diff options
Diffstat (limited to 'arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c')
| -rw-r--r-- | arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c | 3155 |
1 files changed, 0 insertions, 3155 deletions
diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c deleted file mode 100644 index ffc62a5849..0000000000 --- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c +++ /dev/null @@ -1,3155 +0,0 @@ -/* - * arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c - * This SPD SDRAM detection code supports AMCC PPC44x cpu's with a - * DDR2 controller (non Denali Core). Those currently are: - * - * 405: 405EX(r) - * 440/460: 440SP/440SPe/460EX/460GT - * - * Copyright (c) 2008 Nuovation System Designs, LLC - * Grant Erickson <gerickson@nuovations.com> - - * (C) Copyright 2007-2009 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * COPYRIGHT AMCC CORPORATION 2004 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* define DEBUG for debugging output (obviously ;-)) */ -#if 0 -#define DEBUG -#endif - -#include <common.h> -#include <command.h> -#include <asm/ppc4xx.h> -#include <i2c.h> -#include <asm/io.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <asm/cache.h> - -#include "ecc.h" - -DECLARE_GLOBAL_DATA_PTR; - -#define PPC4xx_IBM_DDR2_DUMP_REGISTER(mnemonic) \ - do { \ - u32 data; \ - mfsdram(SDRAM_##mnemonic, data); \ - printf("%20s[%02x] = 0x%08X\n", \ - "SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \ - } while (0) - -#define PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(mnemonic) \ - do { \ - u32 data; \ - data = mfdcr(SDRAM_##mnemonic); \ - printf("%20s[%02x] = 0x%08X\n", \ - "SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \ - } while (0) - -static void update_rdcc(void) -{ - u32 val; - - /* - * Complete RDSS configuration as mentioned on page 7 of the AMCC - * PowerPC440SP/SPe DDR2 application note: - * "DDR1/DDR2 Initialization Sequence and Dynamic Tuning" - * - * Or item #10 "10. Complete RDSS configuration" in chapter - * "22.2.9 SDRAM Initialization" of AMCC PPC460EX/EXr/GT users - * manual. - */ - mfsdram(SDRAM_RTSR, val); - if ((val & SDRAM_RTSR_TRK1SM_MASK) == SDRAM_RTSR_TRK1SM_ATPLS1) { - mfsdram(SDRAM_RDCC, val); - if ((val & SDRAM_RDCC_RDSS_MASK) != SDRAM_RDCC_RDSS_T4) { - val += 0x40000000; - mtsdram(SDRAM_RDCC, val); - } - } -} - -#if defined(CONFIG_440) -/* - * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 - * memory region. Right now the cache should still be disabled in U-Boot - * because of the EMAC driver, that need its buffer descriptor to be located - * in non cached memory. - * - * If at some time this restriction doesn't apply anymore, just define - * CONFIG_4xx_DCACHE in the board config file and this code should setup - * everything correctly. - */ -#ifdef CONFIG_4xx_DCACHE -/* enable caching on SDRAM */ -#define MY_TLB_WORD2_I_ENABLE 0 -#else -/* disable caching on SDRAM */ -#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE -#endif /* CONFIG_4xx_DCACHE */ - -void dcbz_area(u32 start_address, u32 num_bytes); -#endif /* CONFIG_440 */ - -#define MAXRANKS 4 -#define MAXBXCF 4 - -#define MULDIV64(m1, m2, d) (u32)(((u64)(m1) * (u64)(m2)) / (u64)(d)) - -/*-----------------------------------------------------------------------------+ - * sdram_memsize - *-----------------------------------------------------------------------------*/ -phys_size_t sdram_memsize(void) -{ - phys_size_t mem_size; - unsigned long mcopt2; - unsigned long mcstat; - unsigned long mb0cf; - unsigned long sdsz; - unsigned long i; - - mem_size = 0; - - mfsdram(SDRAM_MCOPT2, mcopt2); - mfsdram(SDRAM_MCSTAT, mcstat); - - /* DDR controller must be enabled and not in self-refresh. */ - /* Otherwise memsize is zero. */ - if (((mcopt2 & SDRAM_MCOPT2_DCEN_MASK) == SDRAM_MCOPT2_DCEN_ENABLE) - && ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT) - && ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK)) - == (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) { - for (i = 0; i < MAXBXCF; i++) { - mfsdram(SDRAM_MB0CF + (i << 2), mb0cf); - /* Banks enabled */ - if ((mb0cf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) { -#if defined(CONFIG_440) - sdsz = mfdcr_any(SDRAM_R0BAS + i) & SDRAM_RXBAS_SDSZ_MASK; -#else - sdsz = mb0cf & SDRAM_RXBAS_SDSZ_MASK; -#endif - switch(sdsz) { - case SDRAM_RXBAS_SDSZ_8: - mem_size+=8; - break; - case SDRAM_RXBAS_SDSZ_16: - mem_size+=16; - break; - case SDRAM_RXBAS_SDSZ_32: - mem_size+=32; - break; - case SDRAM_RXBAS_SDSZ_64: - mem_size+=64; - break; - case SDRAM_RXBAS_SDSZ_128: - mem_size+=128; - break; - case SDRAM_RXBAS_SDSZ_256: - mem_size+=256; - break; - case SDRAM_RXBAS_SDSZ_512: - mem_size+=512; - break; - case SDRAM_RXBAS_SDSZ_1024: - mem_size+=1024; - break; - case SDRAM_RXBAS_SDSZ_2048: - mem_size+=2048; - break; - case SDRAM_RXBAS_SDSZ_4096: - mem_size+=4096; - break; - default: - printf("WARNING: Unsupported bank size (SDSZ=0x%lx)!\n" - , sdsz); - mem_size=0; - break; - } - } - } - } - - return mem_size << 20; -} - -/*-----------------------------------------------------------------------------+ - * is_ecc_enabled - *-----------------------------------------------------------------------------*/ -static unsigned long is_ecc_enabled(void) -{ - unsigned long val; - - mfsdram(SDRAM_MCOPT1, val); - - return SDRAM_MCOPT1_MCHK_CHK_DECODE(val); -} - -/*-----------------------------------------------------------------------------+ - * board_add_ram_info - *-----------------------------------------------------------------------------*/ -void board_add_ram_info(int use_default) -{ - PPC4xx_SYS_INFO board_cfg; - u32 val; - - if (is_ecc_enabled()) - puts(" (ECC"); - else - puts(" (ECC not"); - - get_sys_info(&board_cfg); - -#if defined(CONFIG_405EX) - val = board_cfg.freqPLB; -#else - mfsdr(SDR0_DDR0, val); - val = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(val), 1); -#endif - printf(" enabled, %d MHz", (val * 2) / 1000000); - - mfsdram(SDRAM_MMODE, val); - val = (val & SDRAM_MMODE_DCL_MASK) >> 4; - printf(", CL%d)", val); -} - -#if defined(CONFIG_SPD_EEPROM) - -/*-----------------------------------------------------------------------------+ - * Defines - *-----------------------------------------------------------------------------*/ -#define SDRAM_DDR1 1 -#define SDRAM_DDR2 2 -#define SDRAM_NONE 0 - -#define MAXDIMMS 2 -#define MAX_SPD_BYTES 256 /* Max number of bytes on the DIMM's SPD EEPROM */ - -#define ONE_BILLION 1000000000 - -#define CMD_NOP (7 << 19) -#define CMD_PRECHARGE (2 << 19) -#define CMD_REFRESH (1 << 19) -#define CMD_EMR (0 << 19) -#define CMD_READ (5 << 19) -#define CMD_WRITE (4 << 19) - -#define SELECT_MR (0 << 16) -#define SELECT_EMR (1 << 16) -#define SELECT_EMR2 (2 << 16) -#define SELECT_EMR3 (3 << 16) - -/* MR */ -#define DLL_RESET 0x00000100 - -#define WRITE_RECOV_2 (1 << 9) -#define WRITE_RECOV_3 (2 << 9) -#define WRITE_RECOV_4 (3 << 9) -#define WRITE_RECOV_5 (4 << 9) -#define WRITE_RECOV_6 (5 << 9) - -#define BURST_LEN_4 0x00000002 - -/* EMR */ -#define ODT_0_OHM 0x00000000 -#define ODT_50_OHM 0x00000044 -#define ODT_75_OHM 0x00000004 -#define ODT_150_OHM 0x00000040 - -#define ODS_FULL 0x00000000 -#define ODS_REDUCED 0x00000002 -#define OCD_CALIB_DEF 0x00000380 - -/* defines for ODT (On Die Termination) of the 440SP(e) DDR2 controller */ -#define ODT_EB0R (0x80000000 >> 8) -#define ODT_EB0W (0x80000000 >> 7) -#define CALC_ODT_R(n) (ODT_EB0R << (n << 1)) -#define CALC_ODT_W(n) (ODT_EB0W << (n << 1)) -#define CALC_ODT_RW(n) (CALC_ODT_R(n) | CALC_ODT_W(n)) - -/* Defines for the Read Cycle Delay test */ -#define NUMMEMTESTS 8 -#define NUMMEMWORDS 8 -#define NUMLOOPS 64 /* memory test loops */ - -/* - * Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM. - * To support such configurations, we "only" map the first 2GB via the TLB's. We - * need some free virtual address space for the remaining peripherals like, SoC - * devices, FLASH etc. - * - * Note that ECC is currently not supported on configurations with more than 2GB - * SDRAM. This is because we only map the first 2GB on such systems, and therefore - * the ECC parity byte of the remaining area can't be written. - */ - -/* - * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed - */ -void __spd_ddr_init_hang (void) -{ - hang (); -} -void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang"))); - -/* - * To provide an interface for board specific config values in this common - * DDR setup code, we implement he "weak" default functions here. They return - * the default value back to the caller. - * - * Please see include/configs/yucca.h for an example fora board specific - * implementation. - */ -u32 __ddr_wrdtr(u32 