diff options
Diffstat (limited to 'arch/powerpc/cpu/mpc8xxx/ddr/ddr1_dimm_params.c')
| -rw-r--r-- | arch/powerpc/cpu/mpc8xxx/ddr/ddr1_dimm_params.c | 343 |
1 files changed, 0 insertions, 343 deletions
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr1_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr1_dimm_params.c deleted file mode 100644 index f137fcee34..0000000000 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr1_dimm_params.c +++ /dev/null @@ -1,343 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. - */ - -#include <common.h> -#include <asm/fsl_ddr_sdram.h> - -#include "ddr.h" - -/* - * Calculate the Density of each Physical Rank. - * Returned size is in bytes. - * - * Study these table from Byte 31 of JEDEC SPD Spec. - * - * DDR I DDR II - * Bit Size Size - * --- ----- ------ - * 7 high 512MB 512MB - * 6 256MB 256MB - * 5 128MB 128MB - * 4 64MB 16GB - * 3 32MB 8GB - * 2 16MB 4GB - * 1 2GB 2GB - * 0 low 1GB 1GB - * - * Reorder Table to be linear by stripping the bottom - * 2 or 5 bits off and shifting them up to the top. - */ - -static unsigned long long -compute_ranksize(unsigned int mem_type, unsigned char row_dens) -{ - unsigned long long bsize; - - /* Bottom 2 bits up to the top. */ - bsize = ((row_dens >> 2) | ((row_dens & 3) << 6)); - bsize <<= 24ULL; - debug("DDR: DDR I rank density = 0x%16llx\n", bsize); - - return bsize; -} - -/* - * Convert a two-nibble BCD value into a cycle time. - * While the spec calls for nano-seconds, picos are returned. - * - * This implements the tables for bytes 9, 23 and 25 for both - * DDR I and II. No allowance for distinguishing the invalid - * fields absent for DDR I yet present in DDR II is made. - * (That is, cycle times of .25, .33, .66 and .75 ns are - * allowed for both DDR II and I.) - */ -static unsigned int -convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val) -{ - /* Table look up the lower nibble, allow DDR I & II. */ - unsigned int tenths_ps[16] = { - 0, - 100, - 200, - 300, - 400, - 500, - 600, - 700, - 800, - 900, - 250, /* This and the next 3 entries valid ... */ - 330, /* ... only for tCK calculations. */ - 660, - 750, - 0, /* undefined */ - 0 /* undefined */ - }; - - unsigned int whole_ns = (spd_val & 0xF0) >> 4; - unsigned int tenth_ns = spd_val & 0x0F; - unsigned int ps = whole_ns * 1000 + tenths_ps[tenth_ns]; - - return ps; -} - -static unsigned int -convert_bcd_hundredths_to_cycle_time_ps(unsigned int spd_val) -{ - unsigned int tenth_ns = (spd_val & 0xF0) >> 4; - unsigned int hundredth_ns = spd_val & 0x0F; - unsigned int ps = tenth_ns * 100 + hundredth_ns * 10; - - return ps; -} - -static unsigned int byte40_table_ps[8] = { - 0, - 250, - 330, - 500, - 660, - 750, - 0, /* supposed to be RFC, but not sure what that means */ - 0 /* Undefined */ -}; - -static unsigned int -compute_trfc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trfc) -{ - unsigned int trfc_ps; - - trfc_ps = (((trctrfc_ext & 0x1) * 256) + trfc) * 1000 - + byte40_table_ps[(trctrfc_ext >> 1) & 0x7]; - - return trfc_ps; -} - -static unsigned int -compute_trc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trc) -{ - unsigned int trc_ps; - - trc_ps = trc * 1000 + byte40_table_ps[(trctrfc_ext >> 4) & 0x7]; - - return trc_ps; -} - -/* - * tCKmax