +static __inline__ int test_bit(int nr, volatile void *addr) +{ + return ((1UL << (nr & 31)) & (((const unsigned int *) addr)[nr >> 5])) != 0; +} + +#ifndef __MIPSEB__ + +/* Little endian versions. */ + +/* + * find_first_zero_bit - find the first zero bit in a memory region + * @addr: The address to start the search at + * @size: The maximum size to search + * + * Returns the bit-number of the first zero bit, not the number of the byte + * containing a bit. + */ +static __inline__ int find_first_zero_bit (void *addr, unsigned size) +{ + unsigned long dummy; + int res; + + if (!size) + return 0; + + __asm__ (".set\tnoreorder\n\t" + ".set\tnoat\n" + "1:\tsubu\t$1,%6,%0\n\t" + "blez\t$1,2f\n\t" + "lw\t$1,(%5)\n\t" + "addiu\t%5,4\n\t" +#if (_MIPS_ISA == _MIPS_ISA_MIPS2 ) || (_MIPS_ISA == _MIPS_ISA_MIPS3 ) || \ + (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5 ) || \ + (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64) + "beql\t%1,$1,1b\n\t" + "addiu\t%0,32\n\t" +#else + "addiu\t%0,32\n\t" + "beq\t%1,$1,1b\n\t" + "nop\n\t" + "subu\t%0,32\n\t" +#endif +#ifdef __MIPSEB__ +#error "Fix this for big endian" +#endif /* __MIPSEB__ */ + "li\t%1,1\n" + "1:\tand\t%2,$1,%1\n\t" + "beqz\t%2,2f\n\t" + "sll\t%1,%1,1\n\t" + "bnez\t%1,1b\n\t" + "add\t%0,%0,1\n\t" + ".set\tat\n\t" + ".set\treorder\n" + "2:" + : "=r" (res), "=r" (dummy), "=r" (addr) + : "0" ((signed int) 0), "1" ((unsigned int) 0xffffffff), + "2" (addr), "r" (size) + : "$1"); + + return res; +} + +/* + * find_next_zero_bit - find the first zero bit in a memory region + * @addr: The address to base the search on + * @offset: The bitnumber to start searching at + * @size: The maximum size to search + */ +static __inline__ int find_next_zero_bit (void * addr, int size, int offset) +{ + unsigned int *p = ((unsigned int *) addr) + (offset >> 5); + int set = 0, bit = offset & 31, res; + unsigned long dummy; + + if (bit) { + /* + * Look for zero in first byte + */ +#ifdef __MIPSEB__ +#error "Fix this for big endian byte order" +#endif + __asm__(".set\tnoreorder\n\t" + ".set\tnoat\n" + "1:\tand\t$1,%4,%1\n\t" + "beqz\t$1,1f\n\t" + "sll\t%1,%1,1\n\t" + "bnez\t%1,1b\n\t" + "addiu\t%0,1\n\t" + ".set\tat\n\t" + ".set\treorder\n" + "1:" + : "=r" (set), "=r" (dummy) + : "0" (0), "1" (1 << bit), "r" (*p) + : "$1"); + if (set < (32 - bit)) + return set + offset; + set = 32 - bit; + p++; + } + /* + * No zero yet, search remaining full bytes for a zero + */ + res = find_first_zero_bit(p, size - 32 * (p - (unsigned int *) addr)); + return offset + set + res; +} + +#endif /* !(__MIPSEB__) */ + +/* + * ffz - find first zero in word. + * @word: The word to search + * + * Undefined if no zero exists, so code should check against ~0UL first. + */ +static __inline__ unsigned long ffz(unsigned long word) +{ + unsigned int __res; + unsigned int mask = 1; + + __asm__ ( + ".set\tnoreorder\n\t" + ".set\tnoat\n\t" + "move\t%0,$0\n" + "1:\tand\t$1,%2,%1\n\t" + "beqz\t$1,2f\n\t" + "sll\t%1,1\n\t" + "bnez\t%1,1b\n\t" + "addiu\t%0,1\n\t" + ".set\tat\n\t" + ".set\treorder\n" + "2:\n\t" + : "=&r" (__res), "=r" (mask) + : "r" (word), "1" (mask) + : "$1"); + + return __res; +} + +#ifdef __KERNEL__ + +/* + * hweightN - returns the hamming weight of a N-bit word + * @x: the word to weigh + * + * The Hamming Weight of a number is the total number of bits set in it. + */ + +#define hweight32(x) generic_hweight32(x) +#define hweight16(x) generic_hweight16(x) +#define hweight8(x) generic_hweight8(x) + +#endif /* __KERNEL__ */ + +#ifdef __MIPSEB__ +/* + * find_next_zero_bit - find the first zero bit in a memory region + * @addr: The address to base the search on + * @offset: The bitnumber to start searching at + * @size: The maximum size to search + */ +static __inline__ int find_next_zero_bit(void *addr, int size, int offset) +{ + unsigned long *p = ((unsigned long *) addr) + (offset >> 5); + unsigned long result = offset & ~31UL; + unsigned long tmp; + + if (offset >= size) + return size; + size -= result; + offset &= 31UL; + if (offset) { + tmp = *(p++); + tmp |= ~0UL >> (32-offset); + if (size < 32) + goto found_first; + if (~tmp) + goto found_middle; + size -= 32; + result += 32; + } + while (size & ~31UL) { + if (~(tmp = *(p++))) + goto found_middle; + result += 32; + size -= 32; + } + if (!size) + return result; + tmp = *p; + +found_first: + tmp |= ~0UL << size; +found_middle: + return result + ffz(tmp); +} + +/* Linus sez that gcc can optimize the following correctly, we'll see if this + * holds on the Sparc as it does for the ALPHA. + */ + +#if 0 /* Fool kernel-doc since it doesn't do macros yet */ +/* + * find_first_zero_bit - find the first zero bit in a memory region + * @addr: The address to start the search at + * @size: The maximum size to search + * + * Returns the bit-number of the first zero bit, not the number of the byte + * containing a bit. + */ +static int find_first_zero_bit (void *addr, unsigned size); +#endif + +#define find_first_zero_bit(addr, size) \ + find_next_zero_bit((addr), (size), 0) + +#endif /* (__MIPSEB__) */ + +/* Now for the ext2 filesystem bit operations and helper routines. */ + +#ifdef __MIPSEB__ +static __inline__ int ext2_set_bit(int nr, void * addr) +{ + int mask, retval, flags; + unsigned char *ADDR = (unsigned char *) addr; + + ADDR += nr >> 3; + mask = 1 << (nr & 0x07); + save_and_cli(flags); + retval = (mask & *ADDR) != 0; + *ADDR |= mask; + restore_flags(flags); + return retval; +} + +static __inline__ int ext2_clear_bit(int nr, void * addr) +{ + int mask, retval, flags; + unsigned char *ADDR = (unsigned char *) addr; + + ADDR += nr >> 3; + mask = 1 << (nr & 0x07); + save_and_cli(flags); + retval = (mask & *ADDR) != 0; + *ADDR &= ~mask; + restore_flags(flags); + return retval; +} + +static __inline__ int ext2_test_bit(int nr, const void * addr) +{ + int mask; + const unsigned char *ADDR = (const unsigned char *) addr; + + ADDR += nr >> 3; + mask = 1 << (nr & 0x07); + return ((mask & *ADDR) != 0); +} + +#define ext2_find_first_zero_bit(addr, size) \ + ext2_find_next_zero_bit((addr), (size), 0) + +static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset) +{ + unsigned long *p = ((unsigned long *) addr) + (offset >> 5); + unsigned long result = offset & ~31UL; + unsigned long tmp; + + if (offset >= size) + return size; + size -= result; + offset &= 31UL; + if(offset) { + /* We hold the little endian value in tmp, but then the + * shift is illegal. So we could keep a big endian value + * in tmp, like this: + * + * tmp = __swab32(*(p++)); + * tmp |= ~0UL >> (32-offset); + * + * but this would decrease preformance, so we change the + * shift: + */ + tmp = *(p++); + tmp |= __swab32(~0UL >> (32-offset)); + if(size < 32) + goto found_first; + if(~tmp) + goto found_middle; + size -= 32; + result += 32; + } + while(size & ~31UL) { + if(~(tmp = *(p++))) + goto found_middle; + result += 32; + size -= 32; + } + if(!size) + return result; + tmp = *p; + +found_first: + /* tmp is little endian, so we would have to swab the shift, + * see above. But then we have to swab tmp below for ffz, so + * we might as well do this here. + */ + return result + ffz(__swab32(tmp) | (~0UL << size)); +found_middle: + return result + ffz(__swab32(tmp)); +} +#else /* !(__MIPSEB__) */ + +/* Native ext2 byte ordering, just collapse using defines. */ +#define ext2_set_bit(nr, addr) test_and_set_bit((nr), (addr)) +#define ext2_clear_bit(nr, addr) test_and_clear_bit((nr), (addr)) +#define ext2_test_bit(nr, addr) test_bit((nr), (addr)) +#define ext2_find_first_zero_bit(addr, size) find_first_zero_bit((addr), (size)) +#define ext2_find_next_zero_bit(addr, size, offset) \ + find_next_zero_bit((addr), (size), (offset)) + +#endif /* !(__MIPSEB__) */ + +/* + * Bitmap functions for the minix filesystem. + * FIXME: These assume that Minix uses the native byte/bitorder. + * This limits the Minix filesystem's value for data exchange very much. + */ +#define minix_test_and_set_bit(nr,addr) test_and_set_bit(nr,addr) +#define minix_set_bit(nr,addr) set_bit(nr,addr) +#define minix_test_and_clear_bit(nr,addr) test_and_clear_bit(nr,addr) +#define minix_test_bit(nr,addr) test_bit(nr,addr) +#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size) + +#endif /* _ASM_BITOPS_H */ diff --git a/arch/mips/include/asm/byteorder.h b/arch/mips/include/asm/byteorder.h new file mode 100644 index 0000000000..b5e685feb6 --- /dev/null +++ b/arch/mips/include/asm/byteorder.h @@ -0,0 +1,75 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 99, 2003 by Ralf Baechle + */ +#ifndef _ASM_BYTEORDER_H +#define _ASM_BYTEORDER_H + +#include <asm/types.h> + +#ifdef __GNUC__ + +#ifdef CONFIG_CPU_MIPSR2 + +static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x) +{ + __asm__( + " wsbh %0, %1 \n" + : "=r" (x) + : "r" (x)); + + return x; +} +#define __arch__swab16(x) ___arch__swab16(x) + +static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x) +{ + __asm__( + " wsbh %0, %1 \n" + " rotr %0, %0, 16 \n" + : "=r" (x) + : "r" (x)); + + return x; +} +#define __arch__swab32(x) ___arch__swab32(x) + +#ifdef CONFIG_CPU_MIPS64_R2 + +static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x) +{ + __asm__( + " dsbh %0, %1 \n" + " dshd %0, %0 \n" + " drotr %0, %0, 32 \n" + : "=r" (x) + : "r" (x)); + + return x; +} + +#define __arch__swab64(x) ___arch__swab64(x) + +#endif /* CONFIG_CPU_MIPS64_R2 */ + +#endif /* CONFIG_CPU_MIPSR2 */ + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#endif /* __GNUC__ */ + +#if defined(__MIPSEB__) +# include <linux/byteorder/big_endian.h> +#elif defined(__MIPSEL__) +# include <linux/byteorder/little_endian.h> +#else +# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???" +#endif + +#endif /* _ASM_BYTEORDER_H */ diff --git a/arch/mips/include/asm/cachectl.h b/arch/mips/include/asm/cachectl.h new file mode 100644 index 0000000000..f3ce721861 --- /dev/null +++ b/arch/mips/include/asm/cachectl.h @@ -0,0 +1,26 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995, 1996 by Ralf Baechle + */ +#ifndef _ASM_CACHECTL +#define _ASM_CACHECTL + +/* + * Options for cacheflush system call + */ +#define ICACHE (1<<0) /* flush instruction cache */ +#define DCACHE (1<<1) /* writeback and flush data cache */ +#define BCACHE (ICACHE|DCACHE) /* flush both caches */ + +/* + * Caching modes for the cachectl(2) call + * + * cachectl(2) is currently not supported and returns ENOSYS. + */ +#define CACHEABLE 0 /* make pages cacheable */ +#define UNCACHEABLE 1 /* make pages uncacheable */ + +#endif /* _ASM_CACHECTL */ diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h new file mode 100644 index 0000000000..70bcad7694 --- /dev/null +++ b/arch/mips/include/asm/cacheops.h @@ -0,0 +1,85 @@ +/* + * Cache operations for the cache instruction. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle + * (C) Copyright 1999 Silicon Graphics, Inc. + */ +#ifndef __ASM_CACHEOPS_H +#define __ASM_CACHEOPS_H + +/* + * Cache Operations available on all MIPS processors with R4000-style caches + */ +#define Index_Invalidate_I 0x00 +#define Index_Writeback_Inv_D 0x01 +#define Index_Load_Tag_I 0x04 +#define Index_Load_Tag_D 0x05 +#define Index_Store_Tag_I 0x08 +#define Index_Store_Tag_D 0x09 +#if defined(CONFIG_CPU_LOONGSON2) +#define Hit_Invalidate_I 0x00 +#else +#define Hit_Invalidate_I 0x10 +#endif +#define Hit_Invalidate_D 0x11 +#define Hit_Writeback_Inv_D 0x15 + +/* + * R4000-specific cacheops + */ +#define Create_Dirty_Excl_D 0x0d +#define Fill 0x14 +#define Hit_Writeback_I 0x18 +#define Hit_Writeback_D 0x19 + +/* + * R4000SC and R4400SC-specific cacheops + */ +#define Index_Invalidate_SI 0x02 +#define Index_Writeback_Inv_SD 0x03 +#define Index_Load_Tag_SI 0x06 +#define Index_Load_Tag_SD 0x07 +#define Index_Store_Tag_SI 0x0A +#define Index_Store_Tag_SD 0x0B +#define Create_Dirty_Excl_SD 0x0f +#define Hit_Invalidate_SI 0x12 +#define Hit_Invalidate_SD 0x13 +#define Hit_Writeback_Inv_SD 0x17 +#define Hit_Writeback_SD 0x1b +#define Hit_Set_Virtual_SI 0x1e +#define Hit_Set_Virtual_SD 0x1f + +/* + * R5000-specific cacheops + */ +#define R5K_Page_Invalidate_S 0x17 + +/* + * RM7000-specific cacheops + */ +#define Page_Invalidate_T 0x16 + +/* + * R10000-specific cacheops + * + * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused. + * Most of the _S cacheops are identical to the R4000SC _SD cacheops. + */ +#define Index_Writeback_Inv_S 0x03 +#define Index_Load_Tag_S 0x07 +#define Index_Store_Tag_S 0x0B +#define Hit_Invalidate_S 0x13 +#define Cache_Barrier 0x14 +#define Hit_Writeback_Inv_S 0x17 +#define Index_Load_Data_I 0x18 +#define Index_Load_Data_D 0x19 +#define Index_Load_Data_S 0x1b +#define Index_Store_Data_I 0x1c +#define Index_Store_Data_D 0x1d +#define Index_Store_Data_S 0x1f + +#endif /* __ASM_CACHEOPS_H */ diff --git a/arch/mips/include/asm/config.h b/arch/mips/include/asm/config.h new file mode 100644 index 0000000000..049c44eaf8 --- /dev/null +++ b/arch/mips/include/asm/config.h @@ -0,0 +1,24 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef _ASM_CONFIG_H_ +#define _ASM_CONFIG_H_ + +#endif diff --git a/arch/mips/include/asm/errno.h b/arch/mips/include/asm/errno.h new file mode 100644 index 0000000000..1665a63a81 --- /dev/null +++ b/arch/mips/include/asm/errno.h @@ -0,0 +1,143 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1999, 2001, 2002 by Ralf Baechle + */ +#ifndef _ASM_MIPS_ERRNO_H +#define _ASM_MIPS_ERRNO_H + +/* + * These first 34 error codes are from Linux 2.6, <asm-generic/errno-base.h> + */ +#define EPERM 1 /* Operation not permitted */ +#define ENOENT 2 /* No such file or directory */ +#define ESRCH 3 /* No such process */ +#define EINTR 4 /* Interrupted system call */ +#define EIO 5 /* I/O error */ +#define ENXIO 6 /* No such device or address */ +#define E2BIG 7 /* Argument list too long */ +#define ENOEXEC 8 /* Exec format error */ +#define EBADF 9 /* Bad file number */ +#define ECHILD 10 /* No child processes */ +#define EAGAIN 11 /* Try again */ +#define ENOMEM 12 /* Out of memory */ +#define EACCES 13 /* Permission denied */ +#define EFAULT 14 /* Bad address */ +#define ENOTBLK 15 /* Block device required */ +#define EBUSY 16 /* Device or resource busy */ +#define EEXIST 17 /* File exists */ +#define EXDEV 18 /* Cross-device link */ +#define ENODEV 19 /* No such device */ +#define ENOTDIR 20 /* Not a directory */ +#define EISDIR 21 /* Is a directory */ +#define EINVAL 22 /* Invalid argument */ +#define ENFILE 23 /* File table overflow */ +#define EMFILE 24 /* Too many open files */ +#define ENOTTY 25 /* Not a typewriter */ +#define ETXTBSY 26 /* Text file busy */ +#define EFBIG 27 /* File too large */ +#define ENOSPC 28 /* No space left on device */ +#define ESPIPE 29 /* Illegal seek */ +#define EROFS 30 /* Read-only file system */ +#define EMLINK 31 /* Too many links */ +#define EPIPE 32 /* Broken pipe */ +#define EDOM 33 /* Math argument out of domain of func */ +#define ERANGE 34 /* Math result not representable */ + +/* + * These error numbers are intended to be MIPS ABI compatible + */ +#define ENOMSG 35 /* No message of desired type */ +#define EIDRM 36 /* Identifier removed */ +#define ECHRNG 37 /* Channel number out of range */ +#define EL2NSYNC 38 /* Level 2 not synchronized */ +#define EL3HLT 39 /* Level 3 halted */ +#define EL3RST 40 /* Level 3 reset */ +#define ELNRNG 41 /* Link number out of range */ +#define EUNATCH 42 /* Protocol driver not attached */ +#define ENOCSI 43 /* No CSI structure available */ +#define EL2HLT 44 /* Level 2 halted */ +#define EDEADLK 45 /* Resource deadlock would occur */ +#define ENOLCK 46 /* No record locks available */ +#define EBADE 50 /* Invalid exchange */ +#define EBADR 51 /* Invalid request descriptor */ +#define EXFULL 52 /* Exchange full */ +#define ENOANO 53 /* No anode */ +#define EBADRQC 54 /* Invalid request code */ +#define EBADSLT 55 /* Invalid slot */ +#define EDEADLOCK 56 /* File locking deadlock error */ +#define EBFONT 59 /* Bad font file format */ +#define ENOSTR 60 /* Device not a stream */ +#define ENODATA 61 /* No data available */ +#define ETIME 62 /* Timer expired */ +#define ENOSR 63 /* Out of streams resources */ +#define ENONET 64 /* Machine is not on the network */ +#define ENOPKG 65 /* Package not installed */ +#define EREMOTE 66 /* Object is remote */ +#define ENOLINK 67 /* Link has been severed */ +#define EADV 68 /* Advertise error */ +#define ESRMNT 69 /* Srmount error */ +#define ECOMM 70 /* Communication error on send */ +#define EPROTO 71 /* Protocol error */ +#define EDOTDOT 73 /* RFS specific error */ +#define EMULTIHOP 74 /* Multihop attempted */ +#define EBADMSG 77 /* Not a data message */ +#define ENAMETOOLONG 78 /* File name too long */ +#define EOVERFLOW 79 /* Value too large for defined data type */ +#define ENOTUNIQ 80 /* Name not unique on network */ +#define EBADFD 81 /* File descriptor in bad state */ +#define EREMCHG 82 /* Remote address changed */ +#define ELIBACC 83 /* Can not access a needed shared library */ +#define ELIBBAD 84 /* Accessing a corrupted shared library */ +#define ELIBSCN 85 /* .lib section in a.out corrupted */ +#define ELIBMAX 86 /* Attempting to link in too many shared libraries */ +#define ELIBEXEC 87 /* Cannot exec a shared library directly */ +#define EILSEQ 88 /* Illegal byte sequence */ +#define ENOSYS 89 /* Function not implemented */ +#define ELOOP 90 /* Too many symbolic links encountered */ +#define ERESTART 91 /* Interrupted system call should be restarted */ +#define ESTRPIPE 92 /* Streams pipe error */ +#define ENOTEMPTY 93 /* Directory not empty */ +#define EUSERS 94 /* Too many users */ +#define ENOTSOCK 95 /* Socket operation on non-socket */ +#define EDESTADDRREQ 96 /* Destination address required */ +#define EMSGSIZE 97 /* Message too long */ +#define EPROTOTYPE 98 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 99 /* Protocol not available */ +#define EPROTONOSUPPORT 120 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 121 /* Socket type not supported */ +#define EOPNOTSUPP 122 /* Operation not supported on transport endpoint */ +#define EPFNOSUPPORT 123 /* Protocol family not supported */ +#define EAFNOSUPPORT 124 /* Address family not supported by protocol */ +#define EADDRINUSE 125 /* Address already in use */ +#define EADDRNOTAVAIL 126 /* Cannot assign requested address */ +#define ENETDOWN 127 /* Network is down */ +#define ENETUNREACH 128 /* Network is unreachable */ +#define ENETRESET 129 /* Network dropped connection because of reset */ +#define ECONNABORTED 130 /* Software caused connection abort */ +#define ECONNRESET 131 /* Connection reset by peer */ +#define ENOBUFS 132 /* No buffer space available */ +#define EISCONN 133 /* Transport endpoint is already connected */ +#define ENOTCONN 134 /* Transport endpoint is not connected */ +#define EUCLEAN 135 /* Structure needs cleaning */ +#define ENOTNAM 137 /* Not a XENIX named type file */ +#define ENAVAIL 138 /* No XENIX semaphores available */ +#define EISNAM 139 /* Is a named type file */ +#define EREMOTEIO 140 /* Remote I/O error */ +#define EINIT 141 /* Reserved */ +#define EREMDEV 142 /* Error 142 */ +#define ESHUTDOWN 143 /* Cannot send after transport endpoint shutdown */ +#define ETOOMANYREFS 144 /* Too many references: cannot splice */ +#define ETIMEDOUT 145 /* Connection timed out */ +#define ECONNREFUSED 146 /* Connection refused */ +#define EHOSTDOWN 147 /* Host is down */ +#define EHOSTUNREACH 148 /* No route to host */ +#define EWOULDBLOCK EAGAIN /* Operation would block */ +#define EALREADY 149 /* Operation already in progress */ +#define EINPROGRESS 150 /* Operation now in progress */ +#define ESTALE 151 /* Stale NFS file handle */ +#define ECANCELED 158 /* AIO operation canceled */ + +#endif /* _ASM_MIPS_ERRNO_H */ diff --git a/arch/mips/include/asm/global_data.h b/arch/mips/include/asm/global_data.h new file mode 100644 index 0000000000..b2c4891151 --- /dev/null +++ b/arch/mips/include/asm/global_data.h @@ -0,0 +1,64 @@ +/* + * (C) Copyright 2002-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_GBL_DATA_H +#define __ASM_GBL_DATA_H + +#include <asm/regdef.h> + +/* + * The following data structure is placed in some memory wich is + * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or + * some locked parts of the data cache) to allow for a minimum set of + * global variables during system initialization (until we have set + * up the memory controller so that we can use RAM). + * + * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t) + */ + +typedef struct global_data { + bd_t *bd; + unsigned long flags; + unsigned long baudrate; + unsigned long have_console; /* serial_init() was called */ + phys_size_t ram_size; /* RAM size */ + unsigned long reloc_off; /* Relocation Offset */ + unsigned long env_addr; /* Address of Environment struct */ + unsigned long env_valid; /* Checksum of Environment valid? */ + void **jt; /* jump table */ +} gd_t; + +/* + * Global Data Flags + */ +#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */ +#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ +#define GD_FLG_SILENT 0x00004 /* Silent mode */ +#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */ +#define GD_FLG_POSTSTOP 0x00010 /* POST seqeunce aborted */ +#define GD_FLG_LOGINIT 0x00020 /* Log Buf has been initialized */ +#define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */ + +#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("k0") + +#endif /* __ASM_GBL_DATA_H */ diff --git a/arch/mips/include/asm/inca-ip.h b/arch/mips/include/asm/inca-ip.h new file mode 100644 index 0000000000..e787a1dee6 --- /dev/null +++ b/arch/mips/include/asm/inca-ip.h @@ -0,0 +1,2441 @@ + +/****************************************************************************** + Copyright (c) 2002, Infineon Technologies. All rights reserved. + + No Warranty + Because the program is licensed free of charge, there is no warranty for + the program, to the extent permitted by applicable law. Except when + otherwise stated in writing the copyright holders and/or other parties + provide the program "as is" without warranty of any kind, either + expressed or implied, including, but not limited to, the implied + warranties of merchantability and fitness for a particular purpose. The + entire risk as to the quality and performance of the program is with + you. should the program prove defective, you assume the cost of all + necessary servicing, repair or correction. + + In no event unless required by applicable law or agreed to in writing + will any copyright holder, or any other party who may modify and/or + redistribute the program as permitted above, be liable to you for + damages, including any general, special, incidental or consequential + damages arising out of the use or inability to use the program + (including but not limited to loss of data or data being rendered + inaccurate or losses sustained by you or third parties or a failure of + the program to operate with any other programs), even if such holder or + other party has been advised of the possibility of such damages. +******************************************************************************/ + + +/***********************************************************************/ +/* Module : WDT register address and bits */ +/***********************************************************************/ + +#define INCA_IP_WDT (0xB8000000) +/***********************************************************************/ + + +/***Reset Status Register Power On***/ +#define INCA_IP_WDT_RST_SR ((volatile u32*)(INCA_IP_WDT+ 0x0014)) + +/***Reset Request Register***/ +#define INCA_IP_WDT_RST_REQ ((volatile u32*)(INCA_IP_WDT+ 0x0010)) +#define INCA_IP_WDT_RST_REQ_SWBOOT (1 << 24) +#define INCA_IP_WDT_RST_REQ_SWCFG (1 << 16) +#define INCA_IP_WDT_RST_REQ_RRPHY (1 << 5) +#define INCA_IP_WDT_RST_REQ_RRHSP (1 << 4) +#define INCA_IP_WDT_RST_REQ_RRFPI (1 << 3) +#define INCA_IP_WDT_RST_REQ_RREXT (1 << 2) +#define INCA_IP_WDT_RST_REQ_RRDSP (1 << 1) +#define INCA_IP_WDT_RST_REQ_RRCPU (1 << 0) + +/***NMI Status Register***/ +#define INCA_IP_WDT_NMISR ((volatile u32*)(INCA_IP_WDT+ 0x002C)) +#define INCA_IP_WDT_NMISR_NMIWDT (1 << 2) +#define INCA_IP_WDT_NMISR_NMIPLL (1 << 1) +#define INCA_IP_WDT_NMISR_NMIEXT (1 << 0) + +/***Manufacturer Identification Register***/ +#define INCA_IP_WDT_MANID ((volatile u32*)(INCA_IP_WDT+ 0x0070)) +#define INCA_IP_WDT_MANID_MANUF (value) (((( 1 << 11) - 1) & (value)) << 5) + +/***Chip Identification Register***/ +#define INCA_IP_WDT_CHIPID ((volatile u32*)(INCA_IP_WDT+ 0x0074)) +#define INCA_IP_WDT_CHIPID_VERSION (value) (((( 1 << 4) - 1) & (value)) << 28) +#define INCA_IP_WDT_CHIPID_PART_NUMBER (value) (((( 1 << 16) - 1) & (value)) << 12) +#define INCA_IP_WDT_CHIPID_MANID (value) (((( 1 << 11) - 1) & (value)) << 1) + +/***Redesign Tracing Identification Register***/ +#define INCA_IP_WDT_RTID ((volatile u32*)(INCA_IP_WDT+ 0x0078)) +#define INCA_IP_WDT_RTID_LC (1 << 15) +#define INCA_IP_WDT_RTID_RIX (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***Watchdog Timer Control Register 0***/ +#define INCA_IP_WDT_WDT_CON0 ((volatile u32*)(INCA_IP_WDT+ 0x0020)) + +/***Watchdog Timer Control Register 1***/ +#define INCA_IP_WDT_WDT_CON1 ((volatile u32*)(INCA_IP_WDT+ 0x0024)) +#define INCA_IP_WDT_WDT_CON1_WDTDR (1 << 3) +#define INCA_IP_WDT_WDT_CON1_WDTIR (1 << 2) + +/***Watchdog Timer Status Register***/ +#define INCA_IP_WDT_WDT_SR ((volatile u32*)(INCA_IP_WDT+ 0x0028)) +#define INCA_IP_WDT_WDT_SR_WDTTIM (value) (((( 1 << 16) - 1) & (value)) << 16) +#define INCA_IP_WDT_WDT_SR_WDTPR (1 << 5) +#define INCA_IP_WDT_WDT_SR_WDTTO (1 << 4) +#define INCA_IP_WDT_WDT_SR_WDTDS (1 << 3) +#define INCA_IP_WDT_WDT_SR_WDTIS (1 << 2) +#define INCA_IP_WDT_WDT_SR_WDTOE (1 << 1) +#define INCA_IP_WDT_WDT_SR_WDTAE (1 << 0) + +/***********************************************************************/ +/* Module : CGU register address and bits */ +/***********************************************************************/ + +#define INCA_IP_CGU (0xBF107000) +/***********************************************************************/ + + +/***CGU PLL1 Control Register***/ +#define INCA_IP_CGU_CGU_PLL1CR ((volatile u32*)(INCA_IP_CGU+ 0x0008)) +#define INCA_IP_CGU_CGU_PLL1CR_SWRST (1 << 31) +#define INCA_IP_CGU_CGU_PLL1CR_EN (1 << 30) +#define INCA_IP_CGU_CGU_PLL1CR_NDIV (value) (((( 1 << 6) - 1) & (value)) << 16) +#define INCA_IP_CGU_CGU_PLL1CR_MDIV (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***CGU PLL0 Control Register***/ +#define INCA_IP_CGU_CGU_PLL0CR ((volatile u32*)(INCA_IP_CGU+ 0x0000)) +#define INCA_IP_CGU_CGU_PLL0CR_SWRST (1 << 31) +#define INCA_IP_CGU_CGU_PLL0CR_EN (1 << 30) +#define INCA_IP_CGU_CGU_PLL0CR_NDIV (value) (((( 1 << 6) - 1) & (value)) << 16) +#define INCA_IP_CGU_CGU_PLL0CR_MDIV (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***CGU PLL0 Status Register***/ +#define INCA_IP_CGU_CGU_PLL0SR ((volatile u32*)(INCA_IP_CGU+ 0x0004)) +#define INCA_IP_CGU_CGU_PLL0SR_LOCK (1 << 31) +#define INCA_IP_CGU_CGU_PLL0SR_RCF (1 << 29) +#define INCA_IP_CGU_CGU_PLL0SR_PLLBYP (1 << 15) + +/***CGU PLL1 Status Register***/ +#define INCA_IP_CGU_CGU_PLL1SR ((volatile u32*)(INCA_IP_CGU+ 0x000C)) +#define INCA_IP_CGU_CGU_PLL1SR_LOCK (1 << 31) +#define INCA_IP_CGU_CGU_PLL1SR_RCF (1 << 29) +#define INCA_IP_CGU_CGU_PLL1SR_PLLBYP (1 << 15) + +/***CGU Divider Control Register***/ +#define INCA_IP_CGU_CGU_DIVCR ((volatile u32*)(INCA_IP_CGU+ 0x0010)) + +/***CGU Multiplexer Control Register***/ +#define INCA_IP_CGU_CGU_MUXCR ((volatile u32*)(INCA_IP_CGU+ 0x0014)) +#define INCA_IP_CGU_CGU_MUXCR_SWRST (1 << 31) +#define INCA_IP_CGU_CGU_MUXCR_MUXII (1 << 1) +#define INCA_IP_CGU_CGU_MUXCR_MUXI (1 << 0) + +/***CGU Fractional Divider Control Register***/ +#define INCA_IP_CGU_CGU_FDCR ((volatile u32*)(INCA_IP_CGU+ 0x0018)) +#define INCA_IP_CGU_CGU_FDCR_FDEN (1 << 31) +#define INCA_IP_CGU_CGU_FDCR_INTEGER (value) (((( 1 << 12) - 1) & (value)) << 16) +#define INCA_IP_CGU_CGU_FDCR_FRACTION (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***********************************************************************/ +/* Module : PMU register address and bits */ +/***********************************************************************/ + +#define INCA_IP_PMU (0xBF102000) +/***********************************************************************/ + + +/***PM Global Enable Register***/ +#define INCA_IP_PMU_PM_GEN ((volatile u32*)(INCA_IP_PMU+ 0x0000)) +#define INCA_IP_PMU_PM_GEN_EN16 (1 << 16) +#define INCA_IP_PMU_PM_GEN_EN15 (1 << 15) +#define INCA_IP_PMU_PM_GEN_EN14 (1 << 14) +#define INCA_IP_PMU_PM_GEN_EN13 (1 << 13) +#define INCA_IP_PMU_PM_GEN_EN12 (1 << 12) +#define INCA_IP_PMU_PM_GEN_EN11 (1 << 11) +#define INCA_IP_PMU_PM_GEN_EN10 (1 << 10) +#define INCA_IP_PMU_PM_GEN_EN9 (1 << 9) +#define INCA_IP_PMU_PM_GEN_EN8 (1 << 8) +#define INCA_IP_PMU_PM_GEN_EN7 (1 << 7) +#define INCA_IP_PMU_PM_GEN_EN6 (1 << 6) +#define INCA_IP_PMU_PM_GEN_EN5 (1 << 5) +#define INCA_IP_PMU_PM_GEN_EN4 (1 << 4) +#define INCA_IP_PMU_PM_GEN_EN3 (1 << 3) +#define INCA_IP_PMU_PM_GEN_EN2 (1 << 2) +#define INCA_IP_PMU_PM_GEN_EN0 (1 << 0) + +/***PM Power Down Enable Register***/ +#define INCA_IP_PMU_PM_PDEN ((volatile u32*)(INCA_IP_PMU+ 0x0008)) +#define INCA_IP_PMU_PM_PDEN_EN16 (1 << 16) +#define INCA_IP_PMU_PM_PDEN_EN15 (1 << 15) +#define INCA_IP_PMU_PM_PDEN_EN14 (1 << 14) +#define INCA_IP_PMU_PM_PDEN_EN13 (1 << 13) +#define INCA_IP_PMU_PM_PDEN_EN12 (1 << 12) +#define INCA_IP_PMU_PM_PDEN_EN11 (1 << 11) +#define INCA_IP_PMU_PM_PDEN_EN10 (1 << 10) +#define INCA_IP_PMU_PM_PDEN_EN9 (1 << 9) +#define INCA_IP_PMU_PM_PDEN_EN8 (1 << 8) +#define INCA_IP_PMU_PM_PDEN_EN7 (1 << 7) +#define INCA_IP_PMU_PM_PDEN_EN5 (1 << 5) +#define INCA_IP_PMU_PM_PDEN_EN4 (1 << 4) +#define INCA_IP_PMU_PM_PDEN_EN3 (1 << 3) +#define INCA_IP_PMU_PM_PDEN_EN2 (1 << 2) +#define INCA_IP_PMU_PM_PDEN_EN0 (1 << 0) + +/***PM Wake-Up from Power Down Register***/ +#define INCA_IP_PMU_PM_WUP ((volatile u32*)(INCA_IP_PMU+ 0x0010)) +#define INCA_IP_PMU_PM_WUP_WUP16 (1 << 16) +#define INCA_IP_PMU_PM_WUP_WUP15 (1 << 15) +#define INCA_IP_PMU_PM_WUP_WUP14 (1 << 14) +#define INCA_IP_PMU_PM_WUP_WUP13 (1 << 13) +#define INCA_IP_PMU_PM_WUP_WUP12 (1 << 12) +#define INCA_IP_PMU_PM_WUP_WUP11 (1 << 11) +#define INCA_IP_PMU_PM_WUP_WUP10 (1 << 10) +#define INCA_IP_PMU_PM_WUP_WUP9 (1 << 9) +#define INCA_IP_PMU_PM_WUP_WUP8 (1 << 8) +#define INCA_IP_PMU_PM_WUP_WUP7 (1 << 7) +#define INCA_IP_PMU_PM_WUP_WUP5 (1 << 5) +#define INCA_IP_PMU_PM_WUP_WUP4 (1 << 4) +#define INCA_IP_PMU_PM_WUP_WUP3 (1 << 3) +#define INCA_IP_PMU_PM_WUP_WUP2 (1 << 2) +#define INCA_IP_PMU_PM_WUP_WUP0 (1 << 0) + +/***PM Control Register***/ +#define INCA_IP_PMU_PM_CR ((volatile u32*)(INCA_IP_PMU+ 0x0014)) +#define INCA_IP_PMU_PM_CR_AWEN (1 << 31) +#define INCA_IP_PMU_PM_CR_SWRST (1 << 30) +#define INCA_IP_PMU_PM_CR_SWCR (1 << 2) +#define INCA_IP_PMU_PM_CR_CRD (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***********************************************************************/ +/* Module : BCU register address and bits */ +/***********************************************************************/ + +#define INCA_IP_BCU (0xB8000100) +/***********************************************************************/ + + +/***BCU Control Register (0010H)***/ +#define INCA_IP_BCU_BCU_CON ((volatile u32*)(INCA_IP_BCU+ 0x0010)) +#define INCA_IP_BCU_BCU_CON_SPC (value) (((( 1 << 8) - 1) & (value)) << 24) +#define INCA_IP_BCU_BCU_CON_SPE (1 << 19) +#define INCA_IP_BCU_BCU_CON_PSE (1 << 18) +#define INCA_IP_BCU_BCU_CON_DBG (1 << 16) +#define INCA_IP_BCU_BCU_CON_TOUT (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***BCU Error Control Capture Register (0020H)***/ +#define INCA_IP_BCU_BCU_ECON ((volatile u32*)(INCA_IP_BCU+ 0x0020)) +#define INCA_IP_BCU_BCU_ECON_TAG (value) (((( 1 << 4) - 1) & (value)) << 24) +#define INCA_IP_BCU_BCU_ECON_RDN (1 << 23) +#define INCA_IP_BCU_BCU_ECON_WRN (1 << 22) +#define INCA_IP_BCU_BCU_ECON_SVM (1 << 21) +#define INCA_IP_BCU_BCU_ECON_ACK (value) (((( 1 << 2) - 1) & (value)) << 19) +#define INCA_IP_BCU_BCU_ECON_ABT (1 << 18) +#define INCA_IP_BCU_BCU_ECON_RDY (1 << 17) +#define INCA_IP_BCU_BCU_ECON_TOUT (1 << 16) +#define INCA_IP_BCU_BCU_ECON_ERRCNT (value) (((( 1 << 16) - 1) & (value)) << 0) +#define INCA_IP_BCU_BCU_ECON_OPC (value) (((( 1 << 4) - 1) & (value)) << 28) + +/***BCU Error Address Capture Register (0024 H)***/ +#define INCA_IP_BCU_BCU_EADD ((volatile u32*)(INCA_IP_BCU+ 0x0024)) +#define INCA_IP_BCU_BCU_EADD_FPIADR + +/***BCU Error Data Capture Register (0028H)***/ +#define INCA_IP_BCU_BCU_EDAT ((volatile u32*)(INCA_IP_BCU+ 0x0028)) +#define INCA_IP_BCU_BCU_EDAT_FPIDAT + +/***********************************************************************/ +/* Module : MBC register address and bits */ +/***********************************************************************/ + +#define INCA_IP_MBC (0xBF103000) +/***********************************************************************/ + + +/***Mailbox CPU Configuration Register***/ +#define INCA_IP_MBC_MBC_CFG ((volatile u32*)(INCA_IP_MBC+ 0x0080)) +#define INCA_IP_MBC_MBC_CFG_SWAP (value) (((( 1 << 2) - 1) & (value)) << 6) +#define INCA_IP_MBC_MBC_CFG_RES (1 << 5) +#define INCA_IP_MBC_MBC_CFG_FWID (value) (((( 1 << 4) - 1) & (value)) << 1) +#define INCA_IP_MBC_MBC_CFG_SIZE (1 << 0) + +/***Mailbox CPU Interrupt Status Register***/ +#define INCA_IP_MBC_MBC_ISR ((volatile u32*)(INCA_IP_MBC+ 0x0084)) +#define INCA_IP_MBC_MBC_ISR_B3DA (1 << 31) +#define INCA_IP_MBC_MBC_ISR_B2DA (1 << 30) +#define INCA_IP_MBC_MBC_ISR_B1E (1 << 29) +#define INCA_IP_MBC_MBC_ISR_B0E (1 << 28) +#define INCA_IP_MBC_MBC_ISR_WDT (1 << 27) +#define INCA_IP_MBC_MBC_ISR_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) + +/***Mailbox CPU Mask Register***/ +#define INCA_IP_MBC_MBC_MSK ((volatile u32*)(INCA_IP_MBC+ 0x0088)) +#define INCA_IP_MBC_MBC_MSK_B3DA (1 << 31) +#define INCA_IP_MBC_MBC_MSK_B2DA (1 << 30) +#define INCA_IP_MBC_MBC_MSK_B1E (1 << 29) +#define INCA_IP_MBC_MBC_MSK_B0E (1 << 28) +#define INCA_IP_MBC_MBC_MSK_WDT (1 << 27) +#define INCA_IP_MBC_MBC_MSK_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) + +/***Mailbox CPU Mask 01 Register***/ +#define INCA_IP_MBC_MBC_MSK01 ((volatile u32*)(INCA_IP_MBC+ 0x008C)) +#define INCA_IP_MBC_MBC_MSK01_B3DA (1 << 31) +#define INCA_IP_MBC_MBC_MSK01_B2DA (1 << 30) +#define INCA_IP_MBC_MBC_MSK01_B1E (1 << 29) +#define INCA_IP_MBC_MBC_MSK01_B0E (1 << 28) +#define INCA_IP_MBC_MBC_MSK01_WDT (1 << 27) +#define INCA_IP_MBC_MBC_MSK01_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) + +/***Mailbox CPU Mask 10 Register***/ +#define INCA_IP_MBC_MBC_MSK10 ((volatile u32*)(INCA_IP_MBC+ 0x0090)) +#define INCA_IP_MBC_MBC_MSK10_B3DA (1 << 31) +#define INCA_IP_MBC_MBC_MSK10_B2DA (1 << 30) +#define INCA_IP_MBC_MBC_MSK10_B1E (1 << 29) +#define INCA_IP_MBC_MBC_MSK10_B0E (1 << 28) +#define INCA_IP_MBC_MBC_MSK10_WDT (1 << 27) +#define INCA_IP_MBC_MBC_MSK10_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) + +/***Mailbox CPU Short Command Register***/ +#define INCA_IP_MBC_MBC_CMD ((volatile u32*)(INCA_IP_MBC+ 0x0094)) +#define INCA_IP_MBC_MBC_CMD_CS270 (value) (((( 1 << 28) - 1) & (value)) << 0) + +/***Mailbox CPU Input Data of Buffer 0***/ +#define INCA_IP_MBC_MBC_ID0 ((volatile u32*)(INCA_IP_MBC+ 0x0000)) +#define INCA_IP_MBC_MBC_ID0_INDATA + +/***Mailbox CPU Input Data of Buffer 1***/ +#define INCA_IP_MBC_MBC_ID1 ((volatile u32*)(INCA_IP_MBC+ 0x0020)) +#define INCA_IP_MBC_MBC_ID1_INDATA + +/***Mailbox CPU Output Data of Buffer 2***/ +#define INCA_IP_MBC_MBC_OD2 ((volatile u32*)(INCA_IP_MBC+ 0x0040)) +#define INCA_IP_MBC_MBC_OD2_OUTDATA + +/***Mailbox CPU Output Data of Buffer 3***/ +#define INCA_IP_MBC_MBC_OD3 ((volatile u32*)(INCA_IP_MBC+ 0x0060)) +#define INCA_IP_MBC_MBC_OD3_OUTDATA + +/***Mailbox CPU Control Register of Buffer 0***/ +#define INCA_IP_MBC_MBC_CR0 ((volatile u32*)(INCA_IP_MBC+ 0x0004)) +#define INCA_IP_MBC_MBC_CR0_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***Mailbox CPU Control Register of Buffer 1***/ +#define INCA_IP_MBC_MBC_CR1 ((volatile u32*)(INCA_IP_MBC+ 0x0024)) +#define INCA_IP_MBC_MBC_CR1_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***Mailbox CPU Control Register of Buffer 2***/ +#define INCA_IP_MBC_MBC_CR2 ((volatile u32*)(INCA_IP_MBC+ 0x0044)) +#define INCA_IP_MBC_MBC_CR2_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***Mailbox CPU Control Register of Buffer 3***/ +#define INCA_IP_MBC_MBC_CR3 ((volatile u32*)(INCA_IP_MBC+ 0x0064)) +#define INCA_IP_MBC_MBC_CR3_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***Mailbox CPU Free Space of Buffer 0***/ +#define INCA_IP_MBC_MBC_FS0 ((volatile u32*)(INCA_IP_MBC+ 0x0008)) +#define INCA_IP_MBC_MBC_FS0_FS + +/***Mailbox CPU Free Space of Buffer 1***/ +#define INCA_IP_MBC_MBC_FS1 ((volatile u32*)(INCA_IP_MBC+ 0x0028)) +#define INCA_IP_MBC_MBC_FS1_FS + +/***Mailbox CPU Free Space of Buffer 2***/ +#define INCA_IP_MBC_MBC_FS2 ((volatile u32*)(INCA_IP_MBC+ 0x0048)) +#define INCA_IP_MBC_MBC_FS2_FS + +/***Mailbox CPU Free Space of Buffer 3***/ +#define INCA_IP_MBC_MBC_FS3 ((volatile u32*)(INCA_IP_MBC+ 0x0068)) +#define INCA_IP_MBC_MBC_FS3_FS + +/***Mailbox CPU Data Available in Buffer 0***/ +#define INCA_IP_MBC_MBC_DA0 ((volatile u32*)(INCA_IP_MBC+ 0x000C)) +#define INCA_IP_MBC_MBC_DA0_DA + +/***Mailbox CPU Data Available in Buffer 1***/ +#define INCA_IP_MBC_MBC_DA1 ((volatile u32*)(INCA_IP_MBC+ 0x002C)) +#define INCA_IP_MBC_MBC_DA1_DA + +/***Mailbox CPU Data Available in Buffer 2***/ +#define INCA_IP_MBC_MBC_DA2 ((volatile u32*)(INCA_IP_MBC+ 0x004C)) +#define INCA_IP_MBC_MBC_DA2_DA + +/***Mailbox CPU Data Available in Buffer 3***/ +#define INCA_IP_MBC_MBC_DA3 ((volatile u32*)(INCA_IP_MBC+ 0x006C)) +#define INCA_IP_MBC_MBC_DA3_DA + +/***Mailbox CPU Input Absolute Pointer of Buffer 0***/ +#define INCA_IP_MBC_MBC_IABS0 ((volatile u32*)(INCA_IP_MBC+ 0x0010)) +#define INCA_IP_MBC_MBC_IABS0_IABS + +/***Mailbox CPU Input Absolute Pointer of Buffer 1***/ +#define INCA_IP_MBC_MBC_IABS1 ((volatile u32*)(INCA_IP_MBC+ 0x0030)) +#define INCA_IP_MBC_MBC_IABS1_IABS + +/***Mailbox CPU Input Absolute Pointer of Buffer 2***/ +#define INCA_IP_MBC_MBC_IABS2 ((volatile u32*)(INCA_IP_MBC+ 0x0050)) +#define INCA_IP_MBC_MBC_IABS2_IABS + +/***Mailbox CPU Input Absolute Pointer of Buffer 3***/ +#define INCA_IP_MBC_MBC_IABS3 ((volatile u32*)(INCA_IP_MBC+ 0x0070)) +#define INCA_IP_MBC_MBC_IABS3_IABS + +/***Mailbox CPU Input Temporary Pointer of Buffer 0***/ +#define INCA_IP_MBC_MBC_ITMP0 ((volatile u32*)(INCA_IP_MBC+ 0x0014)) +#define INCA_IP_MBC_MBC_ITMP0_ITMP + +/***Mailbox CPU Input Temporary Pointer of Buffer 1***/ +#define INCA_IP_MBC_MBC_ITMP1 ((volatile u32*)(INCA_IP_MBC+ 0x0034)) +#define INCA_IP_MBC_MBC_ITMP1_ITMP + +/***Mailbox CPU Input Temporary Pointer of Buffer 2***/ +#define INCA_IP_MBC_MBC_ITMP2 ((volatile u32*)(INCA_IP_MBC+ 0x0054)) +#define INCA_IP_MBC_MBC_ITMP2_ITMP + +/***Mailbox CPU Input Temporary Pointer of Buffer 3***/ +#define INCA_IP_MBC_MBC_ITMP3 ((volatile u32*)(INCA_IP_MBC+ 0x0074)) +#define INCA_IP_MBC_MBC_ITMP3_ITMP + +/***Mailbox CPU Output Absolute Pointer of Buffer 0***/ +#define INCA_IP_MBC_MBC_OABS0 ((volatile u32*)(INCA_IP_MBC+ 0x0018)) +#define INCA_IP_MBC_MBC_OABS0_OABS + +/***Mailbox CPU Output Absolute Pointer of Buffer 1***/ +#define INCA_IP_MBC_MBC_OABS1 ((volatile u32*)(INCA_IP_MBC+ 0x0038)) +#define INCA_IP_MBC_MBC_OABS1_OABS + +/***Mailbox CPU Output Absolute Pointer of Buffer 2***/ +#define INCA_IP_MBC_MBC_OABS2 ((volatile u32*)(INCA_IP_MBC+ 0x0058)) +#define INCA_IP_MBC_MBC_OABS2_OABS + +/***Mailbox CPU Output Absolute Pointer of Buffer 3***/ +#define INCA_IP_MBC_MBC_OABS3 ((volatile u32*)(INCA_IP_MBC+ 0x0078)) +#define INCA_IP_MBC_MBC_OABS3_OABS + +/***Mailbox CPU Output Temporary Pointer of Buffer 0***/ +#define INCA_IP_MBC_MBC_OTMP0 ((volatile u32*)(INCA_IP_MBC+ 0x001C)) +#define INCA_IP_MBC_MBC_OTMP0_OTMP + +/***Mailbox CPU Output Temporary Pointer of Buffer 1***/ +#define INCA_IP_MBC_MBC_OTMP1 ((volatile u32*)(INCA_IP_MBC+ 0x003C)) +#define INCA_IP_MBC_MBC_OTMP1_OTMP + +/***Mailbox CPU Output Temporary Pointer of Buffer 2***/ +#define INCA_IP_MBC_MBC_OTMP2 ((volatile u32*)(INCA_IP_MBC+ 0x005C)) +#define INCA_IP_MBC_MBC_OTMP2_OTMP + +/***Mailbox CPU Output Temporary Pointer of Buffer 3***/ +#define INCA_IP_MBC_MBC_OTMP3 ((volatile u32*)(INCA_IP_MBC+ 0x007C)) +#define INCA_IP_MBC_MBC_OTMP3_OTMP + +/***DSP Control Register***/ +#define INCA_IP_MBC_DCTRL ((volatile u32*)(INCA_IP_MBC+ 0x00A0)) +#define INCA_IP_MBC_DCTRL_BA (1 << 0) +#define INCA_IP_MBC_DCTRL_BMOD (value) (((( 1 << 3) - 1) & (value)) << 1) +#define INCA_IP_MBC_DCTRL_IDL (1 << 4) +#define INCA_IP_MBC_DCTRL_RES (1 << 15) + +/***DSP Status Register***/ +#define INCA_IP_MBC_DSTA ((volatile u32*)(INCA_IP_MBC+ 0x00A4)) +#define INCA_IP_MBC_DSTA_IDLE (1 << 0) +#define INCA_IP_MBC_DSTA_PD (1 << 1) + +/***DSP Test 1 Register***/ +#define INCA_IP_MBC_DTST1 ((volatile u32*)(INCA_IP_MBC+ 0x00A8)) +#define INCA_IP_MBC_DTST1_ABORT (1 << 0) +#define INCA_IP_MBC_DTST1_HWF32 (1 << 1) +#define INCA_IP_MBC_DTST1_HWF4M (1 << 2) +#define INCA_IP_MBC_DTST1_HWFOP (1 << 3) + +/***********************************************************************/ +/* Module : Switch register address and bits */ +/***********************************************************************/ + +#define INCA_IP_Switch (0xBF104000) +/***********************************************************************/ + + +/***Unknown Destination Register***/ +#define INCA_IP_Switch_UN_DEST ((volatile u32*)(INCA_IP_Switch+ 0x0000)) +#define INCA_IP_Switch_UN_DEST_CB (1 << 8) +#define INCA_IP_Switch_UN_DEST_LB (1 << 7) +#define INCA_IP_Switch_UN_DEST_PB (1 << 6) +#define INCA_IP_Switch_UN_DEST_CM (1 << 5) +#define INCA_IP_Switch_UN_DEST_LM (1 << 4) +#define INCA_IP_Switch_UN_DEST_PM (1 << 3) +#define INCA_IP_Switch_UN_DEST_CU (1 << 2) +#define INCA_IP_Switch_UN_DEST_LU (1 << 1) +#define INCA_IP_Switch_UN_DEST_PU (1 << 0) + +/***VLAN Control Register***/ +#define INCA_IP_Switch_VLAN_CTRL ((volatile u32*)(INCA_IP_Switch+ 0x0004)) +#define INCA_IP_Switch_VLAN_CTRL_SC (1 << 6) +#define INCA_IP_Switch_VLAN_CTRL_SL (1 << 5) +#define INCA_IP_Switch_VLAN_CTRL_SP (1 << 4) +#define INCA_IP_Switch_VLAN_CTRL_TC (1 << 3) +#define INCA_IP_Switch_VLAN_CTRL_TL (1 << 2) +#define INCA_IP_Switch_VLAN_CTRL_TP (1 << 1) +#define INCA_IP_Switch_VLAN_CTRL_VA (1 << 0) + +/***PC VLAN Configuration Register***/ +#define INCA_IP_Switch_PC_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x0008)) +#define INCA_IP_Switch_PC_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 12) +#define INCA_IP_Switch_PC_VLAN_VLAN_ID (value) (((( 1 << 12) - 1) & (value)) << 0) + +/***LAN VLAN Configuration Register***/ +#define INCA_IP_Switch_LAN_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x000C)) +#define INCA_IP_Switch_LAN_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 12) +#define INCA_IP_Switch_LAN_VLAN_VLAN_ID (value) (((( 1 << 12) - 1) & (value)) << 0) + +/***CPU VLAN Configuration Register***/ +#define INCA_IP_Switch_CPU_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x0010)) +#define INCA_IP_Switch_CPU_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 12) +#define INCA_IP_Switch_CPU_VLAN_VLAN_ID (value) (((( 1 << 12) - 1) & (value)) << 0) + +/***Priority CoS Mapping Register***/ +#define INCA_IP_Switch_PRI_CoS ((volatile u32*)(INCA_IP_Switch+ 0x0014)) +#define INCA_IP_Switch_PRI_CoS_P7 (1 << 7) +#define INCA_IP_Switch_PRI_CoS_P6 (1 << 6) +#define INCA_IP_Switch_PRI_CoS_P5 (1 << 5) +#define INCA_IP_Switch_PRI_CoS_P4 (1 << 4) +#define INCA_IP_Switch_PRI_CoS_P3 (1 << 3) +#define INCA_IP_Switch_PRI_CoS_P2 (1 << 2) +#define INCA_IP_Switch_PRI_CoS_P1 (1 << 1) +#define INCA_IP_Switch_PRI_CoS_P0 (1 << 0) + +/***Spanning Tree Port Status Register***/ +#define INCA_IP_Switch_ST_PT ((volatile u32*)(INCA_IP_Switch+ 0x0018)) +#define INCA_IP_Switch_ST_PT_CPS (value) (((( 1 << 2) - 1) & (value)) << 4) +#define INCA_IP_Switch_ST_PT_LPS (value) (((( 1 << 2) - 1) & (value)) << 2) +#define INCA_IP_Switch_ST_PT_PPS (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***ARL Control Register***/ +#define INCA_IP_Switch_ARL_CTL ((volatile u32*)(INCA_IP_Switch+ 0x001C)) +#define INCA_IP_Switch_ARL_CTL_CHCC (1 << 15) +#define INCA_IP_Switch_ARL_CTL_CHCL (1 << 14) +#define INCA_IP_Switch_ARL_CTL_CHCP (1 << 13) +#define INCA_IP_Switch_ARL_CTL_CC (1 << 12) +#define INCA_IP_Switch_ARL_CTL_CL (1 << 11) +#define INCA_IP_Switch_ARL_CTL_CP (1 << 10) +#define INCA_IP_Switch_ARL_CTL_CG (1 << 9) +#define INCA_IP_Switch_ARL_CTL_PS (1 << 8) +#define INCA_IP_Switch_ARL_CTL_MRO (1 << 7) +#define INCA_IP_Switch_ARL_CTL_SRC (1 << 6) +#define INCA_IP_Switch_ARL_CTL_ATS (1 << 5) +#define INCA_IP_Switch_ARL_CTL_AGE_TICK_SEL (value) (((( 1 << 3) - 1) & (value)) << 2) +#define INCA_IP_Switch_ARL_CTL_MAF (1 << 1) +#define INCA_IP_Switch_ARL_CTL_ENL (1 << 0) +#define INCA_IP_Switch_ARL_CTL_Res (value) (((( 1 << 19) - 1) & (value)) << 13) + +/***CPU Access Control Register***/ +#define INCA_IP_Switch_CPU_ACTL ((volatile u32*)(INCA_IP_Switch+ 0x0020)) +#define INCA_IP_Switch_CPU_ACTL_RA (1 << 31) +#define INCA_IP_Switch_CPU_ACTL_RW (1 << 30) +#define INCA_IP_Switch_CPU_ACTL_Res (value) (((( 1 << 21) - 1) & (value)) << 9) +#define INCA_IP_Switch_CPU_ACTL_AVA (1 << 8) +#define INCA_IP_Switch_CPU_ACTL_IDX (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***CPU Access Data Register 1***/ +#define INCA_IP_Switch_DATA1 ((volatile u32*)(INCA_IP_Switch+ 0x0024)) +#define INCA_IP_Switch_DATA1_Data (value) (((( 1 << 24) - 1) & (value)) << 0) + +/***CPU Access Data Register 2***/ +#define INCA_IP_Switch_DATA2 ((volatile u32*)(INCA_IP_Switch+ 0x0028)) +#define INCA_IP_Switch_DATA2_Data + +/***CPU Port Control Register***/ +#define INCA_IP_Switch_CPU_PCTL ((volatile u32*)(INCA_IP_Switch+ 0x002C)) +#define INCA_IP_Switch_CPU_PCTL_DA_PORTS (value) (((( 1 << 3) - 1) & (value)) << 11) +#define INCA_IP_Switch_CPU_PCTL_DAC (1 << 10) +#define INCA_IP_Switch_CPU_PCTL_MA_STATE (value) (((( 1 << 3) - 1) & (value)) << 7) +#define INCA_IP_Switch_CPU_PCTL_MAM (1 << 6) +#define INCA_IP_Switch_CPU_PCTL_MA_Ports (value) (((( 1 << 3) - 1) & (value)) << 3) +#define INCA_IP_Switch_CPU_PCTL_MAC (1 << 2) +#define INCA_IP_Switch_CPU_PCTL_EML (1 << 1) +#define INCA_IP_Switch_CPU_PCTL_EDL (1 << 0) +#define INCA_IP_Switch_CPU_PCTL_Res (value) (((( 1 << 18) - 1) & (value)) << 14) + +/***DSCP CoS Mapping Register 1***/ +#define INCA_IP_Switch_DSCP_COS1 ((volatile u32*)(INCA_IP_Switch+ 0x0030)) +#define INCA_IP_Switch_DSCP_COS1_DSCP + +/***DSCP CoS Mapping Register 1***/ +#define INCA_IP_Switch_DSCP_COS2 ((volatile u32*)(INCA_IP_Switch+ 0x0034)) +#define INCA_IP_Switch_DSCP_COS2_DSCP + +/***PC WFQ Control Register***/ +#define INCA_IP_Switch_PC_WFQ_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0080)) +#define INCA_IP_Switch_PC_WFQ_CTL_P1 (1 << 9) +#define INCA_IP_Switch_PC_WFQ_CTL_P0 (1 << 8) +#define INCA_IP_Switch_PC_WFQ_CTL_WT1 (value) (((( 1 << 3) - 1) & (value)) << 5) +#define INCA_IP_Switch_PC_WFQ_CTL_WT0 (value) (((( 1 << 3) - 1) & (value)) << 2) +#define INCA_IP_Switch_PC_WFQ_CTL_SCH_SEL (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***PC TX Control Register***/ +#define INCA_IP_Switch_PC_TX_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0084)) +#define INCA_IP_Switch_PC_TX_CTL_ELR (1 << 1) +#define INCA_IP_Switch_PC_TX_CTL_EER (1 << 0) + +/***LAN WFQ Control Register***/ +#define INCA_IP_Switch_LAN_WFQ_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0100)) +#define INCA_IP_Switch_LAN_WFQ_CTL_P1 (1 << 9) +#define INCA_IP_Switch_LAN_WFQ_CTL_P0 (1 << 8) +#define INCA_IP_Switch_LAN_WFQ_CTL_WT1 (value) (((( 1 << 3) - 1) & (value)) << 5) +#define INCA_IP_Switch_LAN_WFQ_CTL_WT0 (value) (((( 1 << 3) - 1) & (value)) << 2) +#define INCA_IP_Switch_LAN_WFQ_CTL_SCH_SEL (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***LAN TX Control Register***/ +#define INCA_IP_Switch_LAN_TX_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0104)) +#define INCA_IP_Switch_LAN_TX_CTL_ELR (1 << 1) +#define INCA_IP_Switch_LAN_TX_CTL_EER (1 << 0) + +/***CPU WFQ Control Register***/ +#define INCA_IP_Switch_CPU_WFQ_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0180)) +#define INCA_IP_Switch_CPU_WFQ_CTL_P1 (1 << 9) +#define INCA_IP_Switch_CPU_WFQ_CTL_P0 (1 << 8) +#define INCA_IP_Switch_CPU_WFQ_CTL_WT1 (value) (((( 1 << 3) - 1) & (value)) << 5) +#define INCA_IP_Switch_CPU_WFQ_CTL_WT0 (value) (((( 1 << 3) - 1) & (value)) << 2) +#define INCA_IP_Switch_CPU_WFQ_CTL_SCH_SEL (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***PM PC RX Watermark Register***/ +#define INCA_IP_Switch_PC_WM ((volatile u32*)(INCA_IP_Switch+ 0x0200)) +#define INCA_IP_Switch_PC_WM_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24) +#define INCA_IP_Switch_PC_WM_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16) +#define INCA_IP_Switch_PC_WM_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8) +#define INCA_IP_Switch_PC_WM_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***PM LAN RX Watermark Register***/ +#define INCA_IP_Switch_LAN_WM ((volatile u32*)(INCA_IP_Switch+ 0x0204)) +#define INCA_IP_Switch_LAN_WM_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24) +#define INCA_IP_Switch_LAN_WM_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16) +#define INCA_IP_Switch_LAN_WM_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8) +#define INCA_IP_Switch_LAN_WM_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***PM CPU RX Watermark Register***/ +#define INCA_IP_Switch_CPU_WM ((volatile u32*)(INCA_IP_Switch+ 0x0208)) +#define INCA_IP_Switch_CPU_WM_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24) +#define INCA_IP_Switch_CPU_WM_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16) +#define INCA_IP_Switch_CPU_WM_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8) +#define INCA_IP_Switch_CPU_WM_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***PM CPU RX Watermark Register***/ +#define INCA_IP_Switch_GBL_WM ((volatile u32*)(INCA_IP_Switch+ 0x020C)) +#define INCA_IP_Switch_GBL_WM_GBL_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24) +#define INCA_IP_Switch_GBL_WM_GBL_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16) +#define INCA_IP_Switch_GBL_WM_GBL_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8) +#define INCA_IP_Switch_GBL_WM_GBL_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***PM Control Register***/ +#define INCA_IP_Switch_PM_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0210)) +#define INCA_IP_Switch_PM_CTL_GDN (1 << 3) +#define INCA_IP_Switch_PM_CTL_CDN (1 << 2) +#define INCA_IP_Switch_PM_CTL_LDN (1 << 1) +#define INCA_IP_Switch_PM_CTL_PDN (1 << 0) + +/***PM Header Control Register***/ +#define INCA_IP_Switch_PMAC_HD_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0280)) +#define INCA_IP_Switch_PMAC_HD_CTL_RL2 (1 << 21) +#define INCA_IP_Switch_PMAC_HD_CTL_RC (1 << 20) +#define INCA_IP_Switch_PMAC_HD_CTL_CM (1 << 19) +#define INCA_IP_Switch_PMAC_HD_CTL_CV (1 << 18) +#define INCA_IP_Switch_PMAC_HD_CTL_TYPE_LEN (value) (((( 1 << 16) - 1) & (value)) << 2) +#define INCA_IP_Switch_PMAC_HD_CTL_TAG (1 << 1) +#define INCA_IP_Switch_PMAC_HD_CTL_ADD (1 << 0) + +/***PM Source Address Register 1***/ +#define INCA_IP_Switch_PMAC_SA1 ((volatile u32*)(INCA_IP_Switch+ 0x0284)) +#define INCA_IP_Switch_PMAC_SA1_SA_47_32 (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***PM Source Address Register 2***/ +#define INCA_IP_Switch_PMAC_SA2 ((volatile u32*)(INCA_IP_Switch+ 0x0288)) +#define INCA_IP_Switch_PMAC_SA2_SA_31_0 + +/***PM Dest Address Register 1***/ +#define INCA_IP_Switch_PMAC_DA1 ((volatile u32*)(INCA_IP_Switch+ 0x028C)) +#define INCA_IP_Switch_PMAC_DA1_DA_47_32 (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***PM Dest Address Register 2***/ +#define INCA_IP_Switch_PMAC_DA2 ((volatile u32*)(INCA_IP_Switch+ 0x0290)) +#define INCA_IP_Switch_PMAC_DA2_DA_31_0 + +/***PM VLAN Register***/ +#define INCA_IP_Switch_PMAC_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x0294)) +#define INCA_IP_Switch_PMAC_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 13) +#define INCA_IP_Switch_PMAC_VLAN_CFI (1 << 12) +#define INCA_IP_Switch_PMAC_VLAN_VLANID (value) (((( 1 << 12) - 1) & (value)) << 0) + +/***PM TX IPG Counter Register***/ +#define INCA_IP_Switch_PMAC_TX_IPG ((volatile u32*)(INCA_IP_Switch+ 0x0298)) +#define INCA_IP_Switch_PMAC_TX_IPG_IPGCNT (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***PM RX IPG Counter Register***/ +#define INCA_IP_Switch_PMAC_RX_IPG ((volatile u32*)(INCA_IP_Switch+ 0x029C)) +#define