summaryrefslogtreecommitdiff
path: root/arch/powerpc/cpu/mpc8xx/serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/cpu/mpc8xx/serial.c')
-rw-r--r--arch/powerpc/cpu/mpc8xx/serial.c676
1 files changed, 0 insertions, 676 deletions
diff --git a/arch/powerpc/cpu/mpc8xx/serial.c b/arch/powerpc/cpu/mpc8xx/serial.c
deleted file mode 100644
index b6e12d0d85..0000000000
--- a/arch/powerpc/cpu/mpc8xx/serial.c
+++ /dev/null
@@ -1,676 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <command.h>
-#include <serial.h>
-#include <watchdog.h>
-#include <linux/compiler.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if !defined(CONFIG_8xx_CONS_NONE) /* No Console at all */
-
-#if defined(CONFIG_8xx_CONS_SMC1) /* Console on SMC1 */
-#define SMC_INDEX 0
-#define PROFF_SMC PROFF_SMC1
-#define CPM_CR_CH_SMC CPM_CR_CH_SMC1
-
-#elif defined(CONFIG_8xx_CONS_SMC2) /* Console on SMC2 */
-#define SMC_INDEX 1
-#define PROFF_SMC PROFF_SMC2
-#define CPM_CR_CH_SMC CPM_CR_CH_SMC2
-
-#endif /* CONFIG_8xx_CONS_SMCx */
-
-#if defined(CONFIG_8xx_CONS_SCC1) /* Console on SCC1 */
-#define SCC_INDEX 0
-#define PROFF_SCC PROFF_SCC1
-#define CPM_CR_CH_SCC CPM_CR_CH_SCC1
-
-#elif defined(CONFIG_8xx_CONS_SCC2) /* Console on SCC2 */
-#define SCC_INDEX 1
-#define PROFF_SCC PROFF_SCC2
-#define CPM_CR_CH_SCC CPM_CR_CH_SCC2
-
-#elif defined(CONFIG_8xx_CONS_SCC3) /* Console on SCC3 */
-#define SCC_INDEX 2
-#define PROFF_SCC PROFF_SCC3
-#define CPM_CR_CH_SCC CPM_CR_CH_SCC3
-
-#elif defined(CONFIG_8xx_CONS_SCC4) /* Console on SCC4 */
-#define SCC_INDEX 3
-#define PROFF_SCC PROFF_SCC4
-#define CPM_CR_CH_SCC CPM_CR_CH_SCC4
-
-#endif /* CONFIG_8xx_CONS_SCCx */
-
-#if !defined(CONFIG_SYS_SMC_RXBUFLEN)
-#define CONFIG_SYS_SMC_RXBUFLEN 1
-#define CONFIG_SYS_MAXIDLE 0
-#else
-#if !defined(CONFIG_SYS_MAXIDLE)
-#error "you must define CONFIG_SYS_MAXIDLE"
-#endif
-#endif
-
-typedef volatile struct serialbuffer {
- cbd_t rxbd; /* Rx BD */
- cbd_t txbd; /* Tx BD */
- uint rxindex; /* index for next character to read */
- volatile uchar rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */
- volatile uchar txbuf; /* tx buffers */
-} serialbuffer_t;
-
-static void serial_setdivisor(volatile cpm8xx_t *cp)
-{
- int divisor=(gd->cpu_clk + 8*gd->baudrate)/16/gd->baudrate;
-
- if(divisor/16>0x1000) {
- /* bad divisor, assume 50MHz clock and 9600 baud */
- divisor=(50*1000*1000 + 8*9600)/16/9600;
- }
-
-#ifdef CONFIG_SYS_BRGCLK_PRESCALE
- divisor /= CONFIG_SYS_BRGCLK_PRESCALE;
-#endif
-
- if(divisor<=0x1000) {
- cp->cp_brgc1=((divisor-1)<<1) | CPM_BRG_EN;
- } else {
- cp->cp_brgc1=((divisor/16-1)<<1) | CPM_BRG_EN | CPM_BRG_DIV16;
- }
-}
-
-#if (defined (CONFIG_8xx_CONS_SMC1) || defined (CONFIG_8xx_CONS_SMC2))
-
-/*
- * Minimal serial functions needed to use one of the SMC ports
- * as serial console interface.