from DDR I SPD Byte 43 - * - * Bits 7:2 == whole ns - * Bits 1:0 == quarter ns - * 00 == 0.00 ns - * 01 == 0.25 ns - * 10 == 0.50 ns - * 11 == 0.75 ns - * - * Returns picoseconds. - */ -static unsigned int -compute_tckmax_from_spd_ps(unsigned int byte43) -{ - return (byte43 >> 2) * 1000 + (byte43 & 0x3) * 250; -} - -/* - * Determine Refresh Rate. Ignore self refresh bit on DDR I. - * Table from SPD Spec, Byte 12, converted to picoseconds and - * filled in with "default" normal values. - */ -static unsigned int -determine_refresh_rate_ps(const unsigned int spd_refresh) -{ - unsigned int refresh_time_ps[8] = { - 15625000, /* 0 Normal 1.00x */ - 3900000, /* 1 Reduced .25x */ - 7800000, /* 2 Extended .50x */ - 31300000, /* 3 Extended 2.00x */ - 62500000, /* 4 Extended 4.00x */ - 125000000, /* 5 Extended 8.00x */ - 15625000, /* 6 Normal 1.00x filler */ - 15625000, /* 7 Normal 1.00x filler */ - }; - - return refresh_time_ps[spd_refresh & 0x7]; -} - -/* - * The purpose of this function is to compute a suitable - * CAS latency given the DRAM clock period. The SPD only - * defines at most 3 CAS latencies. Typically the slower in - * frequency the DIMM runs at, the shorter its CAS latency can be. - * If the DIMM is operating at a sufficiently low frequency, - * it may be able to run at a CAS latency shorter than the - * shortest SPD-defined CAS latency. - * - * If a CAS latency is not found, 0 is returned. - * - * Do this by finding in the standard speed bin table the longest - * tCKmin that doesn't exceed the value of mclk_ps (tCK). - * - * An assumption made is that the SDRAM device allows the - * CL to be programmed for a value that is lower than those - * advertised by the SPD. This is not always the case, - * as those modes not defined in the SPD are optional. - * - * CAS latency de-rating based upon values JEDEC Standard No. 79-E - * Table 11. - * - * ordinal 2, ddr1_speed_bins[1] contains tCK for CL=2 - */ - /* CL2.0 CL2.5 CL3.0 */ -unsigned short ddr1_speed_bins[] = {0, 7500, 6000, 5000 }; - -unsigned int -compute_derated_DDR1_CAS_latency(unsigned int mclk_ps) -{ - const unsigned int num_speed_bins = ARRAY_SIZE(ddr1_speed_bins); - unsigned int lowest_tCKmin_found = 0; - unsigned int lowest_tCKmin_CL = 0; - unsigned int i; - - debug("mclk_ps = %u\n", mclk_ps); - - for (i = 0; i < num_speed_bins; i++) { - unsigned int x = ddr1_speed_bins[i]; - debug("i=%u, x = %u, lowest_tCKmin_found = %u\n", - i, x, lowest_tCKmin_found); - if (x && lowest_tCKmin_found <= x && x <= mclk_ps) { - lowest_tCKmin_found = x; - lowest_tCKmin_CL = i + 1; - } - } - - debug("lowest_tCKmin_CL = %u\n", lowest_tCKmin_CL); - - return lowest_tCKmin_CL; -} - -/* - * ddr_compute_dimm_parameters for DDR1 SPD - * - * Compute DIMM parameters based upon the SPD information in spd. - * Writes the results to the dimm_params_t structure pointed by pdimm. - * - * FIXME: use #define for the retvals - */ -unsigned int -ddr_compute_dimm_parameters(const ddr1_spd_eeprom_t *spd, - dimm_params_t *pdimm, - unsigned int dimm_number) -{ - unsigned int retval; - - if (spd->mem_type) { - if (spd->mem_type != SPD_MEMTYPE_DDR) { - printf("DIMM %u: is not a DDR1 SPD.