INCA_IP_Switch_PMAC_RX_IPG_IPGCNT (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***Mirror Register***/ +#define INCA_IP_Switch_MRR ((volatile u32*)(INCA_IP_Switch+ 0x0300)) +#define INCA_IP_Switch_MRR_MRR (value) (((( 1 << 2) - 1) & (value)) << 6) +#define INCA_IP_Switch_MRR_EC (1 << 5) +#define INCA_IP_Switch_MRR_EL (1 << 4) +#define INCA_IP_Switch_MRR_EP (1 << 3) +#define INCA_IP_Switch_MRR_IC (1 << 2) +#define INCA_IP_Switch_MRR_IL (1 << 1) +#define INCA_IP_Switch_MRR_IP (1 << 0) + +/***Packet Length Register***/ +#define INCA_IP_Switch_PKT_LEN ((volatile u32*)(INCA_IP_Switch+ 0x0304)) +#define INCA_IP_Switch_PKT_LEN_ADD (1 << 11) +#define INCA_IP_Switch_PKT_LEN_MAX_PKT_LEN (value) (((( 1 << 11) - 1) & (value)) << 0) + +/***MDIO Access Register***/ +#define INCA_IP_Switch_MDIO_ACC ((volatile u32*)(INCA_IP_Switch+ 0x0480)) +#define INCA_IP_Switch_MDIO_ACC_RA (1 << 31) +#define INCA_IP_Switch_MDIO_ACC_RW (1 << 30) +#define INCA_IP_Switch_MDIO_ACC_PHY_ADDR (value) (((( 1 << 5) - 1) & (value)) << 21) +#define INCA_IP_Switch_MDIO_ACC_REG_ADDR (value) (((( 1 << 5) - 1) & (value)) << 16) +#define INCA_IP_Switch_MDIO_ACC_PHY_DATA (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***Ethernet PHY Register***/ +#define INCA_IP_Switch_EPHY ((volatile u32*)(INCA_IP_Switch+ 0x0484)) +#define INCA_IP_Switch_EPHY_SL (1 << 7) +#define INCA_IP_Switch_EPHY_SP (1 << 6) +#define INCA_IP_Switch_EPHY_LL (1 << 5) +#define INCA_IP_Switch_EPHY_LP (1 << 4) +#define INCA_IP_Switch_EPHY_DL (1 << 3) +#define INCA_IP_Switch_EPHY_DP (1 << 2) +#define INCA_IP_Switch_EPHY_PL (1 << 1) +#define INCA_IP_Switch_EPHY_PP (1 << 0) + +/***Pause Write Enable Register***/ +#define INCA_IP_Switch_PWR_EN ((volatile u32*)(INCA_IP_Switch+ 0x0488)) +#define INCA_IP_Switch_PWR_EN_PL (1 << 1) +#define INCA_IP_Switch_PWR_EN_PP (1 << 0) + +/***MDIO Configuration Register***/ +#define INCA_IP_Switch_MDIO_CFG ((volatile u32*)(INCA_IP_Switch+ 0x048C)) +#define INCA_IP_Switch_MDIO_CFG_MDS (value) (((( 1 << 2) - 1) & (value)) << 14) +#define INCA_IP_Switch_MDIO_CFG_PHY_LAN_ADDR (value) (((( 1 << 5) - 1) & (value)) << 9) +#define INCA_IP_Switch_MDIO_CFG_PHY_PC_ADDR (value) (((( 1 << 5) - 1) & (value)) << 4) +#define INCA_IP_Switch_MDIO_CFG_UEP (1 << 3) +#define INCA_IP_Switch_MDIO_CFG_PS (1 << 2) +#define INCA_IP_Switch_MDIO_CFG_PT (1 << 1) +#define INCA_IP_Switch_MDIO_CFG_UMM (1 << 0) + +/***Clock Configuration Register***/ +#define INCA_IP_Switch_CLK_CFG ((volatile u32*)(INCA_IP_Switch+ 0x0500)) +#define INCA_IP_Switch_CLK_CFG_ARL_ID (1 << 9) +#define INCA_IP_Switch_CLK_CFG_CPU_ID (1 << 8) +#define INCA_IP_Switch_CLK_CFG_LAN_ID (1 << 7) +#define INCA_IP_Switch_CLK_CFG_PC_ID (1 << 6) +#define INCA_IP_Switch_CLK_CFG_SE_ID (1 << 5) + +/***********************************************************************/ +/* Module : SSC1 register address and bits */ +/***********************************************************************/ + +#define INCA_IP_SSC1 (0xB8000500) +/***********************************************************************/ + + +/***Control Register (Programming Mode)***/ +#define INCA_IP_SSC1_SCC_CON_PRG ((volatile u32*)(INCA_IP_SSC1+ 0x0010)) +#define INCA_IP_SSC1_SCC_CON_PRG_EN (1 << 15) +#define INCA_IP_SSC1_SCC_CON_PRG_MS (1 << 14) +#define INCA_IP_SSC1_SCC_CON_PRG_AREN (1 << 12) +#define INCA_IP_SSC1_SCC_CON_PRG_BEN (1 << 11) +#define INCA_IP_SSC1_SCC_CON_PRG_PEN (1 << 10) +#define INCA_IP_SSC1_SCC_CON_PRG_REN (1 << 9) +#define INCA_IP_SSC1_SCC_CON_PRG_TEN (1 << 8) +#define INCA_IP_SSC1_SCC_CON_PRG_LB (1 << 7) +#define INCA_IP_SSC1_SCC_CON_PRG_PO (1 << 6) +#define INCA_IP_SSC1_SCC_CON_PRG_PH (1 << 5) +#define INCA_IP_SSC1_SCC_CON_PRG_HB (1 << 4) +#define INCA_IP_SSC1_SCC_CON_PRG_BM (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***SCC Control Register (Operating Mode)***/ +#define INCA_IP_SSC1_SCC_CON_OPR ((volatile u32*)(INCA_IP_SSC1+ 0x0010)) +#define INCA_IP_SSC1_SCC_CON_OPR_EN (1 << 15) +#define INCA_IP_SSC1_SCC_CON_OPR_MS (1 << 14) +#define INCA_IP_SSC1_SCC_CON_OPR_BSY (1 << 12) +#define INCA_IP_SSC1_SCC_CON_OPR_BE (1 << 11) +#define INCA_IP_SSC1_SCC_CON_OPR_PE (1 << 10) +#define INCA_IP_SSC1_SCC_CON_OPR_RE (1 << 9) +#define INCA_IP_SSC1_SCC_CON_OPR_TE (1 << 8) +#define INCA_IP_SSC1_SCC_CON_OPR_BC (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***SSC Write Hardware Modified Control Register***/ +#define INCA_IP_SSC1_SSC_WHBCON ((volatile u32*)(INCA_IP_SSC1+ 0x0040)) +#define INCA_IP_SSC1_SSC_WHBCON_SETBE (1 << 15) +#define INCA_IP_SSC1_SSC_WHBCON_SETPE (1 << 14) +#define INCA_IP_SSC1_SSC_WHBCON_SETRE (1 << 13) +#define INCA_IP_SSC1_SSC_WHBCON_SETTE (1 << 12) +#define INCA_IP_SSC1_SSC_WHBCON_CLRBE (1 << 11) +#define INCA_IP_SSC1_SSC_WHBCON_CLRPE (1 << 10) +#define INCA_IP_SSC1_SSC_WHBCON_CLRRE (1 << 9) +#define INCA_IP_SSC1_SSC_WHBCON_CLRTE (1 << 8) + +/***SSC Baudrate Timer Reload Register***/ +#define INCA_IP_SSC1_SSC_BR ((volatile u32*)(INCA_IP_SSC1+ 0x0014)) +#define INCA_IP_SSC1_SSC_BR_BR_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***SSC Transmitter Buffer Register***/ +#define INCA_IP_SSC1_SSC_TB ((volatile u32*)(INCA_IP_SSC1+ 0x0020)) +#define INCA_IP_SSC1_SSC_TB_TB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***SSC Receiver Buffer Register***/ +#define INCA_IP_SSC1_SSC_RB ((volatile u32*)(INCA_IP_SSC1+ 0x0024)) +#define INCA_IP_SSC1_SSC_RB_RB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***SSC Receive FIFO Control Register***/ +#define INCA_IP_SSC1_SSC_RXFCON ((volatile u32*)(INCA_IP_SSC1+ 0x0030)) +#define INCA_IP_SSC1_SSC_RXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8) +#define INCA_IP_SSC1_SSC_RXFCON_RXTMEN (1 << 2) +#define INCA_IP_SSC1_SSC_RXFCON_RXFLU (1 << 1) +#define INCA_IP_SSC1_SSC_RXFCON_RXFEN (1 << 0) + +/***SSC Transmit FIFO Control Register***/ +#define INCA_IP_SSC1_SSC_TXFCON ((volatile u32*)(INCA_IP_SSC1+ 0x0034)) +#define INCA_IP_SSC1_SSC_TXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8) +#define INCA_IP_SSC1_SSC_TXFCON_TXTMEN (1 << 2) +#define INCA_IP_SSC1_SSC_TXFCON_TXFLU (1 << 1) +#define INCA_IP_SSC1_SSC_TXFCON_TXFEN (1 << 0) + +/***SSC FIFO Status Register***/ +#define INCA_IP_SSC1_SSC_FSTAT ((volatile u32*)(INCA_IP_SSC1+ 0x0038)) +#define INCA_IP_SSC1_SSC_FSTAT_TXFFL (value) (((( 1 << 6) - 1) & (value)) << 8) +#define INCA_IP_SSC1_SSC_FSTAT_RXFFL (value) (((( 1 << 6) - 1) & (value)) << 0) + +/***SSC Clock Control Register***/ +#define INCA_IP_SSC1_SSC_CLC ((volatile u32*)(INCA_IP_SSC1+ 0x0000)) +#define INCA_IP_SSC1_SSC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8) +#define INCA_IP_SSC1_SSC_CLC_DISS (1 << 1) +#define INCA_IP_SSC1_SSC_CLC_DISR (1 << 0) + +/***********************************************************************/ +/* Module : SSC2 register address and bits */ +/***********************************************************************/ + +#define INCA_IP_SSC2 (0xB8000600) +/***********************************************************************/ + + +/***Control Register (Programming Mode)***/ +#define INCA_IP_SSC2_SCC_CON_PRG ((volatile u32*)(INCA_IP_SSC2+ 0x0010)) +#define INCA_IP_SSC2_SCC_CON_PRG_EN (1 << 15) +#define INCA_IP_SSC2_SCC_CON_PRG_MS (1 << 14) +#define INCA_IP_SSC2_SCC_CON_PRG_AREN (1 << 12) +#define INCA_IP_SSC2_SCC_CON_PRG_BEN (1 << 11) +#define INCA_IP_SSC2_SCC_CON_PRG_PEN (1 << 10) +#define INCA_IP_SSC2_SCC_CON_PRG_REN (1 << 9) +#define INCA_IP_SSC2_SCC_CON_PRG_TEN (1 << 8) +#define INCA_IP_SSC2_SCC_CON_PRG_LB (1 << 7) +#define INCA_IP_SSC2_SCC_CON_PRG_PO (1 << 6) +#define INCA_IP_SSC2_SCC_CON_PRG_PH (1 << 5) +#define INCA_IP_SSC2_SCC_CON_PRG_HB (1 << 4) +#define INCA_IP_SSC2_SCC_CON_PRG_BM (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***SCC Control Register (Operating Mode)***/ +#define INCA_IP_SSC2_SCC_CON_OPR ((volatile u32*)(INCA_IP_SSC2+ 0x0010)) +#define INCA_IP_SSC2_SCC_CON_OPR_EN (1 << 15) +#define INCA_IP_SSC2_SCC_CON_OPR_MS (1 << 14) +#define INCA_IP_SSC2_SCC_CON_OPR_BSY (1 << 12) +#define INCA_IP_SSC2_SCC_CON_OPR_BE (1 << 11) +#define INCA_IP_SSC2_SCC_CON_OPR_PE (1 << 10) +#define INCA_IP_SSC2_SCC_CON_OPR_RE (1 << 9) +#define INCA_IP_SSC2_SCC_CON_OPR_TE (1 << 8) +#define INCA_IP_SSC2_SCC_CON_OPR_BC (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***SSC Write Hardware Modified Control Register***/ +#define INCA_IP_SSC2_SSC_WHBCON ((volatile u32*)(INCA_IP_SSC2+ 0x0040)) +#define INCA_IP_SSC2_SSC_WHBCON_SETBE (1 << 15) +#define INCA_IP_SSC2_SSC_WHBCON_SETPE (1 << 14) +#define INCA_IP_SSC2_SSC_WHBCON_SETRE (1 << 13) +#define INCA_IP_SSC2_SSC_WHBCON_SETTE (1 << 12) +#define INCA_IP_SSC2_SSC_WHBCON_CLRBE (1 << 11) +#define INCA_IP_SSC2_SSC_WHBCON_CLRPE (1 << 10) +#define INCA_IP_SSC2_SSC_WHBCON_CLRRE (1 << 9) +#define INCA_IP_SSC2_SSC_WHBCON_CLRTE (1 << 8) + +/***SSC Baudrate Timer Reload Register***/ +#define INCA_IP_SSC2_SSC_BR ((volatile u32*)(INCA_IP_SSC2+ 0x0014)) +#define INCA_IP_SSC2_SSC_BR_BR_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***SSC Transmitter Buffer Register***/ +#define INCA_IP_SSC2_SSC_TB ((volatile u32*)(INCA_IP_SSC2+ 0x0020)) +#define INCA_IP_SSC2_SSC_TB_TB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***SSC Receiver Buffer Register***/ +#define INCA_IP_SSC2_SSC_RB ((volatile u32*)(INCA_IP_SSC2+ 0x0024)) +#define INCA_IP_SSC2_SSC_RB_RB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***SSC Receive FIFO Control Register***/ +#define INCA_IP_SSC2_SSC_RXFCON ((volatile u32*)(INCA_IP_SSC2+ 0x0030)) +#define INCA_IP_SSC2_SSC_RXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8) +#define INCA_IP_SSC2_SSC_RXFCON_RXTMEN (1 << 2) +#define INCA_IP_SSC2_SSC_RXFCON_RXFLU (1 << 1) +#define INCA_IP_SSC2_SSC_RXFCON_RXFEN (1 << 0) + +/***SSC Transmit FIFO Control Register***/ +#define INCA_IP_SSC2_SSC_TXFCON ((volatile u32*)(INCA_IP_SSC2+ 0x0034)) +#define INCA_IP_SSC2_SSC_TXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8) +#define INCA_IP_SSC2_SSC_TXFCON_TXTMEN (1 << 2) +#define INCA_IP_SSC2_SSC_TXFCON_TXFLU (1 << 1) +#define INCA_IP_SSC2_SSC_TXFCON_TXFEN (1 << 0) + +/***SSC FIFO Status Register***/ +#define INCA_IP_SSC2_SSC_FSTAT ((volatile u32*)(INCA_IP_SSC2+ 0x0038)) +#define INCA_IP_SSC2_SSC_FSTAT_TXFFL (value) (((( 1 << 6) - 1) & (value)) << 8) +#define INCA_IP_SSC2_SSC_FSTAT_RXFFL (value) (((( 1 << 6) - 1) & (value)) << 0) + +/***SSC Clock Control Register***/ +#define INCA_IP_SSC2_SSC_CLC ((volatile u32*)(INCA_IP_SSC2+ 0x0000)) +#define INCA_IP_SSC2_SSC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8) +#define INCA_IP_SSC2_SSC_CLC_DISS (1 << 1) +#define INCA_IP_SSC2_SSC_CLC_DISR (1 << 0) + +/***********************************************************************/ +/* Module : EBU register address and bits */ +/***********************************************************************/ + +#if defined(CONFIG_INCA_IP) +#define INCA_IP_EBU (0xB8000200) +#elif defined(CONFIG_PURPLE) +#define INCA_IP_EBU (0xB800D800) +#endif + +/***********************************************************************/ + + +/***EBU Clock Control Register***/ +#define INCA_IP_EBU_EBU_CLC ((volatile u32*)(INCA_IP_EBU+ 0x0000)) +#define INCA_IP_EBU_EBU_CLC_DISS (1 << 1) +#define INCA_IP_EBU_EBU_CLC_DISR (1 << 0) + +/***EBU Global Control Register***/ +#define INCA_IP_EBU_EBU_CON ((volatile u32*)(INCA_IP_EBU+ 0x0010)) +#define INCA_IP_EBU_EBU_CON_DTACS (value) (((( 1 << 3) - 1) & (value)) << 20) +#define INCA_IP_EBU_EBU_CON_DTARW (value) (((( 1 << 3) - 1) & (value)) << 16) +#define INCA_IP_EBU_EBU_CON_TOUTC (value) (((( 1 << 8) - 1) & (value)) << 8) +#define INCA_IP_EBU_EBU_CON_ARBMODE (value) (((( 1 << 2) - 1) & (value)) << 6) +#define INCA_IP_EBU_EBU_CON_ARBSYNC (1 << 5) +#define INCA_IP_EBU_EBU_CON_1 (1 << 3) + +/***EBU Address Select Register 0***/ +#define INCA_IP_EBU_EBU_ADDSEL0 ((volatile u32*)(INCA_IP_EBU+ 0x0020)) +#define INCA_IP_EBU_EBU_ADDSEL0_BASE (value) (((( 1 << 20) - 1) & (value)) << 12) +#define INCA_IP_EBU_EBU_ADDSEL0_MASK (value) (((( 1 << 4) - 1) & (value)) << 4) +#define INCA_IP_EBU_EBU_ADDSEL0_MIRRORE (1 << 1) +#define INCA_IP_EBU_EBU_ADDSEL0_REGEN (1 << 0) + +/***EBU Address Select Register 1***/ +#define INCA_IP_EBU_EBU_ADDSEL1 ((volatile u32*)(INCA_IP_EBU+ 0x0024)) +#define INCA_IP_EBU_EBU_ADDSEL1_BASE (value) (((( 1 << 20) - 1) & (value)) << 12) +#define INCA_IP_EBU_EBU_ADDSEL1_MASK (value) (((( 1 << 4) - 1) & (value)) << 4) +#define INCA_IP_EBU_EBU_ADDSEL1_MIRRORE (1 << 1) +#define INCA_IP_EBU_EBU_ADDSEL1_REGEN (1 << 0) + +/***EBU Address Select Register 2***/ +#define INCA_IP_EBU_EBU_ADDSEL2 ((volatile u32*)(INCA_IP_EBU+ 0x0028)) +#define INCA_IP_EBU_EBU_ADDSEL2_BASE (value) (((( 1 << 20) - 1) & (value)) << 12) +#define INCA_IP_EBU_EBU_ADDSEL2_MASK (value) (((( 1 << 4) - 1) & (value)) << 4) +#define INCA_IP_EBU_EBU_ADDSEL2_MIRRORE (1 << 1) +#define INCA_IP_EBU_EBU_ADDSEL2_REGEN (1 << 0) + +/***EBU Bus Configuration Register 0***/ +#define INCA_IP_EBU_EBU_BUSCON0 ((volatile u32*)(INCA_IP_EBU+ 0x0060)) +#define INCA_IP_EBU_EBU_BUSCON0_WRDIS (1 << 31) +#define INCA_IP_EBU_EBU_BUSCON0_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29) +#define INCA_IP_EBU_EBU_BUSCON0_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27) +#define INCA_IP_EBU_EBU_BUSCON0_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24) +#define INCA_IP_EBU_EBU_BUSCON0_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22) +#define INCA_IP_EBU_EBU_BUSCON0_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20) +#define INCA_IP_EBU_EBU_BUSCON0_WAITINV (1 << 19) +#define INCA_IP_EBU_EBU_BUSCON0_SETUP (1 << 18) +#define INCA_IP_EBU_EBU_BUSCON0_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16) +#define INCA_IP_EBU_EBU_BUSCON0_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9) +#define INCA_IP_EBU_EBU_BUSCON0_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6) +#define INCA_IP_EBU_EBU_BUSCON0_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4) +#define INCA_IP_EBU_EBU_BUSCON0_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2) +#define INCA_IP_EBU_EBU_BUSCON0_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***EBU Bus Configuration Register 1***/ +#define INCA_IP_EBU_EBU_BUSCON1 ((volatile u32*)(INCA_IP_EBU+ 0x0064)) +#define INCA_IP_EBU_EBU_BUSCON1_WRDIS (1 << 31) +#define INCA_IP_EBU_EBU_BUSCON1_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29) +#define INCA_IP_EBU_EBU_BUSCON1_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27) +#define INCA_IP_EBU_EBU_BUSCON1_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24) +#define INCA_IP_EBU_EBU_BUSCON1_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22) +#define INCA_IP_EBU_EBU_BUSCON1_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20) +#define INCA_IP_EBU_EBU_BUSCON1_WAITINV (1 << 19) +#define INCA_IP_EBU_EBU_BUSCON1_SETUP (1 << 18) +#define INCA_IP_EBU_EBU_BUSCON1_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16) +#define INCA_IP_EBU_EBU_BUSCON1_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9) +#define INCA_IP_EBU_EBU_BUSCON1_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6) +#define INCA_IP_EBU_EBU_BUSCON1_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4) +#define INCA_IP_EBU_EBU_BUSCON1_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2) +#define INCA_IP_EBU_EBU_BUSCON1_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***EBU Bus Configuration Register 2***/ +#define INCA_IP_EBU_EBU_BUSCON2 ((volatile u32*)(INCA_IP_EBU+ 0x0068)) +#define INCA_IP_EBU_EBU_BUSCON2_WRDIS (1 << 31) +#define INCA_IP_EBU_EBU_BUSCON2_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29) +#define INCA_IP_EBU_EBU_BUSCON2_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27) +#define INCA_IP_EBU_EBU_BUSCON2_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24) +#define INCA_IP_EBU_EBU_BUSCON2_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22) +#define INCA_IP_EBU_EBU_BUSCON2_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20) +#define INCA_IP_EBU_EBU_BUSCON2_WAITINV (1 << 19) +#define INCA_IP_EBU_EBU_BUSCON2_SETUP (1 << 18) +#define INCA_IP_EBU_EBU_BUSCON2_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16) +#define INCA_IP_EBU_EBU_BUSCON2_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9) +#define INCA_IP_EBU_EBU_BUSCON2_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6) +#define INCA_IP_EBU_EBU_BUSCON2_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4) +#define INCA_IP_EBU_EBU_BUSCON2_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2) +#define INCA_IP_EBU_EBU_BUSCON2_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***********************************************************************/ +/* Module : SDRAM register address and bits */ +/***********************************************************************/ + +#define INCA_IP_SDRAM (0xBF800000) +/***********************************************************************/ + + +/***MC Access Error Cause Register***/ +#define INCA_IP_SDRAM_MC_ERRCAUSE ((volatile u32*)(INCA_IP_SDRAM+ 0x0100)) +#define INCA_IP_SDRAM_MC_ERRCAUSE_ERR (1 << 31) +#define INCA_IP_SDRAM_MC_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16) +#define INCA_IP_SDRAM_MC_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0) +#define INCA_IP_SDRAM_MC_ERRCAUSE_Res (value) (((( 1 << NaN) - 1) & (value)) << NaN) + +/***MC Access Error Address Register***/ +#define INCA_IP_SDRAM_MC_ERRADDR ((volatile u32*)(INCA_IP_SDRAM+ 0x0108)) +#define INCA_IP_SDRAM_MC_ERRADDR_ADDR + +/***MC I/O General Purpose Register***/ +#define INCA_IP_SDRAM_MC_IOGP ((volatile u32*)(INCA_IP_SDRAM+ 0x0800)) +#define INCA_IP_SDRAM_MC_IOGP_GPR6 (value) (((( 1 << 4) - 1) & (value)) << 28) +#define INCA_IP_SDRAM_MC_IOGP_GPR5 (value) (((( 1 << 4) - 1) & (value)) << 24) +#define INCA_IP_SDRAM_MC_IOGP_GPR4 (value) (((( 1 << 4) - 1) & (value)) << 20) +#define INCA_IP_SDRAM_MC_IOGP_GPR3 (value) (((( 1 << 4) - 1) & (value)) << 16) +#define INCA_IP_SDRAM_MC_IOGP_GPR2 (value) (((( 1 << 4) - 1) & (value)) << 12) +#define INCA_IP_SDRAM_MC_IOGP_CPS (1 << 11) +#define INCA_IP_SDRAM_MC_IOGP_CLKDELAY (value) (((( 1 << 3) - 1) & (value)) << 8) +#define INCA_IP_SDRAM_MC_IOGP_CLKRAT (value) (((( 1 << 4) - 1) & (value)) << 4) +#define INCA_IP_SDRAM_MC_IOGP_RDDEL (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***MC Self Refresh Register***/ +#define INCA_IP_SDRAM_MC_SELFRFSH ((volatile u32*)(INCA_IP_SDRAM+ 0x0A00)) +#define INCA_IP_SDRAM_MC_SELFRFSH_PWDS (1 << 1) +#define INCA_IP_SDRAM_MC_SELFRFSH_PWD (1 << 0) +#define INCA_IP_SDRAM_MC_SELFRFSH_Res (value) (((( 1 << 30) - 1) & (value)) << 2) + +/***MC Enable Register***/ +#define INCA_IP_SDRAM_MC_CTRLENA ((volatile u32*)(INCA_IP_SDRAM+ 0x1000)) +#define INCA_IP_SDRAM_MC_CTRLENA_ENA (1 << 0) +#define INCA_IP_SDRAM_MC_CTRLENA_Res (value) (((( 1 << 31) - 1) & (value)) << 1) + +/***MC Mode Register Setup Code***/ +#define INCA_IP_SDRAM_MC_MRSCODE ((volatile u32*)(INCA_IP_SDRAM+ 0x1008)) +#define INCA_IP_SDRAM_MC_MRSCODE_UMC (value) (((( 1 << 5) - 1) & (value)) << 7) +#define INCA_IP_SDRAM_MC_MRSCODE_CL (value) (((( 1 << 3) - 1) & (value)) << 4) +#define INCA_IP_SDRAM_MC_MRSCODE_WT (1 << 3) +#define INCA_IP_SDRAM_MC_MRSCODE_BL (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***MC Configuration Data-word Width Register***/ +#define INCA_IP_SDRAM_MC_CFGDW ((volatile u32*)(INCA_IP_SDRAM+ 0x1010)) +#define INCA_IP_SDRAM_MC_CFGDW_DW (value) (((( 1 << 4) - 1) & (value)) << 0) +#define INCA_IP_SDRAM_MC_CFGDW_Res (value) (((( 1 << 28) - 1) & (value)) << 4) + +/***MC Configuration Physical Bank 0 Register***/ +#define INCA_IP_SDRAM_MC_CFGPB0 ((volatile u32*)(INCA_IP_SDRAM+ 0x1018)) +#define INCA_IP_SDRAM_MC_CFGPB0_MCSEN0 (value) (((( 1 << 4) - 1) & (value)) << 12) +#define INCA_IP_SDRAM_MC_CFGPB0_BANKN0 (value) (((( 1 << 4) - 1) & (value)) << 8) +#define INCA_IP_SDRAM_MC_CFGPB0_ROWW0 (value) (((( 1 << 4) - 1) & (value)) << 4) +#define INCA_IP_SDRAM_MC_CFGPB0_COLW0 (value) (((( 1 << 4) - 1) & (value)) << 0) +#define INCA_IP_SDRAM_MC_CFGPB0_Res (value) (((( 1 << 16) - 1) & (value)) << 16) + +/***MC Latency Register***/ +#define INCA_IP_SDRAM_MC_LATENCY ((volatile u32*)(INCA_IP_SDRAM+ 0x1038)) +#define INCA_IP_SDRAM_MC_LATENCY_TRP (value) (((( 1 << 4) - 1) & (value)) << 16) +#define INCA_IP_SDRAM_MC_LATENCY_TRAS (value) (((( 1 << 4) - 1) & (value)) << 12) +#define INCA_IP_SDRAM_MC_LATENCY_TRCD (value) (((( 1 << 4) - 1) & (value)) << 8) +#define INCA_IP_SDRAM_MC_LATENCY_TDPL (value) (((( 1 << 4) - 1) & (value)) << 4) +#define INCA_IP_SDRAM_MC_LATENCY_TDAL (value) (((( 1 << 4) - 1) & (value)) << 0) +#define INCA_IP_SDRAM_MC_LATENCY_Res (value) (((( 1 << 12) - 1) & (value)) << 20) + +/***MC Refresh Cycle Time Register***/ +#define INCA_IP_SDRAM_MC_TREFRESH ((volatile u32*)(INCA_IP_SDRAM+ 0x1040)) +#define INCA_IP_SDRAM_MC_TREFRESH_TREF (value) (((( 1 << 13) - 1) & (value)) << 0) +#define INCA_IP_SDRAM_MC_TREFRESH_Res (value) (((( 1 << 19) - 1) & (value)) << 13) + +/***********************************************************************/ +/* Module : GPTU register address and bits */ +/***********************************************************************/ + +#define INCA_IP_GPTU (0xB8000300) +/***********************************************************************/ + + +/***GPT Clock Control Register***/ +#define INCA_IP_GPTU_GPT_CLC ((volatile u32*)(INCA_IP_GPTU+ 0x0000)) +#define INCA_IP_GPTU_GPT_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8) +#define INCA_IP_GPTU_GPT_CLC_DISS (1 << 1) +#define INCA_IP_GPTU_GPT_CLC_DISR (1 << 0) + +/***GPT Timer 3 Control Register***/ +#define INCA_IP_GPTU_GPT_T3CON ((volatile u32*)(INCA_IP_GPTU+ 0x0014)) +#define INCA_IP_GPTU_GPT_T3CON_T3RDIR (1 << 15) +#define INCA_IP_GPTU_GPT_T3CON_T3CHDIR (1 << 14) +#define INCA_IP_GPTU_GPT_T3CON_T3EDGE (1 << 13) +#define INCA_IP_GPTU_GPT_T3CON_BPS1 (value) (((( 1 << 2) - 1) & (value)) << 11) +#define INCA_IP_GPTU_GPT_T3CON_T3OTL (1 << 10) +#define INCA_IP_GPTU_GPT_T3CON_T3UD (1 << 7) +#define INCA_IP_GPTU_GPT_T3CON_T3R (1 << 6) +#define INCA_IP_GPTU_GPT_T3CON_T3M (value) (((( 1 << 3) - 1) & (value)) << 3) +#define INCA_IP_GPTU_GPT_T3CON_T3I (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***GPT Write Hardware Modified Timer 3 Control Register +If set and clear bit are written concurrently with 1, the associated bit is not changed.***/ +#define INCA_IP_GPTU_GPT_WHBT3CON ((volatile u32*)(INCA_IP_GPTU+ 0x004C)) +#define INCA_IP_GPTU_GPT_WHBT3CON_SETT3CHDIR (1 << 15) +#define INCA_IP_GPTU_GPT_WHBT3CON_CLRT3CHDIR (1 << 14) +#define INCA_IP_GPTU_GPT_WHBT3CON_SETT3EDGE (1 << 13) +#define INCA_IP_GPTU_GPT_WHBT3CON_CLRT3EDGE (1 << 12) +#define INCA_IP_GPTU_GPT_WHBT3CON_SETT3OTL (1 << 11) +#define INCA_IP_GPTU_GPT_WHBT3CON_CLRT3OTL (1 << 10) + +/***GPT Timer 2 Control Register***/ +#define INCA_IP_GPTU_GPT_T2CON ((volatile u32*)(INCA_IP_GPTU+ 0x0010)) +#define INCA_IP_GPTU_GPT_T2CON_TxRDIR (1 << 15) +#define INCA_IP_GPTU_GPT_T2CON_TxCHDIR (1 << 14) +#define INCA_IP_GPTU_GPT_T2CON_TxEDGE (1 << 13) +#define INCA_IP_GPTU_GPT_T2CON_TxIRDIS (1 << 12) +#define INCA_IP_GPTU_GPT_T2CON_TxRC (1 << 9) +#define INCA_IP_GPTU_GPT_T2CON_TxUD (1 << 7) +#define INCA_IP_GPTU_GPT_T2CON_TxR (1 << 6) +#define INCA_IP_GPTU_GPT_T2CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3) +#define INCA_IP_GPTU_GPT_T2CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***GPT Timer 4 Control Register***/ +#define INCA_IP_GPTU_GPT_T4CON ((volatile u32*)(INCA_IP_GPTU+ 0x0018)) +#define INCA_IP_GPTU_GPT_T4CON_TxRDIR (1 << 15) +#define INCA_IP_GPTU_GPT_T4CON_TxCHDIR (1 << 14) +#define INCA_IP_GPTU_GPT_T4CON_TxEDGE (1 << 13) +#define INCA_IP_GPTU_GPT_T4CON_TxIRDIS (1 << 12) +#define INCA_IP_GPTU_GPT_T4CON_TxRC (1 << 9) +#define INCA_IP_GPTU_GPT_T4CON_TxUD (1 << 7) +#define INCA_IP_GPTU_GPT_T4CON_TxR (1 << 6) +#define INCA_IP_GPTU_GPT_T4CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3) +#define INCA_IP_GPTU_GPT_T4CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***GPT Write HW Modified Timer 2 Control Register If set + and clear bit are written concurrently with 1, the associated bit is not changed.***/ +#define INCA_IP_GPTU_GPT_WHBT2CON ((volatile u32*)(INCA_IP_GPTU+ 0x0048)) +#define INCA_IP_GPTU_GPT_WHBT2CON_SETTxCHDIR (1 << 15) +#define INCA_IP_GPTU_GPT_WHBT2CON_CLRTxCHDIR (1 << 14) +#define INCA_IP_GPTU_GPT_WHBT2CON_SETTxEDGE (1 << 13) +#define INCA_IP_GPTU_GPT_WHBT2CON_CLRTxEDGE (1 << 12) + +/***GPT Write HW Modified Timer 4 Control Register If set + and clear bit are written concurrently with 1, the associated bit is not changed.***/ +#define INCA_IP_GPTU_GPT_WHBT4CON ((volatile u32*)(INCA_IP_GPTU+ 0x0050)) +#define INCA_IP_GPTU_GPT_WHBT4CON_SETTxCHDIR (1 << 15) +#define INCA_IP_GPTU_GPT_WHBT4CON_CLRTxCHDIR (1 << 14) +#define INCA_IP_GPTU_GPT_WHBT4CON_SETTxEDGE (1 << 13) +#define INCA_IP_GPTU_GPT_WHBT4CON_CLRTxEDGE (1 << 12) + +/***GPT Capture Reload Register***/ +#define INCA_IP_GPTU_GPT_CAPREL ((volatile u32*)(INCA_IP_GPTU+ 0x0030)) +#define INCA_IP_GPTU_GPT_CAPREL_CAPREL (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***GPT Timer 2 Register***/ +#define INCA_IP_GPTU_GPT_T2 ((volatile u32*)(INCA_IP_GPTU+ 0x0034)) +#define INCA_IP_GPTU_GPT_T2_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***GPT Timer 3 Register***/ +#define INCA_IP_GPTU_GPT_T3 ((volatile u32*)(INCA_IP_GPTU+ 0x0038)) +#define INCA_IP_GPTU_GPT_T3_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***GPT Timer 4 Register***/ +#define INCA_IP_GPTU_GPT_T4 ((volatile u32*)(INCA_IP_GPTU+ 0x003C)) +#define INCA_IP_GPTU_GPT_T4_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***GPT Timer 5 Register***/ +#define INCA_IP_GPTU_GPT_T5 ((volatile u32*)(INCA_IP_GPTU+ 0x0040)) +#define INCA_IP_GPTU_GPT_T5_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***GPT Timer 6 Register***/ +#define INCA_IP_GPTU_GPT_T6 ((volatile u32*)(INCA_IP_GPTU+ 0x0044)) +#define INCA_IP_GPTU_GPT_T6_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***GPT Timer 6 Control Register***/ +#define INCA_IP_GPTU_GPT_T6CON ((volatile u32*)(INCA_IP_GPTU+ 0x0020)) +#define INCA_IP_GPTU_GPT_T6CON_T6SR (1 << 15) +#define INCA_IP_GPTU_GPT_T6CON_T6CLR (1 << 14) +#define INCA_IP_GPTU_GPT_T6CON_BPS2 (value) (((( 1 << 2) - 1) & (value)) << 11) +#define INCA_IP_GPTU_GPT_T6CON_T6OTL (1 << 10) +#define INCA_IP_GPTU_GPT_T6CON_T6UD (1 << 7) +#define INCA_IP_GPTU_GPT_T6CON_T6R (1 << 6) +#define INCA_IP_GPTU_GPT_T6CON_T6M (value) (((( 1 << 3) - 1) & (value)) << 3) +#define INCA_IP_GPTU_GPT_T6CON_T6I (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***GPT Write HW Modified Timer 6 Control Register If set + and clear bit are written concurrently with 1, the associated bit is not changed.