- */
-
-static void smc_setbrg (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = &(im->im_cpm);
-
- /* Set up the baud rate generator.
- * See 8xx_io/commproc.c for details.
- *
- * Wire BRG1 to SMCx
- */
-
- cp->cp_simode = 0x00000000;
-
- serial_setdivisor(cp);
-}
-
-static int smc_init (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile smc_t *sp;
- volatile smc_uart_t *up;
- volatile cpm8xx_t *cp = &(im->im_cpm);
-#if (!defined(CONFIG_8xx_CONS_SMC1)) && (defined(CONFIG_MPC823) || defined(CONFIG_MPC850))
- volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport);
-#endif
- uint dpaddr;
- volatile serialbuffer_t *rtx;
-
- /* initialize pointers to SMC */
-
- sp = (smc_t *) &(cp->cp_smc[SMC_INDEX]);
- up = (smc_uart_t *) &cp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- up = (smc_uart_t *) &cp->cp_dpmem[up->smc_rpbase];
-#else
- /* Disable relocation */
- up->smc_rpbase = 0;
-#endif
-
- /* Disable transmitter/receiver. */
- sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-
- /* Enable SDMA. */
- im->im_siu_conf.sc_sdcr = 1;
-
- /* clear error conditions */
-#ifdef CONFIG_SYS_SDSR
- im->im_sdma.sdma_sdsr = CONFIG_SYS_SDSR;
-#else
- im->im_sdma.sdma_sdsr = 0x83;
-#endif
-
- /* clear SDMA interrupt mask */
-#ifdef CONFIG_SYS_SDMR
- im->im_sdma.sdma_sdmr = CONFIG_SYS_SDMR;
-#else
- im->im_sdma.sdma_sdmr = 0x00;
-#endif
-
-#if defined(CONFIG_8xx_CONS_SMC1)
- /* Use Port B for SMC1 instead of other functions. */
- cp->cp_pbpar |= 0x000000c0;
- cp->cp_pbdir &= ~0x000000c0;
- cp->cp_pbodr &= ~0x000000c0;
-#else /* CONFIG_8xx_CONS_SMC2 */
-# if defined(CONFIG_MPC823) || defined(CONFIG_MPC850)
- /* Use Port A for SMC2 instead of other functions. */
- ip->iop_papar |= 0x00c0;
- ip->iop_padir &= ~0x00c0;
- ip->iop_paodr &= ~0x00c0;
-# else /* must be a 860 then */
- /* Use Port B for SMC2 instead of other functions.
- */
- cp->cp_pbpar |= 0x00000c00;
- cp->cp_pbdir &= ~0x00000c00;
- cp->cp_pbodr &= ~0x00000c00;
-# endif
-#endif
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
- dpaddr = CPM_SERIAL_BASE;
-
- rtx = (serialbuffer_t *)&cp->cp_dpmem[dpaddr];
- /* Allocate space for two buffer descriptors in the DP ram.
- * For now, this address seems OK, but it may have to
- * change with newer versions of the firmware.
- * damm: allocating space after the two buffers for rx/tx data
- */
-
- rtx->rxbd.cbd_bufaddr = (uint) &rtx->rxbuf;
- rtx->rxbd.cbd_sc = 0;
-
- rtx->txbd.cbd_bufaddr = (uint) &rtx->txbuf;
- rtx->txbd.cbd_sc = 0;
-
- /* Set up the uart parameters in the parameter ram. */
- up->smc_rbase = dpaddr;
- up->smc_tbase = dpaddr+sizeof(cbd_t);
- up->smc_rfcr = SMC_EB;
- up->smc_tfcr = SMC_EB;
-#if defined (CONFIG_SYS_SMC_UCODE_PATCH)
- up->smc_rbptr = up->smc_rbase;
- up->smc_tbptr = up->smc_tbase;
- up->smc_rstate = 0;
- up->smc_tstate = 0;
-#endif
-
- /* Set UART mode, 8 bit, no parity, one stop.
