diff options
Diffstat (limited to 'arch/powerpc/cpu/mpc86xx/speed.c')
-rw-r--r-- | arch/powerpc/cpu/mpc86xx/speed.c | 163 |
1 files changed, 163 insertions, 0 deletions
diff --git a/arch/powerpc/cpu/mpc86xx/speed.c b/arch/powerpc/cpu/mpc86xx/speed.c new file mode 100644 index 0000000000..64a3479d7e --- /dev/null +++ b/arch/powerpc/cpu/mpc86xx/speed.c @@ -0,0 +1,163 @@ +/* + * Copyright 2004 Freescale Semiconductor. + * Jeff Brown + * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) + * + * (C) Copyright 2000-2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc86xx.h> +#include <asm/processor.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* used in some defintiions of CONFIG_SYS_CLK_FREQ */ +extern unsigned long get_board_sys_clk(unsigned long dummy); + +void get_sys_info(sys_info_t *sysInfo) +{ + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + volatile ccsr_gur_t *gur = &immap->im_gur; + uint plat_ratio, e600_ratio; + uint lcrr_div; + + plat_ratio = (gur->porpllsr) & 0x0000003e; + plat_ratio >>= 1; + + switch (plat_ratio) { + case 0x0: + sysInfo->freqSystemBus = 16 * CONFIG_SYS_CLK_FREQ; + break; + case 0x02: + case 0x03: + case 0x04: + case 0x05: + case 0x06: + case 0x08: + case 0x09: + case 0x0a: + case 0x0c: + case 0x10: + sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ; + break; + default: + sysInfo->freqSystemBus = 0; + break; + } + + e600_ratio = (gur->porpllsr) & 0x003f0000; + e600_ratio >>= 16; + + switch (e600_ratio) { + case 0x10: + sysInfo->freqProcessor = 2 * sysInfo->freqSystemBus; + break; + case 0x19: + sysInfo->freqProcessor = 5 * sysInfo->freqSystemBus / 2; + break; + case 0x20: + sysInfo->freqProcessor = 3 * sysInfo->freqSystemBus; + break; + case 0x39: + sysInfo->freqProcessor = 7 * sysInfo->freqSystemBus / 2; + break; + case 0x28: + sysInfo->freqProcessor = 4 * sysInfo->freqSystemBus; + break; + case 0x1d: + sysInfo->freqProcessor = 9 * sysInfo->freqSystemBus / 2; + break; + default: + sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus; + break; + } + +#if defined(CONFIG_SYS_LBC_LCRR) + /* We will program LCRR to this value later */ + lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; +#else + { + volatile ccsr_lbc_t *lbc = &immap->im_lbc; + lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV; + } +#endif + if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { + sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2); + } else { + /* In case anyone cares what the unknown value is */ + sysInfo->freqLocalBus = lcrr_div; + } +} + + +/* + * Measure CPU clock speed (core clock GCLK1, GCLK2) + * (Approx. GCLK frequency in Hz) + */ + +int get_clocks(void) +{ + sys_info_t sys_info; + + get_sys_info(&sys_info); + gd->cpu_clk = sys_info.freqProcessor; + gd->bus_clk = sys_info.freqSystemBus; + gd->lbc_clk = sys_info.freqLocalBus; + + /* + * The base clock for I2C depends on the actual SOC. Unfortunately, + * there is no pattern that can be used to determine the frequency, so + * the only choice is to look up the actual SOC number and use the value + * for that SOC. This information is taken from application note + * AN2919. + */ +#ifdef CONFIG_MPC8610 + gd->i2c1_clk = sys_info.freqSystemBus; +#else + gd->i2c1_clk = sys_info.freqSystemBus / 2; +#endif + gd->i2c2_clk = gd->i2c1_clk; + + if (gd->cpu_clk != 0) + return 0; + else + return 1; +} + + +/* + * get_bus_freq + * Return system bus freq in Hz + */ + +ulong get_bus_freq(ulong dummy) +{ + ulong val; + sys_info_t sys_info; + + get_sys_info(&sys_info); + val = sys_info.freqSystemBus; + + return val; +} |