***/ +#define INCA_IP_GPTU_GPT_WHBT6CON ((volatile u32*)(INCA_IP_GPTU+ 0x0054)) +#define INCA_IP_GPTU_GPT_WHBT6CON_SETT6OTL (1 << 11) +#define INCA_IP_GPTU_GPT_WHBT6CON_CLRT6OTL (1 << 10) + +/***GPT Timer 5 Control Register***/ +#define INCA_IP_GPTU_GPT_T5CON ((volatile u32*)(INCA_IP_GPTU+ 0x001C)) +#define INCA_IP_GPTU_GPT_T5CON_T5SC (1 << 15) +#define INCA_IP_GPTU_GPT_T5CON_T5CLR (1 << 14) +#define INCA_IP_GPTU_GPT_T5CON_CI (value) (((( 1 << 2) - 1) & (value)) << 12) +#define INCA_IP_GPTU_GPT_T5CON_T5CC (1 << 11) +#define INCA_IP_GPTU_GPT_T5CON_CT3 (1 << 10) +#define INCA_IP_GPTU_GPT_T5CON_T5RC (1 << 9) +#define INCA_IP_GPTU_GPT_T5CON_T5UDE (1 << 8) +#define INCA_IP_GPTU_GPT_T5CON_T5UD (1 << 7) +#define INCA_IP_GPTU_GPT_T5CON_T5R (1 << 6) +#define INCA_IP_GPTU_GPT_T5CON_T5M (value) (((( 1 << 3) - 1) & (value)) << 3) +#define INCA_IP_GPTU_GPT_T5CON_T5I (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***********************************************************************/ +/* Module : IOM register address and bits */ +/***********************************************************************/ + +#define INCA_IP_IOM (0xBF105000) +/***********************************************************************/ + + +/***Receive FIFO***/ +#define INCA_IP_IOM_RFIFO ((volatile u32*)(INCA_IP_IOM+ 0x0000)) +#define INCA_IP_IOM_RFIFO_RXD (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***Transmit FIFO***/ +#define INCA_IP_IOM_XFIFO ((volatile u32*)(INCA_IP_IOM+ 0x0000)) +#define INCA_IP_IOM_XFIFO_TXD (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***Interrupt Status Register HDLC***/ +#define INCA_IP_IOM_ISTAH ((volatile u32*)(INCA_IP_IOM+ 0x0080)) +#define INCA_IP_IOM_ISTAH_RME (1 << 7) +#define INCA_IP_IOM_ISTAH_RPF (1 << 6) +#define INCA_IP_IOM_ISTAH_RFO (1 << 5) +#define INCA_IP_IOM_ISTAH_XPR (1 << 4) +#define INCA_IP_IOM_ISTAH_XMR (1 << 3) +#define INCA_IP_IOM_ISTAH_XDU (1 << 2) + +/***Interrupt Mask Register HDLC***/ +#define INCA_IP_IOM_MASKH ((volatile u32*)(INCA_IP_IOM+ 0x0080)) +#define INCA_IP_IOM_MASKH_RME (1 << 7) +#define INCA_IP_IOM_MASKH_RPF (1 << 6) +#define INCA_IP_IOM_MASKH_RFO (1 << 5) +#define INCA_IP_IOM_MASKH_XPR (1 << 4) +#define INCA_IP_IOM_MASKH_XMR (1 << 3) +#define INCA_IP_IOM_MASKH_XDU (1 << 2) + +/***Status Register***/ +#define INCA_IP_IOM_STAR ((volatile u32*)(INCA_IP_IOM+ 0x0084)) +#define INCA_IP_IOM_STAR_XDOV (1 << 7) +#define INCA_IP_IOM_STAR_XFW (1 << 6) +#define INCA_IP_IOM_STAR_RACI (1 << 3) +#define INCA_IP_IOM_STAR_XACI (1 << 1) + +/***Command Register***/ +#define INCA_IP_IOM_CMDR ((volatile u32*)(INCA_IP_IOM+ 0x0084)) +#define INCA_IP_IOM_CMDR_RMC (1 << 7) +#define INCA_IP_IOM_CMDR_RRES (1 << 6) +#define INCA_IP_IOM_CMDR_XTF (1 << 3) +#define INCA_IP_IOM_CMDR_XME (1 << 1) +#define INCA_IP_IOM_CMDR_XRES (1 << 0) + +/***Mode Register***/ +#define INCA_IP_IOM_MODEH ((volatile u32*)(INCA_IP_IOM+ 0x0088)) +#define INCA_IP_IOM_MODEH_MDS2 (1 << 7) +#define INCA_IP_IOM_MODEH_MDS1 (1 << 6) +#define INCA_IP_IOM_MODEH_MDS0 (1 << 5) +#define INCA_IP_IOM_MODEH_RAC (1 << 3) +#define INCA_IP_IOM_MODEH_DIM2 (1 << 2) +#define INCA_IP_IOM_MODEH_DIM1 (1 << 1) +#define INCA_IP_IOM_MODEH_DIM0 (1 << 0) + +/***Extended Mode Register***/ +#define INCA_IP_IOM_EXMR ((volatile u32*)(INCA_IP_IOM+ 0x008C)) +#define INCA_IP_IOM_EXMR_XFBS (1 << 7) +#define INCA_IP_IOM_EXMR_RFBS (value) (((( 1 << 2) - 1) & (value)) << 5) +#define INCA_IP_IOM_EXMR_SRA (1 << 4) +#define INCA_IP_IOM_EXMR_XCRC (1 << 3) +#define INCA_IP_IOM_EXMR_RCRC (1 << 2) +#define INCA_IP_IOM_EXMR_ITF (1 << 0) + +/***SAPI1 Register***/ +#define INCA_IP_IOM_SAP1 ((volatile u32*)(INCA_IP_IOM+ 0x0094)) +#define INCA_IP_IOM_SAP1_SAPI1 (value) (((( 1 << 6) - 1) & (value)) << 2) +#define INCA_IP_IOM_SAP1_MHA (1 << 0) + +/***Receive Frame Byte Count Low***/ +#define INCA_IP_IOM_RBCL ((volatile u32*)(INCA_IP_IOM+ 0x0098)) +#define INCA_IP_IOM_RBCL_RBC(value) (1 << value) + + +/***SAPI2 Register***/ +#define INCA_IP_IOM_SAP2 ((volatile u32*)(INCA_IP_IOM+ 0x0098)) +#define INCA_IP_IOM_SAP2_SAPI2 (value) (((( 1 << 6) - 1) & (value)) << 2) +#define INCA_IP_IOM_SAP2_MLA (1 << 0) + +/***Receive Frame Byte Count High***/ +#define INCA_IP_IOM_RBCH ((volatile u32*)(INCA_IP_IOM+ 0x009C)) +#define INCA_IP_IOM_RBCH_OV (1 << 4) +#define INCA_IP_IOM_RBCH_RBC11 (1 << 3) +#define INCA_IP_IOM_RBCH_RBC10 (1 << 2) +#define INCA_IP_IOM_RBCH_RBC9 (1 << 1) +#define INCA_IP_IOM_RBCH_RBC8 (1 << 0) + +/***TEI1 Register 1***/ +#define INCA_IP_IOM_TEI1 ((volatile u32*)(INCA_IP_IOM+ 0x009C)) +#define INCA_IP_IOM_TEI1_TEI1 (value) (((( 1 << 7) - 1) & (value)) << 1) +#define INCA_IP_IOM_TEI1_EA (1 << 0) + +/***Receive Status Register***/ +#define INCA_IP_IOM_RSTA ((volatile u32*)(INCA_IP_IOM+ 0x00A0)) +#define INCA_IP_IOM_RSTA_VFR (1 << 7) +#define INCA_IP_IOM_RSTA_RDO (1 << 6) +#define INCA_IP_IOM_RSTA_CRC (1 << 5) +#define INCA_IP_IOM_RSTA_RAB (1 << 4) +#define INCA_IP_IOM_RSTA_SA1 (1 << 3) +#define INCA_IP_IOM_RSTA_SA0 (1 << 2) +#define INCA_IP_IOM_RSTA_TA (1 << 0) +#define INCA_IP_IOM_RSTA_CR (1 << 1) + +/***TEI2 Register***/ +#define INCA_IP_IOM_TEI2 ((volatile u32*)(INCA_IP_IOM+ 0x00A0)) +#define INCA_IP_IOM_TEI2_TEI2 (value) (((( 1 << 7) - 1) & (value)) << 1) +#define INCA_IP_IOM_TEI2_EA (1 << 0) + +/***Test Mode Register HDLC***/ +#define INCA_IP_IOM_TMH ((volatile u32*)(INCA_IP_IOM+ 0x00A4)) +#define INCA_IP_IOM_TMH_TLP (1 << 0) + +/***Command/Indication Receive 0***/ +#define INCA_IP_IOM_CIR0 ((volatile u32*)(INCA_IP_IOM+ 0x00B8)) +#define INCA_IP_IOM_CIR0_CODR0 (value) (((( 1 << 4) - 1) & (value)) << 4) +#define INCA_IP_IOM_CIR0_CIC0 (1 << 3) +#define INCA_IP_IOM_CIR0_CIC1 (1 << 2) +#define INCA_IP_IOM_CIR0_SG (1 << 1) +#define INCA_IP_IOM_CIR0_BAS (1 << 0) + +/***Command/Indication Transmit 0***/ +#define INCA_IP_IOM_CIX0 ((volatile u32*)(INCA_IP_IOM+ 0x00B8)) +#define INCA_IP_IOM_CIX0_CODX0 (value) (((( 1 << 4) - 1) & (value)) << 4) +#define INCA_IP_IOM_CIX0_TBA2 (1 << 3) +#define INCA_IP_IOM_CIX0_TBA1 (1 << 2) +#define INCA_IP_IOM_CIX0_TBA0 (1 << 1) +#define INCA_IP_IOM_CIX0_BAC (1 << 0) + +/***Command/Indication Receive 1***/ +#define INCA_IP_IOM_CIR1 ((volatile u32*)(INCA_IP_IOM+ 0x00BC)) +#define INCA_IP_IOM_CIR1_CODR1 (value) (((( 1 << 6) - 1) & (value)) << 2) + +/***Command/Indication Transmit 1***/ +#define INCA_IP_IOM_CIX1 ((volatile u32*)(INCA_IP_IOM+ 0x00BC)) +#define INCA_IP_IOM_CIX1_CODX1 (value) (((( 1 << 6) - 1) & (value)) << 2) +#define INCA_IP_IOM_CIX1_CICW (1 << 1) +#define INCA_IP_IOM_CIX1_CI1E (1 << 0) + +/***Controller Data Access Reg. (CH10)***/ +#define INCA_IP_IOM_CDA10 ((volatile u32*)(INCA_IP_IOM+ 0x0100)) +#define INCA_IP_IOM_CDA10_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***Controller Data Access Reg. (CH11)***/ +#define INCA_IP_IOM_CDA11 ((volatile u32*)(INCA_IP_IOM+ 0x0104)) +#define INCA_IP_IOM_CDA11_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***Controller Data Access Reg. (CH20)***/ +#define INCA_IP_IOM_CDA20 ((volatile u32*)(INCA_IP_IOM+ 0x0108)) +#define INCA_IP_IOM_CDA20_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***Controller Data Access Reg. (CH21)***/ +#define INCA_IP_IOM_CDA21 ((volatile u32*)(INCA_IP_IOM+ 0x010C)) +#define INCA_IP_IOM_CDA21_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***Time Slot and Data Port Sel. (CH10)***/ +#define INCA_IP_IOM_CDA_TSDP10 ((volatile u32*)(INCA_IP_IOM+ 0x0110)) +#define INCA_IP_IOM_CDA_TSDP10_DPS (1 << 7) +#define INCA_IP_IOM_CDA_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***Time Slot and Data Port Sel. (CH11)***/ +#define INCA_IP_IOM_CDA_TSDP11 ((volatile u32*)(INCA_IP_IOM+ 0x0114)) +#define INCA_IP_IOM_CDA_TSDP11_DPS (1 << 7) +#define INCA_IP_IOM_CDA_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***Time Slot and Data Port Sel. (CH20)***/ +#define INCA_IP_IOM_CDA_TSDP20 ((volatile u32*)(INCA_IP_IOM+ 0x0118)) +#define INCA_IP_IOM_CDA_TSDP20_DPS (1 << 7) +#define INCA_IP_IOM_CDA_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***Time Slot and Data Port Sel. (CH21)***/ +#define INCA_IP_IOM_CDA_TSDP21 ((volatile u32*)(INCA_IP_IOM+ 0x011C)) +#define INCA_IP_IOM_CDA_TSDP21_DPS (1 << 7) +#define INCA_IP_IOM_CDA_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***Time Slot and Data Port Sel. (CH10)***/ +#define INCA_IP_IOM_CO_TSDP10 ((volatile u32*)(INCA_IP_IOM+ 0x0120)) +#define INCA_IP_IOM_CO_TSDP10_DPS (1 << 7) +#define INCA_IP_IOM_CO_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***Time Slot and Data Port Sel. (CH11)***/ +#define INCA_IP_IOM_CO_TSDP11 ((volatile u32*)(INCA_IP_IOM+ 0x0124)) +#define INCA_IP_IOM_CO_TSDP11_DPS (1 << 7) +#define INCA_IP_IOM_CO_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***Time Slot and Data Port Sel. (CH20)***/ +#define INCA_IP_IOM_CO_TSDP20 ((volatile u32*)(INCA_IP_IOM+ 0x0128)) +#define INCA_IP_IOM_CO_TSDP20_DPS (1 << 7) +#define INCA_IP_IOM_CO_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***Time Slot and Data Port Sel. (CH21)***/ +#define INCA_IP_IOM_CO_TSDP21 ((volatile u32*)(INCA_IP_IOM+ 0x012C)) +#define INCA_IP_IOM_CO_TSDP21_DPS (1 << 7) +#define INCA_IP_IOM_CO_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***Ctrl. Reg. Contr. Data Access CH1x***/ +#define INCA_IP_IOM_CDA1_CR ((volatile u32*)(INCA_IP_IOM+ 0x0138)) +#define INCA_IP_IOM_CDA1_CR_EN_TBM (1 << 5) +#define INCA_IP_IOM_CDA1_CR_EN_I1 (1 << 4) +#define INCA_IP_IOM_CDA1_CR_EN_I0 (1 << 3) +#define INCA_IP_IOM_CDA1_CR_EN_O1 (1 << 2) +#define INCA_IP_IOM_CDA1_CR_EN_O0 (1 << 1) +#define INCA_IP_IOM_CDA1_CR_SWAP (1 << 0) + +/***Ctrl. Reg. Contr. Data Access CH1x***/ +#define INCA_IP_IOM_CDA2_CR ((volatile u32*)(INCA_IP_IOM+ 0x013C)) +#define INCA_IP_IOM_CDA2_CR_EN_TBM (1 << 5) +#define INCA_IP_IOM_CDA2_CR_EN_I1 (1 << 4) +#define INCA_IP_IOM_CDA2_CR_EN_I0 (1 << 3) +#define INCA_IP_IOM_CDA2_CR_EN_O1 (1 << 2) +#define INCA_IP_IOM_CDA2_CR_EN_O0 (1 << 1) +#define INCA_IP_IOM_CDA2_CR_SWAP (1 << 0) + +/***Control Register B-Channel Data***/ +#define INCA_IP_IOM_BCHA_CR ((volatile u32*)(INCA_IP_IOM+ 0x0144)) +#define INCA_IP_IOM_BCHA_CR_EN_BC2 (1 << 4) +#define INCA_IP_IOM_BCHA_CR_EN_BC1 (1 << 3) + +/***Control Register B-Channel Data***/ +#define INCA_IP_IOM_BCHB_CR ((volatile u32*)(INCA_IP_IOM+ 0x0148)) +#define INCA_IP_IOM_BCHB_CR_EN_BC2 (1 << 4) +#define INCA_IP_IOM_BCHB_CR_EN_BC1 (1 << 3) + +/***Control Reg. for HDLC and CI1 Data***/ +#define INCA_IP_IOM_DCI_CR ((volatile u32*)(INCA_IP_IOM+ 0x014C)) +#define INCA_IP_IOM_DCI_CR_DPS_CI1 (1 << 7) +#define INCA_IP_IOM_DCI_CR_EN_CI1 (1 << 6) +#define INCA_IP_IOM_DCI_CR_EN_D (1 << 5) + +/***Control Reg. for HDLC and CI1 Data***/ +#define INCA_IP_IOM_DCIC_CR ((volatile u32*)(INCA_IP_IOM+ 0x014C)) +#define INCA_IP_IOM_DCIC_CR_DPS_CI0 (1 << 7) +#define INCA_IP_IOM_DCIC_CR_EN_CI0 (1 << 6) +#define INCA_IP_IOM_DCIC_CR_DPS_D (1 << 5) + +/***Control Reg. Serial Data Strobe x***/ +#define INCA_IP_IOM_SDS_CR ((volatile u32*)(INCA_IP_IOM+ 0x0154)) +#define INCA_IP_IOM_SDS_CR_ENS_TSS (1 << 7) +#define INCA_IP_IOM_SDS_CR_ENS_TSS_1 (1 << 6) +#define INCA_IP_IOM_SDS_CR_ENS_TSS_3 (1 << 5) +#define INCA_IP_IOM_SDS_CR_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***Control Register IOM Data***/ +#define INCA_IP_IOM_IOM_CR ((volatile u32*)(INCA_IP_IOM+ 0x015C)) +#define INCA_IP_IOM_IOM_CR_SPU (1 << 7) +#define INCA_IP_IOM_IOM_CR_CI_CS (1 << 5) +#define INCA_IP_IOM_IOM_CR_TIC_DIS (1 << 4) +#define INCA_IP_IOM_IOM_CR_EN_BCL (1 << 3) +#define INCA_IP_IOM_IOM_CR_CLKM (1 << 2) +#define INCA_IP_IOM_IOM_CR_Res (1 << 1) +#define INCA_IP_IOM_IOM_CR_DIS_IOM (1 << 0) + +/***Synchronous Transfer Interrupt***/ +#define INCA_IP_IOM_STI ((volatile u32*)(INCA_IP_IOM+ 0x0160)) +#define INCA_IP_IOM_STI_STOV21 (1 << 7) +#define INCA_IP_IOM_STI_STOV20 (1 << 6) +#define INCA_IP_IOM_STI_STOV11 (1 << 5) +#define INCA_IP_IOM_STI_STOV10 (1 << 4) +#define INCA_IP_IOM_STI_STI21 (1 << 3) +#define INCA_IP_IOM_STI_STI20 (1 << 2) +#define INCA_IP_IOM_STI_STI11 (1 << 1) +#define INCA_IP_IOM_STI_STI10 (1 << 0) + +/***Acknowledge Synchronous Transfer Interrupt***/ +#define INCA_IP_IOM_ASTI ((volatile u32*)(INCA_IP_IOM+ 0x0160)) +#define INCA_IP_IOM_ASTI_ACK21 (1 << 3) +#define INCA_IP_IOM_ASTI_ACK20 (1 << 2) +#define INCA_IP_IOM_ASTI_ACK11 (1 << 1) +#define INCA_IP_IOM_ASTI_ACK10 (1 << 0) + +/***Mask Synchronous Transfer Interrupt***/ +#define INCA_IP_IOM_MSTI ((volatile u32*)(INCA_IP_IOM+ 0x0164)) +#define INCA_IP_IOM_MSTI_STOV21 (1 << 7) +#define INCA_IP_IOM_MSTI_STOV20 (1 << 6) +#define INCA_IP_IOM_MSTI_STOV11 (1 << 5) +#define INCA_IP_IOM_MSTI_STOV10 (1 << 4) +#define INCA_IP_IOM_MSTI_STI21 (1 << 3) +#define INCA_IP_IOM_MSTI_STI20 (1 << 2) +#define INCA_IP_IOM_MSTI_STI11 (1 << 1) +#define INCA_IP_IOM_MSTI_STI10 (1 << 0) + +/***Configuration Register for Serial Data Strobes***/ +#define INCA_IP_IOM_SDS_CONF ((volatile u32*)(INCA_IP_IOM+ 0x0168)) +#define INCA_IP_IOM_SDS_CONF_SDS_BCL (1 << 0) + +/***Monitoring CDA Bits***/ +#define INCA_IP_IOM_MCDA ((volatile u32*)(INCA_IP_IOM+ 0x016C)) +#define INCA_IP_IOM_MCDA_MCDA21 (value) (((( 1 << 2) - 1) & (value)) << 6) +#define INCA_IP_IOM_MCDA_MCDA20 (value) (((( 1 << 2) - 1) & (value)) << 4) +#define INCA_IP_IOM_MCDA_MCDA11 (value) (((( 1 << 2) - 1) & (value)) << 2) +#define INCA_IP_IOM_MCDA_MCDA10 (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***********************************************************************/ +/* Module : ASC register address and bits */ +/***********************************************************************/ + +#if defined(CONFIG_INCA_IP) +#define INCA_IP_ASC (0xB8000400) +#elif defined(CONFIG_PURPLE) +#define INCA_IP_ASC (0xBE500000) +#endif + +/***********************************************************************/ + + +/***ASC Port Input Select Register***/ +#define INCA_IP_ASC_ASC_PISEL ((volatile u32*)(INCA_IP_ASC+ 0x0004)) +#define INCA_IP_ASC_ASC_PISEL_RIS (1 << 0) + +/***ASC Control Register***/ +#define INCA_IP_ASC_ASC_CON ((volatile u32*)(INCA_IP_ASC+ 0x0010)) +#define INCA_IP_ASC_ASC_CON_R (1 << 15) +#define INCA_IP_ASC_ASC_CON_LB (1 << 14) +#define INCA_IP_ASC_ASC_CON_BRS (1 << 13) +#define INCA_IP_ASC_ASC_CON_ODD (1 << 12) +#define INCA_IP_ASC_ASC_CON_FDE (1 << 11) +#define INCA_IP_ASC_ASC_CON_OE (1 << 10) +#define INCA_IP_ASC_ASC_CON_FE (1 << 9) +#define INCA_IP_ASC_ASC_CON_PE (1 << 8) +#define INCA_IP_ASC_ASC_CON_OEN (1 << 7) +#define INCA_IP_ASC_ASC_CON_FEN (1 << 6) +#define INCA_IP_ASC_ASC_CON_PENRXDI (1 << 5) +#define INCA_IP_ASC_ASC_CON_REN (1 << 4) +#define INCA_IP_ASC_ASC_CON_STP (1 << 3) +#define INCA_IP_ASC_ASC_CON_M (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***ASC Write Hardware Modified Control Register***/ +#define INCA_IP_ASC_ASC_WHBCON ((volatile u32*)(INCA_IP_ASC+ 0x0050)) +#define INCA_IP_ASC_ASC_WHBCON_SETOE (1 << 13) +#define INCA_IP_ASC_ASC_WHBCON_SETFE (1 << 12) +#define INCA_IP_ASC_ASC_WHBCON_SETPE (1 << 11) +#define INCA_IP_ASC_ASC_WHBCON_CLROE (1 << 10) +#define INCA_IP_ASC_ASC_WHBCON_CLRFE (1 << 9) +#define INCA_IP_ASC_ASC_WHBCON_CLRPE (1 << 8) +#define INCA_IP_ASC_ASC_WHBCON_SETREN (1 << 5) +#define INCA_IP_ASC_ASC_WHBCON_CLRREN (1 << 4) + +/***ASC Baudrate Timer/Reload Register***/ +#define INCA_IP_ASC_ASC_BTR ((volatile u32*)(INCA_IP_ASC+ 0x0014)) +#define INCA_IP_ASC_ASC_BTR_BR_VALUE (value) (((( 1 << 13) - 1) & (value)) << 0) + +/***ASC Fractional Divider Register***/ +#define INCA_IP_ASC_ASC_FDV ((volatile u32*)(INCA_IP_ASC+ 0x0018)) +#define INCA_IP_ASC_ASC_FDV_FD_VALUE (value) (((( 1 << 9) - 1) & (value)) << 0) + +/***ASC IrDA Pulse Mode/Width Register***/ +#define INCA_IP_ASC_ASC_PMW ((volatile u32*)(INCA_IP_ASC+ 0x001C)) +#define INCA_IP_ASC_ASC_PMW_IRPW (1 << 8) +#define INCA_IP_ASC_ASC_PMW_PW_VALUE (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***ASC Transmit Buffer Register***/ +#define INCA_IP_ASC_ASC_TBUF ((volatile u32*)(INCA_IP_ASC+ 0x0020)) +#define INCA_IP_ASC_ASC_TBUF_TD_VALUE (value) (((( 1 << 9) - 1) & (value)) << 0) + +/***ASC Receive Buffer Register***/ +#define INCA_IP_ASC_ASC_RBUF ((volatile u32*)(INCA_IP_ASC+ 0x0024)) +#define INCA_IP_ASC_ASC_RBUF_RD_VALUE (value) (((( 1 << 9) - 1) & (value)) << 0) + +/***ASC Autobaud Control Register***/ +#define INCA_IP_ASC_ASC_ABCON ((volatile u32*)(INCA_IP_ASC+ 0x0030)) +#define INCA_IP_ASC_ASC_ABCON_RXINV (1 << 11) +#define INCA_IP_ASC_ASC_ABCON_TXINV (1 << 10) +#define INCA_IP_ASC_ASC_ABCON_ABEM (value) (((( 1 << 2) - 1) & (value)) << 8) +#define INCA_IP_ASC_ASC_ABCON_FCDETEN (1 << 4) +#define INCA_IP_ASC_ASC_ABCON_ABDETEN (1 << 3) +#define INCA_IP_ASC_ASC_ABCON_ABSTEN (1 << 2) +#define INCA_IP_ASC_ASC_ABCON_AUREN (1 << 1) +#define INCA_IP_ASC_ASC_ABCON_ABEN (1 << 0) + +/***Receive FIFO Control Register***/ +#define INCA_IP_ASC_RXFCON ((volatile u32*)(INCA_IP_ASC+ 0x0040)) +#define INCA_IP_ASC_RXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8) +#define INCA_IP_ASC_RXFCON_RXTMEN (1 << 2) +#define INCA_IP_ASC_RXFCON_RXFFLU (1 << 1) +#define INCA_IP_ASC_RXFCON_RXFEN (1 << 0) + +/***Transmit FIFO Control Register***/ +#define INCA_IP_ASC_TXFCON ((volatile u32*)(INCA_IP_ASC+ 0x0044)) +#define INCA_IP_ASC_TXFCON_TXFITL (value) (((( 1 << 6) - 1) & (value)) << 8) +#define INCA_IP_ASC_TXFCON_TXTMEN (1 << 2) +#define INCA_IP_ASC_TXFCON_TXFFLU (1 << 1) +#define INCA_IP_ASC_TXFCON_TXFEN (1 << 0) + +/***FIFO Status Register***/ +#define INCA_IP_ASC_FSTAT ((volatile u32*)(INCA_IP_ASC+ 0x0048)) +#define INCA_IP_ASC_FSTAT_TXFFL (value) (((( 1 << 6) - 1) & (value)) << 8) +#define INCA_IP_ASC_FSTAT_RXFFL (value) (((( 1 << 6) - 1) & (value)) << 0) + +/***ASC Write HW Modified Autobaud Control Register***/ +#define INCA_IP_ASC_ASC_WHBABCON ((volatile u32*)(INCA_IP_ASC+ 0x0054)) +#define INCA_IP_ASC_ASC_WHBABCON_SETABEN (1 << 1) +#define INCA_IP_ASC_ASC_WHBABCON_CLRABEN (1 << 0) + +/***ASC Autobaud Status Register***/ +#define INCA_IP_ASC_ASC_ABSTAT ((volatile u32*)(INCA_IP_ASC+ 0x0034)) +#define INCA_IP_ASC_ASC_ABSTAT_DETWAIT (1 << 4) +#define INCA_IP_ASC_ASC_ABSTAT_SCCDET (1 << 3) +#define INCA_IP_ASC_ASC_ABSTAT_SCSDET (1 << 2) +#define INCA_IP_ASC_ASC_ABSTAT_FCCDET (1 << 1) +#define INCA_IP_ASC_ASC_ABSTAT_FCSDET (1 << 0) + +/***ASC Write HW Modified Autobaud Status Register***/ +#define INCA_IP_ASC_ASC_WHBABSTAT ((volatile u32*)(INCA_IP_ASC+ 0x0058)) +#define INCA_IP_ASC_ASC_WHBABSTAT_SETDETWAIT (1 << 9) +#define INCA_IP_ASC_ASC_WHBABSTAT_CLRDETWAIT (1 << 8) +#define INCA_IP_ASC_ASC_WHBABSTAT_SETSCCDET (1 << 7) +#define INCA_IP_ASC_ASC_WHBABSTAT_CLRSCCDET (1 << 6) +#define INCA_IP_ASC_ASC_WHBABSTAT_SETSCSDET (1 << 5) +#define INCA_IP_ASC_ASC_WHBABSTAT_CLRSCSDET (1 << 4) +#define INCA_IP_ASC_ASC_WHBABSTAT_SETFCCDET (1 << 3) +#define INCA_IP_ASC_ASC_WHBABSTAT_CLRFCCDET (1 << 2) +#define INCA_IP_ASC_ASC_WHBABSTAT_SETFCSDET (1 << 1) +#define INCA_IP_ASC_ASC_WHBABSTAT_CLRFCSDET (1 << 0) + +/***ASC Clock Control Register***/ +#define INCA_IP_ASC_ASC_CLC ((volatile u32*)(INCA_IP_ASC+ 0x0000)) +#define INCA_IP_ASC_ASC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8) +#define INCA_IP_ASC_ASC_CLC_DISS (1 << 1) +#define INCA_IP_ASC_ASC_CLC_DISR (1 << 0) + +/***********************************************************************/ +/* Module : DMA register address and bits */ +/***********************************************************************/ + +#define INCA_IP_DMA (0xBF108000) +/***********************************************************************/ + + +/***DMA RX Channel 0 Command Register***/ +#define INCA_IP_DMA_DMA_RXCCR0 ((volatile u32*)(INCA_IP_DMA+ 0x0800)) +#define INCA_IP_DMA_DMA_RXCCR0_LBE (1 << 31) +#define INCA_IP_DMA_DMA_RXCCR0_HPEN (1 << 30) +#define INCA_IP_DMA_DMA_RXCCR0_INIT (1 << 2) +#define INCA_IP_DMA_DMA_RXCCR0_OFF (1 << 1) +#define INCA_IP_DMA_DMA_RXCCR0_HR (1 << 0) + +/***DMA RX Channel 1 Command Register***/ +#define INCA_IP_DMA_DMA_RXCCR1 ((volatile u32*)(INCA_IP_DMA+ 0x0804)) +#define INCA_IP_DMA_DMA_RXCCR1_LBE (1 << 31) +#define INCA_IP_DMA_DMA_RXCCR1_HPEN (1 << 30) +#define INCA_IP_DMA_DMA_RXCCR1_INIT (1 << 2) +#define INCA_IP_DMA_DMA_RXCCR1_OFF (1 << 1) +#define INCA_IP_DMA_DMA_RXCCR1_HR (1 << 0) + +/***DMA Receive Interrupt Status Register***/ +#define INCA_IP_DMA_DMA_RXISR ((volatile u32*)(INCA_IP_DMA+ 0x0808)) +#define INCA_IP_DMA_DMA_RXISR_RDERRx (value) (((( 1 << 2) - 1) & (value)) << 8) +#define INCA_IP_DMA_DMA_RXISR_CMDCPTx (value) (((( 1 << 2) - 1) & (value)) << 6) +#define INCA_IP_DMA_DMA_RXISR_EOPx (value) (((( 1 << 2) - 1) & (value)) << 4) +#define INCA_IP_DMA_DMA_RXISR_CPTx (value) (((( 1 << 2) - 1) & (value)) << 2) +#define INCA_IP_DMA_DMA_RXISR_HLDx (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***DMA Receive Interrupt Mask Register***/ +#define INCA_IP_DMA_DMA_RXIMR ((volatile u32*)(INCA_IP_DMA+ 0x080C)) +#define INCA_IP_DMA_DMA_RXIMR_RDERRx (value) (((( 1 << 2) - 1) & (value)) << 8) +#define INCA_IP_DMA_DMA_RXIMR_CMDCPTx (value) (((( 1 << 2) - 1) & (value)) << 6) +#define INCA_IP_DMA_DMA_RXIMR_EOPx (value) (((( 1 << 2) - 1) & (value)) << 4) +#define INCA_IP_DMA_DMA_RXIMR_CPTx (value) (((( 1 << 2) - 1) & (value)) << 2) +#define INCA_IP_DMA_DMA_RXIMR_HLDx (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***DMA First Receive Descriptor Addr. for Rx Channel 0 +***/ +#define INCA_IP_DMA_DMA_RXFRDA0 ((volatile u32*)(INCA_IP_DMA+ 0x0810)) +#define INCA_IP_DMA_DMA_RXFRDA0_RXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0) + +/***DMA First Receive Descriptor Addr. for Rx Channel 1 +***/ +#define INCA_IP_DMA_DMA_RXFRDA1 ((volatile u32*)(INCA_IP_DMA+ 0x0814)) +#define INCA_IP_DMA_DMA_RXFRDA1_RXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0) + +/***DMA Receive Channel Polling Time***/ +#define INCA_IP_DMA_DMA_RXPOLL ((volatile u32*)(INCA_IP_DMA+ 0x0818)) +#define INCA_IP_DMA_DMA_RXPOLL_BSZ1 (value) (((( 1 << 2) - 1) & (value)) << 30) +#define INCA_IP_DMA_DMA_RXPOLL_BSZ0 (value) (((( 1 << 2) - 1) & (value)) << 28) +#define INCA_IP_DMA_DMA_RXPOLL_RXPOLLTIME (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***DMA TX Channel 0 Command Register (Voice Port)***/ +#define INCA_IP_DMA_DMA_TXCCR0 ((volatile u32*)(INCA_IP_DMA+ 0x0880)) +#define INCA_IP_DMA_DMA_TXCCR0_LBE (1 << 31) +#define INCA_IP_DMA_DMA_TXCCR0_HPEN (1 << 30) +#define INCA_IP_DMA_DMA_TXCCR0_HR (1 << 2) +#define INCA_IP_DMA_DMA_TXCCR0_OFF (1 << 1) +#define INCA_IP_DMA_DMA_TXCCR0_INIT (1 << 0) + +/***DMA TX Channel 1 Command Register (Mangmt Port)***/ +#define INCA_IP_DMA_DMA_TXCCR1 ((volatile u32*)(INCA_IP_DMA+ 0x0884)) +#define INCA_IP_DMA_DMA_TXCCR1_LBE (1 << 31) +#define INCA_IP_DMA_DMA_TXCCR1_HPEN (1 << 30) +#define INCA_IP_DMA_DMA_TXCCR1_HR (1 << 2) +#define INCA_IP_DMA_DMA_TXCCR1_OFF (1 << 1) +#define INCA_IP_DMA_DMA_TXCCR1_INIT (1 << 0) + +/***DMA TX Channel 2 Command Register (SSC Port)***/ +#define INCA_IP_DMA_DMA_TXCCR2 ((volatile u32*)(INCA_IP_DMA+ 0x0888)) +#define INCA_IP_DMA_DMA_TXCCR2_LBE (1 << 31) +#define INCA_IP_DMA_DMA_TXCCR2_HPEN (1 << 30) +#define INCA_IP_DMA_DMA_TXCCR2_HBF (1 << 29) +#define INCA_IP_DMA_DMA_TXCCR2_HR (1 << 2) +#define INCA_IP_DMA_DMA_TXCCR2_OFF (1 << 1) +#define INCA_IP_DMA_DMA_TXCCR2_INIT (1 << 0) + +/***DMA First Receive Descriptor Addr. for Tx Channel 0 +***/ +#define INCA_IP_DMA_DMA_TXFRDA0 ((volatile u32*)(INCA_IP_DMA+ 0x08A0)) +#define INCA_IP_DMA_DMA_TXFRDA0_TXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0) + +/***DMA First Receive Descriptor Addr. for Tx Channel 1 +***/ +#define INCA_IP_DMA_DMA_TXFRDA1 ((volatile u32*)(INCA_IP_DMA+ 0x08A4)) +#define INCA_IP_DMA_DMA_TXFRDA1_TXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0) + +/***DMA First Receive Descriptor Addr. for Tx Channel 2 +***/ +#define INCA_IP_DMA_DMA_TXFRDA2 ((volatile u32*)(INCA_IP_DMA+ 0x08A8)) +#define INCA_IP_DMA_DMA_TXFRDA2_TXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0) + +/***DMA Transmit Channel Arbitration Register***/ +#define INCA_IP_DMA_DMA_TXWGT ((volatile u32*)(INCA_IP_DMA+ 0x08C0)) +#define INCA_IP_DMA_DMA_TXWGT_TX2PR (value) (((( 1 << 2) - 1) & (value)) << 4) +#define INCA_IP_DMA_DMA_TXWGT_TX1PRI (value) (((( 1 << 2) - 1) & (value)) << 2) +#define INCA_IP_DMA_DMA_TXWGT_TX0PRI (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***DMA Transmit Channel Polling Time***/ +#define INCA_IP_DMA_DMA_TXPOLL ((volatile u32*)(INCA_IP_DMA+ 0x08C4)) +#define INCA_IP_DMA_DMA_TXPOLL_BSZ2 (value) (((( 1 << 2) - 1) & (value)) << 30) +#define INCA_IP_DMA_DMA_TXPOLL_BSZ1 (value) (((( 1 << 2) - 1) & (value)) << 28) +#define INCA_IP_DMA_DMA_TXPOLL_BSZ0 (value) (((( 1 << 2) - 1) & (value)) << 26) +#define INCA_IP_DMA_DMA_TXPOLL_TXPOLLTIME (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***DMA Transmit Interrupt Status Register***/ +#define INCA_IP_DMA_DMA_TXISR ((volatile u32*)(INCA_IP_DMA+ 0x08C8)) +#define INCA_IP_DMA_DMA_TXISR_RDERRx (value) (((( 1 << 3) - 1) & (value)) << 12) +#define INCA_IP_DMA_DMA_TXISR_HLDx (value) (((( 1 << 3) - 1) & (value)) << 9) +#define INCA_IP_DMA_DMA_TXISR_CPTx (value) (((( 1 << 3) - 1) & (value)) << 6) +#define INCA_IP_DMA_DMA_TXISR_EOPx (value) (((( 1 << 3) - 1) & (value)) << 3) +#define INCA_IP_DMA_DMA_TXISR_CMDCPTx (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***DMA Transmit Interrupt Mask Register***/ +#define INCA_IP_DMA_DMA_TXIMR ((volatile u32*)(INCA_IP_DMA+ 0x08CC)) +#define INCA_IP_DMA_DMA_TXIMR_RDERRx (value) (((( 1 << 3) - 1) & (value)) << 12) +#define INCA_IP_DMA_DMA_TXIMR_HLDx (value) (((( 1 << 3) - 1) & (value)) << 9) +#define INCA_IP_DMA_DMA_TXIMR_CPTx (value) (((( 1 << 3) - 1) & (value)) << 6) +#define INCA_IP_DMA_DMA_TXIMR_EOPx (value) (((( 1 << 3) - 1) & (value)) << 3) +#define INCA_IP_DMA_DMA_TXIMR_CMDCPTx (value) (((( 1 << 3) - 1) & (value)) << 0) + +/***********************************************************************/ +/* Module : Debug register address and bits */ +/***********************************************************************/ + +#define INCA_IP_Debug (0xBF106000) +/***********************************************************************/ + + +/***MCD Break Bus Switch Register***/ +#define INCA_IP_Debug_MCD_BBS ((volatile u32*)(INCA_IP_Debug+ 0x0000)) +#define INCA_IP_Debug_MCD_BBS_BTP1 (1 << 19) +#define