diff options
Diffstat (limited to 'arch/powerpc/cpu/mpc8260/cpu.c')
| -rw-r--r-- | arch/powerpc/cpu/mpc8260/cpu.c | 338 |
1 files changed, 338 insertions, 0 deletions
diff --git a/arch/powerpc/cpu/mpc8260/cpu.c b/arch/powerpc/cpu/mpc8260/cpu.c new file mode 100644 index 0000000000..aedbf297ab --- /dev/null +++ b/arch/powerpc/cpu/mpc8260/cpu.c @@ -0,0 +1,338 @@ +/* + * (C) Copyright 2000-2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * CPU specific code for the MPC825x / MPC826x / MPC827x / MPC828x + * + * written or collected and sometimes rewritten by + * Magnus Damm <damm@bitsmart.com> + * + * modified by + * Wolfgang Denk <wd@denx.de> + * + * modified for 8260 by + * Murray Jensen <Murray.Jensen@cmst.csiro.au> + * + * added 8260 masks by + * Marius Groeger <mag@sysgo.de> + * + * added HiP7 (824x/827x/8280) processors support by + * Yuli Barcohen <yuli@arabellasw.com> + */ + +#include <common.h> +#include <watchdog.h> +#include <command.h> +#include <mpc8260.h> +#include <netdev.h> +#include <asm/processor.h> +#include <asm/cpm_8260.h> + +#if defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#include <libfdt_env.h> +#include <fdt_support.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_GET_CPU_STR_F) +extern int get_cpu_str_f (char *buf); +#endif + +int checkcpu (void) +{ + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + ulong clock = gd->cpu_clk; + uint pvr = get_pvr (); + uint immr, rev, m, k; + char buf[32]; + + puts ("CPU: "); + + switch (pvr) { + case PVR_8260: + case PVR_8260_HIP3: + k = 3; + break; + case PVR_8260_HIP4: + k = 4; + break; + case PVR_8260_HIP7R1: + case PVR_8260_HIP7RA: + case PVR_8260_HIP7: + k = 7; + break; + default: + return -1; /* whoops! not an MPC8260 */ + } + rev = pvr & 0xff; + + immr = immap->im_memctl.memc_immr; + if ((immr & IMMR_ISB_MSK) != CONFIG_SYS_IMMR) + return -1; /* whoops! someone moved the IMMR */ + +#if defined(CONFIG_GET_CPU_STR_F) + get_cpu_str_f (buf); + printf ("%s (HiP%d Rev %02x, Mask ", buf, k, rev); +#else + printf (CPU_ID_STR " (HiP%d Rev %02x, Mask ", k, rev); +#endif + + /* + * the bottom 16 bits of the immr are the Part Number and Mask Number + * (4-34); the 16 bits at PROFF_REVNUM (0x8af0) in dual port ram is the + * RISC Microcode Revision Number (13-10). + * For the 8260, Motorola doesn't include the Microcode Revision + * in the mask. + */ + m = immr & (IMMR_PARTNUM_MSK | IMMR_MASKNUM_MSK); + k = *((ushort *) & immap->im_dprambase[PROFF_REVNUM]); + + switch (m) { + case 0x0000: + puts ("0.2 2J24M"); + break; + case 0x0010: + puts ("A.0 K22A"); + break; + case 0x0011: + puts ("A.1 1K22A-XC"); + break; + case 0x0001: + puts ("B.1 1K23A"); + break; + case 0x0021: + puts ("B.2 2K23A-XC"); + break; + case 0x0023: + puts ("B.3 3K23A"); + break; + case 0x0024: + puts ("C.2 6K23A"); + break; + case 0x0060: + puts ("A.0(A) 2K25A"); + break; + case 0x0062: + puts ("B.1 4K25A"); + break; + case 0x0064: + puts ("C.0 5K25A"); + break; + case 0x0A00: + puts ("0.0 0K49M"); + break; + case 0x0A01: + puts ("0.1 1K49M"); + break; + case 0x0A10: + puts ("1.0 1K49M"); + break; + case 0x0C00: + puts ("0.0 0K50M"); + break; + case 0x0C10: + puts ("1.0 1K50M"); + break; + case 0x0D00: + puts ("0.0 0K50M"); + break; + case 0x0D10: + puts ("1.0 1K50M"); + break; + default: + printf ("unknown [immr=0x%04x,k=0x%04x]", m, k); + break; + } + + printf (") at %s MHz\n", strmhz (buf, clock)); + + return 0; +} + +/* ------------------------------------------------------------------------- */ +/* configures a UPM by writing into the UPM RAM array */ +/* uses bank 11 and a dummy physical address (=BRx_BA_MSK) */ +/* NOTE: the physical address chosen must not overlap into any other area */ +/* mapped by the memory controller because bank 11 has the lowest priority */ + +void upmconfig (uint upm, uint * table, uint size) +{ + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + volatile memctl8260_t *memctl = &immap->im_memctl; + volatile uchar *dummy = (uchar *) BRx_BA_MSK; /* set all BA bits */ + uint i; + + /* first set up bank 11 to reference the correct UPM at a dummy address */ + + memctl->memc_or11 = ORxU_AM_MSK; /* set all AM bits */ + + switch (upm) { + + case UPMA: + memctl->memc_br11 = + ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMA | + BRx_V; + memctl->memc_mamr = MxMR_OP_WARR; + break; + + case UPMB: + memctl->memc_br11 = + ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMB | + BRx_V; + memctl->memc_mbmr = MxMR_OP_WARR; + break; + + case UPMC: + memctl->memc_br11 = + ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMC | + BRx_V; + memctl->memc_mcmr = MxMR_OP_WARR; + break; + + default: + panic ("upmconfig passed invalid UPM number (%u)\n", upm); + break; + + } + + /* + * at this point, the dummy address is set up to access the selected UPM, + * the MAD pointer is zero, and the MxMR OP is set for writing to RAM + * + * now we simply load the mdr with each word and poke the dummy address. + * the MAD is incremented on each access. + */ + + for (i = 0; i < size; i++) { + memctl->memc_mdr = table[i]; + *dummy = 0; + } + + /* now kill bank 11 */ + memctl->memc_br11 = 0; +} + +/* ------------------------------------------------------------------------- */ + +#if !defined(CONFIG_HAVE_OWN_RESET) +int +do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + ulong msr, addr; + + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + + immap->im_clkrst.car_rmr = RMR_CSRE; /* Checkstop Reset enable */ + + /* Interrupts and MMU off */ + __asm__ __volatile__ ("mfmsr %0":"=r" (msr):); + + msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR); + __asm__ __volatile__ ("mtmsr %0"::"r" (msr)); + + /* + * Trying to execute the next instruction at a non-existing address + * should cause a machine check, resulting in reset + */ +#ifdef CONFIG_SYS_RESET_ADDRESS + addr = CONFIG_SYS_RESET_ADDRESS; +#else + /* + * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE + * - sizeof (ulong) is usually a valid address. Better pick an address + * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS. + */ + addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong); +#endif + ((void (*)(void)) addr) (); + return 1; + +} +#endif /* CONFIG_HAVE_OWN_RESET */ + +/* ------------------------------------------------------------------------- */ + +/* + * Get timebase clock frequency (like cpu_clk in Hz) + * + */ +unsigned long get_tbclk (void) +{ + ulong tbclk; + + tbclk = (gd->bus_clk + 3L) / 4L; + + return (tbclk); +} + +/* ------------------------------------------------------------------------- */ + +#if defined(CONFIG_WATCHDOG) +void watchdog_reset (void) +{ + int re_enable = disable_interrupts (); + + reset_8260_watchdog ((immap_t *) CONFIG_SYS_IMMR); + if (re_enable) + enable_interrupts (); +} +#endif /* CONFIG_WATCHDOG */ + +/* ------------------------------------------------------------------------- */ +#if defined(CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP) +void ft_cpu_setup (void *blob, bd_t *bd) +{ +#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\ + defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) + fdt_fixup_ethernet(blob); +#endif + + do_fixup_by_compat_u32(blob, "fsl,cpm2-brg", + "clock-frequency", bd->bi_brgfreq, 1); + + do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, + "bus-frequency", bd->bi_busfreq, 1); + do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, + "timebase-frequency", OF_TBCLK, 1); + do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, + "clock-frequency", bd->bi_intfreq, 1); + fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); +} +#endif /* CONFIG_OF_LIBFDT */ + +/* + * Initializes on-chip ethernet controllers. + * to override, implement board_eth_init() + */ +int cpu_eth_init(bd_t *bis) +{ +#if defined(CONFIG_ETHER_ON_FCC) + fec_initialize(bis); +#endif +#if defined(CONFIG_ETHER_ON_SCC) + mpc82xx_scc_enet_initialize(bis); +#endif + return 0; +} |