default_val) -{ - return default_val; -} -u32 ddr_wrdtr(u32) __attribute__((weak, alias("__ddr_wrdtr"))); - -u32 __ddr_clktr(u32 default_val) -{ - return default_val; -} -u32 ddr_clktr(u32) __attribute__((weak, alias("__ddr_clktr"))); - - -/* Private Structure Definitions */ - -/* enum only to ease code for cas latency setting */ -typedef enum ddr_cas_id { - DDR_CAS_2 = 20, - DDR_CAS_2_5 = 25, - DDR_CAS_3 = 30, - DDR_CAS_4 = 40, - DDR_CAS_5 = 50 -} ddr_cas_id_t; - -/*-----------------------------------------------------------------------------+ - * Prototypes - *-----------------------------------------------------------------------------*/ -static void get_spd_info(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks); -static void check_mem_type(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks); -static void check_frequency(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks); -static void check_rank_number(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks); -static void check_voltage_type(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks); -static void program_memory_queue(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks); -static void program_codt(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks); -static void program_mode(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks, - ddr_cas_id_t *selected_cas, - int *write_recovery); -static void program_tr(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks); -static void program_rtr(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks); -static void program_bxcf(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks); -static void program_copt1(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks); -static void program_initplr(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks, - ddr_cas_id_t selected_cas, - int write_recovery); -#ifdef CONFIG_DDR_ECC -static void program_ecc(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks, - unsigned long tlb_word2_i_value); -#endif -#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) -static void program_DQS_calibration(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks); -#ifdef HARD_CODED_DQS /* calibration test with hardvalues */ -static void test(void); -#else -static void DQS_calibration_process(void); -#endif -#endif - -static unsigned char spd_read(uchar chip, uint addr) -{ - unsigned char data[2]; - - if (i2c_probe(chip) == 0) - if (i2c_read(chip, addr, 1, data, 1) == 0) - return data[0]; - - return 0; -} - -/*-----------------------------------------------------------------------------+ - * dram_init. Initializes the 440SP Memory Queue and DDR SDRAM controller. - * Note: This routine runs from flash with a stack set up in the chip's - * sram space. It is important that the routine does not require .sbss, .bss or - * .data sections. It also cannot call routines that require these sections. - *-----------------------------------------------------------------------------*/ -/*----------------------------------------------------------------------------- - * Function: dram_init - * Description: Configures SDRAM memory banks for DDR operation. - * Auto Memory Configuration option reads the DDR SDRAM EEPROMs - * via the IIC bus and then configures the DDR SDRAM memory - * banks appropriately. If Auto Memory Configuration is - * not used, it is assumed that no DIMM is plugged - *-----------------------------------------------------------------------------*/ -int dram_init(void) -{ - unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS; - unsigned long dimm_populated[MAXDIMMS] = {SDRAM_NONE, SDRAM_NONE}; - unsigned long num_dimm_banks; /* on board dimm banks */ - unsigned long val; - ddr_cas_id_t selected_cas = DDR_CAS_5; /* preset to silence compiler */ - int write_recovery; - phys_size_t dram_size = 0; - - if (IS_ENABLED(CONFIG_SYS_RAMBOOT)) { - /* - * Reduce RAM size to avoid overwriting memory used by - * current stack? Not sure what is happening. - */ - gd->ram_size = sdram_memsize() / 2; - - return 0; - } - - num_dimm_banks = sizeof(iic0_dimm_addr); - - /*------------------------------------------------------------------ - * Reset the DDR-SDRAM controller. - *-----------------------------------------------------------------*/ - mtsdr(SDR0_SRST, SDR0_SRST0_DMC); - mtsdr(SDR0_SRST, 0x00000000); - - /* - * Make sure I2C controller is initialized - * before continuing. - */ - - /* switch to correct I2C bus */ - i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM); - - /*------------------------------------------------------------------ - * Clear out the serial presence detect buffers. - * Perform IIC reads from the dimm. Fill in the spds. - * Check to see if the dimm slots are populated - *-----------------------------------------------------------------*/ - get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks); - - /*------------------------------------------------------------------ - * Check the memory type for the dimms plugged. - *-----------------------------------------------------------------*/ - check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks); - - /*------------------------------------------------------------------ - * Check the frequency supported for the dimms plugged. - *-----------------------------------------------------------------*/ - check_frequency(dimm_populated, iic0_dimm_addr, num_dimm_banks); - - /*------------------------------------------------------------------ - * Check the total rank number. - *-----------------------------------------------------------------*/ - check_rank_number(dimm_populated, iic0_dimm_addr, num_dimm_banks); - - /*------------------------------------------------------------------ - * Check the voltage type for the dimms plugged. - *-----------------------------------------------------------------*/ - check_voltage_type(dimm_populated, iic0_dimm_addr, num_dimm_banks); - - /*------------------------------------------------------------------ - * Program SDRAM controller options 2 register - * Except Enabling of the memory controller. - *-----------------------------------------------------------------*/ - mfsdram(SDRAM_MCOPT2, val); - mtsdram(SDRAM_MCOPT2, - (val & - ~(SDRAM_MCOPT2_SREN_MASK | SDRAM_MCOPT2_PMEN_MASK | - SDRAM_MCOPT2_IPTR_MASK | SDRAM_MCOPT2_XSRP_MASK | - SDRAM_MCOPT2_ISIE_MASK)) - | (SDRAM_MCOPT2_SREN_ENTER | SDRAM_MCOPT2_PMEN_DISABLE | - SDRAM_MCOPT2_IPTR_IDLE | SDRAM_MCOPT2_XSRP_ALLOW | - SDRAM_MCOPT2_ISIE_ENABLE)); - - /*------------------------------------------------------------------ - * Program SDRAM controller options 1 register - * Note: Does not enable the memory controller. - *-----------------------------------------------------------------*/ - program_copt1(dimm_populated, iic0_dimm_addr, num_dimm_banks); - - /*------------------------------------------------------------------ - * Set the SDRAM Controller On Die Termination Register - *-----------------------------------------------------------------*/ - program_codt(dimm_populated, iic0_dimm_addr, num_dimm_banks); - - /*------------------------------------------------------------------ - * Program SDRAM refresh register. - *-----------------------------------------------------------------*/ - program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks); - - /*------------------------------------------------------------------ - * Program SDRAM mode register. - *-----------------------------------------------------------------*/ - program_mode(dimm_populated, iic0_dimm_addr, num_dimm_banks, - &selected_cas, &write_recovery); - - /*------------------------------------------------------------------ - * Set the SDRAM Write Data/DM/DQS Clock Timing Reg - *-----------------------------------------------------------------*/ - mfsdram(SDRAM_WRDTR, val); - mtsdram(SDRAM_WRDTR, (val & ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) | - ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV)); - - /*------------------------------------------------------------------ - * Set the SDRAM Clock Timing Register - *-----------------------------------------------------------------*/ - mfsdram(SDRAM_CLKTR, val); - mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | - ddr_clktr(SDRAM_CLKTR_CLKP_0_DEG)); - - /*------------------------------------------------------------------ - * Program the BxCF registers. - *-----------------------------------------------------------------*/ - program_bxcf(dimm_populated, iic0_dimm_addr, num_dimm_banks); - - /*------------------------------------------------------------------ - * Program SDRAM timing registers. - *-----------------------------------------------------------------*/ - program_tr(dimm_populated, iic0_dimm_addr, num_dimm_banks); - - /*------------------------------------------------------------------ - * Set the Extended Mode register - *-----------------------------------------------------------------*/ - mfsdram(SDRAM_MEMODE, val); - mtsdram(SDRAM_MEMODE, - (val & ~(SDRAM_MEMODE_DIC_MASK | SDRAM_MEMODE_DLL_MASK | - SDRAM_MEMODE_RTT_MASK | SDRAM_MEMODE_DQS_MASK)) | - (SDRAM_MEMODE_DIC_NORMAL | SDRAM_MEMODE_DLL_ENABLE - | SDRAM_MEMODE_RTT_150OHM | SDRAM_MEMODE_DQS_ENABLE)); - - /*------------------------------------------------------------------ - * Program Initialization preload registers. - *-----------------------------------------------------------------*/ - program_initplr(dimm_populated, iic0_dimm_addr, num_dimm_banks, - selected_cas, write_recovery); - - /*------------------------------------------------------------------ - * Delay to ensure 200usec have elapsed since reset. - *-----------------------------------------------------------------*/ - udelay(400); - - /*------------------------------------------------------------------ - * Set the memory queue core base addr. - *-----------------------------------------------------------------*/ - program_memory_queue(dimm_populated, iic0_dimm_addr, num_dimm_banks); - - /*------------------------------------------------------------------ - * Program SDRAM controller options 2 register - * Enable the memory controller. - *-----------------------------------------------------------------*/ - mfsdram(SDRAM_MCOPT2, val); - mtsdram(SDRAM_MCOPT2, - (val & ~(SDRAM_MCOPT2_SREN_MASK | SDRAM_MCOPT2_DCEN_MASK | - SDRAM_MCOPT2_IPTR_MASK | SDRAM_MCOPT2_ISIE_MASK)) | - SDRAM_MCOPT2_IPTR_EXECUTE); - - /*------------------------------------------------------------------ - * Wait for IPTR_EXECUTE init sequence to complete. - *-----------------------------------------------------------------*/ - do { - mfsdram(SDRAM_MCSTAT, val); - } while ((val & SDRAM_MCSTAT_MIC_MASK) == SDRAM_MCSTAT_MIC_NOTCOMP); - - /* enable the controller only after init sequence completes */ - mfsdram(SDRAM_MCOPT2, val); - mtsdram(SDRAM_MCOPT2, (val | SDRAM_MCOPT2_DCEN_ENABLE)); - - /* Make sure delay-line calibration is done before proceeding */ - do { - mfsdram(SDRAM_DLCR, val); - } while (!(val & SDRAM_DLCR_DLCS_COMPLETE)); - - /* get installed memory size */ - dram_size = sdram_memsize(); - - /* - * Limit size to 2GB - */ - if (dram_size > CONFIG_MAX_MEM_MAPPED) - dram_size = CONFIG_MAX_MEM_MAPPED; - - /* and program tlb entries for this size (dynamic) */ - - /* - * Program TLB entries with caches enabled, for best performace - * while auto-calibrating and ECC generation - */ - program_tlb(0, 0, dram_size, 0); - - /*------------------------------------------------------------------ - * DQS calibration. - *-----------------------------------------------------------------*/ -#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) - DQS_autocalibration(); -#else - program_DQS_calibration(dimm_populated, iic0_dimm_addr, num_dimm_banks); -#endif - /* - * Now complete RDSS configuration as mentioned on page 7 of the AMCC - * PowerPC440SP/SPe DDR2 application note: - * "DDR1/DDR2 Initialization Sequence and Dynamic Tuning" - */ - update_rdcc(); - -#ifdef CONFIG_DDR_ECC - /*------------------------------------------------------------------ - * If ecc is enabled, initialize the parity bits. - *-----------------------------------------------------------------*/ - program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks, 0); -#endif - - /* - * Flush the dcache before removing the TLB with caches - * enabled. Otherwise this might lead to problems later on, - * e.g. while booting Linux (as seen on ICON-440SPe). - */ - flush_dcache(); - - /* - * Now after initialization (auto-calibration and ECC generation) - * remove the TLB entries with caches enabled and program again with - * desired cache functionality - */ - remove_tlb(0, dram_size); - program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE); - - ppc4xx_ibm_ddr2_register_dump(); - - /* - * Clear potential errors resulting from auto-calibration. - * If not done, then we could get an interrupt later on when - * exceptions are enabled. - */ - set_mcsr(get_mcsr()); - - gd->ram_size = sdram_memsize(); - - return 0; -} - -static void get_spd_info(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks) -{ - unsigned long dimm_num; - unsigned long dimm_found; - unsigned char num_of_bytes; - unsigned char total_size; - - dimm_found = false; - for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - num_of_bytes = 0; - total_size = 0; - - num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0); - debug("\nspd_read(0x%x) returned %d\n", - iic0_dimm_addr[dimm_num], num_of_bytes); - total_size = spd_read(iic0_dimm_addr[dimm_num], 1); - debug("spd_read(0x%x) returned %d\n", - iic0_dimm_addr[dimm_num], total_size); - - if ((num_of_bytes != 0) && (total_size != 0)) { - dimm_populated[dimm_num] = true; - dimm_found = true; - debug("DIMM slot %lu: populated\n", dimm_num); - } else { - dimm_populated[dimm_num] = false; - debug("DIMM slot %lu: Not populated\n", dimm_num); - } - } - - if (dimm_found == false) { - printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n"); - spd_ddr_init_hang (); - } -} - - -/*------------------------------------------------------------------ - * For the memory DIMMs installed, this routine verifies that they - * really are DDR specific DIMMs. - *-----------------------------------------------------------------*/ -static void check_mem_type(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks) -{ - unsigned long dimm_num; - unsigned long dimm_type; - - for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - if (dimm_populated[dimm_num] == true) { - dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2); - switch (dimm_type) { - case 1: - printf("ERROR: Standard Fast Page Mode DRAM DIMM detected in " - "slot %d.\n", (unsigned int)dimm_num); - printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); - printf("Replace the DIMM module with a supported DIMM.\n\n"); - spd_ddr_init_hang (); - break; - case 2: - printf("ERROR: EDO DIMM detected in slot %d.\n", - (unsigned int)dimm_num); - printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); - printf("Replace the DIMM module with a supported DIMM.\n\n"); - spd_ddr_init_hang (); - break; - case 3: - printf("ERROR: Pipelined Nibble DIMM detected in slot %d.\n", - (unsigned int)dimm_num); - printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); - printf("Replace the DIMM module with a supported DIMM.\n\n"); - spd_ddr_init_hang (); - break; - case 4: - printf("ERROR: SDRAM DIMM detected in slot %d.\n", - (unsigned int)dimm_num); - printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); - printf("Replace the DIMM module with a supported DIMM.\n\n"); - spd_ddr_init_hang (); - break; - case 5: - printf("ERROR: Multiplexed ROM DIMM detected in slot %d.\n", - (unsigned int)dimm_num); - printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); - printf("Replace the DIMM module with a supported DIMM.\n\n"); - spd_ddr_init_hang (); - break; - case 6: - printf("ERROR: SGRAM DIMM detected in slot %d.\n", - (unsigned int)dimm_num); - printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); - printf("Replace the DIMM module with a supported DIMM.\n\n"); - spd_ddr_init_hang (); - break; - case 7: - debug("DIMM slot %lu: DDR1 SDRAM detected\n", dimm_num); - dimm_populated[dimm_num] = SDRAM_DDR1; - break; - case 8: - debug("DIMM slot %lu: DDR2 SDRAM detected\n", dimm_num); - dimm_populated[dimm_num] = SDRAM_DDR2; - break; - default: - printf("ERROR: Unknown DIMM detected in slot %d.\n", - (unsigned int)dimm_num); - printf("Only DDR1 and DDR2 SDRAM DIMMs are supported.\n"); - printf("Replace the DIMM module with a supported DIMM.\n\n"); - spd_ddr_init_hang (); - break; - } - } - } - for (dimm_num = 1; dimm_num < num_dimm_banks; dimm_num++) { - if ((dimm_populated[dimm_num-1] != SDRAM_NONE) - && (dimm_populated[dimm_num] != SDRAM_NONE) - && (dimm_populated[dimm_num-1] != dimm_populated[dimm_num])) { - printf("ERROR: DIMM's DDR1 and DDR2 type can not be mixed.