- * Enable receive and transmit.
- */
- sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
-
- /* Mask all interrupts and remove anything pending.
- */
- sp->smc_smcm = 0;
- sp->smc_smce = 0xff;
-
-#ifdef CONFIG_SYS_SPC1920_SMC1_CLK4
- /* clock source is PLD */
-
- /* set freq to 19200 Baud */
- *((volatile uchar *) CONFIG_SYS_SPC1920_PLD_BASE+6) = 0x3;
- /* configure clk4 as input */
- im->im_ioport.iop_pdpar |= 0x800;
- im->im_ioport.iop_pddir &= ~0x800;
-
- cp->cp_simode = ((cp->cp_simode & ~0xf000) | 0x7000);
-#else
- /* Set up the baud rate generator */
- smc_setbrg ();
-#endif
-
- /* Make the first buffer the only buffer. */
- rtx->txbd.cbd_sc |= BD_SC_WRAP;
- rtx->rxbd.cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
- /* single/multi character receive. */
- up->smc_mrblr = CONFIG_SYS_SMC_RXBUFLEN;
- up->smc_maxidl = CONFIG_SYS_MAXIDLE;
- rtx->rxindex = 0;
-
- /* Initialize Tx/Rx parameters. */
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- /* Enable transmitter/receiver. */
- sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-
- return (0);
-}
-
-static void
-smc_putc(const char c)
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
- volatile serialbuffer_t *rtx;
-
- if (c == '\n')
- smc_putc ('\r');
-
- up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
-#endif
-
- rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
- /* Wait for last character to go. */
- rtx->txbuf = c;
- rtx->txbd.cbd_datlen = 1;
- rtx->txbd.cbd_sc |= BD_SC_READY;
- __asm__("eieio");
-
- while (rtx->txbd.cbd_sc & BD_SC_READY) {
- WATCHDOG_RESET ();
- __asm__("eieio");
- }
-}
-
-static void
-smc_puts (const char *s)
-{
- while (*s) {
- smc_putc (*s++);
- }
-}
-
-static int
-smc_getc(void)
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
- volatile serialbuffer_t *rtx;
- unsigned char c;
-
- up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
-#endif
- rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
- /* Wait for character to show up. */
- while (rtx->rxbd.cbd_sc & BD_SC_EMPTY)
- WATCHDOG_RESET ();
-
- /* the characters are read one by one,
- * use the rxindex to know the next char to deliver
- */
- c = *(unsigned char *) (rtx->rxbd.cbd_bufaddr+rtx->rxindex);
- rtx->rxindex++;
-
- /* check if all char are readout, then make prepare for next receive */
- if (rtx->rxindex >= rtx->rxbd.cbd_datlen) {
- rtx->rxindex = 0;
- rtx->rxbd.cbd_sc |= BD_SC_EMPTY;
- }
- return(c);
-}
-
-static int
-smc_tstc(void)
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
- volatile serialbuffer_t *rtx;
-
- up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
-#endif
-
- rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
- return !(rtx->rxbd.cbd_sc & BD_SC_EMPTY);
-}
-
-struct serial_device serial_smc_device =
-{
- .name = "serial_smc",
- .start = smc_init,
- .stop = NULL,
- .setbrg = smc_setbrg,
- .getc = smc_getc,
- .tstc = smc_tstc,
- .putc = smc_putc,
- .puts = smc_puts,
-};
-
-#endif /* CONFIG_8xx_CONS_SMC1 || CONFIG_8xx_CONS_SMC2 */
-
-#if defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) || \
- defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
-
-static void
-scc_setbrg (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = &(im->im_cpm);
-
- /* Set up the baud rate generator.
- * See 8xx_io/commproc.c for details.
