diff options
Diffstat (limited to 'arch/powerpc/cpu/mpc824x/cpu_init.c')
| -rw-r--r-- | arch/powerpc/cpu/mpc824x/cpu_init.c | 417 |
1 files changed, 417 insertions, 0 deletions
diff --git a/arch/powerpc/cpu/mpc824x/cpu_init.c b/arch/powerpc/cpu/mpc824x/cpu_init.c new file mode 100644 index 0000000000..395f7767d1 --- /dev/null +++ b/arch/powerpc/cpu/mpc824x/cpu_init.c @@ -0,0 +1,417 @@ +/* + * (C) Copyright 2000 + * Rob Taylor. Flying Pig Systems. robt@flyingpig.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <mpc824x.h> + +#ifndef CONFIG_SYS_BANK0_ROW +#define CONFIG_SYS_BANK0_ROW 0 +#endif +#ifndef CONFIG_SYS_BANK1_ROW +#define CONFIG_SYS_BANK1_ROW 0 +#endif +#ifndef CONFIG_SYS_BANK2_ROW +#define CONFIG_SYS_BANK2_ROW 0 +#endif +#ifndef CONFIG_SYS_BANK3_ROW +#define CONFIG_SYS_BANK3_ROW 0 +#endif +#ifndef CONFIG_SYS_BANK4_ROW +#define CONFIG_SYS_BANK4_ROW 0 +#endif +#ifndef CONFIG_SYS_BANK5_ROW +#define CONFIG_SYS_BANK5_ROW 0 +#endif +#ifndef CONFIG_SYS_BANK6_ROW +#define CONFIG_SYS_BANK6_ROW 0 +#endif +#ifndef CONFIG_SYS_BANK7_ROW +#define CONFIG_SYS_BANK7_ROW 0 +#endif +#ifndef CONFIG_SYS_DBUS_SIZE2 +#define CONFIG_SYS_DBUS_SIZE2 0 +#endif + +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + */ +void +cpu_init_f (void) +{ +/* MOUSSE board is initialized in asm */ +#if !defined(CONFIG_MOUSSE) && !defined(CONFIG_BMW) + register unsigned long val; + CONFIG_WRITE_HALFWORD(PCICR, 0x06); /* Bus Master, respond to PCI memory space acesses*/ +/* CONFIG_WRITE_HALFWORD(PCISR, 0xffff); */ /*reset PCISR*/ + +#if defined(CONFIG_MUSENKI) || defined(CONFIG_PN62) +/* Why is this here, you ask? Try, just try setting 0x8000 + * in PCIACR with CONFIG_WRITE_HALFWORD() + * this one was a stumper, and we are annoyed + */ + +#define M_CONFIG_WRITE_HALFWORD( addr, data ) \ + __asm__ __volatile__(" \ + stw %2,0(%0)\n \ + sync\n \ + sth %3,2(%1)\n \ + sync\n \ + " \ + : /* no output */ \ + : "r" (CONFIG_ADDR), "r" (CONFIG_DATA), \ + "r" (PCISWAP(addr & ~3)), "r" (PCISWAP(data << 16)) \ + ); + + M_CONFIG_WRITE_HALFWORD(PCIACR, 0x8000); +#endif + + CONFIG_WRITE_BYTE(PCLSR, 0x8); /* set PCI cache line size */ + CONFIG_WRITE_BYTE (PLTR, 0x40); /* set PCI latency timer */ + /* + * Note that although this bit is cleared after a hard reset, it + * must be explicitly set and then cleared by software during + * initialization in order to guarantee correct operation of the + * DLL and the SDRAM_CLK[0:3] signals (if they are used). + */ + CONFIG_READ_BYTE (AMBOR, val); + CONFIG_WRITE_BYTE(AMBOR, val & 0xDF); + CONFIG_WRITE_BYTE(AMBOR, val | 0x20); + CONFIG_WRITE_BYTE(AMBOR, val & 0xDF); +#ifdef CONFIG_MPC8245 + /* silicon bug 28 MPC8245 */ + CONFIG_READ_BYTE(AMBOR,val); + CONFIG_WRITE_BYTE(AMBOR,val|0x1); + +#if 0 + /* + * The following bug only affects older (XPC8245) processors. + * DMA transfers initiated by external devices get corrupted due + * to a hardware scheduling problem. + * + * The effect is: + * when transferring X words, the first 32 words are transferred + * OK, the next 3 x 32 words are 'old' data (from previous DMA) + * while the rest of the X words is xferred fine. + * + * Disabling 3 of the 4 32 word hardware buffers solves the problem + * with no significant performance loss. + */ + + CONFIG_READ_BYTE(PCMBCR,val); + /* in order not to corrupt data which is being read over the PCI bus + * with the PPC as slave, we need to reduce the number of PCMRBs to 1, + * 4.11 in the processor user manual + * */ + +#if 1 + CONFIG_WRITE_BYTE(PCMBCR,(val|0xC0)); /* 1 PCMRB */ +#else + CONFIG_WRITE_BYTE(PCMBCR,(val|0x80)); /* 2 PCMRBs */ + CONFIG_WRITE_BYTE(PCMBCR,(val|0x40)); /* 3 PCMRBs */ + /* default, 4 PCMRBs are used */ +#endif +#endif +#endif + + CONFIG_READ_WORD(PICR1, val); +#if defined(CONFIG_MPC8240) + CONFIG_WRITE_WORD( PICR1, + (val & (PICR1_ADDRESS_MAP | PICR1_RCS0)) | + PIRC1_MSK | PICR1_PROC_TYPE_603E | + PICR1_FLASH_WR_EN | PICR1_MCP_EN | + PICR1_CF_DPARK | PICR1_EN_PCS | + PICR1_CF_APARK ); +#elif defined(CONFIG_MPC8245) + CONFIG_WRITE_WORD( PICR1, + (val & (PICR1_RCS0)) | + PICR1_PROC_TYPE_603E | + PICR1_FLASH_WR_EN | PICR1_MCP_EN | + PICR1_CF_DPARK | PICR1_NO_BUSW_CK | + PICR1_DEC| PICR1_CF_APARK | 0x10); /* 8245 UM says bit 4 must be set */ +#else +#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) +#endif + + CONFIG_READ_WORD(PICR2, val); + val= val & ~ (PICR2_CF_SNOOP_WS_MASK | PICR2_CF_APHASE_WS_MASK); /*mask off waitstate bits*/ +#ifndef CONFIG_PN62 + val |= PICR2_CF_SNOOP_WS_1WS | PICR2_CF_APHASE_WS_1WS; /*1 wait state*/ +#endif + CONFIG_WRITE_WORD(PICR2, val); + + CONFIG_WRITE_WORD(EUMBBAR, CONFIG_SYS_EUMB_ADDR); +#ifndef CONFIG_SYS_RAMBOOT + CONFIG_WRITE_WORD(MCCR1, (CONFIG_SYS_ROMNAL << MCCR1_ROMNAL_SHIFT) | + (CONFIG_SYS_BANK0_ROW) | + (CONFIG_SYS_BANK1_ROW << MCCR1_BANK1ROW_SHIFT) | + (CONFIG_SYS_BANK2_ROW << MCCR1_BANK2ROW_SHIFT) | + (CONFIG_SYS_BANK3_ROW << MCCR1_BANK3ROW_SHIFT) | + (CONFIG_SYS_BANK4_ROW << MCCR1_BANK4ROW_SHIFT) | + (CONFIG_SYS_BANK5_ROW << MCCR1_BANK5ROW_SHIFT) | + (CONFIG_SYS_BANK6_ROW << MCCR1_BANK6ROW_SHIFT) | + (CONFIG_SYS_BANK7_ROW << MCCR1_BANK7ROW_SHIFT) | + (CONFIG_SYS_ROMFAL << MCCR1_ROMFAL_SHIFT)); +#endif + +#if defined(CONFIG_SYS_ASRISE) && defined(CONFIG_SYS_ASFALL) + CONFIG_WRITE_WORD(MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT | + CONFIG_SYS_ASRISE << MCCR2_ASRISE_SHIFT | + CONFIG_SYS_ASFALL << MCCR2_ASFALL_SHIFT); +#else + CONFIG_WRITE_WORD(MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT); +#endif + +#if defined(CONFIG_MPC8240) + CONFIG_WRITE_WORD(MCCR3, + (((CONFIG_SYS_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) | + (CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT) | + (CONFIG_SYS_RDLAT << MCCR3_RDLAT_SHIFT)); +#elif defined(CONFIG_MPC8245) + CONFIG_WRITE_WORD(MCCR3, + (((CONFIG_SYS_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) | + (CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT)); +#else +#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) +#endif + +/* this is gross. We think these should all be the same, and various boards + * should define CONFIG_SYS_ACTORW to 0 if they don't want to set it, or even, if + * its not set, we define it to zero in this file + */ +#if defined(CONFIG_CU824) || defined(CONFIG_PN62) + CONFIG_WRITE_WORD(MCCR4, + (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) | + (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | + MCCR4_BIT21 | + (CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) | + ((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) | + (((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) | + CONFIG_SYS_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) | + (CONFIG_SYS_ACTORW << MCCR4_ACTTORW_SHIFT) | + (((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) << MCCR4_BSTOPRE6TO9_SHIFT)); +#elif defined(CONFIG_MPC8240) + CONFIG_WRITE_WORD(MCCR4, + (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) | + (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | + MCCR4_BIT21 | + (CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) | + ((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) | + (((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) | + (CONFIG_SYS_SDMODE_BURSTLEN)) <<MCCR4_SDMODE_SHIFT) | + (((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT )); +#elif defined(CONFIG_MPC8245) + CONFIG_READ_WORD(MCCR1, val); + val &= MCCR1_DBUS_SIZE0; /* test for 64-bit mem bus */ + + CONFIG_WRITE_WORD(MCCR4, + (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) | + (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | + (CONFIG_SYS_EXTROM ? MCCR4_EXTROM : 0) | + (CONFIG_SYS_REGDIMM ? MCCR4_REGDIMM : 0) | + (CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) | + ((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) | + (CONFIG_SYS_DBUS_SIZE2 << MCCR4_DBUS_SIZE2_SHIFT) | + (((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) | + (val ? 