\n"); - spd_ddr_init_hang (); - } - } -} - -/*------------------------------------------------------------------ - * For the memory DIMMs installed, this routine verifies that - * frequency previously calculated is supported. - *-----------------------------------------------------------------*/ -static void check_frequency(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks) -{ - unsigned long dimm_num; - unsigned long tcyc_reg; - unsigned long cycle_time; - unsigned long calc_cycle_time; - unsigned long sdram_freq; - unsigned long sdr_ddrpll; - PPC4xx_SYS_INFO board_cfg; - - /*------------------------------------------------------------------ - * Get the board configuration info. - *-----------------------------------------------------------------*/ - get_sys_info(&board_cfg); - - mfsdr(SDR0_DDR0, sdr_ddrpll); - sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll)); - - /* - * calc_cycle_time is calculated from DDR frequency set by board/chip - * and is expressed in multiple of 10 picoseconds - * to match the way DIMM cycle time is calculated below. - */ - calc_cycle_time = MULDIV64(ONE_BILLION, 100, sdram_freq); - - for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - if (dimm_populated[dimm_num] != SDRAM_NONE) { - tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9); - /* - * Byte 9, Cycle time for CAS Latency=X, is split into two nibbles: - * the higher order nibble (bits 4-7) designates the cycle time - * to a granularity of 1ns; - * the value presented by the lower order nibble (bits 0-3) - * has a granularity of .1ns and is added to the value designated - * by the higher nibble. In addition, four lines of the lower order - * nibble are assigned to support +.25,+.33, +.66 and +.75. - */ - /* Convert from hex to decimal */ - if ((tcyc_reg & 0x0F) == 0x0D) - cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 75; - else if ((tcyc_reg & 0x0F) == 0x0C) - cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 66; - else if ((tcyc_reg & 0x0F) == 0x0B) - cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 33; - else if ((tcyc_reg & 0x0F) == 0x0A) - cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 25; - else - cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + - ((tcyc_reg & 0x0F)*10); - debug("cycle_time=%lu [10 picoseconds]\n", cycle_time); - - if (cycle_time > (calc_cycle_time + 10)) { - /* - * the provided sdram cycle_time is too small - * for the available DIMM cycle_time. - * The additionnal 100ps is here to accept a small incertainty. - */ - printf("ERROR: DRAM DIMM detected with cycle_time %d ps in " - "slot %d \n while calculated cycle time is %d ps.\n", - (unsigned int)(cycle_time*10), - (unsigned int)dimm_num, - (unsigned int)(calc_cycle_time*10)); - printf("Replace the DIMM, or change DDR frequency via " - "strapping bits.\n\n"); - spd_ddr_init_hang (); - } - } - } -} - -/*------------------------------------------------------------------ - * For the memory DIMMs installed, this routine verifies two - * ranks/banks maximum are availables. - *-----------------------------------------------------------------*/ -static void check_rank_number(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks) -{ - unsigned long dimm_num; - unsigned long dimm_rank; - unsigned long total_rank = 0; - - for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - if (dimm_populated[dimm_num] != SDRAM_NONE) { - dimm_rank = spd_read(iic0_dimm_addr[dimm_num], 5); - if (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08) - dimm_rank = (dimm_rank & 0x0F) +1; - else - dimm_rank = dimm_rank & 0x0F; - - - if (dimm_rank > MAXRANKS) { - printf("ERROR: DRAM DIMM detected with %lu ranks in " - "slot %lu is not supported.\n", dimm_rank, dimm_num); - printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS); - printf("Replace the DIMM module with a supported DIMM.\n\n"); - spd_ddr_init_hang (); - } else - total_rank += dimm_rank; - } - if (total_rank > MAXRANKS) { - printf("ERROR: DRAM DIMM detected with a total of %d ranks " - "for all slots.\n", (unsigned int)total_rank); - printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS); - printf("Remove one of the DIMM modules.\n\n"); - spd_ddr_init_hang (); - } - } -} - -/*------------------------------------------------------------------ - * only support 2.5V modules. - * This routine verifies this. - *-----------------------------------------------------------------*/ -static void check_voltage_type(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks) -{ - unsigned long dimm_num; - unsigned long voltage_type; - - for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - if (dimm_populated[dimm_num] != SDRAM_NONE) { - voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8); - switch (voltage_type) { - case 0x00: - printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); - printf("This DIMM is 5.0 Volt/TTL.\n"); - printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", - (unsigned int)dimm_num); - spd_ddr_init_hang (); - break; - case 0x01: - printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); - printf("This DIMM is LVTTL.\n"); - printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", - (unsigned int)dimm_num); - spd_ddr_init_hang (); - break; - case 0x02: - printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); - printf("This DIMM is 1.5 Volt.\n"); - printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", - (unsigned int)dimm_num); - spd_ddr_init_hang (); - break; - case 0x03: - printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); - printf("This DIMM is 3.3 Volt/TTL.\n"); - printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", - (unsigned int)dimm_num); - spd_ddr_init_hang (); - break; - case 0x04: - /* 2.5 Voltage only for DDR1 */ - break; - case 0x05: - /* 1.8 Voltage only for DDR2 */ - break; - default: - printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); - printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", - (unsigned int)dimm_num); - spd_ddr_init_hang (); - break; - } - } - } -} - -/*-----------------------------------------------------------------------------+ - * program_copt1. - *-----------------------------------------------------------------------------*/ -static void program_copt1(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks) -{ - unsigned long dimm_num; - unsigned long mcopt1; - unsigned long ecc_enabled; - unsigned long ecc = 0; - unsigned long data_width = 0; - unsigned long dimm_32bit; - unsigned long dimm_64bit; - unsigned long registered = 0; - unsigned long attribute = 0; - unsigned long buf0, buf1; /* TODO: code to be changed for IOP1.6 to support 4 DIMMs */ - unsigned long bankcount; - unsigned long val; - -#ifdef CONFIG_DDR_ECC - ecc_enabled = true; -#else - ecc_enabled = false; -#endif - dimm_32bit = false; - dimm_64bit = false; - buf0 = false; - buf1 = false; - - /*------------------------------------------------------------------ - * Set memory controller options reg 1, SDRAM_MCOPT1. - *-----------------------------------------------------------------*/ - mfsdram(SDRAM_MCOPT1, val); - mcopt1 = val & ~(SDRAM_MCOPT1_MCHK_MASK | SDRAM_MCOPT1_RDEN_MASK | - SDRAM_MCOPT1_PMU_MASK | SDRAM_MCOPT1_DMWD_MASK | - SDRAM_MCOPT1_UIOS_MASK | SDRAM_MCOPT1_BCNT_MASK | - SDRAM_MCOPT1_DDR_TYPE_MASK | SDRAM_MCOPT1_RWOO_MASK | - SDRAM_MCOPT1_WOOO_MASK | SDRAM_MCOPT1_DCOO_MASK | - SDRAM_MCOPT1_DREF_MASK); - - mcopt1 |= SDRAM_MCOPT1_QDEP; - mcopt1 |= SDRAM_MCOPT1_PMU_OPEN; - mcopt1 |= SDRAM_MCOPT1_RWOO_DISABLED; - mcopt1 |= SDRAM_MCOPT1_WOOO_DISABLED; - mcopt1 |= SDRAM_MCOPT1_DCOO_DISABLED; - mcopt1 |= SDRAM_MCOPT1_DREF_NORMAL; - - for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - if (dimm_populated[dimm_num] != SDRAM_NONE) { - /* test ecc support */ - ecc = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 11); - if (ecc != 0x02) /* ecc not supported */ - ecc_enabled = false; - - /* test bank count */ - bankcount = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 17); - if (bankcount == 0x04) /* bank count = 4 */ - mcopt1 |= SDRAM_MCOPT1_4_BANKS; - else /* bank count = 8 */ - mcopt1 |= SDRAM_MCOPT1_8_BANKS; - - /* test for buffered/unbuffered, registered, differential clocks */ - registered = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 20); - attribute = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 21); - - /* TODO: code to be changed for IOP1.6 to support 4 DIMMs */ - if (dimm_num == 0) { - if (dimm_populated[dimm_num] == SDRAM_DDR1) /* DDR1 type */ - mcopt1 |= SDRAM_MCOPT1_DDR1_TYPE; - if (dimm_populated[dimm_num] == SDRAM_DDR2) /* DDR2 type */ - mcopt1 |= SDRAM_MCOPT1_DDR2_TYPE; - if (registered == 1) { /* DDR2 always buffered */ - /* TODO: what about above comments ? */ - mcopt1 |= SDRAM_MCOPT1_RDEN; - buf0 = true; - } else { - /* TODO: the mask 0x02 doesn't match Samsung def for byte 21. */ - if ((attribute & 0x02) == 0x00) { - /* buffered not supported */ - buf0 = false; - } else { - mcopt1 |= SDRAM_MCOPT1_RDEN; - buf0 = true; - } - } - } - else if (dimm_num == 1) { - if (dimm_populated[dimm_num] == SDRAM_DDR1) /* DDR1 type */ - mcopt1 |= SDRAM_MCOPT1_DDR1_TYPE; - if (dimm_populated[dimm_num] == SDRAM_DDR2) /* DDR2 type */ - mcopt1 |= SDRAM_MCOPT1_DDR2_TYPE; - if (registered == 1) { - /* DDR2 always buffered */ - mcopt1 |= SDRAM_MCOPT1_RDEN; - buf1 = true; - } else { - if ((attribute & 0x02) == 0x00) { - /* buffered not supported */ - buf1 = false; - } else { - mcopt1 |= SDRAM_MCOPT1_RDEN; - buf1 = true; - } - } - } - - /* Note that for DDR2 the byte 7 is reserved, but OK to keep code as is. */ - data_width = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 6) + - (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 7)) << 8); - - switch (data_width) { - case 72: - case 64: - dimm_64bit = true; - break; - case 40: - case 32: - dimm_32bit = true; - break; - default: - printf("WARNING: Detected a DIMM with a data width of %lu bits.