- *
- * Wire BRG1 to SCCx
- */
-
- cp->cp_sicr &= ~(0x000000FF << (8 * SCC_INDEX));
-
- serial_setdivisor(cp);
-}
-
-static int scc_init (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile scc_t *sp;
- volatile scc_uart_t *up;
- volatile cbd_t *tbdf, *rbdf;
- volatile cpm8xx_t *cp = &(im->im_cpm);
- uint dpaddr;
-#if (SCC_INDEX != 2) || !defined(CONFIG_MPC850)
- volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport);
-#endif
-
- /* initialize pointers to SCC */
-
- sp = (scc_t *) &(cp->cp_scc[SCC_INDEX]);
- up = (scc_uart_t *) &cp->cp_dparam[PROFF_SCC];
-
- /* Disable transmitter/receiver. */
- sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-#if (SCC_INDEX == 2) && defined(CONFIG_MPC850)
- /*
- * The MPC850 has SCC3 on Port B
- */
- cp->cp_pbpar |= 0x06;
- cp->cp_pbdir &= ~0x06;
- cp->cp_pbodr &= ~0x06;
-
-#elif (SCC_INDEX < 2)
- /*
- * Standard configuration for SCC's is on Part A
- */
- ip->iop_papar |= ((3 << (2 * SCC_INDEX)));
- ip->iop_padir &= ~((3 << (2 * SCC_INDEX)));
- ip->iop_paodr &= ~((3 << (2 * SCC_INDEX)));
-#endif
-
- /* Allocate space for two buffer descriptors in the DP ram. */
- dpaddr = dpram_alloc_align(sizeof(cbd_t)*2 + 2, 8);
-
- /* Enable SDMA. */
- im->im_siu_conf.sc_sdcr = 0x0001;
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
-
- rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
- rbdf->cbd_bufaddr = (uint) (rbdf+2);
- rbdf->cbd_sc = 0;
- tbdf = rbdf + 1;
- tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
- tbdf->cbd_sc = 0;
-
- /* Set up the baud rate generator. */
- scc_setbrg ();
-
- /* Set up the uart parameters in the parameter ram. */
- up->scc_genscc.scc_rbase = dpaddr;
- up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
-
- /* Initialize Tx/Rx parameters. */
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SCC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- up->scc_genscc.scc_rfcr = SCC_EB | 0x05;
- up->scc_genscc.scc_tfcr = SCC_EB | 0x05;
-
- up->scc_genscc.scc_mrblr = 1; /* Single character receive */
- up->scc_maxidl = 0; /* disable max idle */
- up->scc_brkcr = 1; /* send one break character on stop TX */
- up->scc_parec = 0;
- up->scc_frmec = 0;
- up->scc_nosec = 0;
- up->scc_brkec = 0;
- up->scc_uaddr1 = 0;
- up->scc_uaddr2 = 0;
- up->scc_toseq = 0;
- up->scc_char1 = 0x8000;
- up->scc_char2 = 0x8000;
- up->scc_char3 = 0x8000;
- up->scc_char4 = 0x8000;
- up->scc_char5 = 0x8000;
- up->scc_char6 = 0x8000;
- up->scc_char7 = 0x8000;
- up->scc_char8 = 0x8000;
- up->scc_rccm = 0xc0ff;
-
- /* Set low latency / small fifo. */
- sp->scc_gsmrh = SCC_GSMRH_RFW;
-
- /* Set SCC(x) clock mode to 16x
- * See 8xx_io/commproc.c for details.