2 : 3)) << MCCR4_SDMODE_SHIFT) | + (CONFIG_SYS_ACTORW << MCCR4_ACTTORW_SHIFT) | + (((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT )); +#else +#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) +#endif + + CONFIG_WRITE_WORD(MSAR1, + ( (CONFIG_SYS_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) | + (((CONFIG_SYS_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | + (((CONFIG_SYS_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | + (((CONFIG_SYS_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(EMSAR1, + ( (CONFIG_SYS_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) | + (((CONFIG_SYS_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | + (((CONFIG_SYS_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | + (((CONFIG_SYS_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(MSAR2, + ( (CONFIG_SYS_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) | + (((CONFIG_SYS_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | + (((CONFIG_SYS_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | + (((CONFIG_SYS_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(EMSAR2, + ( (CONFIG_SYS_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) | + (((CONFIG_SYS_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | + (((CONFIG_SYS_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | + (((CONFIG_SYS_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(MEAR1, + ( (CONFIG_SYS_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) | + (((CONFIG_SYS_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | + (((CONFIG_SYS_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | + (((CONFIG_SYS_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(EMEAR1, + ( (CONFIG_SYS_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) | + (((CONFIG_SYS_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | + (((CONFIG_SYS_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | + (((CONFIG_SYS_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(MEAR2, + ( (CONFIG_SYS_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) | + (((CONFIG_SYS_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | + (((CONFIG_SYS_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | + (((CONFIG_SYS_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(EMEAR2, + ( (CONFIG_SYS_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) | + (((CONFIG_SYS_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | + (((CONFIG_SYS_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | + (((CONFIG_SYS_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)); + + CONFIG_WRITE_BYTE(ODCR, CONFIG_SYS_ODCR); +#ifdef CONFIG_SYS_DLL_MAX_DELAY + CONFIG_WRITE_BYTE(MIOCR1, CONFIG_SYS_DLL_MAX_DELAY); /* needed to make DLL lock */ +#endif +#if defined(CONFIG_SYS_DLL_EXTEND) && defined(CONFIG_SYS_PCI_HOLD_DEL) + CONFIG_WRITE_BYTE(PMCR2, CONFIG_SYS_DLL_EXTEND | CONFIG_SYS_PCI_HOLD_DEL); +#endif +#if defined(MIOCR2) && defined(CONFIG_SYS_SDRAM_DSCD) + CONFIG_WRITE_BYTE(MIOCR2, CONFIG_SYS_SDRAM_DSCD); /* change memory input */ +#endif /* setup & hold time */ + + CONFIG_WRITE_BYTE(MBER, + CONFIG_SYS_BANK0_ENABLE | + (CONFIG_SYS_BANK1_ENABLE << 1) | + (CONFIG_SYS_BANK2_ENABLE << 2) | + (CONFIG_SYS_BANK3_ENABLE << 3) | + (CONFIG_SYS_BANK4_ENABLE << 4) | + (CONFIG_SYS_BANK5_ENABLE << 5) | + (CONFIG_SYS_BANK6_ENABLE << 6) | + (CONFIG_SYS_BANK7_ENABLE << 7)); + +#ifdef CONFIG_SYS_PGMAX + CONFIG_WRITE_BYTE(MPMR, CONFIG_SYS_PGMAX); +#endif + + /* ! Wait 200us before initialize other registers */ + /*FIXME: write a decent udelay wait */ + __asm__ __volatile__( + " mtctr %0 \n \ + 0: bdnz 0b\n" + : + : "r" (0x10000)); + + CONFIG_READ_WORD(MCCR1, val); + CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */ + __asm__ __volatile__("eieio"); + +#endif /* !CONFIG_MOUSSE && !CONFIG_BMW */ +} + + +#ifdef CONFIG_MOUSSE +#ifdef INCLUDE_MPC107_REPORT +struct MPC107_s { + unsigned int iobase; + char desc[120]; +} MPC107Regs[] = { + { BMC_BASE + 0x00, "MPC107 Vendor/Device ID" }, + { BMC_BASE + 0x04, "MPC107 PCI Command/Status Register" }, + { BMC_BASE + 0x08, "MPC107 Revision" }, + { BMC_BASE + 0x0C, "MPC107 Cache Line Size" }, + { BMC_BASE + 0x10, "MPC107 LMBAR" }, + { BMC_BASE + 0x14, "MPC824x PCSR" }, + { BMC_BASE + 0xA8, "MPC824x PICR1" }, + { BMC_BASE + 0xAC, "MPC824x PICR2" }, + { BMC_BASE + 0x46, "MPC824x PACR" }, + { BMC_BASE + 0x310, "MPC824x ITWR" }, + { BMC_BASE + 0x300, "MPC824x OMBAR" }, + { BMC_BASE + 0x308, "MPC824x OTWR" }, + { BMC_BASE + 0x14, "MPC107 Peripheral Control and Status Register" }, + { BMC_BASE + 0x78, "MPC107 EUMBAR" }, + { BMC_BASE + 0xC0, "MPC107 Processor Bus Error Status" }, + { BMC_BASE + 0xC4, "MPC107 PCI Bus Error Status" }, + { BMC_BASE + 0xC8, "MPC107 Processor/PCI Error Address" }, + { BMC_BASE + 0xE0, "MPC107 AMBOR Register" }, + { BMC_BASE + 0xF0, "MPC107 MCCR1 Register" }, + { BMC_BASE + 0xF4, "MPC107 MCCR2 Register" }, + { BMC_BASE + 0xF8, "MPC107 MCCR3 Register" }, + { BMC_BASE + 0xFC, "MPC107 MCCR4 Register" }, +}; +#define N_MPC107_Regs (sizeof(MPC107Regs)/sizeof(MPC107Regs[0])) +#endif /* INCLUDE_MPC107_REPORT */ +#endif /* CONFIG_MOUSSE */ + +/* + * initialize higher level parts of CPU like time base and timers + */ +int cpu_init_r (void) +{ +#ifdef CONFIG_MOUSSE +#ifdef INCLUDE_MPC107_REPORT + unsigned int tmp = 0, i; +#endif + /* + * Initialize the EUMBBAR (Embedded Util Mem Block Base Addr Reg). + * This is necessary before the EPIC, DMA ctlr, I2C ctlr, etc. can + * be accessed. + */ + +#ifdef CONFIG_MPC8240 /* only on MPC8240 */ + mpc824x_mpc107_setreg (EUMBBAR, EUMBBAR_VAL); + /* MOT/SPS: Issue #10002, PCI (FD Alias enable) */ + mpc824x_mpc107_setreg (AMBOR, 0x000000C0); +#endif + + +#ifdef INCLUDE_MPC107_REPORT + /* Check MPC824x PCI Device and Vendor ID */ + while ((tmp = mpc824x_mpc107_getreg (BMC_BASE)) != 0x31057) { + printf (" MPC107: offset=0x%x, val = 0x%x\n", + BMC_BASE, + tmp); + } + + for (i = 0; i < N_MPC107_Regs; i++) { + printf (" 0x%x/%s = 0x%x\n", + MPC107Regs[i].iobase, + MPC107Regs[i].desc, + mpc824x_mpc107_getreg (MPC107Regs[i].iobase)); + } + + printf ("IBAT0L = 0x%08X\n", mfspr (IBAT0L)); + printf ("IBAT0U = 0x%08X\n", mfspr (IBAT0U)); + printf ("IBAT1L = 0x%08X\n", mfspr (IBAT1L)); + printf ("IBAT1U = 0x%08X\n", mfspr (IBAT1U)); + printf ("IBAT2L = 0x%08X\n", mfspr (IBAT2L)); + printf ("IBAT2U = 0x%08X\n", mfspr (IBAT2U)); + printf ("IBAT3L = 0x%08X\n", mfspr (IBAT3L)); + printf ("IBAT3U = 0x%08X\n", mfspr (IBAT3U)); + printf ("DBAT0L = 0x%08X\n", mfspr (DBAT0L)); + printf ("DBAT0U = 0x%08X\n", mfspr (DBAT0U)); + printf ("DBAT1L = 0x%08X\n", mfspr (DBAT1L)); + printf ("DBAT1U = 0x%08X\n", mfspr (DBAT1U)); + printf ("DBAT2L = 0x%08X\n", mfspr (DBAT2L)); + printf ("DBAT2U = 0x%08X\n", mfspr (DBAT2U)); + printf ("DBAT3L = 0x%08X\n", mfspr (DBAT3L)); + printf ("DBAT3U = 0x%08X\n", mfspr (DBAT3U)); +#endif /* INCLUDE_MPC107_REPORT */ +#endif /* CONFIG_MOUSSE */ + return (0); +} |