\n", - data_width); - printf("Only DIMMs with 32 or 64 bit DDR-SDRAM widths are supported.\n"); - break; - } - } - } - - /* verify matching properties */ - if ((dimm_populated[0] != SDRAM_NONE) && (dimm_populated[1] != SDRAM_NONE)) { - if (buf0 != buf1) { - printf("ERROR: DIMM's buffered/unbuffered, registered, clocking don't match.\n"); - spd_ddr_init_hang (); - } - } - - if ((dimm_64bit == true) && (dimm_32bit == true)) { - printf("ERROR: Cannot mix 32 bit and 64 bit DDR-SDRAM DIMMs together.\n"); - spd_ddr_init_hang (); - } else if ((dimm_64bit == true) && (dimm_32bit == false)) { - mcopt1 |= SDRAM_MCOPT1_DMWD_64; - } else if ((dimm_64bit == false) && (dimm_32bit == true)) { - mcopt1 |= SDRAM_MCOPT1_DMWD_32; - } else { - printf("ERROR: Please install only 32 or 64 bit DDR-SDRAM DIMMs.\n\n"); - spd_ddr_init_hang (); - } - - if (ecc_enabled == true) - mcopt1 |= SDRAM_MCOPT1_MCHK_GEN; - else - mcopt1 |= SDRAM_MCOPT1_MCHK_NON; - - mtsdram(SDRAM_MCOPT1, mcopt1); -} - -/*-----------------------------------------------------------------------------+ - * program_codt. - *-----------------------------------------------------------------------------*/ -static void program_codt(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks) -{ - unsigned long codt; - unsigned long modt0 = 0; - unsigned long modt1 = 0; - unsigned long modt2 = 0; - unsigned long modt3 = 0; - unsigned char dimm_num; - unsigned char dimm_rank; - unsigned char total_rank = 0; - unsigned char total_dimm = 0; - unsigned char dimm_type = 0; - unsigned char firstSlot = 0; - - /*------------------------------------------------------------------ - * Set the SDRAM Controller On Die Termination Register - *-----------------------------------------------------------------*/ - mfsdram(SDRAM_CODT, codt); - codt &= ~(SDRAM_CODT_DQS_SINGLE_END | SDRAM_CODT_CKSE_SINGLE_END); - codt |= SDRAM_CODT_IO_NMODE; - - for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - if (dimm_populated[dimm_num] != SDRAM_NONE) { - dimm_rank = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 5); - if (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08) { - dimm_rank = (dimm_rank & 0x0F) + 1; - dimm_type = SDRAM_DDR2; - } else { - dimm_rank = dimm_rank & 0x0F; - dimm_type = SDRAM_DDR1; - } - - total_rank += dimm_rank; - total_dimm++; - if ((dimm_num == 0) && (total_dimm == 1)) - firstSlot = true; - else - firstSlot = false; - } - } - if (dimm_type == SDRAM_DDR2) { - codt |= SDRAM_CODT_DQS_1_8_V_DDR2; - if ((total_dimm == 1) && (firstSlot == true)) { - if (total_rank == 1) { /* PUUU */ - codt |= CALC_ODT_R(0); - modt0 = CALC_ODT_W(0); - modt1 = 0x00000000; - modt2 = 0x00000000; - modt3 = 0x00000000; - } - if (total_rank == 2) { /* PPUU */ - codt |= CALC_ODT_R(0) | CALC_ODT_R(1); - modt0 = CALC_ODT_W(0) | CALC_ODT_W(1); - modt1 = 0x00000000; - modt2 = 0x00000000; - modt3 = 0x00000000; - } - } else if ((total_dimm == 1) && (firstSlot != true)) { - if (total_rank == 1) { /* UUPU */ - codt |= CALC_ODT_R(2); - modt0 = 0x00000000; - modt1 = 0x00000000; - modt2 = CALC_ODT_W(2); - modt3 = 0x00000000; - } - if (total_rank == 2) { /* UUPP */ - codt |= CALC_ODT_R(2) | CALC_ODT_R(3); - modt0 = 0x00000000; - modt1 = 0x00000000; - modt2 = CALC_ODT_W(2) | CALC_ODT_W(3); - modt3 = 0x00000000; - } - } - if (total_dimm == 2) { - if (total_rank == 2) { /* PUPU */ - codt |= CALC_ODT_R(0) | CALC_ODT_R(2); - modt0 = CALC_ODT_RW(2); - modt1 = 0x00000000; - modt2 = CALC_ODT_RW(0); - modt3 = 0x00000000; - } - if (total_rank == 4) { /* PPPP */ - codt |= CALC_ODT_R(0) | CALC_ODT_R(1) | - CALC_ODT_R(2) | CALC_ODT_R(3); - modt0 = CALC_ODT_RW(2) | CALC_ODT_RW(3); - modt1 = 0x00000000; - modt2 = CALC_ODT_RW(0) | CALC_ODT_RW(1); - modt3 = 0x00000000; - } - } - } else { - codt |= SDRAM_CODT_DQS_2_5_V_DDR1; - modt0 = 0x00000000; - modt1 = 0x00000000; - modt2 = 0x00000000; - modt3 = 0x00000000; - - if (total_dimm == 1) { - if (total_rank == 1) - codt |= 0x00800000; - if (total_rank == 2) - codt |= 0x02800000; - } - if (total_dimm == 2) { - if (total_rank == 2) - codt |= 0x08800000; - if (total_rank == 4) - codt |= 0x2a800000; - } - } - - debug("nb of dimm %d\n", total_dimm); - debug("nb of rank %d\n", total_rank); - if (total_dimm == 1) - debug("dimm in slot %d\n", firstSlot); - - mtsdram(SDRAM_CODT, codt); - mtsdram(SDRAM_MODT0, modt0); - mtsdram(SDRAM_MODT1, modt1); - mtsdram(SDRAM_MODT2, modt2); - mtsdram(SDRAM_MODT3, modt3); -} - -/*-----------------------------------------------------------------------------+ - * program_initplr. - *-----------------------------------------------------------------------------*/ -static void program_initplr(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks, - ddr_cas_id_t selected_cas, - int write_recovery) -{ - u32 cas = 0; - u32 odt = 0; - u32 ods = 0; - u32 mr; - u32 wr; - u32 emr; - u32 emr2; - u32 emr3; - int dimm_num; - int total_dimm = 0; - - /****************************************************** - ** Assumption: if more than one DIMM, all DIMMs are the same - ** as already checked in check_memory_type - ******************************************************/ - - if ((dimm_populated[0] == SDRAM_DDR1) || (dimm_populated[1] == SDRAM_DDR1)) { - mtsdram(SDRAM_INITPLR0, 0x81B80000); - mtsdram(SDRAM_INITPLR1, 0x81900400); - mtsdram(SDRAM_INITPLR2, 0x81810000); - mtsdram(SDRAM_INITPLR3, 0xff800162); - mtsdram(SDRAM_INITPLR4, 0x81900400); - mtsdram(SDRAM_INITPLR5, 0x86080000); - mtsdram(SDRAM_INITPLR6, 0x86080000); - mtsdram(SDRAM_INITPLR7, 0x81000062); - } else if ((dimm_populated[0] == SDRAM_DDR2) || (dimm_populated[1] == SDRAM_DDR2)) { - switch (selected_cas) { - case DDR_CAS_3: - cas = 3 << 4; - break; - case DDR_CAS_4: - cas = 4 << 4; - break; - case DDR_CAS_5: - cas = 5 << 4; - break; - default: - printf("ERROR: ucode error on selected_cas value %d", selected_cas); - spd_ddr_init_hang (); - break; - } - -#if 0 - /* - * ToDo - Still a problem with the write recovery: - * On the Corsair CM2X512-5400C4 module, setting write recovery - * in the INITPLR reg to the value calculated in program_mode() - * results in not correctly working DDR2 memory (crash after - * relocation). - * - * So for now, set the write recovery to 3. This seems to work - * on the Corair module too. - * - * 2007-03-01, sr - */ - switch (write_recovery) { - case 3: - wr = WRITE_RECOV_3; - break; - case 4: - wr = WRITE_RECOV_4; - break; - case 5: - wr = WRITE_RECOV_5; - break; - case 6: - wr = WRITE_RECOV_6; - break; - default: - printf("ERROR: write recovery not support (%d)", write_recovery); - spd_ddr_init_hang (); - break; - } -#else - wr = WRITE_RECOV_3; /* test-only, see description above */ -#endif - - for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) - if (dimm_populated[dimm_num] != SDRAM_NONE) - total_dimm++; - if (total_dimm == 1) { - odt = ODT_150_OHM; - ods = ODS_FULL; - } else if (total_dimm == 2) { - odt = ODT_75_OHM; - ods = ODS_REDUCED; - } else { - printf("ERROR: Unsupported number of DIMM's (%d)", total_dimm); - spd_ddr_init_hang (); - } - - mr = CMD_EMR | SELECT_MR | BURST_LEN_4 | wr | cas; - emr = CMD_EMR | SELECT_EMR | odt | ods; - emr2 = CMD_EMR | SELECT_EMR2; - emr3 = CMD_EMR | SELECT_EMR3; - /* NOP - Wait 106 MemClk cycles */ - mtsdram(SDRAM_INITPLR0, SDRAM_INITPLR_ENABLE | CMD_NOP | - SDRAM_INITPLR_IMWT_ENCODE(106)); - udelay(1000); - /* precharge 4 MemClk cycles */ - mtsdram(SDRAM_INITPLR1, SDRAM_INITPLR_ENABLE | CMD_PRECHARGE | - SDRAM_INITPLR_IMWT_ENCODE(4)); - /* EMR2 - Wait tMRD (2 MemClk cycles) */ - mtsdram(SDRAM_INITPLR2, SDRAM_INITPLR_ENABLE | emr2 | - SDRAM_INITPLR_IMWT_ENCODE(2)); - /* EMR3 - Wait tMRD (2 MemClk cycles) */ - mtsdram(SDRAM_INITPLR3, SDRAM_INITPLR_ENABLE | emr3 | - SDRAM_INITPLR_IMWT_ENCODE(2)); - /* EMR DLL ENABLE - Wait tMRD (2 MemClk cycles) */ - mtsdram(SDRAM_INITPLR4, SDRAM_INITPLR_ENABLE | emr | - SDRAM_INITPLR_IMWT_ENCODE(2)); - /* MR w/ DLL reset - 