diff options
Diffstat (limited to 'arch/powerpc/cpu/mpc85xx')
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/release.S | 41 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/speed.c | 20 |
2 files changed, 28 insertions, 33 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index 467ea1045d..a4a21b037c 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -154,16 +154,12 @@ __secondary_start_page: ori r3,r3,toreset(__spin_table_addr)@l lwz r3,0(r3) - /* - * r10 has the base address for the entry. - * we cannot access it yet before setting up a new TLB - */ mfspr r0,SPRN_PIR #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* * PIR definition for Chassis 2 * 0-17 Reserved (logic 0s) - * 8-19 CHIP_ID, 2'b00 - SoC 1 + * 18-19 CHIP_ID, 2'b00 - SoC 1 * all others - reserved * 20-24 CLUSTER_ID 5'b00000 - CCM 1 * all others - reserved @@ -177,32 +173,33 @@ __secondary_start_page: * 2'b11 - core 3 * 29-31 THREAD_ID 3'b000 - thread 0 * 3'b001 - thread 1 + * + * Power-on PIR increments threads by 0x01, cores within a cluster by 0x08 + * and clusters by 0x20. + * + * We renumber PIR so that all threads in the system are consecutive. */ - rlwinm r4,r0,29,25,31 + + rlwinm r8,r0,29,0x03 /* r8 = core within cluster */ + srwi r10,r0,5 /* r10 = cluster */ + + mulli r5,r10,CONFIG_SYS_FSL_CORES_PER_CLUSTER + add r5,r5,r8 /* for spin table index */ + mulli r4,r5,CONFIG_SYS_FSL_THREADS_PER_CORE /* for PIR */ #elif defined(CONFIG_E500MC) rlwinm r4,r0,27,27,31 + mr r5,r4 #else mr r4,r0 + mr r5,r4 #endif - slwi r8,r4,6 /* spin table is padded to 64 byte */ - add r10,r3,r8 -#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 - mfspr r0,SPRN_PIR /* - * core 0 thread 0: pir reset value 0x00, new pir 0 - * core 0 thread 1: pir reset value 0x01, new pir 1 - * core 1 thread 0: pir reset value 0x08, new pir 2 - * core 1 thread 1: pir reset value 0x09, new pir 3 - * core 2 thread 0: pir reset value 0x10, new pir 4 - * core 2 thread 1: pir reset value 0x11, new pir 5 - * etc. - * - * Only thread 0 of each core will be running, updating PIR doesn't - * need to deal with the thread bits. + * r10 has the base address for the entry. + * we cannot access it yet before setting up a new TLB */ - rlwinm r4,r0,30,24,30 -#endif + slwi r8,r5,6 /* spin table is padded to 64 byte */ + add r10,r3,r8 mtspr SPRN_PIR,r4 /* write to PIR register */ diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index f00b1abe63..a4d6e9cc73 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -112,23 +112,20 @@ void get_sys_info (sys_info_t * sysInfo) #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* * Each cluster has up to 4 cores, sharing the same PLL selection. - * The cluster assignment is fixed per SoC. There is no way identify the - * assignment so far, presuming the "first configuration" which is to - * fill the lower cluster group first before moving up to next group. - * PLL1, PLL2, PLL3 are cluster group A, feeding core 0~3 on cluster 1 - * and core 4~7 on cluster 2 - * PLL4, PLL5, PLL6 are cluster group B, feeding core 8~11 on cluster 3 - * and core 12~15 on cluster 4 if existing + * The cluster assignment is fixed per SoC. PLL1, PLL2, PLL3 are + * cluster group A, feeding cores on cluster 1 and cluster 2. + * PLL4, PLL5, PLL6 are cluster group B, feeding cores on cluster 3 + * and cluster 4 if existing. */ for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) { - u32 c_pll_sel = (in_be32(&clk->clkc0csr + (cpu / 4) * 8) >> 27) + int cluster = fsl_qoriq_core_to_cluster(cpu); + u32 c_pll_sel = (in_be32(&clk->clkcsr[cluster].clkcncsr) >> 27) & 0xf; u32 cplx_pll = core_cplx_PLL[c_pll_sel]; if (cplx_pll > 3) printf("Unsupported architecture configuration" " in function %s\n", __func__); - cplx_pll += (cpu / 8) * 3; - + cplx_pll += (cluster / 2) * 3; sysInfo->freqProcessor[cpu] = freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel]; } @@ -240,7 +237,8 @@ void get_sys_info (sys_info_t * sysInfo) #else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) { - u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf; + u32 c_pll_sel = (in_be32(&clk->clkcsr[cpu].clkcncsr) >> 27) + & 0xf; u32 cplx_pll = core_cplx_PLL[c_pll_sel]; sysInfo->freqProcessor[cpu] = |