INCA_IP_Debug_MCD_BBS_BTP0 (1 << 18) +#define INCA_IP_Debug_MCD_BBS_BSP1 (1 << 17) +#define INCA_IP_Debug_MCD_BBS_BSP0 (1 << 16) +#define INCA_IP_Debug_MCD_BBS_BT5EN (1 << 15) +#define INCA_IP_Debug_MCD_BBS_BT4EN (1 << 14) +#define INCA_IP_Debug_MCD_BBS_BT5 (1 << 13) +#define INCA_IP_Debug_MCD_BBS_BT4 (1 << 12) +#define INCA_IP_Debug_MCD_BBS_BS5EN (1 << 7) +#define INCA_IP_Debug_MCD_BBS_BS4EN (1 << 6) +#define INCA_IP_Debug_MCD_BBS_BS5 (1 << 5) +#define INCA_IP_Debug_MCD_BBS_BS4 (1 << 4) + +/***MCD Multiplexer Control Register***/ +#define INCA_IP_Debug_MCD_MCR ((volatile u32*)(INCA_IP_Debug+ 0x0008)) +#define INCA_IP_Debug_MCD_MCR_MUX5 (1 << 4) +#define INCA_IP_Debug_MCD_MCR_MUX4 (1 << 3) +#define INCA_IP_Debug_MCD_MCR_MUX1 (1 << 0) + +/***********************************************************************/ +/* Module : TSF register address and bits */ +/***********************************************************************/ + +#define INCA_IP_TSF (0xB8000900) +/***********************************************************************/ + + +/***TSF Configuration Register (0000H)***/ +#define INCA_IP_TSF_TSF_CONF ((volatile u32*)(INCA_IP_TSF+ 0x0000)) +#define INCA_IP_TSF_TSF_CONF_PWMEN (1 << 2) +#define INCA_IP_TSF_TSF_CONF_LEDEN (1 << 1) +#define INCA_IP_TSF_TSF_CONF_KEYEN (1 << 0) + +/***Key scan Configuration Register (0004H)***/ +#define INCA_IP_TSF_KEY_CONF ((volatile u32*)(INCA_IP_TSF+ 0x0004)) +#define INCA_IP_TSF_KEY_CONF_SL (value) (((( 1 << 4) - 1) & (value)) << 0) + +/***Scan Register Line 0 and 1 (0008H)***/ +#define INCA_IP_TSF_SREG01 ((volatile u32*)(INCA_IP_TSF+ 0x0008)) +#define INCA_IP_TSF_SREG01_RES1x (value) (((( 1 << 12) - 1) & (value)) << 16) +#define INCA_IP_TSF_SREG01_RES0x (value) (((( 1 << 13) - 1) & (value)) << 0) + +/***Scan Register Line 2 and 3 (000CH)***/ +#define INCA_IP_TSF_SREG23 ((volatile u32*)(INCA_IP_TSF+ 0x000C)) +#define INCA_IP_TSF_SREG23_RES3x (value) (((( 1 << 10) - 1) & (value)) << 16) +#define INCA_IP_TSF_SREG23_RES2x (value) (((( 1 << 11) - 1) & (value)) << 0) + +/***Scan Register Line 4, 5 and 6 (0010H)***/ +#define INCA_IP_TSF_SREG456 ((volatile u32*)(INCA_IP_TSF+ 0x0010)) +#define INCA_IP_TSF_SREG456_RES6x (value) (((( 1 << 7) - 1) & (value)) << 24) +#define INCA_IP_TSF_SREG456_RES5x (value) (((( 1 << 8) - 1) & (value)) << 16) +#define INCA_IP_TSF_SREG456_RES4x (value) (((( 1 << 9) - 1) & (value)) << 0) + +/***Scan Register Line 7 to 12 (0014H)***/ +#define INCA_IP_TSF_SREG7to12 ((volatile u32*)(INCA_IP_TSF+ 0x0014)) +#define INCA_IP_TSF_SREG7to12_RES12x (1 << 28) +#define INCA_IP_TSF_SREG7to12_RES11x (value) (((( 1 << 2) - 1) & (value)) << 24) +#define INCA_IP_TSF_SREG7to12_RES10x (value) (((( 1 << 3) - 1) & (value)) << 20) +#define INCA_IP_TSF_SREG7to12_RES9x (value) (((( 1 << 4) - 1) & (value)) << 16) +#define INCA_IP_TSF_SREG7to12_RES8x (value) (((( 1 << 5) - 1) & (value)) << 8) +#define INCA_IP_TSF_SREG7to12_RES7x (value) (((( 1 << 6) - 1) & (value)) << 0) + +/***LEDMUX Configuration Register (0018H)***/ +#define INCA_IP_TSF_LEDMUX_CONF ((volatile u32*)(INCA_IP_TSF+ 0x0018)) +#define INCA_IP_TSF_LEDMUX_CONF_ETL1 (1 << 25) +#define INCA_IP_TSF_LEDMUX_CONF_ESTA1 (1 << 24) +#define INCA_IP_TSF_LEDMUX_CONF_EDPX1 (1 << 23) +#define INCA_IP_TSF_LEDMUX_CONF_EACT1 (1 << 22) +#define INCA_IP_TSF_LEDMUX_CONF_ESPD1 (1 << 21) +#define INCA_IP_TSF_LEDMUX_CONF_ETL0 (1 << 20) +#define INCA_IP_TSF_LEDMUX_CONF_ESTA0 (1 << 19) +#define INCA_IP_TSF_LEDMUX_CONF_EDPX0 (1 << 18) +#define INCA_IP_TSF_LEDMUX_CONF_EACT0 (1 << 17) +#define INCA_IP_TSF_LEDMUX_CONF_ESPD0 (1 << 16) +#define INCA_IP_TSF_LEDMUX_CONF_INV (1 << 1) +#define INCA_IP_TSF_LEDMUX_CONF_NCOL (1 << 0) + +/***LED Register (001CH)***/ +#define INCA_IP_TSF_LED_REG ((volatile u32*)(INCA_IP_TSF+ 0x001C)) +#define INCA_IP_TSF_LED_REG_Lxy (value) (((( 1 << 24) - 1) & (value)) << 0) + +/***Pulse Width Modulator 1 and 2 Register (0020H)***/ +#define INCA_IP_TSF_PWM12 ((volatile u32*)(INCA_IP_TSF+ 0x0020)) +#define INCA_IP_TSF_PWM12_PW2PW1 (value) (((( 1 << NaN) - 1) & (value)) << NaN) + +/***********************************************************************/ +/* Module : Ports register address and bits */ +/***********************************************************************/ + +#define INCA_IP_Ports (0xB8000A00) +/***********************************************************************/ + + +/***Port 1 Data Output Register (0020H)***/ +#define INCA_IP_Ports_P1_OUT ((volatile u32*)(INCA_IP_Ports+ 0x0020)) +#define INCA_IP_Ports_P1_OUT_P(value) (1 << value) + + +/***Port 2 Data Output Register (0040H)***/ +#define INCA_IP_Ports_P2_OUT ((volatile u32*)(INCA_IP_Ports+ 0x0040)) +#define INCA_IP_Ports_P2_OUT_P(value) (1 << value) + + +/***Port 1 Data Input Register (0024H)***/ +#define INCA_IP_Ports_P1_IN ((volatile u32*)(INCA_IP_Ports+ 0x0024)) +#define INCA_IP_Ports_P1_IN_P(value) (1 << value) + + +/***Port 2 Data Input Register (0044H)***/ +#define INCA_IP_Ports_P2_IN ((volatile u32*)(INCA_IP_Ports+ 0x0044)) +#define INCA_IP_Ports_P2_IN_P(value) (1 << value) + + +/***Port 1 Direction Register (0028H)***/ +#define INCA_IP_Ports_P1_DIR ((volatile u32*)(INCA_IP_Ports+ 0x0028)) +#define INCA_IP_Ports_P1_DIR_Port1P(value) (1 << value) + +#define INCA_IP_Ports_P1_DIR_Port2Pn (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***Port 2 Direction Register (0048H)***/ +#define INCA_IP_Ports_P2_DIR ((volatile u32*)(INCA_IP_Ports+ 0x0048)) +#define INCA_IP_Ports_P2_DIR_Port1P(value) (1 << value) + +#define INCA_IP_Ports_P2_DIR_Port2Pn (value) (((( 1 << 16) - 1) & (value)) << 0) + +/***Port 0 Alternate Function Select Register 0 (000C H) +***/ +#define INCA_IP_Ports_P0_ALTSEL ((volatile u32*)(INCA_IP_Ports+ 0x000C)) +#define INCA_IP_Ports_P0_ALTSEL_Port0P(value) (1 << value) + + +/***Port 1 Alternate Function Select Register 0 (002C H) +***/ +#define INCA_IP_Ports_P1_ALTSEL ((volatile u32*)(INCA_IP_Ports+ 0x002C)) +#define INCA_IP_Ports_P1_ALTSEL_Port1P(value) (1 << value) + +#define INCA_IP_Ports_P1_ALTSEL_Port2P(value) (1 << value) + + +/***Port 2 Alternate Function Select Register 0 (004C H) +***/ +#define INCA_IP_Ports_P2_ALTSEL ((volatile u32*)(INCA_IP_Ports+ 0x004C)) +#define INCA_IP_Ports_P2_ALTSEL_Port1P(value) (1 << value) + +#define INCA_IP_Ports_P2_ALTSEL_Port2P(value) (1 << value) + + +/***Port 0 Input Schmitt-Trigger Off Register (0010 H) +***/ +#define INCA_IP_Ports_P0_STOFF ((volatile u32*)(INCA_IP_Ports+ 0x0010)) +#define INCA_IP_Ports_P0_STOFF_Port0P(value) (1 << value) + + +/***Port 1 Input Schmitt-Trigger Off Register (0030 H) +***/ +#define INCA_IP_Ports_P1_STOFF ((volatile u32*)(INCA_IP_Ports+ 0x0030)) +#define INCA_IP_Ports_P1_STOFF_Port1P(value) (1 << value) + +#define INCA_IP_Ports_P1_STOFF_Port2P(value) (1 << value) + + +/***Port 2 Input Schmitt-Trigger Off Register (0050 H) +***/ +#define INCA_IP_Ports_P2_STOFF ((volatile u32*)(INCA_IP_Ports+ 0x0050)) +#define INCA_IP_Ports_P2_STOFF_Port1P(value) (1 << value) + +#define INCA_IP_Ports_P2_STOFF_Port2P(value) (1 << value) + + +/***Port 2 Open Drain Control Register (0054H)***/ +#define INCA_IP_Ports_P2_OD ((volatile u32*)(INCA_IP_Ports+ 0x0054)) +#define INCA_IP_Ports_P2_OD_Port2P(value) (1 << value) + + +/***Port 0 Pull Up Device Enable Register (0018 H)***/ +#define INCA_IP_Ports_P0_PUDEN ((volatile u32*)(INCA_IP_Ports+ 0x0018)) +#define INCA_IP_Ports_P0_PUDEN_Port0P(value) (1 << value) + + +/***Port 2 Pull Up Device Enable Register (0058 H)***/ +#define INCA_IP_Ports_P2_PUDEN ((volatile u32*)(INCA_IP_Ports+ 0x0058)) +#define INCA_IP_Ports_P2_PUDEN_Port2P(value) (1 << value) + +#define INCA_IP_Ports_P2_PUDEN_Port2P(value) (1 << value) + + +/***Port 0 Pull Up/Pull Down Select Register (001C H)***/ +#define INCA_IP_Ports_P0_PUDSEL ((volatile u32*)(INCA_IP_Ports+ 0x001C)) +#define INCA_IP_Ports_P0_PUDSEL_Port0P(value) (1 << value) + + +/***Port 2 Pull Up/Pull Down Select Register (005C H)***/ +#define INCA_IP_Ports_P2_PUDSEL ((volatile u32*)(INCA_IP_Ports+ 0x005C)) +#define INCA_IP_Ports_P2_PUDSEL_Port2P(value) (1 << value) + +#define INCA_IP_Ports_P2_PUDSEL_Port2P(value) (1 << value) + + +/***********************************************************************/ +/* Module : DES/3DES register address and bits */ +/***********************************************************************/ + +#define INCA_IP_DES_3DES (0xB8000800) +/***********************************************************************/ + + +/***DES Input Data High Register***/ +#define INCA_IP_DES_3DES_DES_IHR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0000)) +#define INCA_IP_DES_3DES_DES_IHR_IH(value) (1 << value) + + +/***DES Input Data Low Register***/ +#define INCA_IP_DES_3DES_DES_ILR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0004)) +#define INCA_IP_DES_3DES_DES_ILR_IL(value) (1 << value) + + +/***DES Key #1 High Register***/ +#define INCA_IP_DES_3DES_DES_K1HR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0008)) +#define INCA_IP_DES_3DES_DES_K1HR_K1H(value) (1 << value) + + +/***DES Key #1 Low Register***/ +#define INCA_IP_DES_3DES_DES_K1LR ((volatile u32*)(INCA_IP_DES_3DES+ 0x000C)) +#define INCA_IP_DES_3DES_DES_K1LR_K1L(value) (1 << value) + + +/***DES Key #2 High Register***/ +#define INCA_IP_DES_3DES_DES_K2HR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0010)) +#define INCA_IP_DES_3DES_DES_K2HR_K2H(value) (1 << value) + + +/***DES Key #2 Low Register***/ +#define INCA_IP_DES_3DES_DES_K2LR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0014)) +#define INCA_IP_DES_3DES_DES_K2LR_K2L(value) (1 << value) + + +/***DES Key #3 High Register***/ +#define INCA_IP_DES_3DES_DES_K3HR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0018)) +#define INCA_IP_DES_3DES_DES_K3HR_K3H(value) (1 << value) + + +/***DES Key #3 Low Register***/ +#define INCA_IP_DES_3DES_DES_K3LR ((volatile u32*)(INCA_IP_DES_3DES+ 0x001C)) +#define INCA_IP_DES_3DES_DES_K3LR_K3L(value) (1 << value) + + +/***DES Initialization Vector High Register***/ +#define INCA_IP_DES_3DES_DES_IVHR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0020)) +#define INCA_IP_DES_3DES_DES_IVHR_IVH(value) (1 << value) + + +/***DES Initialization Vector Low Register***/ +#define INCA_IP_DES_3DES_DES_IVLR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0024)) +#define INCA_IP_DES_3DES_DES_IVLR_IVL(value) (1 << value) + + +/***DES Control Register***/ +#define INCA_IP_DES_3DES_DES_CONTROLR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0028)) +#define INCA_IP_DES_3DES_DES_CONTROLR_KRE (1 << 31) +#define INCA_IP_DES_3DES_DES_CONTROLR_DAU (1 << 16) +#define INCA_IP_DES_3DES_DES_CONTROLR_F(value) (1 << value) + +#define INCA_IP_DES_3DES_DES_CONTROLR_O(value) (1 << value) + +#define INCA_IP_DES_3DES_DES_CONTROLR_GO (1 << 8) +#define INCA_IP_DES_3DES_DES_CONTROLR_STP (1 << 7) +#define INCA_IP_DES_3DES_DES_CONTROLR_IEN (1 << 6) +#define INCA_IP_DES_3DES_DES_CONTROLR_BUS (1 << 5) +#define INCA_IP_DES_3DES_DES_CONTROLR_SM (1 << 4) +#define INCA_IP_DES_3DES_DES_CONTROLR_E_D (1 << 3) +#define INCA_IP_DES_3DES_DES_CONTROLR_M(value) (1 << value) + + +/***DES Output Data High Register***/ +#define INCA_IP_DES_3DES_DES_OHR ((volatile u32*)(INCA_IP_DES_3DES+ 0x002C)) +#define INCA_IP_DES_3DES_DES_OHR_OH(value) (1 << value) + + +/***DES Output Data Low Register***/ +#define INCA_IP_DES_3DES_DES_OLR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0030)) +#define INCA_IP_DES_3DES_DES_OLR_OL(value) (1 << value) + + +/***********************************************************************/ +/* Module : AES register address and bits */ +/***********************************************************************/ + +#define INCA_IP_AES (0xB8000880) +/***********************************************************************/ + + +/***AES Input Data 3 Register***/ +#define INCA_IP_AES_AES_ID3R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_ID3R_I(value) (1 << value) + + +/***AES Input Data 2 Register***/ +#define INCA_IP_AES_AES_ID2R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_ID2R_I(value) (1 << value) + + +/***AES Input Data 1 Register***/ +#define INCA_IP_AES_AES_ID1R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_ID1R_I(value) (1 << value) + + +/***AES Input Data 0 Register***/ +#define INCA_IP_AES_AES_ID0R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_ID0R_I(value) (1 << value) + + +/***AES Output Data 3 Register***/ +#define INCA_IP_AES_AES_OD3R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_OD3R_O(value) (1 << value) + + +/***AES Output Data 2 Register***/ +#define INCA_IP_AES_AES_OD2R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_OD2R_O(value) (1 << value) + + +/***AES Output Data 1 Register***/ +#define INCA_IP_AES_AES_OD1R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_OD1R_O(value) (1 << value) + + +/***AES Output Data 0 Register***/ +#define INCA_IP_AES_AES_OD0R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_OD0R_O(value) (1 << value) + + +/***AES Key 7 Register***/ +#define INCA_IP_AES_AES_K7R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_K7R_K(value) (1 << value) + + +/***AES Key 6 Register***/ +#define INCA_IP_AES_AES_K6R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_K6R_K(value) (1 << value) + + +/***AES Key 5 Register***/ +#define INCA_IP_AES_AES_K5R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_K5R_K(value) (1 << value) + + +/***AES Key 4 Register***/ +#define INCA_IP_AES_AES_K4R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_K4R_K(value) (1 << value) + + +/***AES Key 3 Register***/ +#define INCA_IP_AES_AES_K3R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_K3R_K(value) (1 << value) + + +/***AES Key 2 Register***/ +#define INCA_IP_AES_AES_K2R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_K2R_K(value) (1 << value) + + +/***AES Key 1 Register***/ +#define INCA_IP_AES_AES_K1R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_K1R_K(value) (1 << value) + + +/***AES Key 0 Register***/ +#define INCA_IP_AES_AES_K0R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_K0R_K(value) (1 << value) + + +/***AES Initialization Vector 3 Register***/ +#define INCA_IP_AES_AES_IV3R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_IV3R_IV(value) (1 << value) + + +/***AES Initialization Vector 2 Register***/ +#define INCA_IP_AES_AES_IV2R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_IV2R_IV(value) (1 << value) + + +/***AES Initialization Vector 1 Register***/ +#define INCA_IP_AES_AES_IV1R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_IV1R_IV(value) (1 << value) + + +/***AES Initialization Vector 0 Register***/ +#define INCA_IP_AES_AES_IV0R ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_IV0R_IV (value) (((( 1 << 32) - 1) &(value)) << 0) + +/***AES Control Register***/ +#define INCA_IP_AES_AES_CONTROLR ((volatile u32*)(INCA_IP_AES+ 0x0000)) +#define INCA_IP_AES_AES_CONTROLR_KRE (1 << 31) +#define INCA_IP_AES_AES_CONTROLR_DAU (1 << 16) +#define INCA_IP_AES_AES_CONTROLR_PNK (1 << 15) +#define INCA_IP_AES_AES_CONTROLR_F(value) (1 << value) + +#define INCA_IP_AES_AES_CONTROLR_O(value) (1 << value) + +#define INCA_IP_AES_AES_CONTROLR_GO (1 << 8) +#define INCA_IP_AES_AES_CONTROLR_STP (1 << 7) +#define INCA_IP_AES_AES_CONTROLR_IEN (1 << 6) +#define INCA_IP_AES_AES_CONTROLR_BUS (1 << 5) +#define INCA_IP_AES_AES_CONTROLR_SM (1 << 4) +#define INCA_IP_AES_AES_CONTROLR_E_D (1 << 3) +#define INCA_IP_AES_AES_CONTROLR_KV (1 << 2) +#define INCA_IP_AES_AES_CONTROLR_K(value) (1 << value) + + +/***********************************************************************/ +/* Module : I²C register address and bits */ +/***********************************************************************/ + +#define INCA_IP_IIC (0xB8000700) +/***********************************************************************/ + + +/***I²C Port Input Select Register***/ +#define INCA_IP_IIC_IIC_PISEL ((volatile u32*)(INCA_IP_IIC+ 0x0004)) +#define INCA_IP_IIC_IIC_PISEL_SDAIS(value) (1 << value) + +#define INCA_IP_IIC_IIC_PISEL_SCLIS(value) (1 << value) + + +/***I²C Clock Control Register***/ +#define INCA_IP_IIC_IIC_CLC ((volatile u32*)(INCA_IP_IIC+ 0x0000)) +#define INCA_IP_IIC_IIC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8) +#define INCA_IP_IIC_IIC_CLC_DISS (1 << 1) +#define INCA_IP_IIC_IIC_CLC_DISR (1 << 0) + +/***I²C System Control Register***/ +#define INCA_IP_IIC_IIC_SYSCON_0 ((volatile u32*)(INCA_IP_IIC+ 0x0010)) +#define INCA_IP_IIC_IIC_SYSCON_0_WMEN (1 << 31) +#define INCA_IP_IIC_IIC_SYSCON_0_CI (value) (((( 1 << 2) - 1) & (value)) << 26) +#define INCA_IP_IIC_IIC_SYSCON_0_STP (1 << 25) +#define INCA_IP_IIC_IIC_SYSCON_0_IGE (1 << 24) +#define INCA_IP_IIC_IIC_SYSCON_0_TRX (1 << 23) +#define INCA_IP_IIC_IIC_SYSCON_0_INT (1 << 22) +#define INCA_IP_IIC_IIC_SYSCON_0_ACKDIS (1 << 21) +#define INCA_IP_IIC_IIC_SYSCON_0_BUM (1 << 20) +#define INCA_IP_IIC_IIC_SYSCON_0_MOD (value) (((( 1 << 2) - 1) & (value)) << 18) +#define INCA_IP_IIC_IIC_SYSCON_0_RSC (1 << 17) +#define INCA_IP_IIC_IIC_SYSCON_0_M10 (1 << 16) +#define INCA_IP_IIC_IIC_SYSCON_0_RMEN (1 << 15) +#define INCA_IP_IIC_IIC_SYSCON_0_CO (value) (((( 1 << 3) - 1) & (value)) << 8) +#define INCA_IP_IIC_IIC_SYSCON_0_IRQE (1 << 7) +#define INCA_IP_IIC_IIC_SYSCON_0_IRQP (1 << 6) +#define INCA_IP_IIC_IIC_SYSCON_0_IRQD (1 << 5) +#define INCA_IP_IIC_IIC_SYSCON_0_BB (1 << 4) +#define INCA_IP_IIC_IIC_SYSCON_0_LRB (1 << 3) +#define INCA_IP_IIC_IIC_SYSCON_0_SLA (1 << 2) +#define INCA_IP_IIC_IIC_SYSCON_0_AL (1 << 1) +#define INCA_IP_IIC_IIC_SYSCON_0_ADR (1 << 0) + +/***I²C System Control Register***/ +#define INCA_IP_IIC_IIC_SYSCON_1 ((volatile u32*)(INCA_IP_IIC+ 0x0010)) +#define INCA_IP_IIC_IIC_SYSCON_1_RM (value) (((( 1 << 8) - 1) & (value)) << 24) +#define INCA_IP_IIC_IIC_SYSCON_1_TRX (1 << 23) +#define INCA_IP_IIC_IIC_SYSCON_1_INT (1 << 22) +#define INCA_IP_IIC_IIC_SYSCON_1_ACKDIS (1 << 21) +#define INCA_IP_IIC_IIC_SYSCON_1_BUM (1 << 20) +#define INCA_IP_IIC_IIC_SYSCON_1_MOD (value) (((( 1 << 2) - 1) & (value)) << 18) +#define INCA_IP_IIC_IIC_SYSCON_1_RSC (1 << 17) +#define INCA_IP_IIC_IIC_SYSCON_1_M10 (1 << 16) +#define INCA_IP_IIC_IIC_SYSCON_1_RMEN (1 << 15) +#define INCA_IP_IIC_IIC_SYSCON_1_CO (value) (((( 1 << 3) - 1) & (value)) << 8) +#define INCA_IP_IIC_IIC_SYSCON_1_IRQE (1 << 7) +#define INCA_IP_IIC_IIC_SYSCON_1_IRQP (1 << 6) +#define INCA_IP_IIC_IIC_SYSCON_1_IRQD (1 << 5) +#define INCA_IP_IIC_IIC_SYSCON_1_BB (1 << 4) +#define INCA_IP_IIC_IIC_SYSCON_1_LRB (1 << 3) +#define INCA_IP_IIC_IIC_SYSCON_1_SLA (1 << 2) +#define INCA_IP_IIC_IIC_SYSCON_1_AL (1 << 1) +#define INCA_IP_IIC_IIC_SYSCON_1_ADR (1 << 0) + +/***I²C System Control Register***/ +#define INCA_IP_IIC_IIC_SYSCON_2 ((volatile u32*)(INCA_IP_IIC+ 0x0010)) +#define INCA_IP_IIC_IIC_SYSCON_2_WMEN (1 << 31) +#define INCA_IP_IIC_IIC_SYSCON_2_CI (value) (((( 1 << 2) - 1) & (value)) << 26) +#define INCA_IP_IIC_IIC_SYSCON_2_STP (1 << 25) +#define INCA_IP_IIC_IIC_SYSCON_2_IGE (1 << 24) +#define INCA_IP_IIC_IIC_SYSCON_2_TRX (1 << 23) +#define INCA_IP_IIC_IIC_SYSCON_2_INT (1 << 22) +#define INCA_IP_IIC_IIC_SYSCON_2_ACKDIS (1 << 21) +#define INCA_IP_IIC_IIC_SYSCON_2_BUM (1 << 20) +#define INCA_IP_IIC_IIC_SYSCON_2_MOD (value) (((( 1 << 2) - 1) & (value)) << 18) +#define INCA_IP_IIC_IIC_SYSCON_2_RSC (1 << 17) +#define INCA_IP_IIC_IIC_SYSCON_2_M10 (1 << 16) +#define INCA_IP_IIC_IIC_SYSCON_2_WM (value) (((( 1 << 8) - 1) & (value)) << 8) +#define INCA_IP_IIC_IIC_SYSCON_2_IRQE (1 << 7) +#define INCA_IP_IIC_IIC_SYSCON_2_IRQP (1 << 6) +#define INCA_IP_IIC_IIC_SYSCON_2_IRQD (1 << 5) +#define INCA_IP_IIC_IIC_SYSCON_2_BB (1 << 4) +#define INCA_IP_IIC_IIC_SYSCON_2_LRB (1 << 3) +#define INCA_IP_IIC_IIC_SYSCON_2_SLA (1 << 2) +#define INCA_IP_IIC_IIC_SYSCON_2_AL (1 << 1) +#define INCA_IP_IIC_IIC_SYSCON_2_ADR (1 << 0) + +/***I²C Write Hardware Modified System Control Register +***/ +#define INCA_IP_IIC_IIC_WHBSYSCON ((volatile u32*)(INCA_IP_IIC+ 0x0020)) +#define INCA_IP_IIC_IIC_WHBSYSCON_CLRWMEN (1 << 31) +#define INCA_IP_IIC_IIC_WHBSYSCON_SETWMEN (1 << 30) +#define INCA_IP_IIC_IIC_WHBSYSCON_SETSTP (1 << 26) +#define INCA_IP_IIC_IIC_WHBSYSCON_CLRSTP (1 << 25) +#define INCA_IP_IIC_IIC_WHBSYSCON_SETTRX (1 << 24) +#define INCA_IP_IIC_IIC_WHBSYSCON_CLRTRX (1 << 23) +#define INCA_IP_IIC_IIC_WHBSYSCON_SETACKDIS (1 << 22) +#define INCA_IP_IIC_IIC_WHBSYSCON_CLRACKDIS (1 << 21) +#define INCA_IP_IIC_IIC_WHBSYSCON_SETBUM (1 << 20) +#define INCA_IP_IIC_IIC_WHBSYSCON_CLRBUM (1 << 19) +#define INCA_IP_IIC_IIC_WHBSYSCON_SETRSC (1 << 17) +#define INCA_IP_IIC_IIC_WHBSYSCON_CLRRSC (1 << 16) +#define INCA_IP_IIC_IIC_WHBSYSCON_SETRMEN (1 << 15) +#define INCA_IP_IIC_IIC_WHBSYSCON_CLRRMEN (1 << 14) +#define INCA_IP_IIC_IIC_WHBSYSCON_SETIRQE (1 << 10) +#define INCA_IP_IIC_IIC_WHBSYSCON_SETIRQP (1 << 9) +#define INCA_IP_IIC_IIC_WHBSYSCON_SETIRQD (1 << 8) +#define INCA_IP_IIC_IIC_WHBSYSCON_CLRIRQE (1 << 7) +#define INCA_IP_IIC_IIC_WHBSYSCON_CLRIRQP (1 << 6) +#define INCA_IP_IIC_IIC_WHBSYSCON_CLRIRQD (1 << 5) +#define INCA_IP_IIC_IIC_WHBSYSCON_SETAL (1 << 2) +#define INCA_IP_IIC_IIC_WHBSYSCON_CLRAL (1 << 1) + +/***I²C Bus Control Register***/ +#define INCA_IP_IIC_IIC_BUSCON_0 ((volatile u32*)(INCA_IP_IIC+ 0x0014)) +#define INCA_IP_IIC_IIC_BUSCON_0_BRPMOD (1 << 31) +#define INCA_IP_IIC_IIC_BUSCON_0_PREDIV (value) (((( 1 << 2) - 1) & (value)) << 29) +#define INCA_IP_IIC_IIC_BUSCON_0_ICA9_0 (value) (((( 1 << 10) - 1) & (value)) << 16) +#define INCA_IP_IIC_IIC_BUSCON_0_BRP (value) (((( 1 << 8) - 1) & (value)) << 8) +#define INCA_IP_IIC_IIC_BUSCON_0_SCLEN(value) (1 << value) + +#define INCA_IP_IIC_IIC_BUSCON_0_SDAEN(value) (1 << value) + + +/***I²C Bus Control Register***/ +#define INCA_IP_IIC_IIC_BUSCON_1 ((volatile u32*)(INCA_IP_IIC+ 0x0014)) +#define INCA_IP_IIC_IIC_BUSCON_1_BRPMOD (1 << 31) +#define INCA_IP_IIC_IIC_BUSCON_1_PREDIV (value) (((( 1 << 2) - 1) & (value)) << 29) +#define INCA_IP_IIC_IIC_BUSCON_1_ICA7_1 (value) (((( 1 << 7) - 1) & (value)) << 17) +#define INCA_IP_IIC_IIC_BUSCON_1_BRP (value) (((( 1 << 8) - 1) & (value)) << 8) +#define INCA_IP_IIC_IIC_BUSCON_1_SCLEN(value) (1 << value) + +#define INCA_IP_IIC_IIC_BUSCON_1_SDAEN(value) (1 << value) + + +/***I²C Receive Transmit Buffer***/ +#define INCA_IP_IIC_IIC_RTB ((volatile u32*)(INCA_IP_IIC+ 0x0018)) +#define INCA_IP_IIC_IIC_RTB_RTB(value) (1 << value) + + +/***********************************************************************/ +/* Module : FB register address and bits */ +/***********************************************************************/ + +#define INCA_IP_FB (0xBF880000) +/***********************************************************************/ + + +/***FB Access Error Cause Register***/ +#define INCA_IP_FB_FB_ERRCAUSE ((volatile u32*)(INCA_IP_FB+ 0x0100)) +#define INCA_IP_FB_FB_ERRCAUSE_ERR (1 << 31) +#define INCA_IP_FB_FB_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16) +#define INCA_IP_FB_FB_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***FB Access Error Address Register***/ +#define INCA_IP_FB_FB_ERRADDR ((volatile u32*)(INCA_IP_FB+ 0x0108)) +#define INCA_IP_FB_FB_ERRADDR_ADDR + +/***FB Configuration Register***/ +#define INCA_IP_FB_FB_CFG ((volatile u32*)(INCA_IP_FB+ 0x0800)) +#define INCA_IP_FB_FB_CFG_SVM (1 << 0) + +/***********************************************************************/ +/* Module : SRAM register address and bits */ +/***********************************************************************/ + +#define INCA_IP_SRAM (0xBF980000) +/***********************************************************************/ + + +/***SRAM Size Register***/ +#define INCA_IP_SRAM_SRAM_SIZE ((volatile u32*)(INCA_IP_SRAM+ 0x0800)) +#define INCA_IP_SRAM_SRAM_SIZE_SIZE (value) (((( 1 << 23) - 1) & (value)) << 0) + +/***********************************************************************/ +/* Module : BIU register address and bits */ +/***********************************************************************/ + +#define INCA_IP_BIU (0xBFA80000) +/***********************************************************************/ + + +/***BIU Identification Register***/ +#define INCA_IP_BIU_BIU_ID ((volatile u32*)(INCA_IP_BIU+ 0x0000)) +#define INCA_IP_BIU_BIU_ID_ARCH (1 << 16) +#define INCA_IP_BIU_BIU_ID_ID (value) (((( 1 << 8) - 1) & (value)) << 8) +#define INCA_IP_BIU_BIU_ID_REV (value) (((( 1 << 8) - 1) & (value)) << 0) + +/***BIU Access Error Cause Register***/ +#define INCA_IP_BIU_BIU_ERRCAUSE ((volatile u32*)(INCA_IP_BIU+ 0x0100)) +#define INCA_IP_BIU_BIU_ERRCAUSE_ERR (1 << 31) +#define INCA_IP_BIU_BIU_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16) +#define INCA_IP_BIU_BIU_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0) + +/***BIU Access Error Address Register***/ +#define INCA_IP_BIU_BIU_ERRADDR ((volatile u32*)(INCA_IP_BIU+ 0x0108)) +#define INCA_IP_BIU_BIU_ERRADDR_ADDR + +/***********************************************************************/ +/* Module : ICU register address and bits */ +/***********************************************************************/ + +#define INCA_IP_ICU (0xBF101000) +/***********************************************************************/ + + +/***IM0 Interrupt Status Register***/ +#define INCA_IP_ICU_IM0_ISR ((volatile u32*)(INCA_IP_ICU+ 0x0000)) +#define INCA_IP_ICU_IM0_ISR_IR(value) (1 << value) + + +/***IM1 Interrupt Status Register***/ +#define INCA_IP_ICU_IM1_ISR ((volatile u32*)(INCA_IP_ICU+ 0x0200)) +#define INCA_IP_ICU_IM1_ISR_IR(value) (1 << value) + + +/***IM2 Interrupt Status Register***/ +#define INCA_IP_ICU_IM2_ISR ((volatile u32*)(INCA_IP_ICU+ 0x0400)) +#define INCA_IP_ICU_IM2_ISR_IR(value) (1 << value) + + +/***IM0 Interrupt Enable Register***/ +#define INCA_IP_ICU_IM0_IER ((volatile u32*)(INCA_IP_ICU+ 0x0008)) +#define INCA_IP_ICU_IM0_IER_IR(value) (1 << value) + + +/***IM1 Interrupt Enable Register***/ +#define INCA_IP_ICU_IM1_IER ((volatile u32*)(INCA_IP_ICU+ 0x0208)) +#define INCA_IP_ICU_IM1_IER_IR(value) (1 << value) + + +/***IM2 Interrupt Enable Register***/ +#define INCA_IP_ICU_IM2_IER ((volatile u32*)(INCA_IP_ICU+ 0x0408)) +#define INCA_IP_ICU_IM2_IER_IR(value) (1 << value) + + +/***IM0 Interrupt Output Status Register***/ +#define INCA_IP_ICU_IM0_IOSR ((volatile u32*)(INCA_IP_ICU+ 0x0010)) +#define INCA_IP_ICU_IM0_IOSR_IR(value) (1 << value) + + +/***IM1 Interrupt Output Status Register***/ +#define INCA_IP_ICU_IM1_IOSR ((volatile u32*)(INCA_IP_ICU+ 0x0210)) +#define