200 cycle wait for DLL reset */ - mtsdram(SDRAM_INITPLR5, SDRAM_INITPLR_ENABLE | mr | DLL_RESET | - SDRAM_INITPLR_IMWT_ENCODE(200)); - udelay(1000); - /* precharge 4 MemClk cycles */ - mtsdram(SDRAM_INITPLR6, SDRAM_INITPLR_ENABLE | CMD_PRECHARGE | - SDRAM_INITPLR_IMWT_ENCODE(4)); - /* Refresh 25 MemClk cycles */ - mtsdram(SDRAM_INITPLR7, SDRAM_INITPLR_ENABLE | CMD_REFRESH | - SDRAM_INITPLR_IMWT_ENCODE(25)); - /* Refresh 25 MemClk cycles */ - mtsdram(SDRAM_INITPLR8, SDRAM_INITPLR_ENABLE | CMD_REFRESH | - SDRAM_INITPLR_IMWT_ENCODE(25)); - /* Refresh 25 MemClk cycles */ - mtsdram(SDRAM_INITPLR9, SDRAM_INITPLR_ENABLE | CMD_REFRESH | - SDRAM_INITPLR_IMWT_ENCODE(25)); - /* Refresh 25 MemClk cycles */ - mtsdram(SDRAM_INITPLR10, SDRAM_INITPLR_ENABLE | CMD_REFRESH | - SDRAM_INITPLR_IMWT_ENCODE(25)); - /* MR w/o DLL reset - Wait tMRD (2 MemClk cycles) */ - mtsdram(SDRAM_INITPLR11, SDRAM_INITPLR_ENABLE | mr | - SDRAM_INITPLR_IMWT_ENCODE(2)); - /* EMR OCD Default - Wait tMRD (2 MemClk cycles) */ - mtsdram(SDRAM_INITPLR12, SDRAM_INITPLR_ENABLE | OCD_CALIB_DEF | - SDRAM_INITPLR_IMWT_ENCODE(2) | emr); - /* EMR OCD Exit */ - mtsdram(SDRAM_INITPLR13, SDRAM_INITPLR_ENABLE | emr | - SDRAM_INITPLR_IMWT_ENCODE(2)); - } else { - printf("ERROR: ucode error as unknown DDR type in program_initplr"); - spd_ddr_init_hang (); - } -} - -/*------------------------------------------------------------------ - * This routine programs the SDRAM_MMODE register. - * the selected_cas is an output parameter, that will be passed - * by caller to call the above program_initplr( ) - *-----------------------------------------------------------------*/ -static void program_mode(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks, - ddr_cas_id_t *selected_cas, - int *write_recovery) -{ - unsigned long dimm_num; - unsigned long sdram_ddr1; - unsigned long t_wr_ns; - unsigned long t_wr_clk; - unsigned long cas_bit; - unsigned long cas_index; - unsigned long sdram_freq; - unsigned long ddr_check; - unsigned long mmode; - unsigned long tcyc_reg; - unsigned long cycle_2_0_clk; - unsigned long cycle_2_5_clk; - unsigned long cycle_3_0_clk; - unsigned long cycle_4_0_clk; - unsigned long cycle_5_0_clk; - unsigned long max_2_0_tcyc_ns_x_100; - unsigned long max_2_5_tcyc_ns_x_100; - unsigned long max_3_0_tcyc_ns_x_100; - unsigned long max_4_0_tcyc_ns_x_100; - unsigned long max_5_0_tcyc_ns_x_100; - unsigned long cycle_time_ns_x_100[3]; - PPC4xx_SYS_INFO board_cfg; - unsigned char cas_2_0_available; - unsigned char cas_2_5_available; - unsigned char cas_3_0_available; - unsigned char cas_4_0_available; - unsigned char cas_5_0_available; - unsigned long sdr_ddrpll; - - /*------------------------------------------------------------------ - * Get the board configuration info. - *-----------------------------------------------------------------*/ - get_sys_info(&board_cfg); - - mfsdr(SDR0_DDR0, sdr_ddrpll); - sdram_freq = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(sdr_ddrpll), 1); - debug("sdram_freq=%lu\n", sdram_freq); - - /*------------------------------------------------------------------ - * Handle the timing. We need to find the worst case timing of all - * the dimm modules installed. - *-----------------------------------------------------------------*/ - t_wr_ns = 0; - cas_2_0_available = true; - cas_2_5_available = true; - cas_3_0_available = true; - cas_4_0_available = true; - cas_5_0_available = true; - max_2_0_tcyc_ns_x_100 = 10; - max_2_5_tcyc_ns_x_100 = 10; - max_3_0_tcyc_ns_x_100 = 10; - max_4_0_tcyc_ns_x_100 = 10; - max_5_0_tcyc_ns_x_100 = 10; - sdram_ddr1 = true; - - /* loop through all the DIMM slots on the board */ - for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - /* If a dimm is installed in a particular slot ... */ - if (dimm_populated[dimm_num] != SDRAM_NONE) { - if (dimm_populated[dimm_num] == SDRAM_DDR1) - sdram_ddr1 = true; - else - sdram_ddr1 = false; - - cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18); - debug("cas_bit[SPD byte 18]=%02lx\n", cas_bit); - - /* For a particular DIMM, grab the three CAS values it supports */ - for (cas_index = 0; cas_index < 3; cas_index++) { - switch (cas_index) { - case 0: - tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9); - break; - case 1: - tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23); - break; - default: - tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25); - break; - } - - if ((tcyc_reg & 0x0F) >= 10) { - if ((tcyc_reg & 0x0F) == 0x0D) { - /* Convert from hex to decimal */ - cycle_time_ns_x_100[cas_index] = - (((tcyc_reg & 0xF0) >> 4) * 100) + 75; - } else { - printf("ERROR: SPD reported Tcyc is incorrect for DIMM " - "in slot %d\n", (unsigned int)dimm_num); - spd_ddr_init_hang (); - } - } else { - /* Convert from hex to decimal */ - cycle_time_ns_x_100[cas_index] = - (((tcyc_reg & 0xF0) >> 4) * 100) + - ((tcyc_reg & 0x0F)*10); - } - debug("cas_index=%lu: cycle_time_ns_x_100=%lu\n", cas_index, - cycle_time_ns_x_100[cas_index]); - } - - /* The rest of this routine determines if CAS 2.0, 2.5, 3.0, 4.0 and 5.0 are */ - /* supported for a particular DIMM. */ - cas_index = 0; - - if (sdram_ddr1) { - /* - * DDR devices use the following bitmask for CAS latency: - * Bit 7 6 5 4 3 2 1 0 - * TBD 4.0 3.5 3.0 2.5 2.0 1.5 1.0 - */ - if (((cas_bit & 0x40) == 0x40) && (cas_index < 3) && - (cycle_time_ns_x_100[cas_index] != 0)) { - max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100, - cycle_time_ns_x_100[cas_index]); - cas_index++; - } else { - if (cas_index != 0) - cas_index++; - cas_4_0_available = false; - } - - if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) && - (cycle_time_ns_x_100[cas_index] != 0)) { - max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100, - cycle_time_ns_x_100[cas_index]); - cas_index++; - } else { - if (cas_index != 0) - cas_index++; - cas_3_0_available = false; - } - - if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) && - (cycle_time_ns_x_100[cas_index] != 0)) { - max_2_5_tcyc_ns_x_100 = max(max_2_5_tcyc_ns_x_100, - cycle_time_ns_x_100[cas_index]); - cas_index++; - } else { - if (cas_index != 0) - cas_index++; - cas_2_5_available = false; - } - - if (((cas_bit & 0x04) == 0x04) && (cas_index < 3) && - (cycle_time_ns_x_100[cas_index] != 0)) { - max_2_0_tcyc_ns_x_100 = max(max_2_0_tcyc_ns_x_100, - cycle_time_ns_x_100[cas_index]); - cas_index++; - } else { - if (cas_index != 0) - cas_index++; - cas_2_0_available = false; - } - } else { - /* - * DDR2 devices use the following bitmask for CAS latency: - * Bit 7 6 5 4 3 2 1 0 - * TBD 6.0 5.0 4.0 3.0 2.0 TBD TBD - */ - if (((cas_bit & 0x20) == 0x20) && (cas_index < 3) && - (cycle_time_ns_x_100[cas_index] != 0)) { - max_5_0_tcyc_ns_x_100 = max(max_5_0_tcyc_ns_x_100, - cycle_time_ns_x_100[cas_index]); - cas_index++; - } else { - if (cas_index != 0) - cas_index++; - cas_5_0_available = false; - } - - if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) && - (cycle_time_ns_x_100[cas_index] != 0)) { - max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100, - cycle_time_ns_x_100[cas_index]); - cas_index++; - } else { - if (cas_index != 0) - cas_index++; - cas_4_0_available = false; - } - - if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) && - (cycle_time_ns_x_100[cas_index] != 0)) { - max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100, - cycle_time_ns_x_100[cas_index]); - cas_index++; - } else { - if (cas_index != 0) - cas_index++; - cas_3_0_available = false; - } - } - } - } - - /*------------------------------------------------------------------ - * Set the SDRAM mode, SDRAM_MMODE - *-----------------------------------------------------------------*/ - mfsdram(SDRAM_MMODE, mmode); - mmode = mmode & ~(SDRAM_MMODE_WR_MASK | SDRAM_MMODE_DCL_MASK); - - /* add 10 here because of rounding problems */ - cycle_2_0_clk = MULDIV64(ONE_BILLION, 100, max_2_0_tcyc_ns_x_100) + 10; - cycle_2_5_clk = MULDIV64(ONE_BILLION, 100, max_2_5_tcyc_ns_x_100) + 10; - cycle_3_0_clk = MULDIV64(ONE_BILLION, 100, max_3_0_tcyc_ns_x_100) + 10; - cycle_4_0_clk = MULDIV64(ONE_BILLION, 100, max_4_0_tcyc_ns_x_100) + 10; - cycle_5_0_clk = MULDIV64(ONE_BILLION, 100, max_5_0_tcyc_ns_x_100) + 10; - debug("cycle_3_0_clk=%lu\n", cycle_3_0_clk); - debug("cycle_4_0_clk=%lu\n", cycle_4_0_clk); - debug("cycle_5_0_clk=%lu\n", cycle_5_0_clk); - - if (sdram_ddr1 == true) { /* DDR1 */ - if ((cas_2_0_available == true) && - (sdram_freq <= cycle_2_0_clk)) { - mmode |= SDRAM_MMODE_DCL_DDR1_2_0_CLK; - *selected_cas = DDR_CAS_2; - } else if ((cas_2_5_available == true) && - (sdram_freq <= cycle_2_5_clk)) { - mmode |= SDRAM_MMODE_DCL_DDR1_2_5_CLK; - *selected_cas = DDR_CAS_2_5; - } else if ((cas_3_0_available == true) && - (sdram_freq <= cycle_3_0_clk)) { - mmode |= SDRAM_MMODE_DCL_DDR1_3_0_CLK; - *selected_cas = DDR_CAS_3; - } else { - printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n"); - printf("Only DIMMs DDR1 with CAS latencies of 2.0, 2.5, and 3.0 are supported.