\n", dimm_number); - return 1; - } - } else { - memset(pdimm, 0, sizeof(dimm_params_t)); - return 1; - } - - retval = ddr1_spd_check(spd); - if (retval) { - printf("DIMM %u: failed checksum\n", dimm_number); - return 2; - } - - /* - * The part name in ASCII in the SPD EEPROM is not null terminated. - * Guarantee null termination here by presetting all bytes to 0 - * and copying the part name in ASCII from the SPD onto it - */ - memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); - memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1); - - /* DIMM organization parameters */ - pdimm->n_ranks = spd->nrows; - pdimm->rank_density = compute_ranksize(spd->mem_type, spd->bank_dens); - pdimm->capacity = pdimm->n_ranks * pdimm->rank_density; - pdimm->data_width = spd->dataw_lsb; - pdimm->primary_sdram_width = spd->primw; - pdimm->ec_sdram_width = spd->ecw; - - /* - * FIXME: Need to determine registered_dimm status. - * 1 == register buffered - * 0 == unbuffered - */ - pdimm->registered_dimm = 0; /* unbuffered */ - - /* SDRAM device parameters */ - pdimm->n_row_addr = spd->nrow_addr; - pdimm->n_col_addr = spd->ncol_addr; - pdimm->n_banks_per_sdram_device = spd->nbanks; - pdimm->edc_config = spd->config; - pdimm->burst_lengths_bitmask = spd->burstl; - pdimm->row_density = spd->bank_dens; - - /* - * Calculate the Maximum Data Rate based on the Minimum Cycle time. - * The SPD clk_cycle field (tCKmin) is measured in tenths of - * nanoseconds and represented as BCD. - */ - pdimm->tckmin_x_ps - = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle); - pdimm->tckmin_x_minus_1_ps - = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle2); - pdimm->tckmin_x_minus_2_ps - = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle3); - - pdimm->tckmax_ps = compute_tckmax_from_spd_ps(spd->tckmax); - - /* - * Compute CAS latencies defined by SPD - * The SPD caslat_x should have at least 1 and at most 3 bits set. - * - * If cas_lat after masking is 0, the __ilog2 function returns - * 255 into the variable. This behavior is abused once. - */ - pdimm->caslat_x = __ilog2(spd->cas_lat); - pdimm->caslat_x_minus_1 = __ilog2(spd->cas_lat - & ~(1 << pdimm->caslat_x)); - pdimm->caslat_x_minus_2 = __ilog2(spd->cas_lat - & ~(1 << pdimm->caslat_x) - & ~(1 << pdimm->caslat_x_minus_1)); - - /* Compute CAS latencies below that defined by SPD */ - pdimm->caslat_lowest_derated - = compute_derated_DDR1_CAS_latency(get_memory_clk_period_ps()); - - /* Compute timing parameters */ - pdimm->trcd_ps = spd->trcd * 250; - pdimm->trp_ps = spd->trp * 250; - pdimm->tras_ps = spd->tras * 1000; - - pdimm->twr_ps = mclk_to_picos(3); - pdimm->twtr_ps = mclk_to_picos(1); - pdimm->trfc_ps = compute_trfc_ps_from_spd(0, spd->trfc); - - pdimm->trrd_ps = spd->trrd * 250; - pdimm->trc_ps = compute_trc_ps_from_spd(0, spd->trc); - - pdimm->refresh_rate_ps = determine_refresh_rate_ps(spd->refresh); - - pdimm->tis_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_setup); - pdimm->tih_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_hold); - pdimm->tds_ps - = convert_bcd_hundredths_to_cycle_time_ps(spd->data_setup); - pdimm->tdh_ps - = convert_bcd_hundredths_to_cycle_time_ps(spd->data_hold); - - pdimm->trtp_ps = mclk_to_picos(2); /* By the book. */ - pdimm->tdqsq_max_ps = spd->tdqsq * 10; - pdimm->tqhs_ps = spd->tqhs * 10; - - return 0; -} |