INCA_IP_ICU_IM1_IOSR_IR(value) (1 << value) + + +/***IM2 Interrupt Output Status Register***/ +#define INCA_IP_ICU_IM2_IOSR ((volatile u32*)(INCA_IP_ICU+ 0x0410)) +#define INCA_IP_ICU_IM2_IOSR_IR(value) (1 << value) + + +/***IM0 Interrupt Request Set Register***/ +#define INCA_IP_ICU_IM0_IRSR ((volatile u32*)(INCA_IP_ICU+ 0x0018)) +#define INCA_IP_ICU_IM0_IRSR_IR(value) (1 << value) + + +/***IM1 Interrupt Request Set Register***/ +#define INCA_IP_ICU_IM1_IRSR ((volatile u32*)(INCA_IP_ICU+ 0x0218)) +#define INCA_IP_ICU_IM1_IRSR_IR(value) (1 << value) + + +/***IM2 Interrupt Request Set Register***/ +#define INCA_IP_ICU_IM2_IRSR ((volatile u32*)(INCA_IP_ICU+ 0x0418)) +#define INCA_IP_ICU_IM2_IRSR_IR(value) (1 << value) + + +/***External Interrupt Control Register***/ +#define INCA_IP_ICU_ICU_EICR ((volatile u32*)(INCA_IP_ICU+ 0x0B00)) +#define INCA_IP_ICU_ICU_EICR_EII5 (value) (((( 1 << 3) - 1) & (value)) << 20) +#define INCA_IP_ICU_ICU_EICR_EII4 (value) (((( 1 << 3) - 1) & (value)) << 16) +#define INCA_IP_ICU_ICU_EICR_EII3 (value) (((( 1 << 3) - 1) & (value)) << 12) +#define INCA_IP_ICU_ICU_EICR_EII2 (value) (((( 1 << 3) - 1) & (value)) << 8) +#define INCA_IP_ICU_ICU_EICR_EII1 (value) (((( 1 << 3) - 1) & (value)) << 4) +#define INCA_IP_ICU_ICU_EICR_EII0 (value) (((( 1 << 3) - 1) & (value)) << 0) diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h new file mode 100644 index 0000000000..025012ae60 --- /dev/null +++ b/arch/mips/include/asm/io.h @@ -0,0 +1,492 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995 Waldorf GmbH + * Copyright (C) 1994 - 2000 Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2000 FSMLabs, Inc. + */ +#ifndef _ASM_IO_H +#define _ASM_IO_H + +#include <linux/config.h> +#if 0 +#include <linux/pagemap.h> +#endif +#include <asm/addrspace.h> +#include <asm/byteorder.h> + +/* + * Slowdown I/O port space accesses for antique hardware. + */ +#undef CONF_SLOWDOWN_IO + +/* + * Sane hardware offers swapping of I/O space accesses in hardware; less + * sane hardware forces software to fiddle with this ... + */ +#if defined(CONFIG_SWAP_IO_SPACE) && defined(__MIPSEB__) + +#define __ioswab8(x) (x) +#define __ioswab16(x) swab16(x) +#define __ioswab32(x) swab32(x) + +#else + +#define __ioswab8(x) (x) +#define __ioswab16(x) (x) +#define __ioswab32(x) (x) + +#endif + +/* + * This file contains the definitions for the MIPS counterpart of the + * x86 in/out instructions. This heap of macros and C results in much + * better code than the approach of doing it in plain C. The macros + * result in code that is to fast for certain hardware. On the other + * side the performance of the string functions should be improved for + * sake of certain devices like EIDE disks that do highspeed polled I/O. + * + * Ralf + * + * This file contains the definitions for the x86 IO instructions + * inb/inw/inl/outb/outw/outl and the "string versions" of the same + * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" + * versions of the single-IO instructions (inb_p/inw_p/..). + * + * This file is not meant to be obfuscating: it's just complicated + * to (a) handle it all in a way that makes gcc able to optimize it + * as well as possible and (b) trying to avoid writing the same thing + * over and over again with slight variations and possibly making a + * mistake somewhere. + */ + +/* + * On MIPS I/O ports are memory mapped, so we access them using normal + * load/store instructions. mips_io_port_base is the virtual address to + * which all ports are being mapped. For sake of efficiency some code + * assumes that this is an address that can be loaded with a single lui + * instruction, so the lower 16 bits must be zero. Should be true on + * on any sane architecture; generic code does not use this assumption. + */ +extern const unsigned long mips_io_port_base; + +/* + * Gcc will generate code to load the value of mips_io_port_base after each + * function call which may be fairly wasteful in some cases. So we don't + * play quite by the book. We tell gcc mips_io_port_base is a long variable + * which solves the code generation issue. Now we need to violate the + * aliasing rules a little to make initialization possible and finally we + * will need the barrier() to fight side effects of the aliasing chat. + * This trickery will eventually collapse under gcc's optimizer. Oh well. + */ +static inline void set_io_port_base(unsigned long base) +{ + * (unsigned long *) &mips_io_port_base = base; +} + +/* + * Thanks to James van Artsdalen for a better timing-fix than + * the two short jumps: using outb's to a nonexistent port seems + * to guarantee better timings even on fast machines. + * + * On the other hand, I'd like to be sure of a non-existent port: + * I feel a bit unsafe about using 0x80 (should be safe, though) + * + * Linus + * + */ + +#define __SLOW_DOWN_IO \ + __asm__ __volatile__( \ + "sb\t$0,0x80(%0)" \ + : : "r" (mips_io_port_base)); + +#ifdef CONF_SLOWDOWN_IO +#ifdef REALLY_SLOW_IO +#define SLOW_DOWN_IO { __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; } +#else +#define SLOW_DOWN_IO __SLOW_DOWN_IO +#endif +#else +#define SLOW_DOWN_IO +#endif + +/* + * Change virtual addresses to physical addresses and vv. + * These are trivial on the 1:1 Linux/MIPS mapping + */ +extern inline phys_addr_t virt_to_phys(volatile void * address) +{ + return CPHYSADDR(address); +} + +extern inline void * phys_to_virt(unsigned long address) +{ + return (void *)KSEG0ADDR(address); +} + +/* + * IO bus memory addresses are also 1:1 with the physical address + */ +extern inline unsigned long virt_to_bus(volatile void * address) +{ + return CPHYSADDR(address); +} + +extern inline void * bus_to_virt(unsigned long address) +{ + return (void *)KSEG0ADDR(address); +} + +/* + * isa_slot_offset is the address where E(ISA) busaddress 0 is mapped + * for the processor. + */ +extern unsigned long isa_slot_offset; + +extern void * __ioremap(unsigned long offset, unsigned long size, unsigned long flags); + +#if 0 +extern inline void *ioremap(unsigned long offset, unsigned long size) +{ + return __ioremap(offset, size, _CACHE_UNCACHED); +} + +extern inline void *ioremap_nocache(unsigned long offset, unsigned long size) +{ + return __ioremap(offset, size, _CACHE_UNCACHED); +} + +extern void iounmap(void *addr); +#endif + +/* + * XXX We need system specific versions of these to handle EISA address bits + * 24-31 on SNI. + * XXX more SNI hacks. + */ +#define readb(addr) (*(volatile unsigned char *)(addr)) +#define readw(addr) __ioswab16((*(volatile unsigned short *)(addr))) +#define readl(addr) __ioswab32((*(volatile unsigned int *)(addr))) +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl + +#define writeb(b,addr) (*(volatile unsigned char *)(addr)) = (b) +#define writew(b,addr) (*(volatile unsigned short *)(addr)) = (__ioswab16(b)) +#define writel(b,addr) (*(volatile unsigned int *)(addr)) = (__ioswab32(b)) +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel + +#define memset_io(a,b,c) memset((void *)(a),(b),(c)) +#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) +#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) + +/* END SNI HACKS ... */ + +/* + * ISA space is 'always mapped' on currently supported MIPS systems, no need + * to explicitly ioremap() it. The fact that the ISA IO space is mapped + * to PAGE_OFFSET is pure coincidence - it does not mean ISA values + * are physical addresses. The following constant pointer can be + * used as the IO-area pointer (it can be iounmapped as well, so the + * analogy with PCI is quite large): + */ +#define __ISA_IO_base ((char *)(PAGE_OFFSET)) + +#define isa_readb(a) readb(a) +#define isa_readw(a) readw(a) +#define isa_readl(a) readl(a) +#define isa_writeb(b,a) writeb(b,a) +#define isa_writew(w,a) writew(w,a) +#define isa_writel(l,a) writel(l,a) + +#define isa_memset_io(a,b,c) memset_io((a),(b),(c)) +#define isa_memcpy_fromio(a,b,c) memcpy_fromio((a),(b),(c)) +#define isa_memcpy_toio(a,b,c) memcpy_toio((a),(b),(c)) + +/* + * We don't have csum_partial_copy_fromio() yet, so we cheat here and + * just copy it. The net code will then do the checksum later. + */ +#define eth_io_copy_and_sum(skb,src,len,unused) memcpy_fromio((skb)->data,(src),(len)) +#define isa_eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(b),(c),(d)) + +static inline int check_signature(unsigned long io_addr, + const unsigned char *signature, int length) +{ + int retval = 0; + do { + if (readb(io_addr) != *signature) + goto out; + io_addr++; + signature++; + length--; + } while (length); + retval = 1; +out: + return retval; +} +#define isa_check_signature(io, s, l) check_signature(i,s,l) + +/* + * Talk about misusing macros.. + */ + +#define __OUT1(s) \ +extern inline void __out##s(unsigned int value, unsigned int port) { + +#define __OUT2(m) \ +__asm__ __volatile__ ("s" #m "\t%0,%1(%2)" + +#define __OUT(m,s,w) \ +__OUT1(s) __OUT2(m) : : "r" (__ioswab##w(value)), "i" (0), "r" (mips_io_port_base+port)); } \ +__OUT1(s##c) __OUT2(m) : : "r" (__ioswab##w(value)), "ir" (port), "r" (mips_io_port_base)); } \ +__OUT1(s##_p) __OUT2(m) : : "r" (__ioswab##w(value)), "i" (0), "r" (mips_io_port_base+port)); \ + SLOW_DOWN_IO; } \ +__OUT1(s##c_p) __OUT2(m) : : "r" (__ioswab##w(value)), "ir" (port), "r" (mips_io_port_base)); \ + SLOW_DOWN_IO; } + +#define __IN1(t,s) \ +extern __inline__ t __in##s(unsigned int port) { t _v; + +/* + * Required nops will be inserted by the assembler + */ +#define __IN2(m) \ +__asm__ __volatile__ ("l" #m "\t%0,%1(%2)" + +#define __IN(t,m,s,w) \ +__IN1(t,s) __IN2(m) : "=r" (_v) : "i" (0), "r" (mips_io_port_base+port)); return __ioswab##w(_v); } \ +__IN1(t,s##c) __IN2(m) : "=r" (_v) : "ir" (port), "r" (mips_io_port_base)); return __ioswab##w(_v); } \ +__IN1(t,s##_p) __IN2(m) : "=r" (_v) : "i" (0), "r" (mips_io_port_base+port)); SLOW_DOWN_IO; return __ioswab##w(_v); } \ +__IN1(t,s##c_p) __IN2(m) : "=r" (_v) : "ir" (port), "r" (mips_io_port_base)); SLOW_DOWN_IO; return __ioswab##w(_v); } + +#define __INS1(s) \ +extern inline void __ins##s(unsigned int port, void * addr, unsigned long count) { + +#define __INS2(m) \ +if (count) \ +__asm__ __volatile__ ( \ + ".set\tnoreorder\n\t" \ + ".set\tnoat\n" \ + "1:\tl" #m "\t$1,%4(%5)\n\t" \ + "subu\t%1,1\n\t" \ + "s" #m "\t$1,(%0)\n\t" \ + "bne\t$0,%1,1b\n\t" \ + "addiu\t%0,%6\n\t" \ + ".set\tat\n\t" \ + ".set\treorder" + +#define __INS(m,s,i) \ +__INS1(s) __INS2(m) \ + : "=r" (addr), "=r" (count) \ + : "0" (addr), "1" (count), "i" (0), \ + "r" (mips_io_port_base+port), "I" (i) \ + : "$1");} \ +__INS1(s##c) __INS2(m) \ + : "=r" (addr), "=r" (count) \ + : "0" (addr), "1" (count), "ir" (port), \ + "r" (mips_io_port_base), "I" (i) \ + : "$1");} + +#define __OUTS1(s) \ +extern inline void __outs##s(unsigned int port, const void * addr, unsigned long count) { + +#define __OUTS2(m) \ +if (count) \ +__asm__ __volatile__ ( \ + ".set\tnoreorder\n\t" \ + ".set\tnoat\n" \ + "1:\tl" #m "\t$1,(%0)\n\t" \ + "subu\t%1,1\n\t" \ + "s" #m "\t$1,%4(%5)\n\t" \ + "bne\t$0,%1,1b\n\t" \ + "addiu\t%0,%6\n\t" \ + ".set\tat\n\t" \ + ".set\treorder" + +#define __OUTS(m,s,i) \ +__OUTS1(s) __OUTS2(m) \ + : "=r" (addr), "=r" (count) \ + : "0" (addr), "1" (count), "i" (0), "r" (mips_io_port_base+port), "I" (i) \ + : "$1");} \ +__OUTS1(s##c) __OUTS2(m) \ + : "=r" (addr), "=r" (count) \ + : "0" (addr), "1" (count), "ir" (port), "r" (mips_io_port_base), "I" (i) \ + : "$1");} + +__IN(unsigned char,b,b,8) +__IN(unsigned short,h,w,16) +__IN(unsigned int,w,l,32) + +__OUT(b,b,8) +__OUT(h,w,16) +__OUT(w,l,32) + +__INS(b,b,1) +__INS(h,w,2) +__INS(w,l,4) + +__OUTS(b,b,1) +__OUTS(h,w,2) +__OUTS(w,l,4) + + +/* + * Note that due to the way __builtin_constant_p() works, you + * - can't use it inside an inline function (it will never be true) + * - you don't have to worry about side effects within the __builtin.. + */ +#define outb(val,port) \ +((__builtin_constant_p((port)) && (port) < 32768) ? \ + __outbc((val),(port)) : \ + __outb((val),(port))) + +#define inb(port) \ +((__builtin_constant_p((port)) && (port) < 32768) ? \ + __inbc(port) : \ + __inb(port)) + +#define outb_p(val,port) \ +((__builtin_constant_p((port)) && (port) < 32768) ? \ + __outbc_p((val),(port)) : \ + __outb_p((val),(port))) + +#define inb_p(port) \ +((__builtin_constant_p((port)) && (port) < 32768) ? \ + __inbc_p(port) : \ + __inb_p(port)) + +#define outw(val,port) \ +((__builtin_constant_p((port)) && (port) < 32768) ? \ + __outwc((val),(port)) : \ + __outw((val),(port))) + +#define inw(port) \ +((__builtin_constant_p((port)) && (port) < 32768) ? \ + __inwc(port) : \ + __inw(port)) + +#define outw_p(val,port) \ +((__builtin_constant_p((port)) && (port) < 32768) ? \ + __outwc_p((val),(port)) : \ + __outw_p((val),(port))) + +#define inw_p(port) \ +((__builtin_constant_p((port)) && (port) < 32768) ? \ + __inwc_p(port) : \ + __inw_p(port)) + +#define outl(val,port) \ +((__builtin_constant_p((port)) && (port) < 32768) ? \ + __outlc((val),(port)) : \ + __outl((val),(port))) + +#define inl(port) \ +((__builtin_constant_p((port)) && (port) < 32768) ? \ + __inlc(port) : \ + __inl(port)) + +#define outl_p(val,port) \ +((__builtin_constant_p((port)) && (port) < 32768) ? \ + __outlc_p((val),(port)) : \ + __outl_p((val),(port))) + +#define inl_p(port) \ +((__builtin_constant_p((port)) && (port) < 32768) ? \ + __inlc_p(port) : \ + __inl_p(port)) + + +#define outsb(port,addr,count) \ +((__builtin_constant_p((port)) && (port) < 32768) ? \ + __outsbc((port),(addr),(count)) : \ + __outsb ((port),(addr),(count))) + +#define insb(port,addr,count) \ +((__builtin_constant_p((port)) && (port) < 32768) ? \ + __insbc((port),(addr),(count)) : \ + __insb((port),(addr),(count))) + +#define outsw(port,addr,count) \ +((__builtin_constant_p((port)) && (port) < 32768) ? \ + __outswc((port),(addr),(count)) : \ + __outsw ((port),(addr),(count))) + +#define insw(port,addr,count) \ +((__builtin_constant_p((port)) && (port) < 32768) ? \ + __inswc((port),(addr),(count)) : \ + __insw((port),(addr),(count))) + +#define outsl(port,addr,count) \ +((__builtin_constant_p((port)) && (port) < 32768) ? \ + __outslc((port),(addr),(count)) : \ + __outsl ((port),(addr),(count))) + +#define insl(port,addr,count) \ +((__builtin_constant_p((port)) && (port) < 32768) ? \ + __inslc((port),(addr),(count)) : \ + __insl((port),(addr),(count))) + +#define IO_SPACE_LIMIT 0xffff + +/* + * The caches on some architectures aren't dma-coherent and have need to + * handle this in software. There are three types of operations that + * can be applied to dma buffers. + * + * - dma_cache_wback_inv(start, size) makes caches and coherent by + * writing the content of the caches back to memory, if necessary. + * The function also invalidates the affected part of the caches as + * necessary before DMA transfers from outside to memory. + * - dma_cache_wback(start, size) makes caches and coherent by + * writing the content of the caches back to memory, if necessary. + * The function also invalidates the affected part of the caches as + * necessary before DMA transfers from outside to memory. + * - dma_cache_inv(start, size) invalidates the affected parts of the + * caches. Dirty lines of the caches may be written back or simply + * be discarded. This operation is necessary before dma operations + * to the memory. + */ +extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size); +extern void (*_dma_cache_wback)(unsigned long start, unsigned long size); +extern void (*_dma_cache_inv)(unsigned long start, unsigned long size); + +#define dma_cache_wback_inv(start,size) _dma_cache_wback_inv(start,size) +#define dma_cache_wback(start,size) _dma_cache_wback(start,size) +#define dma_cache_inv(start,size) _dma_cache_inv(start,size) + +static inline void sync(void) +{ +} + +/* + * Given a physical address and a length, return a virtual address + * that can be used to access the memory range with the caching + * properties specified by "flags". + */ +#define MAP_NOCACHE (0) +#define MAP_WRCOMBINE (0) +#define MAP_WRBACK (0) +#define MAP_WRTHROUGH (0) + +static inline void * +map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) +{ + return (void *)paddr; +} + +/* + * Take down a mapping set up by map_physmem(). + */ +static inline void unmap_physmem(void *vaddr, unsigned long flags) +{ + +} + +#endif /* _ASM_IO_H */ diff --git a/arch/mips/include/asm/isadep.h b/arch/mips/include/asm/isadep.h new file mode 100644 index 0000000000..24c6cda793 --- /dev/null +++ b/arch/mips/include/asm/isadep.h @@ -0,0 +1,34 @@ +/* + * Various ISA level dependent constants. + * Most of the following constants reflect the different layout + * of Coprocessor 0 registers. + * + * Copyright (c) 1998 Harald Koerfgen + */ + +#ifndef __ASM_ISADEP_H +#define __ASM_ISADEP_H + +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) +/* + * R2000 or R3000 + */ + +/* + * kernel or user mode? (CP0_STATUS) + */ +#define KU_MASK 0x08 +#define KU_USER 0x08 +#define KU_KERN 0x00 + +#else +/* + * kernel or user mode? + */ +#define KU_MASK 0x18 +#define KU_USER 0x10 +#define KU_KERN 0x00 + +#endif + +#endif /* __ASM_ISADEP_H */ diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h new file mode 100644 index 0000000000..be7e5c65ec --- /dev/null +++ b/arch/mips/include/asm/mipsregs.h @@ -0,0 +1,1364 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle + * Copyright (C) 2000 Silicon Graphics, Inc. + * Modified for further R[236]000 support by Paul M. Antoine, 1996. + * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000, 07 MIPS Technologies, Inc. + * Copyright (C) 2003, 2004 Maciej W. Rozycki + */ +#ifndef _ASM_MIPSREGS_H +#define _ASM_MIPSREGS_H + +#if 0 +#include <linux/linkage.h> +#endif + +/* + * The following macros are especially useful for __asm__ + * inline assembler. + */ +#ifndef __STR +#define __STR(x) #x +#endif +#ifndef STR +#define STR(x) __STR(x) +#endif + +/* + * Configure language + */ +#ifdef __ASSEMBLY__ +#define _ULCAST_ +#else +#define _ULCAST_ (unsigned long) +#endif + +/* + * Coprocessor 0 register names + */ +#define CP0_INDEX $0 +#define CP0_RANDOM $1 +#define CP0_ENTRYLO0 $2 +#define CP0_ENTRYLO1 $3 +#define CP0_CONF $3 +#define CP0_CONTEXT $4 +#define CP0_PAGEMASK $5 +#define CP0_WIRED $6 +#define CP0_INFO $7 +#define CP0_BADVADDR $8 +#define CP0_COUNT $9 +#define CP0_ENTRYHI $10 +#define CP0_COMPARE $11 +#define CP0_STATUS $12 +#define CP0_CAUSE $13 +#define CP0_EPC $14 +#define CP0_PRID $15 +#define CP0_CONFIG $16 +#define CP0_LLADDR $17 +#define CP0_WATCHLO $18 +#define CP0_WATCHHI $19 +#define CP0_XCONTEXT $20 +#define CP0_FRAMEMASK $21 +#define CP0_DIAGNOSTIC $22 +#define CP0_DEBUG $23 +#define CP0_DEPC $24 +#define CP0_PERFORMANCE $25 +#define CP0_ECC $26 +#define CP0_CACHEERR $27 +#define CP0_TAGLO $28 +#define CP0_TAGHI $29 +#define CP0_ERROREPC $30 +#define CP0_DESAVE $31 + +/* + * R4640/R4650 cp0 register names. These registers are listed + * here only for completeness; without MMU these CPUs are not useable + * by Linux. A future ELKS port might take make Linux run on them + * though ... + */ +#define CP0_IBASE $0 +#define CP0_IBOUND $1 +#define CP0_DBASE $2 +#define CP0_DBOUND $3 +#define CP0_CALG $17 +#define CP0_IWATCH $18 +#define CP0_DWATCH $19 + +/* + * Coprocessor 0 Set 1 register names + */ +#define CP0_S1_DERRADDR0 $26 +#define CP0_S1_DERRADDR1 $27 +#define CP0_S1_INTCONTROL $20 + +/* + * Coprocessor 0 Set 2 register names + */ +#define CP0_S2_SRSCTL $12 /* MIPSR2 */ + +/* + * Coprocessor 0 Set 3 register names + */ +#define CP0_S3_SRSMAP $12 /* MIPSR2 */ + +/* + * TX39 Series + */ +#define CP0_TX39_CACHE $7 + +/* + * Coprocessor 1 (FPU) register names + */ +#define CP1_REVISION $0 +#define CP1_STATUS $31 + +/* + * FPU Status Register Values + */ +/* + * Status Register Values + */ + +#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */ +#define FPU_CSR_COND 0x00800000 /* $fcc0 */ +#define FPU_CSR_COND0 0x00800000 /* $fcc0 */ +#define FPU_CSR_COND1 0x02000000 /* $fcc1 */ +#define FPU_CSR_COND2 0x04000000 /* $fcc2 */ +#define FPU_CSR_COND3 0x08000000 /* $fcc3 */ +#define FPU_CSR_COND4 0x10000000 /* $fcc4 */ +#define FPU_CSR_COND5 0x20000000 /* $fcc5 */ +#define FPU_CSR_COND6 0x40000000 /* $fcc6 */ +#define FPU_CSR_COND7 0x80000000 /* $fcc7 */ + +/* + * X the exception cause indicator + * E the exception enable + * S the sticky/flag bit + */ +#define FPU_CSR_ALL_X 0x0003f000 +#define FPU_CSR_UNI_X 0x00020000 +#define FPU_CSR_INV_X 0x00010000 +#define FPU_CSR_DIV_X 0x00008000 +#define FPU_CSR_OVF_X 0x00004000 +#define FPU_CSR_UDF_X 0x00002000 +#define FPU_CSR_INE_X 0x00001000 + +#define FPU_CSR_ALL_E 0x00000f80 +#define FPU_CSR_INV_E 0x00000800 +#define FPU_CSR_DIV_E 0x00000400 +#define FPU_CSR_OVF_E 0x00000200 +#define FPU_CSR_UDF_E 0x00000100 +#define FPU_CSR_INE_E 0x00000080 + +#define FPU_CSR_ALL_S 0x0000007c +#define FPU_CSR_INV_S 0x00000040 +#define FPU_CSR_DIV_S 0x00000020 +#define FPU_CSR_OVF_S 0x00000010 +#define FPU_CSR_UDF_S 0x00000008 +#define FPU_CSR_INE_S 0x00000004 + +/* rounding mode */ +#define FPU_CSR_RN 0x0 /* nearest */ +#define FPU_CSR_RZ 0x1 /* towards zero */ +#define FPU_CSR_RU 0x2 /* towards +Infinity */ +#define FPU_CSR_RD 0x3 /* towards -Infinity */ + +/* + * Values for PageMask register + */ +#ifdef CONFIG_CPU_VR41XX + +/* Why doesn't stupidity hurt ... */ + +#define PM_1K 0x00000000 +#define PM_4K 0x00001800 +#define PM_16K 0x00007800 +#define PM_64K 0x0001f800 +#define PM_256K 0x0007f800 + +#else + +#define PM_4K 0x00000000 +#define PM_16K 0x00006000 +#define PM_64K 0x0001e000 +#define PM_256K 0x0007e000 +#define PM_1M 0x001fe000 +#define PM_4M 0x007fe000 +#define PM_16M 0x01ffe000 +#define PM_64M 0x07ffe000 +#define PM_256M 0x1fffe000 + +#endif + +/* + * Values used for computation of new tlb entries + */ +#define PL_4K 12 +#define PL_16K 14 +#define PL_64K 16 +#define PL_256K 18 +#define PL_1M 20 +#define PL_4M 22 +#define PL_16M 24 +#define PL_64M 26 +#define PL_256M 28 + +/* + * R4x00 interrupt enable / cause bits + */ +#define IE_SW0 (_ULCAST_(1) << 8) +#define IE_SW1 (_ULCAST_(1) << 9) +#define IE_IRQ0 (_ULCAST_(1) << 10) +#define IE_IRQ1 (_ULCAST_(1) << 11) +#define IE_IRQ2 (_ULCAST_(1) << 12) +#define IE_IRQ3 (_ULCAST_(1) << 13) +#define IE_IRQ4 (_ULCAST_(1) << 14) +#define IE_IRQ5 (_ULCAST_(1) << 15) + +/* + * R4x00 interrupt cause bits + */ +#define C_SW0 (_ULCAST_(1) << 8) +#define C_SW1 (_ULCAST_(1) << 9) +#define C_IRQ0 (_ULCAST_(1) << 10) +#define C_IRQ1 (_ULCAST_(1) << 11) +#define C_IRQ2 (_ULCAST_(1) << 12) +#define C_IRQ3 (_ULCAST_(1) << 13) +#define C_IRQ4 (_ULCAST_(1) << 14) +#define C_IRQ5 (_ULCAST_(1) << 15) + +/* + * Bitfields in the R4xx0 cp0 status register + */ +#define ST0_IE 0x00000001 +#define ST0_EXL 0x00000002 +#define ST0_ERL 0x00000004 +#define ST0_KSU 0x00000018 +# define KSU_USER 0x00000010 +# define KSU_SUPERVISOR 0x00000008 +# define KSU_KERNEL 0x00000000 +#define ST0_UX 0x00000020 +#define ST0_SX 0x00000040 +#define ST0_KX 0x00000080 +#define ST0_DE 0x00010000 +#define ST0_CE 0x00020000 + +/* + * Setting c0_status.co enables Hit_Writeback and Hit_Writeback_Invalidate + * cacheops in userspace. This bit exists only on RM7000 and RM9000 + * processors. + */ +#define ST0_CO 0x08000000 + +/* + * Bitfields in the R[23]000 cp0 status register. + */ +#define ST0_IEC 0x00000001 +#define ST0_KUC 0x00000002 +#define ST0_IEP 0x00000004 +#define ST0_KUP 0x00000008 +#define ST0_IEO 0x00000010 +#define ST0_KUO 0x00000020 +/* bits 6 & 7 are reserved on R[23]000 */ +#define ST0_ISC 0x00010000 +#define ST0_SWC 0x00020000 +#define ST0_CM 0x00080000 + +/* + * Bits specific to the R4640/R4650 + */ +#define ST0_UM (_ULCAST_(1) << 4) +#define ST0_IL (_ULCAST_(1) << 23) +#define ST0_DL (_ULCAST_(1) << 24) + +/* + * Enable the MIPS MDMX and DSP ASEs + */ +#define ST0_MX 0x01000000 + +/* + * Bitfields in the TX39 family CP0 Configuration Register 3 + */ +#define TX39_CONF_ICS_SHIFT 19 +#define TX39_CONF_ICS_MASK 0x00380000 +#define TX39_CONF_ICS_1KB 0x00000000 +#define TX39_CONF_ICS_2KB 0x00080000 +#define TX39_CONF_ICS_4KB 0x00100000 +#define TX39_CONF_ICS_8KB 0x00180000 +#define TX39_CONF_ICS_16KB 0x00200000 + +#define TX39_CONF_DCS_SHIFT 16 +#define TX39_CONF_DCS_MASK 0x00070000 +#define TX39_CONF_DCS_1KB 0x00000000 +#define TX39_CONF_DCS_2KB 0x00010000 +#define TX39_CONF_DCS_4KB 0x00020000 +#define TX39_CONF_DCS_8KB 0x00030000 +#define TX39_CONF_DCS_16KB 0x00040000 + +#define TX39_CONF_CWFON 0x00004000 +#define TX39_CONF_WBON 0x00002000 +#define TX39_CONF_RF_SHIFT 10 +#define TX39_CONF_RF_MASK 0x00000c00 +#define TX39_CONF_DOZE 0x00000200 +#define TX39_CONF_HALT 0x00000100 +#define TX39_CONF_LOCK 0x00000080 +#define TX39_CONF_ICE 0x00000020 +#define TX39_CONF_DCE 0x00000010 +#define TX39_CONF_IRSIZE_SHIFT 2 +#define TX39_CONF_IRSIZE_MASK 0x0000000c +#define TX39_CONF_DRSIZE_SHIFT 0 +#define TX39_CONF_DRSIZE_MASK 0x00000003 + +/* + * Status register bits available in all MIPS CPUs. + */ +#define ST0_IM 0x0000ff00 +#define STATUSB_IP0 8 +#define STATUSF_IP0 (_ULCAST_(1) << 8) +#define STATUSB_IP1 9 +#define STATUSF_IP1 (_ULCAST_(1) << 9) +#define STATUSB_IP2 10 +#define STATUSF_IP2 (_ULCAST_(1) << 10) +#define STATUSB_IP3 11 +#define STATUSF_IP3 (_ULCAST_(1) << 11) +#define STATUSB_IP4 12 +#define STATUSF_IP4 (_ULCAST_(1) << 12) +#define STATUSB_IP5 13 +#define STATUSF_IP5 (_ULCAST_(1) << 13) +#define STATUSB_IP6 14 +#define STATUSF_IP6 (_ULCAST_(1) << 14) +#define STATUSB_IP7 15 +#define STATUSF_IP7 (_ULCAST_(1) << 15) +#define STATUSB_IP8 0 +#define STATUSF_IP8 (_ULCAST_(1) << 0) +#define STATUSB_IP9 1 +#define STATUSF_IP9 (_ULCAST_(1) << 1) +#define STATUSB_IP10 2 +#define STATUSF_IP10 (_ULCAST_(1) << 2) +#define STATUSB_IP11 3 +#define STATUSF_IP11 (_ULCAST_(1) << 3) +#define STATUSB_IP12 4 +#define STATUSF_IP12 (_ULCAST_(1) << 4) +#define STATUSB_IP13 5 +#define STATUSF_IP13 (_ULCAST_(1) << 5) +#define STATUSB_IP14 6 +#define STATUSF_IP14 (_ULCAST_(1) << 6) +#define STATUSB_IP15 7 +#define STATUSF_IP15 (_ULCAST_(1) << 7) +#define ST0_CH 0x00040000 +#define ST0_SR 0x00100000 +#define ST0_TS 0x00200000 +#define ST0_BEV 0x00400000 +#define ST0_RE 0x02000000 +#define ST0_FR 0x04000000 +#define ST0_CU 0xf0000000 +#define ST0_CU0 0x10000000 +#define ST0_CU1 0x20000000 +#define ST0_CU2 0x40000000 +#define ST0_CU3 0x80000000 +#define ST0_XX 0x80000000 /* MIPS