- *
- * Wire BRG1 to SCCn
- */
-
- /* Set UART mode, clock divider 16 on Tx and Rx */
- sp->scc_gsmrl &= ~0xF;
- sp->scc_gsmrl |=
- (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
-
- sp->scc_psmr = 0;
- sp->scc_psmr |= SCU_PSMR_CL;
-
- /* Mask all interrupts and remove anything pending. */
- sp->scc_sccm = 0;
- sp->scc_scce = 0xffff;
- sp->scc_dsr = 0x7e7e;
- sp->scc_psmr = 0x3000;
-
- /* Make the first buffer the only buffer. */
- tbdf->cbd_sc |= BD_SC_WRAP;
- rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
- /* Enable transmitter/receiver. */
- sp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
- return (0);
-}
-
-static void
-scc_putc(const char c)
-{
- volatile cbd_t *tbdf;
- volatile char *buf;
- volatile scc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
-
- if (c == '\n')
- scc_putc ('\r');
-
- up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
-
- tbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_tbase];
-
- /* Wait for last character to go. */
-
- buf = (char *)tbdf->cbd_bufaddr;
-
- *buf = c;
- tbdf->cbd_datlen = 1;
- tbdf->cbd_sc |= BD_SC_READY;
- __asm__("eieio");
-
- while (tbdf->cbd_sc & BD_SC_READY) {
- __asm__("eieio");
- WATCHDOG_RESET ();
- }
-}
-
-static void
-scc_puts (const char *s)
-{
- while (*s) {
- scc_putc (*s++);
- }
-}
-
-static int
-scc_getc(void)
-{
- volatile cbd_t *rbdf;
- volatile unsigned char *buf;
- volatile scc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
- unsigned char c;
-
- up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
-
- rbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_rbase];
-
- /* Wait for character to show up. */
- buf = (unsigned char *)rbdf->cbd_bufaddr;
-
- while (rbdf->cbd_sc & BD_SC_EMPTY)
- WATCHDOG_RESET ();
-
- c = *buf;
- rbdf->cbd_sc |= BD_SC_EMPTY;
-
- return(c);
-}
-
-static int
-scc_tstc(void)
-{
- volatile cbd_t *rbdf;
- volatile scc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
-
- up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
-
- rbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_rbase];
-
- return(!(rbdf->cbd_sc & BD_SC_EMPTY));
-}
-
-struct serial_device serial_scc_device =
-{
- .name = "serial_scc",
- .start = scc_init,
- .stop = NULL,
- .setbrg = scc_setbrg,
- .getc = scc_getc,
- .tstc = scc_tstc,
- .putc = scc_putc,
- .puts = scc_puts,
-};
-
-#endif /* CONFIG_8xx_CONS_SCCx */
-
-__weak struct serial_device *default_serial_console(void)
-{
-#if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2)
- return &serial_smc_device;
-#else
- return &serial_scc_device;
-#endif
-}
-
-void mpc8xx_serial_initialize(void)
-{
-#if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2)
- serial_register(&serial_smc_device);
-#endif
-#if defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) || \
- defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
- serial_register(&serial_scc_device);
-#endif
-}
-
-#if defined(CONFIG_CMD_KGDB)
-
-void
-kgdb_serial_init(void)
-{
- int i = -1;
-
- if (strcmp(default_serial_console()->name, "serial_smc") == 0)
- {
-#if defined(CONFIG_8xx_CONS_SMC1)
- i = 1;
-#elif defined(CONFIG_8xx_CONS_SMC2)
- i = 2;
-#endif
- }
- else if (strcmp(default_serial_console()->name, "serial_scc") == 0)
- {
-#if defined(CONFIG_8xx_CONS_SCC1)
- i = 1;
-#elif defined(CONFIG_8xx_CONS_SCC2)
- i = 2;
-#elif defined(CONFIG_8xx_CONS_SCC3)
- i = 3;
-#elif defined(CONFIG_8xx_CONS_SCC4)
- i = 4;
-#endif
- }
-
- if (i >= 0)
- {
- serial_printf("[on %s%d] ", default_serial_console()->name, i);
- }
-}
-
-void
-putDebugChar (int c)
-{
- serial_putc (c);
-}
-
-void
-putDebugStr (const char *str)
-{
- serial_puts (str);
-}
-
-int
-getDebugChar (void)
-{
- return serial_getc();
-}
-
-void
-kgdb_interruptible (int yes)
-{
- return;
-}
-#endif
-
-#endif /* CONFIG_8xx_CONS_NONE */
generated by cgit (git 2.34.1) at 2024-12-24 12:30:20 +0000