IV naming */ + +/* + * Bitfields and bit numbers in the coprocessor 0 cause register. + * + * Refer to your MIPS R4xx0 manual, chapter 5 for explanation. + */ +#define CAUSEB_EXCCODE 2 +#define CAUSEF_EXCCODE (_ULCAST_(31) << 2) +#define CAUSEB_IP 8 +#define CAUSEF_IP (_ULCAST_(255) << 8) +#define CAUSEB_IP0 8 +#define CAUSEF_IP0 (_ULCAST_(1) << 8) +#define CAUSEB_IP1 9 +#define CAUSEF_IP1 (_ULCAST_(1) << 9) +#define CAUSEB_IP2 10 +#define CAUSEF_IP2 (_ULCAST_(1) << 10) +#define CAUSEB_IP3 11 +#define CAUSEF_IP3 (_ULCAST_(1) << 11) +#define CAUSEB_IP4 12 +#define CAUSEF_IP4 (_ULCAST_(1) << 12) +#define CAUSEB_IP5 13 +#define CAUSEF_IP5 (_ULCAST_(1) << 13) +#define CAUSEB_IP6 14 +#define CAUSEF_IP6 (_ULCAST_(1) << 14) +#define CAUSEB_IP7 15 +#define CAUSEF_IP7 (_ULCAST_(1) << 15) +#define CAUSEB_IV 23 +#define CAUSEF_IV (_ULCAST_(1) << 23) +#define CAUSEB_CE 28 +#define CAUSEF_CE (_ULCAST_(3) << 28) +#define CAUSEB_BD 31 +#define CAUSEF_BD (_ULCAST_(1) << 31) + +/* + * Bits in the coprocessor 0 config register. + */ +/* Generic bits. */ +#define CONF_CM_CACHABLE_NO_WA 0 +#define CONF_CM_CACHABLE_WA 1 +#define CONF_CM_UNCACHED 2 +#define CONF_CM_CACHABLE_NONCOHERENT 3 +#define CONF_CM_CACHABLE_CE 4 +#define CONF_CM_CACHABLE_COW 5 +#define CONF_CM_CACHABLE_CUW 6 +#define CONF_CM_CACHABLE_ACCELERATED 7 +#define CONF_CM_CMASK 7 +#define CONF_BE (_ULCAST_(1) << 15) + +/* Bits common to various processors. */ +#define CONF_CU (_ULCAST_(1) << 3) +#define CONF_DB (_ULCAST_(1) << 4) +#define CONF_IB (_ULCAST_(1) << 5) +#define CONF_DC (_ULCAST_(7) << 6) +#define CONF_IC (_ULCAST_(7) << 9) +#define CONF_EB (_ULCAST_(1) << 13) +#define CONF_EM (_ULCAST_(1) << 14) +#define CONF_SM (_ULCAST_(1) << 16) +#define CONF_SC (_ULCAST_(1) << 17) +#define CONF_EW (_ULCAST_(3) << 18) +#define CONF_EP (_ULCAST_(15)<< 24) +#define CONF_EC (_ULCAST_(7) << 28) +#define CONF_CM (_ULCAST_(1) << 31) + +/* Bits specific to the R4xx0. */ +#define R4K_CONF_SW (_ULCAST_(1) << 20) +#define R4K_CONF_SS (_ULCAST_(1) << 21) +#define R4K_CONF_SB (_ULCAST_(3) << 22) + +/* Bits specific to the R5000. */ +#define R5K_CONF_SE (_ULCAST_(1) << 12) +#define R5K_CONF_SS (_ULCAST_(3) << 20) + +/* Bits specific to the RM7000. */ +#define RM7K_CONF_SE (_ULCAST_(1) << 3) +#define RM7K_CONF_TE (_ULCAST_(1) << 12) +#define RM7K_CONF_CLK (_ULCAST_(1) << 16) +#define RM7K_CONF_TC (_ULCAST_(1) << 17) +#define RM7K_CONF_SI (_ULCAST_(3) << 20) +#define RM7K_CONF_SC (_ULCAST_(1) << 31) + +/* Bits specific to the R10000. */ +#define R10K_CONF_DN (_ULCAST_(3) << 3) +#define R10K_CONF_CT (_ULCAST_(1) << 5) +#define R10K_CONF_PE (_ULCAST_(1) << 6) +#define R10K_CONF_PM (_ULCAST_(3) << 7) +#define R10K_CONF_EC (_ULCAST_(15)<< 9) +#define R10K_CONF_SB (_ULCAST_(1) << 13) +#define R10K_CONF_SK (_ULCAST_(1) << 14) +#define R10K_CONF_SS (_ULCAST_(7) << 16) +#define R10K_CONF_SC (_ULCAST_(7) << 19) +#define R10K_CONF_DC (_ULCAST_(7) << 26) +#define R10K_CONF_IC (_ULCAST_(7) << 29) + +/* Bits specific to the VR41xx. */ +#define VR41_CONF_CS (_ULCAST_(1) << 12) +#define VR41_CONF_P4K (_ULCAST_(1) << 13) +#define VR41_CONF_BP (_ULCAST_(1) << 16) +#define VR41_CONF_M16 (_ULCAST_(1) << 20) +#define VR41_CONF_AD (_ULCAST_(1) << 23) + +/* Bits specific to the R30xx. */ +#define R30XX_CONF_FDM (_ULCAST_(1) << 19) +#define R30XX_CONF_REV (_ULCAST_(1) << 22) +#define R30XX_CONF_AC (_ULCAST_(1) << 23) +#define R30XX_CONF_RF (_ULCAST_(1) << 24) +#define R30XX_CONF_HALT (_ULCAST_(1) << 25) +#define R30XX_CONF_FPINT (_ULCAST_(7) << 26) +#define R30XX_CONF_DBR (_ULCAST_(1) << 29) +#define R30XX_CONF_SB (_ULCAST_(1) << 30) +#define R30XX_CONF_LOCK (_ULCAST_(1) << 31) + +/* Bits specific to the TX49. */ +#define TX49_CONF_DC (_ULCAST_(1) << 16) +#define TX49_CONF_IC (_ULCAST_(1) << 17) /* conflict with CONF_SC */ +#define TX49_CONF_HALT (_ULCAST_(1) << 18) +#define TX49_CONF_CWFON (_ULCAST_(1) << 27) + +/* Bits specific to the MIPS32/64 PRA. */ +#define MIPS_CONF_MT (_ULCAST_(7) << 7) +#define MIPS_CONF_AR (_ULCAST_(7) << 10) +#define MIPS_CONF_AT (_ULCAST_(3) << 13) +#define MIPS_CONF_M (_ULCAST_(1) << 31) + +/* + * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above. + */ +#define MIPS_CONF1_FP (_ULCAST_(1) << 0) +#define MIPS_CONF1_EP (_ULCAST_(1) << 1) +#define MIPS_CONF1_CA (_ULCAST_(1) << 2) +#define MIPS_CONF1_WR (_ULCAST_(1) << 3) +#define MIPS_CONF1_PC (_ULCAST_(1) << 4) +#define MIPS_CONF1_MD (_ULCAST_(1) << 5) +#define MIPS_CONF1_C2 (_ULCAST_(1) << 6) +#define MIPS_CONF1_DA (_ULCAST_(7) << 7) +#define MIPS_CONF1_DL (_ULCAST_(7) << 10) +#define MIPS_CONF1_DS (_ULCAST_(7) << 13) +#define MIPS_CONF1_IA (_ULCAST_(7) << 16) +#define MIPS_CONF1_IL (_ULCAST_(7) << 19) +#define MIPS_CONF1_IS (_ULCAST_(7) << 22) +#define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25) + +#define MIPS_CONF2_SA (_ULCAST_(15)<< 0) +#define MIPS_CONF2_SL (_ULCAST_(15)<< 4) +#define MIPS_CONF2_SS (_ULCAST_(15)<< 8) +#define MIPS_CONF2_SU (_ULCAST_(15)<< 12) +#define MIPS_CONF2_TA (_ULCAST_(15)<< 16) +#define MIPS_CONF2_TL (_ULCAST_(15)<< 20) +#define MIPS_CONF2_TS (_ULCAST_(15)<< 24) +#define MIPS_CONF2_TU (_ULCAST_(7) << 28) + +#define MIPS_CONF3_TL (_ULCAST_(1) << 0) +#define MIPS_CONF3_SM (_ULCAST_(1) << 1) +#define MIPS_CONF3_MT (_ULCAST_(1) << 2) +#define MIPS_CONF3_SP (_ULCAST_(1) << 4) +#define MIPS_CONF3_VINT (_ULCAST_(1) << 5) +#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6) +#define MIPS_CONF3_LPA (_ULCAST_(1) << 7) +#define MIPS_CONF3_DSP (_ULCAST_(1) << 10) +#define MIPS_CONF3_ULRI (_ULCAST_(1) << 13) + +#define MIPS_CONF7_WII (_ULCAST_(1) << 31) + +#define MIPS_CONF7_RPS (_ULCAST_(1) << 2) + +/* + * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register. + */ +#define MIPS_FPIR_S (_ULCAST_(1) << 16) +#define MIPS_FPIR_D (_ULCAST_(1) << 17) +#define MIPS_FPIR_PS (_ULCAST_(1) << 18) +#define MIPS_FPIR_3D (_ULCAST_(1) << 19) +#define MIPS_FPIR_W (_ULCAST_(1) << 20) +#define MIPS_FPIR_L (_ULCAST_(1) << 21) +#define MIPS_FPIR_F64 (_ULCAST_(1) << 22) + +#ifndef __ASSEMBLY__ + +/* + * Functions to access the R10000 performance counters. These are basically + * mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit + * performance counter number encoded into bits 1 ... 5 of the instruction. + * Only performance counters 0 to 1 actually exist, so for a non-R10000 aware + * disassembler these will look like an access to sel 0 or 1. + */ +#define read_r10k_perf_cntr(counter) \ +({ \ + unsigned int __res; \ + __asm__ __volatile__( \ + "mfpc\t%0, %1" \ + : "=r" (__res) \ + : "i" (counter)); \ + \ + __res; \ +}) + +#define write_r10k_perf_cntr(counter,val) \ +do { \ + __asm__ __volatile__( \ + "mtpc\t%0, %1" \ + : \ + : "r" (val), "i" (counter)); \ +} while (0) + +#define read_r10k_perf_event(counter) \ +({ \ + unsigned int __res; \ + __asm__ __volatile__( \ + "mfps\t%0, %1" \ + : "=r" (__res) \ + : "i" (counter)); \ + \ + __res; \ +}) + +#define write_r10k_perf_cntl(counter,val) \ +do { \ + __asm__ __volatile__( \ + "mtps\t%0, %1" \ + : \ + : "r" (val), "i" (counter)); \ +} while (0) + +/* + * Macros to access the system control coprocessor + */ + +#define __read_32bit_c0_register(source, sel) \ +({ int __res; \ + if (sel == 0) \ + __asm__ __volatile__( \ + "mfc0\t%0, " #source "\n\t" \ + : "=r" (__res)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips32\n\t" \ + "mfc0\t%0, " #source ", " #sel "\n\t" \ + ".set\tmips0\n\t" \ + : "=r" (__res)); \ + __res; \ +}) + +#define __read_64bit_c0_register(source, sel) \ +({ unsigned long long __res; \ + if (sizeof(unsigned long) == 4) \ + __res = __read_64bit_c0_split(source, sel); \ + else if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips3\n\t" \ + "dmfc0\t%0, " #source "\n\t" \ + ".set\tmips0" \ + : "=r" (__res)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmfc0\t%0, " #source ", " #sel "\n\t" \ + ".set\tmips0" \ + : "=r" (__res)); \ + __res; \ +}) + +#define __write_32bit_c0_register(register, sel, value) \ +do { \ + if (sel == 0) \ + __asm__ __volatile__( \ + "mtc0\t%z0, " #register "\n\t" \ + : : "Jr" ((unsigned int)(value))); \ + else \ + __asm__ __volatile__( \ + ".set\tmips32\n\t" \ + "mtc0\t%z0, " #register ", " #sel "\n\t" \ + ".set\tmips0" \ + : : "Jr" ((unsigned int)(value))); \ +} while (0) + +#define __write_64bit_c0_register(register, sel, value) \ +do { \ + if (sizeof(unsigned long) == 4) \ + __write_64bit_c0_split(register, sel, value); \ + else if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips3\n\t" \ + "dmtc0\t%z0, " #register "\n\t" \ + ".set\tmips0" \ + : : "Jr" (value)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmtc0\t%z0, " #register ", " #sel "\n\t" \ + ".set\tmips0" \ + : : "Jr" (value)); \ +} while (0) + +#define __read_ulong_c0_register(reg, sel) \ + ((sizeof(unsigned long) == 4) ? \ + (unsigned long) __read_32bit_c0_register(reg, sel) : \ + (unsigned long) __read_64bit_c0_register(reg, sel)) + +#define __write_ulong_c0_register(reg, sel, val) \ +do { \ + if (sizeof(unsigned long) == 4) \ + __write_32bit_c0_register(reg, sel, val); \ + else \ + __write_64bit_c0_register(reg, sel, val); \ +} while (0) + +/* + * On RM7000/RM9000 these are uses to access cop0 set 1 registers + */ +#define __read_32bit_c0_ctrl_register(source) \ +({ int __res; \ + __asm__ __volatile__( \ + "cfc0\t%0, " #source "\n\t" \ + : "=r" (__res)); \ + __res; \ +}) + +#define __write_32bit_c0_ctrl_register(register, value) \ +do { \ + __asm__ __volatile__( \ + "ctc0\t%z0, " #register "\n\t" \ + : : "Jr" ((unsigned int)(value))); \ +} while (0) + +/* + * These versions are only needed for systems with more than 38 bits of + * physical address space running the 32-bit kernel. That's none atm :-) + */ +#define __read_64bit_c0_split(source, sel) \ +({ \ + unsigned long long __val; \ + unsigned long __flags; \ + \ + local_irq_save(__flags); \ + if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmfc0\t%M0, " #source "\n\t" \ + "dsll\t%L0, %M0, 32\n\t" \ + "dsrl\t%M0, %M0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + ".set\tmips0" \ + : "=r" (__val)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmfc0\t%M0, " #source ", " #sel "\n\t" \ + "dsll\t%L0, %M0, 32\n\t" \ + "dsrl\t%M0, %M0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + ".set\tmips0" \ + : "=r" (__val)); \ + local_irq_restore(__flags); \ + \ + __val; \ +}) + +#define __write_64bit_c0_split(source, sel, val) \ +do { \ + unsigned long __flags; \ + \ + local_irq_save(__flags); \ + if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dsll\t%L0, %L0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + "dsll\t%M0, %M0, 32\n\t" \ + "or\t%L0, %L0, %M0\n\t" \ + "dmtc0\t%L0, " #source "\n\t" \ + ".set\tmips0" \ + : : "r" (val)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dsll\t%L0, %L0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + "dsll\t%M0, %M0, 32\n\t" \ + "or\t%L0, %L0, %M0\n\t" \ + "dmtc0\t%L0, " #source ", " #sel "\n\t" \ + ".set\tmips0" \ + : : "r" (val)); \ + local_irq_restore(__flags); \ +} while (0) + +#define read_c0_index() __read_32bit_c0_register($0, 0) +#define write_c0_index(val) __write_32bit_c0_register($0, 0, val) + +#define read_c0_entrylo0() __read_ulong_c0_register($2, 0) +#define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val) + +#define read_c0_entrylo1() __read_ulong_c0_register($3, 0) +#define write_c0_entrylo1(val) __write_ulong_c0_register($3, 0, val) + +#define read_c0_conf() __read_32bit_c0_register($3, 0) +#define write_c0_conf(val) __write_32bit_c0_register($3, 0, val) + +#define read_c0_context() __read_ulong_c0_register($4, 0) +#define write_c0_context(val) __write_ulong_c0_register($4, 0, val) + +#define read_c0_userlocal() __read_ulong_c0_register($4, 2) +#define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val) + +#define read_c0_pagemask() __read_32bit_c0_register($5, 0) +#define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val) + +#define read_c0_wired() __read_32bit_c0_register($6, 0) +#define write_c0_wired(val) __write_32bit_c0_register($6, 0, val) + +#define read_c0_info() __read_32bit_c0_register($7, 0) + +#define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */ +#define write_c0_cache(val) __write_32bit_c0_register($7, 0, val) + +#define read_c0_badvaddr() __read_ulong_c0_register($8, 0) +#define write_c0_badvaddr(val) __write_ulong_c0_register($8, 0, val) + +#define read_c0_count() __read_32bit_c0_register($9, 0) +#define write_c0_count(val) __write_32bit_c0_register($9, 0, val) + +#define read_c0_count2() __read_32bit_c0_register($9, 6) /* pnx8550 */ +#define write_c0_count2(val) __write_32bit_c0_register($9, 6, val) + +#define read_c0_count3() __read_32bit_c0_register($9, 7) /* pnx8550 */ +#define write_c0_count3(val) __write_32bit_c0_register($9, 7, val) + +#define read_c0_entryhi() __read_ulong_c0_register($10, 0) +#define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val) + +#define read_c0_compare() __read_32bit_c0_register($11, 0) +#define write_c0_compare(val) __write_32bit_c0_register($11, 0, val) + +#define read_c0_compare2() __read_32bit_c0_register($11, 6) /* pnx8550 */ +#define write_c0_compare2(val) __write_32bit_c0_register($11, 6, val) + +#define read_c0_compare3() __read_32bit_c0_register($11, 7) /* pnx8550 */ +#define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val) + +#define read_c0_status() __read_32bit_c0_register($12, 0) +#ifdef CONFIG_MIPS_MT_SMTC +#define write_c0_status(val) \ +do { \ + __write_32bit_c0_register($12, 0, val); \ + __ehb(); \ +} while (0) +#else +/* + * Legacy non-SMTC code, which may be hazardous + * but which might not support EHB + */ +#define write_c0_status(val) __write_32bit_c0_register($12, 0, val) +#endif /* CONFIG_MIPS_MT_SMTC */ + +#define read_c0_cause() __read_32bit_c0_register($13, 0) +#define write_c0_cause(val) __write_32bit_c0_register($13, 0, val) + +#define read_c0_epc() __read_ulong_c0_register($14, 0) +#define write_c0_epc(val) __write_ulong_c0_register($14, 0, val) + +#define read_c0_prid() __read_32bit_c0_register($15, 0) + +#define read_c0_config() __read_32bit_c0_register($16, 0) +#define read_c0_config1() __read_32bit_c0_register($16, 1) +#define read_c0_config2() __read_32bit_c0_register($16, 2) +#define read_c0_config3() __read_32bit_c0_register($16, 3) +#define read_c0_config4() __read_32bit_c0_register($16, 4) +#define read_c0_config5() __read_32bit_c0_register($16, 5) +#define read_c0_config6() __read_32bit_c0_register($16, 6) +#define read_c0_config7() __read_32bit_c0_register($16, 7) +#define write_c0_config(val) __write_32bit_c0_register($16, 0, val) +#define write_c0_config1(val) __write_32bit_c0_register($16, 1, val) +#define write_c0_config2(val) __write_32bit_c0_register($16, 2, val) +#define write_c0_config3(val) __write_32bit_c0_register($16, 3, val) +#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val) +#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val) +#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val) +#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val) + +/* + * The WatchLo register. There may be upto 8 of them. + */ +#define read_c0_watchlo0() __read_ulong_c0_register($18, 0) +#define read_c0_watchlo1() __read_ulong_c0_register($18, 1) +#define read_c0_watchlo2() __read_ulong_c0_register($18, 2) +#define read_c0_watchlo3() __read_ulong_c0_register($18, 3) +#define read_c0_watchlo4() __read_ulong_c0_register($18, 4) +#define read_c0_watchlo5() __read_ulong_c0_register($18, 5) +#define read_c0_watchlo6() __read_ulong_c0_register($18, 6) +#define read_c0_watchlo7() __read_ulong_c0_register($18, 7) +#define write_c0_watchlo0(val) __write_ulong_c0_register($18, 0, val) +#define write_c0_watchlo1(val) __write_ulong_c0_register($18, 1, val) +#define write_c0_watchlo2(val) __write_ulong_c0_register($18, 2, val) +#define write_c0_watchlo3(val) __write_ulong_c0_register($18, 3, val) +#define write_c0_watchlo4(val) __write_ulong_c0_register($18, 4, val) +#define write_c0_watchlo5(val) __write_ulong_c0_register($18, 5, val) +#define write_c0_watchlo6(val) __write_ulong_c0_register($18, 6, val) +#define write_c0_watchlo7(val) __write_ulong_c0_register($18, 7, val) + +/* + * The WatchHi register. There may be upto 8 of them. + */ +#define read_c0_watchhi0() __read_32bit_c0_register($19, 0) +#define read_c0_watchhi1() __read_32bit_c0_register($19, 1) +#define read_c0_watchhi2() __read_32bit_c0_register($19, 2) +#define read_c0_watchhi3() __read_32bit_c0_register($19, 3) +#define read_c0_watchhi4() __read_32bit_c0_register($19, 4) +#define read_c0_watchhi5() __read_32bit_c0_register($19, 5) +#define read_c0_watchhi6() __read_32bit_c0_register($19, 6) +#define read_c0_watchhi7() __read_32bit_c0_register($19, 7) + +#define write_c0_watchhi0(val) __write_32bit_c0_register($19, 0, val) +#define write_c0_watchhi1(val) __write_32bit_c0_register($19, 1, val) +#define write_c0_watchhi2(val) __write_32bit_c0_register($19, 2, val) +#define write_c0_watchhi3(val) __write_32bit_c0_register($19, 3, val) +#define write_c0_watchhi4(val) __write_32bit_c0_register($19, 4, val) +#define write_c0_watchhi5(val) __write_32bit_c0_register($19, 5, val) +#define write_c0_watchhi6(val) __write_32bit_c0_register($19, 6, val) +#define write_c0_watchhi7(val) __write_32bit_c0_register($19, 7, val) + +#define read_c0_xcontext() __read_ulong_c0_register($20, 0) +#define write_c0_xcontext(val) __write_ulong_c0_register($20, 0, val) + +#define read_c0_intcontrol() __read_32bit_c0_ctrl_register($20) +#define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val) + +#define read_c0_framemask() __read_32bit_c0_register($21, 0) +#define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val) + +/* RM9000 PerfControl performance counter control register */ +#define read_c0_perfcontrol() __read_32bit_c0_register($22, 0) +#define write_c0_perfcontrol(val) __write_32bit_c0_register($22, 0, val) + +#define read_c0_diag() __read_32bit_c0_register($22, 0) +#define write_c0_diag(val) __write_32bit_c0_register($22, 0, val) + +#define read_c0_diag1() __read_32bit_c0_register($22, 1) +#define write_c0_diag1(val) __write_32bit_c0_register($22, 1, val) + +#define read_c0_diag2() __read_32bit_c0_register($22, 2) +#define write_c0_diag2(val) __write_32bit_c0_register($22, 2, val) + +#define read_c0_diag3() __read_32bit_c0_register($22, 3) +#define write_c0_diag3(val) __write_32bit_c0_register($22, 3, val) + +#define read_c0_diag4() __read_32bit_c0_register($22, 4) +#define write_c0_diag4(val) __write_32bit_c0_register($22, 4, val) + +#define read_c0_diag5() __read_32bit_c0_register($22, 5) +#define write_c0_diag5(val) __write_32bit_c0_register($22, 5, val) + +#define read_c0_debug() __read_32bit_c0_register($23, 0) +#define write_c0_debug(val) __write_32bit_c0_register($23, 0, val) + +#define read_c0_depc() __read_ulong_c0_register($24, 0) +#define write_c0_depc(val) __write_ulong_c0_register($24, 0, val) + +/* + * MIPS32 / MIPS64 performance counters + */ +#define read_c0_perfctrl0() __read_32bit_c0_register($25, 0) +#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val) +#define read_c0_perfcntr0() __read_32bit_c0_register($25, 1) +#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val) +#define read_c0_perfctrl1() __read_32bit_c0_register($25, 2) +#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val) +#define read_c0_perfcntr1() __read_32bit_c0_register($25, 3) +#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val) +#define read_c0_perfctrl2() __read_32bit_c0_register($25, 4) +#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val) +#define read_c0_perfcntr2() __read_32bit_c0_register($25, 5) +#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val) +#define read_c0_perfctrl3() __read_32bit_c0_register($25, 6) +#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val) +#define read_c0_perfcntr3() __read_32bit_c0_register($25, 7) +#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val) + +/* RM9000 PerfCount performance counter register */ +#define read_c0_perfcount() __read_64bit_c0_register($25, 0) +#define write_c0_perfcount(val) __write_64bit_c0_register($25, 0, val) + +#define read_c0_ecc() __read_32bit_c0_register($26, 0) +#define write_c0_ecc(val) __write_32bit_c0_register($26, 0, val) + +#define read_c0_derraddr0() __read_ulong_c0_register($26, 1) +#define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val) + +#define read_c0_cacheerr() __read_32bit_c0_register($27, 0) + +#define read_c0_derraddr1() __read_ulong_c0_register($27, 1) +#define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val) + +#define read_c0_taglo() __read_32bit_c0_register($28, 0) +#define write_c0_taglo(val) __write_32bit_c0_register($28, 0, val) + +#define read_c0_dtaglo() __read_32bit_c0_register($28, 2) +#define write_c0_dtaglo(val) __write_32bit_c0_register($28, 2, val) + +#define read_c0_taghi() __read_32bit_c0_register($29, 0) +#define write_c0_taghi(val) __write_32bit_c0_register($29, 0, val) + +#define read_c0_errorepc() __read_ulong_c0_register($30, 0) +#define write_c0_errorepc(val) __write_ulong_c0_register($30, 0, val) + +/* MIPSR2 */ +#define read_c0_hwrena() __read_32bit_c0_register($7, 0) +#define write_c0_hwrena(val) __write_32bit_c0_register($7, 0, val) + +#define read_c0_intctl() __read_32bit_c0_register($12, 1) +#define write_c0_intctl(val) __write_32bit_c0_register($12, 1, val) + +#define read_c0_srsctl() __read_32bit_c0_register($12, 2) +#define write_c0_srsctl(val) __write_32bit_c0_register($12, 2, val) + +#define read_c0_srsmap() __read_32bit_c0_register($12, 3) +#define write_c0_srsmap(val) __write_32bit_c0_register($12, 3, val) + +#define read_c0_ebase() __read_32bit_c0_register($15, 1) +#define write_c0_ebase(val) __write_32bit_c0_register($15, 1, val) + +/* + * Macros to access the floating point coprocessor control registers + */ +#define read_32bit_cp1_register(source) \ +({ int __res; \ + __asm__ __volatile__( \ + ".set\tpush\n\t" \ + ".set\treorder\n\t" \ + "cfc1\t%0,"STR(source)"\n\t" \ + ".set\tpop" \ + : "=r" (__res)); \ + __res;}) + +#define rddsp(mask) \ +({ \ + unsigned int __res; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # rddsp $1, %x1 \n" \ + " .word 0x7c000cb8 | (%x1 << 16) \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__res) \ + : "i" (mask)); \ + __res; \ +}) + +#define wrdsp(val, mask) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # wrdsp $1, %x1 \n" \ + " .word 0x7c2004f8 | (%x1 << 11) \n" \ + " .set pop \n" \ + : \ + : "r" (val), "i" (mask)); \ +} while (0) + +#define mfhi0() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mfhi %0, $ac0 \n" \ + " .word 0x00000810 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mfhi1() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mfhi %0, $ac1 \n" \ + " .word 0x00200810 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mfhi2() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mfhi %0, $ac2 \n" \ + " .word 0x00400810 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mfhi3() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mfhi %0, $ac3 \n" \ + " .word 0x00600810 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mflo0() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mflo %0, $ac0 \n" \ + " .word 0x00000812 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mflo1() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mflo %0, $ac1 \n" \ + " .word 0x00200812 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mflo2() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mflo %0, $ac2 \n" \ + " .word 0x00400812 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mflo3() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mflo %0, $ac3 \n" \ + " .word 0x00600812 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mthi0(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mthi $1, $ac0 \n" \ + " .word 0x00200011 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mthi1(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mthi $1, $ac1 \n" \ + " .word 0x00200811 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mthi2(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mthi $1, $ac2 \n" \ + " .word 0x00201011 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mthi3(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mthi $1, $ac3 \n" \ + " .word 0x00201811 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mtlo0(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mtlo $1, $ac0 \n" \ + " .word 0x00200013 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mtlo1(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mtlo $1, $ac1 \n" \ + " .word 0x00200813 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mtlo2(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mtlo $1, $ac2 \n" \ + " .word 0x00201013 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mtlo3(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mtlo $1, $ac3 \n" \ + " .word 0x00201813 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +/* + * TLB operations. + * + * It is responsibility of the caller to take care of any TLB hazards. + */ +static inline void tlb_probe(void) +{ + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbp\n\t" + ".set reorder"); +} + +static inline void tlb_read(void) +{ +#if MIPS34K_MISSED_ITLB_WAR + int res = 0; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set noat \n" + " .set mips32r2 \n" + " .word 0x41610001 # dvpe $1 \n" + " move %0, $1 \n" + " ehb \n" + " .set pop \n" + : "=r" (res)); + + instruction_hazard(); +#endif + + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbr\n\t" + ".set reorder"); + +#if MIPS34K_MISSED_ITLB_WAR + if ((res & _ULCAST_(1))) + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set noat \n" + " .set mips32r2 \n" + " .word 0x41600021 # evpe \n" + " ehb \n" + " .set pop \n"); +#endif +} + +static inline void tlb_write_indexed(void) +{ + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbwi\n\t" + ".set reorder"); +} + +static inline void tlb_write_random(void) +{ + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbwr\n\t" + ".set reorder"); +} + +/* + * Manipulate bits in a c0 register. + */ +#define __BUILD_SET_C0(name) \ +static inline unsigned int \ +set_c0_##name(unsigned int set) \ +{ \ + unsigned int res; \ + \ + res = read_c0_##name(); \ + res |= set; \ + write_c0_##name(res); \ + \ + return res; \ +} \ + \ +static inline unsigned int \ +clear_c0_##name(unsigned int clear) \ +{ \ + unsigned int res; \ + \ + res = read_c0_##name(); \ + res &= ~clear; \ + write_c0_##name(res); \ + \ + return res; \ +} \ + \ +static inline unsigned int \ +change_c0_##name(unsigned int change, unsigned int new) \ +{ \ + unsigned int res; \ + \ + res = read_c0_##name(); \ + res &= ~change; \ + res |= (new & change); \ + write_c0_##name(res); \ + \ + return res; \ +} + +__BUILD_SET_C0(status) +__BUILD_SET_C0(cause) +__BUILD_SET_C0(config) +__BUILD_SET_C0(intcontrol) +__BUILD_SET_C0(intctl) +__BUILD_SET_C0(srsmap) + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_MIPSREGS_H */ diff --git a/arch/mips/include/asm/posix_types.h b/arch/mips/include/asm/posix_types.h new file mode 100644 index 0000000000..879aae210b --- /dev/null +++ b/arch/mips/include/asm/posix_types.h @@ -0,0 +1,123 @@ +/* $Id: posix_types.h,v 1.6 2000/02/04 23:32:54 ralf Exp $ + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1997, 1998, 2000 by Ralf Baechle + */ +#ifndef _ASM_POSIX_TYPES_H +#define _ASM_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned int __kernel_dev_t; +typedef unsigned long __kernel_ino_t; +typedef unsigned int __kernel_mode_t; +typedef int __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef int __kernel_ipc_pid_t; +typedef int __kernel_uid_t; +typedef int __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef long __kernel_daddr_t; +typedef char * __kernel_caddr_t; + +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef int __kernel_uid32_t; +typedef int __kernel_gid32_t; +typedef __kernel_uid_t __kernel_old_uid_t; +typedef __kernel_gid_t __kernel_old_gid_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { + long val[2]; +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); +} + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *__p) +{ + unsigned long *__tmp = __p->fds_bits; + int __i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + __tmp[ 8] = 0; __tmp[ 9] = 0; + __tmp[10] = 0; __tmp[11] = 0; + __tmp[12] = 0; __tmp[13] = 0; + __tmp[14] = 0; __tmp[15] = 0; + return; + + case 8: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + return; + + case 4: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + return; + } + } + __i = __FDSET_LONGS; + while (__i) { + __i--; + *__tmp = 0; + __tmp++; + } +} + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif /* _ASM_POSIX_TYPES_H */ diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h new file mode 100644 index 0000000000..24858ddda5 --- /dev/null +++ b/arch/mips/include/asm/processor.h @@ -0,0 +1,142 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 Waldorf GMBH + * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle + * Copyright (C) 1996 Paul M. Antoine + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_PROCESSOR_H +#define _ASM_PROCESSOR_H + +#include <linux/config.h> + +#include <asm/isadep.h> + +#include <asm/cachectl.h> +#include <asm/mipsregs.h> +#include <asm/reg.h> +#include <asm/system.h> + +/* + * Return current * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +/* + * System setup and hardware flags.. + */ +extern void (*cpu_wait)(void); + +extern unsigned int vced_count, vcei_count; + +#define NUM_FPU_REGS 32 + +typedef __u64 fpureg_t; + +/* + * It would be nice to add some more fields for emulator statistics, but there + * are a number of fixed offsets in offset.h and elsewhere that would have to + * be recalculated by hand. So the additional information will be private to + * the FPU emulator for now. See asm-mips/fpu_emulator.h. + */ + +struct mips_fpu_struct { + fpureg_t fpr[NUM_FPU_REGS]; + unsigned int fcr31; +}; + +#define NUM_DSP_REGS 6 + +typedef __u32 dspreg_t; + +struct mips_dsp_state { + dspreg_t dspr[NUM_DSP_REGS]; + unsigned int dspcontrol; +}; + +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define ARCH_MIN_TASKALIGN 8 + +struct mips_abi; + +/* + * If you change thread_struct remember to change the #defines below too! + */ +struct thread_struct { + /* Saved main processor registers. */ + unsigned long reg16; + unsigned long reg17, reg18, reg19, reg20, reg21, reg22, reg23; + unsigned long reg29, reg30, reg31; + + /* Saved cp0 stuff. */ + unsigned long cp0_status; + + /* Saved fpu/fpu emulator stuff. */ + struct mips_fpu_struct fpu; +#ifdef CONFIG_MIPS_MT_FPAFF + /* Emulated instruction count */ + unsigned long emulated_fp; + /* Saved per-thread scheduler affinity mask */ + cpumask_t user_cpus_allowed; +#endif /* CONFIG_MIPS_MT_FPAFF */ + + /* Saved state of the DSP ASE, if available. */ + struct mips_dsp_state dsp; + + /* Other stuff associated with the thread. */ + unsigned long cp0_badvaddr; /* Last user fault */ + unsigned long cp0_baduaddr; /* Last kernel fault accessing USEG */ + unsigned long error_code; + unsigned long trap_no; + unsigned long irix_trampoline; /* Wheee... */ + unsigned long irix_oldctx; + struct mips_abi *abi; +}; + +struct task_struct; + +/* Free all resources held by a thread. */ +#define release_thread(thread) do { } while(0) + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +#define cpu_relax() barrier() + +/* + * Return_address is a replacement for __builtin_return_address(count) + * which on certain architectures cannot reasonably be implemented in GCC + * (MIPS, Alpha) or is unuseable with -fomit-frame-pointer (i386). + * Note that __builtin_return_address(x>=1) is forbidden because GCC + * aborts compilation on some CPUs. It's simply not possible to unwind + * some CPU's stackframes. + * + * __builtin_return_address works only for non-leaf functions. We avoid the + * overhead of a function call by forcing the compiler to save the return + * address register on the stack. + */ +#define return_address() ({__asm__ __volatile__("":::"$31");__builtin_return_address(0);}) + +#ifdef CONFIG_CPU_HAS_PREFETCH + +#define ARCH_HAS_PREFETCH + +static inline void prefetch(const void *addr) +{ + __asm__ __volatile__( + " .set mips4 \n" + " pref %0, (%1) \n" + " .set mips0 \n" + : + : "i" (Pref_Load), "r" (addr)); +} + +#endif + +#endif /* _ASM_PROCESSOR_H */ diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h new file mode 100644 index 0000000000..5659c0c873 --- /dev/null +++ b/arch/mips/include/asm/ptrace.h @@ -0,0 +1,87 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_PTRACE_H +#define _ASM_PTRACE_H + +/* 0 - 31 are integer registers, 32 - 63 are fp registers. */ +#define FPR_BASE 32 +#define PC 64 +#define CAUSE 65 +#define BADVADDR 66 +#define MMHI 67 +#define MMLO 68 +#define FPC_CSR 69 +#define FPC_EIR 70 +#define DSP_BASE 71 /* 3 more hi / lo register pairs */ +#define DSP_CONTROL 77 +#define ACX 78 + +/* + * This struct defines the way the registers are stored on the stack during a + * system call/exception. As usual the registers k0/k1 aren't being saved. + */ +struct pt_regs { +#ifdef CONFIG_32BIT + /* Pad bytes for argument save space on the stack. */ + unsigned long pad0[6]; +#endif + + /* Saved main processor registers. */ + unsigned long regs[32]; + + /* Saved special registers. */ + unsigned long cp0_status; + unsigned long hi; + unsigned long lo; +#ifdef CONFIG_CPU_HAS_SMARTMIPS + unsigned long acx; +#endif + unsigned long cp0_badvaddr; + unsigned long cp0_cause; + unsigned long cp0_epc; +#ifdef CONFIG_MIPS_MT_SMTC + unsigned long cp0_tcstatus; +#endif /* CONFIG_MIPS_MT_SMTC */ +} __attribute__ ((aligned (8))); + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 +/* #define PTRACE_GETFPXREGS 18 */ +/* #define PTRACE_SETFPXREGS 19 */ + +#define PTRACE_OLDSETOPTIONS 21 + +#define PTRACE_GET_THREAD_AREA 25 +#define PTRACE_SET_THREAD_AREA 26 + +/* Calls to trace a 64bit program from a 32bit program. */ +#define PTRACE_PEEKTEXT_3264 0xc0 +#define PTRACE_PEEKDATA_3264 0xc1 +#define PTRACE_POKETEXT_3264 0xc2 +#define PTRACE_POKEDATA_3264 0xc3 +#define PTRACE_GET_THREAD_AREA_3264 0xc4 + +#ifdef __KERNEL__ + +#include <asm/isadep.h> + +/* + * Does the process account for user or for system time? + */ +#define user_mode(regs) (((regs)->cp0_status & KU_MASK) == KU_USER) + +#define instruction_pointer(regs) ((regs)->cp0_epc) +#define profile_pc(regs) instruction_pointer(regs) + +#endif + +#endif /* _ASM_PTRACE_H */ diff --git a/arch/mips/include/asm/reboot.h b/arch/mips/include/asm/reboot.h new file mode 100644 index 0000000000..978d206816 --- /dev/null +++ b/arch/mips/include/asm/reboot.h @@ -0,0 +1,14 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1997, 1999, 2001, 06 by Ralf Baechle + * Copyright (C) 2001 MIPS Technologies, Inc. + */ +#ifndef _ASM_REBOOT_H +#define _ASM_REBOOT_H + +extern void _machine_restart(void); + +#endif /* _ASM_REBOOT_H */ diff --git a/arch/mips/include/asm/reg.h b/arch/mips/include/asm/reg.h new file mode 100644 index 0000000000..fc6bc0c169 --- /dev/null +++ b/arch/mips/include/asm/reg.h @@ -0,0 +1,126 @@ +/* + * Various register offset definitions for debuggers, core file + * examiners and whatnot. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1999 by Ralf Baechle + * Copyright (C) 1995, 1999 Silicon Graphics + */ +#ifndef __ASM_MIPS_REG_H +#define __ASM_MIPS_REG_H + +#if defined(CONFIG_32BIT) || defined(WANT_COMPAT_REG_H) + +#define EF_R0 6 +#define EF_R1 7 +#define EF_R2 8 +#define EF_R3 9 +#define EF_R4 10 +#define EF_R5 11 +#define EF_R6 12 +#define EF_R7 13 +#define EF_R8 14 +#define EF_R9 15 +#define EF_R10 16 +#define EF_R11 17 +#define EF_R12 18 +#define EF_R13 19 +#define EF_R14 20 +#define EF_R15 21 +#define EF_R16 22 +#define EF_R17 23 +#define EF_R18 24 +#define EF_R19 25 +#define EF_R20 26 +#define EF_R21 27 +#define EF_R22 28 +#define EF_R23 29 +#define EF_R24 30 +#define EF_R25 31 + +/* + * k0/k1 unsaved + */ +#define EF_R26 32 +#define EF_R27 33 + +#define EF_R28 34 +#define EF_R29 35 +#define EF_R30 36 +#define EF_R31 37 + +/* + * Saved special registers + */ +#define EF_LO 38 +#define EF_HI 39 + +#define EF_CP0_EPC 40 +#define EF_CP0_BADVADDR 41 +#define EF_CP0_STATUS 42 +#define EF_CP0_CAUSE 43 +#define EF_UNUSED0 44 + +#define EF_SIZE 180 + +#endif + +#ifdef CONFIG_64BIT + +#define EF_R0 0 +#define EF_R1 1 +#define EF_R2 2 +#define EF_R3 3 +#define EF_R4 4 +#define EF_R5 5 +#define EF_R6 6 +#define EF_R7 7 +#define EF_R8 8 +#define EF_R9 9 +#define EF_R10 10 +#define EF_R11 11 +#define EF_R12 12 +#define EF_R13 13 +#define EF_R14 14 +#define EF_R15 15 +#define EF_R16 16 +#define EF_R17 17 +#define EF_R18 18 +#define EF_R19 19 +#define EF_R20 20 +#define EF_R21 21 +#define EF_R22 22 +#define EF_R23 23 +#define EF_R24 24 +#define EF_R25 25 + +/* + * k0/k1 unsaved + */ +#define EF_R26 26 +#define EF_R27 27 + +#define EF_R28 28 +#define EF_R29 29 +#define EF_R30 30 +#define EF_R31 31 + +/* + * Saved special registers + */ +#define EF_LO 32 +#define EF_HI 33 + +#define EF_CP0_EPC 34 +#define EF_CP0_BADVADDR 35 +#define EF_CP0_STATUS 36 +#define EF_CP0_CAUSE 37 + +#define EF_SIZE 304 /* size in bytes */ + +#endif /* CONFIG_64BIT */ + +#endif /* __ASM_MIPS_REG_H */ diff --git a/arch/mips/include/asm/regdef.h b/arch/mips/include/asm/regdef.h new file mode 100644 index 0000000000..2e65cc3c43 --- /dev/null +++ b/arch/mips/include/asm/regdef.h @@ -0,0 +1,100 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1985 MIPS Computer Systems, Inc. + * Copyright (C) 1994, 95, 99, 2003 by Ralf Baechle + * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_REGDEF_H +#define _ASM_REGDEF_H + +#include <asm/sgidefs.h> + +#if _MIPS_SIM == _MIPS_SIM_ABI32 + +/* + * Symbolic register names for 32 bit ABI + */ +#define zero $0 /* wired zero */ +#define AT $1 /* assembler temp - uppercase because of ".set at" */ +#define v0 $2 /* return value */ +#define v1 $3 +#define a0 $4 /* argument registers */ +#define a1 $5 +#define a2 $6 +#define a3 $7 +#define t0 $8 /* caller saved */ +#define t1 $9 +#define t2 $10 +#define t3 $11 +#define t4 $12 +#define t5 $13 +#define t6 $14 +#define t7 $15 +#define s0 $16 /* callee saved */ +#define s1 $17 +#define s2 $18 +#define s3 $19 +#define s4 $20 +#define s5 $21 +#define s6 $22 +#define s7 $23 +#define t8 $24 /* caller saved */ +#define t9 $25 +#define jp $25 /* PIC jump register */ +#define k0 $26 /* kernel scratch */ +#define k1 $27 +#define gp $28 /* global pointer */ +#define sp $29 /* stack pointer */ +#define fp $30 /* frame pointer */ +#define s8 $30 /* same like fp! */ +#define ra $31 /* return address */ + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ + +#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 + +#define zero $0 /* wired zero */ +#define AT $at /* assembler temp - uppercase because of ".set at" */ +#define v0 $2 /* return value - caller saved */ +#define v1 $3 +#define a0 $4 /* argument registers */ +#define a1 $5 +#define a2 $6 +#define a3 $7 +#define a4 $8 /* arg reg 64 bit; caller saved in 32 bit */ +#define ta0 $8 +#define a5 $9 +#define ta1 $9 +#define a6 $10 +#define ta2 $10 +#define a7 $11 +#define ta3 $11 +#define t0 $12 /* caller saved */ +#define t1 $13 +#define t2 $14 +#define t3 $15 +#define s0 $16 /* callee saved */ +#define s1 $17 +#define s2 $18 +#define s3 $19 +#define s4 $20 +#define s5 $21 +#define s6 $22 +#define s7 $23 +#define t8 $24 /* caller saved */ +#define t9 $25 /* callee address for PIC/temp */ +#define jp $25 /* PIC jump register */ +#define k0 $26 /* kernel temporary */ +#define k1 $27 +#define gp $28 /* global pointer - caller saved for PIC */ +#define sp $29 /* stack pointer */ +#define fp $30 /* frame pointer */ +#define s8 $30 /* callee saved */ +#define ra $31 /* return address */ + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */ + +#endif /* _ASM_REGDEF_H */ diff --git a/arch/mips/include/asm/sgidefs.h b/arch/mips/include/asm/sgidefs.h new file mode 100644 index 0000000000..67f2658958 --- /dev/null +++ b/arch/mips/include/asm/sgidefs.h @@ -0,0 +1,44 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1999, 2001 Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) 2001 MIPS Technologies, Inc. + */ +#ifndef __ASM_SGIDEFS_H +#define __ASM_SGIDEFS_H + +/* + * Using a Linux compiler for building Linux seems logic but not to + * everybody. + */ +#if 0 /* ndef __linux__ */ +#error Use a Linux compiler or give up. +#endif + +/* + * Definitions for the ISA levels + * + * With the introduction of MIPS32 / MIPS64 instruction sets definitions + * MIPS ISAs are no longer subsets of each other. Therefore comparisons + * on these symbols except with == may result in unexpected results and + * are forbidden! + */ +#define _MIPS_ISA_MIPS1 1 +#define _MIPS_ISA_MIPS2 2 +#define _MIPS_ISA_MIPS3 3 +#define _MIPS_ISA_MIPS4 4 +#define _MIPS_ISA_MIPS5 5 +#define _MIPS_ISA_MIPS32 6 +#define _MIPS_ISA_MIPS64 7 + +/* + * Subprogram calling convention + */ +#define _MIPS_SIM_ABI32 1 +#define _MIPS_SIM_NABI32 2 +#define _MIPS_SIM_ABI64 3 + +#endif /* __ASM_SGIDEFS_H */ diff --git a/arch/mips/include/asm/string.h b/arch/mips/include/asm/string.h new file mode 100644 index 0000000000..579a591e62 --- /dev/null +++ b/arch/mips/include/asm/string.h @@ -0,0 +1,39 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1994, 95, 96, 97, 98, 2000, 01 Ralf Baechle + * Copyright (c) 2000 by Silicon Graphics, Inc. + * Copyright (c) 2001 MIPS Technologies, Inc. + */ +#ifndef _ASM_STRING_H +#define _ASM_STRING_H + +/* + * We don't do inline string functions, since the + * optimised inline asm versions are not small. + */ + +#undef __HAVE_ARCH_STRCPY +extern char *strcpy(char *__dest, __const__ char *__src); + +#undef __HAVE_ARCH_STRNCPY +extern char *strncpy(char *__dest, __const__ char *__src, __kernel_size_t __n); + +#undef __HAVE_ARCH_STRCMP +extern int strcmp(__const__ char *__cs, __const__ char *__ct); + +#undef __HAVE_ARCH_STRNCMP +extern int strncmp(__const__ char *__cs, __const__ char *__ct, __kernel_size_t __count); + +#undef __HAVE_ARCH_MEMSET +extern void *memset(void *__s, int __c, __kernel_size_t __count); + +#undef __HAVE_ARCH_MEMCPY +extern void *memcpy(void *__to, __const__ void *__from, __kernel_size_t __n); + +#undef __HAVE_ARCH_MEMMOVE +extern void *memmove(void *__dest, __const__ void *__src, __kernel_size_t __n); + +#endif /* _ASM_STRING_H */ diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h new file mode 100644 index 0000000000..b6d50e2f04 --- /dev/null +++ b/arch/mips/include/asm/system.h @@ -0,0 +1,268 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 1999 by Ralf Baechle + * Copyright (C) 1996 by Paul M. Antoine + * Copyright (C) 1994 - 1999 by Ralf Baechle + * + * Changed set_except_vector declaration to allow return of previous + * vector address value - necessary for "borrowing" vectors. + * + * Kevin D. Kissell, kevink@mips.org and Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. + */ +#ifndef _ASM_SYSTEM_H +#define _ASM_SYSTEM_H + +#include <linux/config.h> +#include <asm/sgidefs.h> +#include <asm/ptrace.h> +#if 0 +#include <linux/kernel.h> +#endif + +extern __inline__ void +__sti(void) +{ + __asm__ __volatile__( + ".set\tpush\n\t" + ".set\treorder\n\t" + ".set\tnoat\n\t" + "mfc0\t$1,$12\n\t" + "ori\t$1,0x1f\n\t" + "xori\t$1,0x1e\n\t" + "mtc0\t$1,$12\n\t" + ".set\tpop\n\t" + : /* no outputs */ + : /* no inputs */ + : "$1", "memory"); +} + +/* + * For cli() we have to insert nops to make shure that the new value + * has actually arrived in the status register before the end of this + * macro. + * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs + * no nops at all. + */ +extern __inline__ void +__cli(void) +{ + __asm__ __volatile__( + ".set\tpush\n\t" + ".set\treorder\n\t" + ".set\tnoat\n\t" + "mfc0\t$1,$12\n\t" + "ori\t$1,1\n\t" + "xori\t$1,1\n\t" + ".set\tnoreorder\n\t" + "mtc0\t$1,$12\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + ".set\tpop\n\t" + : /* no outputs */ + : /* no inputs */ + : "$1", "memory"); +} + +#define __save_flags(x) \ +__asm__ __volatile__( \ + ".set\tpush\n\t" \ + ".set\treorder\n\t" \ + "mfc0\t%0,$12\n\t" \ + ".set\tpop\n\t" \ + : "=r" (x)) + +#define __save_and_cli(x) \ +__asm__ __volatile__( \ + ".set\tpush\n\t" \ + ".set\treorder\n\t" \ + ".set\tnoat\n\t" \ + "mfc0\t%0,$12\n\t" \ + "ori\t$1,%0,1\n\t" \ + "xori\t$1,1\n\t" \ + ".set\tnoreorder\n\t" \ + "mtc0\t$1,$12\n\t" \ + "nop\n\t" \ + "nop\n\t" \ + "nop\n\t" \ + ".set\tpop\n\t" \ + : "=r" (x) \ + : /* no inputs */ \ + : "$1", "memory") + +#define __restore_flags(flags) \ +do { \ + unsigned long __tmp1; \ + \ + __asm__ __volatile__( \ + ".set\tnoreorder\t\t\t# __restore_flags\n\t" \ + ".set\tnoat\n\t" \ + "mfc0\t$1, $12\n\t" \ + "andi\t%0, 1\n\t" \ + "ori\t$1, 1\n\t" \ + "xori\t$1, 1\n\t" \ + "or\t%0, $1\n\t" \ + "mtc0\t%0, $12\n\t" \ + "nop\n\t" \ + "nop\n\t" \ + "nop\n\t" \ + ".set\tat\n\t" \ + ".set\treorder" \ + : "=r" (__tmp1) \ + : "0" (flags) \ + : "$1", "memory"); \ +} while(0) + +#ifdef CONFIG_SMP + +extern void __global_sti(void); +extern void __global_cli(void); +extern unsigned long __global_save_flags(void); +extern void __global_restore_flags(unsigned long); +# define sti() __global_sti() +# define cli() __global_cli() +# define save_flags(x) do { x = __global_save_flags(); } while (0) +# define restore_flags(x) __global_restore_flags(x) +# define save_and_cli(x) do { save_flags(x); cli(); } while(0) + +#else /* Single processor */ + +# define sti() __sti() +# define cli() __cli() +# define save_flags(x) __save_flags(x) +# define save_and_cli(x) __save_and_cli(x) +# define restore_flags(x) __restore_flags(x) + +#endif /* SMP */ + +/* For spinlocks etc */ +#define local_irq_save(x) __save_and_cli(x); +#define local_irq_restore(x) __restore_flags(x); +#define local_irq_disable() __cli(); +#define local_irq_enable() __sti(); + +/* + * These are probably defined overly paranoid ... + */ +#ifdef CONFIG_CPU_HAS_WB + +#include <asm/wbflush.h> +#define rmb() do { } while(0) +#define wmb() wbflush() +#define mb() wbflush() + +#else /* CONFIG_CPU_HAS_WB */ + +#define mb() \ +__asm__ __volatile__( \ + "# prevent instructions being moved around\n\t" \ + ".set\tnoreorder\n\t" \ + "# 8 nops to fool the R4400 pipeline\n\t" \ + "nop;nop;nop;nop;nop;nop;nop;nop\n\t" \ + ".set\treorder" \ + : /* no output */ \ + : /* no input */ \ + : "memory") +#define rmb() mb() +#define wmb() mb() + +#endif /* CONFIG_CPU_HAS_WB */ + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#endif + +#define set_mb(var, value) \ +do { var = value; mb(); } while (0) + +#define set_wmb(var, value) \ +do { var = value; wmb(); } while (0) + +#if !defined (_LANGUAGE_ASSEMBLY) +/* + * switch_to(n) should switch tasks to task nr n, first + * checking that n isn't the current task, in which case it does nothing. + */ +#if 0 +extern asmlinkage void *resume(void *last, void *next); +#endif +#endif /* !defined (_LANGUAGE_ASSEMBLY) */ + +#define prepare_to_switch() do { } while(0) +#define switch_to(prev,next,last) \ +do { \ + (last) = resume(prev, next); \ +} while(0) + +/* + * For 32 and 64 bit operands we can take advantage of ll and sc. + * FIXME: This doesn't work for R3000 machines. + */ +extern __inline__ unsigned long xchg_u32(volatile int * m, unsigned long val) +{ +#ifdef CONFIG_CPU_HAS_LLSC + unsigned long dummy; + + __asm__ __volatile__( + ".set\tnoreorder\t\t\t# xchg_u32\n\t" + ".set\tnoat\n\t" + "ll\t%0, %3\n" + "1:\tmove\t$1, %2\n\t" + "sc\t$1, %1\n\t" + "beqzl\t$1, 1b\n\t" + " ll\t%0, %3\n\t" + ".set\tat\n\t" + ".set\treorder" + : "=r" (val), "=o" (*m), "=r" (dummy) + : "o" (*m), "2" (val) + : "memory"); + + return val; +#else + unsigned long flags, retval; + + save_flags(flags); + cli(); + retval = *m; + *m = val; + restore_flags(flags); + return retval; +#endif /* Processor-dependent optimization */ +} + +#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) +#define tas(ptr) (xchg((ptr),1)) + +static __inline__ unsigned long +__xchg(unsigned long x, volatile void * ptr, int size) +{ + switch (size) { + case 4: + return xchg_u32(ptr, x); + } + return x; +} + +extern void *set_except_vector(int n, void *addr); + +extern void __die(const char *, struct pt_regs *, const char *where, + unsigned long line) __attribute__((noreturn)); +extern void __die_if_kernel(const char *, struct pt_regs *, const char *where, + unsigned long line); + +#define die(msg, regs) \ + __die(msg, regs, __FILE__ ":"__FUNCTION__, __LINE__) +#define die_if_kernel(msg, regs) \ + __die_if_kernel(msg, regs, __FILE__ ":"__FUNCTION__, __LINE__) + +#endif /* _ASM_SYSTEM_H */ diff --git a/arch/mips/include/asm/types.h b/arch/mips/include/asm/types.h new file mode 100644 index 0000000000..d4bb85999b --- /dev/null +++ b/arch/mips/include/asm/types.h @@ -0,0 +1,107 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_TYPES_H +#define _ASM_TYPES_H + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +/* + * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the + * header files exported to user space + */ + +typedef __signed__ char __s8; +typedef unsigned char __u8; + +typedef __signed__ short __s16; +typedef unsigned short __u16; + +typedef __signed__ int __s32; +typedef unsigned int __u32; + +#if (_MIPS_SZLONG == 64) + +typedef __signed__ long __s64; +typedef unsigned long __u64; + +#else + +#if defined(__GNUC__) +__extension__ typedef __signed__ long long __s64; +__extension__ typedef unsigned long long __u64; +#endif + +#endif + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG _MIPS_SZLONG + +#ifndef __ASSEMBLY__ + +typedef __signed char s8; +typedef unsigned char u8; + +typedef __signed short s16; +typedef unsigned short u16; + +typedef __signed int s32; +typedef unsigned int u32; + +#if (_MIPS_SZLONG == 64) + +typedef __signed__ long s64; +typedef unsigned long u64; + +#else + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) +typedef __signed__ long long s64; +typedef unsigned long long u64; +#endif + +#endif + +#if (defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) \ + || defined(CONFIG_64BIT) +typedef u64 dma_addr_t; + +typedef u64 phys_addr_t; +typedef u64 phys_size_t; + +#else +typedef u32 dma_addr_t; + +typedef u32 phys_addr_t; +typedef u32 phys_size_t; + +#endif +typedef u64 dma64_addr_t; + +/* + * Don't use phys_t. You've been warned. + */ +#ifdef CONFIG_64BIT_PHYS_ADDR +typedef unsigned long long phys_t; +#else +typedef unsigned long phys_t; +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_TYPES_H */ diff --git a/arch/mips/include/asm/u-boot.h b/arch/mips/include/asm/u-boot.h new file mode 100644 index 0000000000..d9c14caf4a --- /dev/null +++ b/arch/mips/include/asm/u-boot.h @@ -0,0 +1,48 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + ******************************************************************** + * NOTE: This header file defines an interface to U-Boot. Including + * this (unmodified) header file in another file is considered normal + * use of U-Boot, and does *not* fall under the heading of "derived + * work". + ******************************************************************** + */ + +#ifndef _U_BOOT_H_ +#define _U_BOOT_H_ 1 + +typedef struct bd_info { + int bi_baudrate; /* serial console baudrate */ + unsigned long bi_ip_addr; /* IP Address */ + unsigned long bi_arch_number; /* unique id for this board */ + unsigned long bi_boot_params; /* where this board expects params */ + unsigned long bi_memstart; /* start of DRAM memory */ + phys_size_t bi_memsize; /* size of DRAM memory in bytes */ + unsigned long bi_flashstart; /* start of FLASH memory */ + unsigned long bi_flashsize; /* size of FLASH memory */ + unsigned long bi_flashoffset; /* reserved area for startup monitor */ +} bd_t; +#define bi_env_data bi_env->data +#define bi_env_crc bi_env->crc + +#endif /* _U_BOOT_H_ */ diff --git a/arch/mips/include/asm/unaligned.h b/arch/mips/include/asm/unaligned.h new file mode 100644 index 0000000000..1d5112ea69 --- /dev/null +++ b/arch/mips/include/asm/unaligned.h @@ -0,0 +1,26 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef _ASM_MIPS_UNALIGNED_H +#define _ASM_MIPS_UNALIGNED_H + +#include <compiler.h> +#if defined(__MIPSEB__) +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be +#elif defined(__MIPSEL__) +#define get_unaligned __get_unaligned_le +#define put_unaligned __put_unaligned_le +#else +#error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???" +#endif + +#include <linux/unaligned/le_byteshift.h> +#include <linux/unaligned/be_byteshift.h> +#include <linux/unaligned/generic.h> + +#endif /* _ASM_MIPS_UNALIGNED_H */ |