\n"); - printf("Make sure the PLB speed is within the supported range of the DIMMs.\n\n"); - spd_ddr_init_hang (); - } - } else { /* DDR2 */ - debug("cas_3_0_available=%d\n", cas_3_0_available); - debug("cas_4_0_available=%d\n", cas_4_0_available); - debug("cas_5_0_available=%d\n", cas_5_0_available); - if ((cas_3_0_available == true) && - (sdram_freq <= cycle_3_0_clk)) { - mmode |= SDRAM_MMODE_DCL_DDR2_3_0_CLK; - *selected_cas = DDR_CAS_3; - } else if ((cas_4_0_available == true) && - (sdram_freq <= cycle_4_0_clk)) { - mmode |= SDRAM_MMODE_DCL_DDR2_4_0_CLK; - *selected_cas = DDR_CAS_4; - } else if ((cas_5_0_available == true) && - (sdram_freq <= cycle_5_0_clk)) { - mmode |= SDRAM_MMODE_DCL_DDR2_5_0_CLK; - *selected_cas = DDR_CAS_5; - } else { - printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n"); - printf("Only DIMMs DDR2 with CAS latencies of 3.0, 4.0, and 5.0 are supported.\n"); - printf("Make sure the PLB speed is within the supported range of the DIMMs.\n"); - printf("cas3=%d cas4=%d cas5=%d\n", - cas_3_0_available, cas_4_0_available, cas_5_0_available); - printf("sdram_freq=%lu cycle3=%lu cycle4=%lu cycle5=%lu\n\n", - sdram_freq, cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk); - spd_ddr_init_hang (); - } - } - - if (sdram_ddr1 == true) - mmode |= SDRAM_MMODE_WR_DDR1; - else { - - /* loop through all the DIMM slots on the board */ - for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - /* If a dimm is installed in a particular slot ... */ - if (dimm_populated[dimm_num] != SDRAM_NONE) - t_wr_ns = max(t_wr_ns, (unsigned long) - spd_read(iic0_dimm_addr[dimm_num], 36) >> 2); - } - - /* - * convert from nanoseconds to ddr clocks - * round up if necessary - */ - t_wr_clk = MULDIV64(sdram_freq, t_wr_ns, ONE_BILLION); - ddr_check = MULDIV64(ONE_BILLION, t_wr_clk, t_wr_ns); - if (sdram_freq != ddr_check) - t_wr_clk++; - - switch (t_wr_clk) { - case 0: - case 1: - case 2: - case 3: - mmode |= SDRAM_MMODE_WR_DDR2_3_CYC; - break; - case 4: - mmode |= SDRAM_MMODE_WR_DDR2_4_CYC; - break; - case 5: - mmode |= SDRAM_MMODE_WR_DDR2_5_CYC; - break; - default: - mmode |= SDRAM_MMODE_WR_DDR2_6_CYC; - break; - } - *write_recovery = t_wr_clk; - } - - debug("CAS latency = %d\n", *selected_cas); - debug("Write recovery = %d\n", *write_recovery); - - mtsdram(SDRAM_MMODE, mmode); -} - -/*-----------------------------------------------------------------------------+ - * program_rtr. - *-----------------------------------------------------------------------------*/ -static void program_rtr(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks) -{ - PPC4xx_SYS_INFO board_cfg; - unsigned long max_refresh_rate; - unsigned long dimm_num; - unsigned long refresh_rate_type; - unsigned long refresh_rate; - unsigned long rint; - unsigned long sdram_freq; - unsigned long sdr_ddrpll; - unsigned long val; - - /*------------------------------------------------------------------ - * Get the board configuration info. - *-----------------------------------------------------------------*/ - get_sys_info(&board_cfg); - - /*------------------------------------------------------------------ - * Set the SDRAM Refresh Timing Register, SDRAM_RTR - *-----------------------------------------------------------------*/ - mfsdr(SDR0_DDR0, sdr_ddrpll); - sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll)); - - max_refresh_rate = 0; - for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - if (dimm_populated[dimm_num] != SDRAM_NONE) { - - refresh_rate_type = spd_read(iic0_dimm_addr[dimm_num], 12); - refresh_rate_type &= 0x7F; - switch (refresh_rate_type) { - case 0: - refresh_rate = 15625; - break; - case 1: - refresh_rate = 3906; - break; - case 2: - refresh_rate = 7812; - break; - case 3: - refresh_rate = 31250; - break; - case 4: - refresh_rate = 62500; - break; - case 5: - refresh_rate = 125000; - break; - default: - refresh_rate = 0; - printf("ERROR: DIMM %d unsupported refresh rate/type.\n", - (unsigned int)dimm_num); - printf("Replace the DIMM module with a supported DIMM.\n\n"); - spd_ddr_init_hang (); - break; - } - - max_refresh_rate = max(max_refresh_rate, refresh_rate); - } - } - - rint = MULDIV64(sdram_freq, max_refresh_rate, ONE_BILLION); - mfsdram(SDRAM_RTR, val); - mtsdram(SDRAM_RTR, (val & ~SDRAM_RTR_RINT_MASK) | - (SDRAM_RTR_RINT_ENCODE(rint))); -} - -/*------------------------------------------------------------------ - * This routine programs the SDRAM_TRx registers. - *-----------------------------------------------------------------*/ -static void program_tr(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks) -{ - unsigned long dimm_num; - unsigned long sdram_ddr1; - unsigned long t_rp_ns; - unsigned long t_rcd_ns; - unsigned long t_rrd_ns; - unsigned long t_ras_ns; - unsigned long t_rc_ns; - unsigned long t_rfc_ns; - unsigned long t_wpc_ns; - unsigned long t_wtr_ns; - unsigned long t_rpc_ns; - unsigned long t_rp_clk; - unsigned long t_rcd_clk; - unsigned long t_rrd_clk; - unsigned long t_ras_clk; - unsigned long t_rc_clk; - unsigned long t_rfc_clk; - unsigned long t_wpc_clk; - unsigned long t_wtr_clk; - unsigned long t_rpc_clk; - unsigned long sdtr1, sdtr2, sdtr3; - unsigned long ddr_check; - unsigned long sdram_freq; - unsigned long sdr_ddrpll; - - PPC4xx_SYS_INFO board_cfg; - - /*------------------------------------------------------------------ - * Get the board configuration info. - *-----------------------------------------------------------------*/ - get_sys_info(&board_cfg); - - mfsdr(SDR0_DDR0, sdr_ddrpll); - sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll)); - - /*------------------------------------------------------------------ - * Handle the timing. We need to find the worst case timing of all - * the dimm modules installed. - *-----------------------------------------------------------------*/ - t_rp_ns = 0; - t_rrd_ns = 0; - t_rcd_ns = 0; - t_ras_ns = 0; - t_rc_ns = 0; - t_rfc_ns = 0; - t_wpc_ns = 0; - t_wtr_ns = 0; - t_rpc_ns = 0; - sdram_ddr1 = true; - - /* loop through all the DIMM slots on the board */ - for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - /* If a dimm is installed in a particular slot ... */ - if (dimm_populated[dimm_num] != SDRAM_NONE) { - if (dimm_populated[dimm_num] == SDRAM_DDR2) - sdram_ddr1 = true; - else - sdram_ddr1 = false; - - t_rcd_ns = max(t_rcd_ns, - (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 29) >> 2); - t_rrd_ns = max(t_rrd_ns, - (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 28) >> 2); - t_rp_ns = max(t_rp_ns, - (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 27) >> 2); - t_ras_ns = max(t_ras_ns, - (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 30)); - t_rc_ns = max(t_rc_ns, - (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 41)); - t_rfc_ns = max(t_rfc_ns, - (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 42)); - } - } - - /*------------------------------------------------------------------ - * Set the SDRAM Timing Reg 1, SDRAM_TR1 - *-----------------------------------------------------------------*/ - mfsdram(SDRAM_SDTR1, sdtr1); - sdtr1 &= ~(SDRAM_SDTR1_LDOF_MASK | SDRAM_SDTR1_RTW_MASK | - SDRAM_SDTR1_WTWO_MASK | SDRAM_SDTR1_RTRO_MASK); - - /* default values */ - sdtr1 |= SDRAM_SDTR1_LDOF_2_CLK; - sdtr1 |= SDRAM_SDTR1_RTW_2_CLK; - - /* normal operations */ - sdtr1 |= SDRAM_SDTR1_WTWO_0_CLK; - sdtr1 |= SDRAM_SDTR1_RTRO_1_CLK; - - mtsdram(SDRAM_SDTR1, sdtr1); - - /*------------------------------------------------------------------ - * Set the SDRAM Timing Reg 2, SDRAM_TR2 - *-----------------------------------------------------------------*/ - mfsdram(SDRAM_SDTR2, sdtr2); - sdtr2 &= ~(SDRAM_SDTR2_RCD_MASK | SDRAM_SDTR2_WTR_MASK | - SDRAM_SDTR2_XSNR_MASK | SDRAM_SDTR2_WPC_MASK | - SDRAM_SDTR2_RPC_MASK | SDRAM_SDTR2_RP_MASK | - SDRAM_SDTR2_RRD_MASK); - - /* - * convert t_rcd from nanoseconds to ddr clocks - * round up if necessary - */ - t_rcd_clk = MULDIV64(sdram_freq, t_rcd_ns, ONE_BILLION); - ddr_check = MULDIV64(ONE_BILLION, t_rcd_clk, t_rcd_ns); - if (sdram_freq != ddr_check) - t_rcd_clk++; - - switch (t_rcd_clk) { - case 0: - case 1: - sdtr2 |= SDRAM_SDTR2_RCD_1_CLK; - break; - case 2: - sdtr2 |= SDRAM_SDTR2_RCD_2_CLK; - break; - case 3: - sdtr2 |= SDRAM_SDTR2_RCD_3_CLK; - break; - case 4: - sdtr2 |= SDRAM_SDTR2_RCD_4_CLK; - break; - default: - sdtr2 |= SDRAM_SDTR2_RCD_5_CLK; - break; - } - - if (sdram_ddr1 == true) { /* DDR1 */ - if (sdram_freq < 200000000) { - sdtr2 |= SDRAM_SDTR2_WTR_1_CLK; - sdtr2 |= SDRAM_SDTR2_WPC_2_CLK; - sdtr2 |= SDRAM_SDTR2_RPC_2_CLK; - } else { - sdtr2 |= SDRAM_SDTR2_WTR_2_CLK; - sdtr2 |= SDRAM_SDTR2_WPC_3_CLK; - sdtr2 |= SDRAM_SDTR2_RPC_2_CLK; - } - } else { /* DDR2 */ - /* loop through all the DIMM slots on the board */ - for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - /* If a dimm is installed in a particular slot ... */ - if (dimm_populated[dimm_num] != SDRAM_NONE) { - t_wpc_ns = max(t_wtr_ns, - (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 36) >> 2); - t_wtr_ns = max(t_wtr_ns, - (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 37) >> 2); - t_rpc_ns = max(t_rpc_ns, - (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 38) >> 2); - } - } - - /* - * convert from nanoseconds to ddr clocks - * round up if necessary - */ - t_wpc_clk = MULDIV64(sdram_freq, t_wpc_ns, ONE_BILLION); - ddr_check = MULDIV64(ONE_BILLION, t_wpc_clk, t_wpc_ns); - if (sdram_freq != ddr_check) - t_wpc_clk++; - - switch (t_wpc_clk) { - case 0: - case 1: - case 2: - sdtr2 |= SDRAM_SDTR2_WPC_2_CLK; - break; - case 3: - sdtr2 |= SDRAM_SDTR2_WPC_3_CLK; - break; - case 4: - sdtr2 |= SDRAM_SDTR2_WPC_4_CLK; - break; - case 5: - sdtr2 |= SDRAM_SDTR2_WPC_5_CLK; - break; - default: - sdtr2 |= SDRAM_SDTR2_WPC_6_CLK; - break; - } - - /* - * convert from nanoseconds to ddr clocks - * round up if necessary - */ - t_wtr_clk = MULDIV64(sdram_freq, t_wtr_ns, ONE_BILLION); - ddr_check = MULDIV64(ONE_BILLION, t_wtr_clk, t_wtr_ns); - if (sdram_freq != ddr_check) - t_wtr_clk++; - - switch (t_wtr_clk) { - case 0: - case 1: - sdtr2 |= SDRAM_SDTR2_WTR_1_CLK; - break; - case 2: - sdtr2 |= SDRAM_SDTR2_WTR_2_CLK; - break; - case 3: - sdtr2 |= SDRAM_SDTR2_WTR_3_CLK; - break; - default: - sdtr2 |= SDRAM_SDTR2_WTR_4_CLK; - break; - } - - /* - * convert from nanoseconds to ddr clocks - * round up if necessary - */ - t_rpc_clk = MULDIV64(sdram_freq, t_rpc_ns, ONE_BILLION); - ddr_check = MULDIV64(ONE_BILLION, t_rpc_clk, t_rpc_ns); - if (sdram_freq != ddr_check) - t_rpc_clk++; - - switch (t_rpc_clk) { - case 0: - case 1: - case 2: - sdtr2 |= SDRAM_SDTR2_RPC_2_CLK; - break; - case 3: - sdtr2 |= SDRAM_SDTR2_RPC_3_CLK; - break; - default: - sdtr2 |= SDRAM_SDTR2_RPC_4_CLK; - break; - } - } - - /* default value */ - sdtr2 |= SDRAM_SDTR2_XSNR_16_CLK; - - /* - * convert t_rrd from nanoseconds to ddr clocks - * round up if necessary - */ - t_rrd_clk = MULDIV64(sdram_freq, t_rrd_ns, ONE_BILLION); - ddr_check = MULDIV64(ONE_BILLION, t_rrd_clk, t_rrd_ns); - if (sdram_freq != ddr_check) - t_rrd_clk++; - - if (t_rrd_clk == 3) - sdtr2 |= SDRAM_SDTR2_RRD_3_CLK; - else - sdtr2 |= SDRAM_SDTR2_RRD_2_CLK; - - /* - * convert t_rp from nanoseconds to ddr clocks - * round up if necessary - */ - t_rp_clk = MULDIV64(sdram_freq, t_rp_ns, ONE_BILLION); - ddr_check = MULDIV64(ONE_BILLION, t_rp_clk, t_rp_ns); - if (sdram_freq != ddr_check) - t_rp_clk++; - - switch (t_rp_clk) { - case 0: - case 1: - case 2: - case 3: - sdtr2 |= SDRAM_SDTR2_RP_3_CLK; - break; - case 4: - sdtr2 |= SDRAM_SDTR2_RP_4_CLK; - break; - case 5: - sdtr2 |= SDRAM_SDTR2_RP_5_CLK; - break; - case 6: - sdtr2 |= SDRAM_SDTR2_RP_6_CLK; - break; - default: - sdtr2 |= SDRAM_SDTR2_RP_7_CLK; - break; - } - - mtsdram(SDRAM_SDTR2, sdtr2); - - /*------------------------------------------------------------------ - * Set the SDRAM Timing Reg 3, SDRAM_TR3 - *-----------------------------------------------------------------*/ - mfsdram(SDRAM_SDTR3, sdtr3); - sdtr3 &= ~(SDRAM_SDTR3_RAS_MASK | SDRAM_SDTR3_RC_MASK | - SDRAM_SDTR3_XCS_MASK | SDRAM_SDTR3_RFC_MASK); - - /* - * convert t_ras from nanoseconds to ddr clocks - * round up if necessary - */ - t_ras_clk = MULDIV64(sdram_freq, t_ras_ns, ONE_BILLION); - ddr_check = MULDIV64(ONE_BILLION, t_ras_clk, t_ras_ns); - if (sdram_freq != ddr_check) - t_ras_clk++; - - sdtr3 |= SDRAM_SDTR3_RAS_ENCODE(t_ras_clk); - - /* - * convert t_rc from nanoseconds to ddr clocks - * round up if necessary - */ - t_rc_clk = MULDIV64(sdram_freq, t_rc_ns, ONE_BILLION); - ddr_check = MULDIV64(ONE_BILLION, t_rc_clk, t_rc_ns); - if (sdram_freq != ddr_check) - t_rc_clk++; - - sdtr3 |= SDRAM_SDTR3_RC_ENCODE(t_rc_clk); - - /* default xcs value */ - sdtr3 |= SDRAM_SDTR3_XCS; - - /* - * convert t_rfc from nanoseconds to ddr clocks - * round up if necessary - */ - t_rfc_clk = MULDIV64(sdram_freq, t_rfc_ns, ONE_BILLION); - ddr_check = MULDIV64(ONE_BILLION, t_rfc_clk, t_rfc_ns); - if (sdram_freq != ddr_check) - t_rfc_clk++; - - sdtr3 |= SDRAM_SDTR3_RFC_ENCODE(t_rfc_clk); - - mtsdram(SDRAM_SDTR3, sdtr3); -} - -/*-----------------------------------------------------------------------------+ - * program_bxcf. - *-----------------------------------------------------------------------------*/ -static void program_bxcf(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks) -{ - unsigned long dimm_num; - unsigned long num_col_addr; - unsigned long num_ranks; - unsigned long num_banks; - unsigned long mode; - unsigned long ind_rank; - unsigned long ind; - unsigned long ind_bank; - unsigned long bank_0_populated; - - /*------------------------------------------------------------------ - * Set the BxCF regs. First, wipe out the bank config registers. - *-----------------------------------------------------------------*/ - mtsdram(SDRAM_MB0CF, 0x00000000); - mtsdram(SDRAM_MB1CF, 0x00000000); - mtsdram(SDRAM_MB2CF, 0x00000000); - mtsdram(SDRAM_MB3CF, 0x00000000); - - mode = SDRAM_BXCF_M_BE_ENABLE; - - bank_0_populated = 0; - - for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - if (dimm_populated[dimm_num] != SDRAM_NONE) { - num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4); - num_ranks = spd_read(iic0_dimm_addr[dimm_num], 5); - if ((spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08) - num_ranks = (num_ranks & 0x0F) +1; - else - num_ranks = num_ranks & 0x0F; - - num_banks = spd_read(iic0_dimm_addr[dimm_num], 17); - - for (ind_bank = 0; ind_bank < 2; ind_bank++) { - if (num_banks == 4) - ind = 0; - else - ind = 5 << 8; - switch (num_col_addr) { - case 0x08: - mode |= (SDRAM_BXCF_M_AM_0 + ind); - break; - case 0x09: - mode |= (SDRAM_BXCF_M_AM_1 + ind); - break; - case 0x0A: - mode |= (SDRAM_BXCF_M_AM_2 + ind); - break; - case 0x0B: - mode |= (SDRAM_BXCF_M_AM_3 + ind); - break; - case 0x0C: - mode |= (SDRAM_BXCF_M_AM_4 + ind); - break; - default: - printf("DDR-SDRAM: DIMM %d BxCF configuration.\n", - (unsigned int)dimm_num); - printf("ERROR: Unsupported value for number of " - "column addresses: %d.\n", (unsigned int)num_col_addr); - printf("Replace the DIMM module with a supported DIMM.\n\n"); - spd_ddr_init_hang (); - } - } - - if ((dimm_populated[dimm_num] != SDRAM_NONE)&& (dimm_num ==1)) - bank_0_populated = 1; - - for (ind_rank = 0; ind_rank < num_ranks; ind_rank++) { - mtsdram(SDRAM_MB0CF + - ((dimm_num + bank_0_populated + ind_rank) << 2), - mode); - } - } - } -} - -/*------------------------------------------------------------------ - * program memory queue. - *-----------------------------------------------------------------*/ -static void program_memory_queue(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks) -{ - unsigned long dimm_num; - phys_size_t rank_base_addr; - unsigned long rank_reg; - phys_size_t rank_size_bytes; - unsigned long rank_size_id; - unsigned long num_ranks; - unsigned long baseadd_size; - unsigned long i; - unsigned long bank_0_populated = 0; - phys_size_t total_size = 0; - - /*------------------------------------------------------------------ - * Reset the rank_base_address. - *-----------------------------------------------------------------*/ - rank_reg = SDRAM_R0BAS; - - rank_base_addr = 0x00000000; - - for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { - if (dimm_populated[dimm_num] != SDRAM_NONE) { - num_ranks = spd_read(iic0_dimm_addr[dimm_num], 5); - if ((spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08) - num_ranks = (num_ranks & 0x0F) + 1; - else - num_ranks = num_ranks & 0x0F; - - rank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31); - - /*------------------------------------------------------------------ - * Set the sizes - *-----------------------------------------------------------------*/ - baseadd_size = 0; - switch (rank_size_id) { - case 0x01: - baseadd_size |= SDRAM_RXBAS_SDSZ_1024; - total_size = 1024; - break; - case 0x02: - baseadd_size |= SDRAM_RXBAS_SDSZ_2048; - total_size = 2048; - break; - case 0x04: - baseadd_size |= SDRAM_RXBAS_SDSZ_4096; - total_size = 4096; - break; - case 0x08: - baseadd_size |= SDRAM_RXBAS_SDSZ_32; - total_size = 32; - break; - case 0x10: - baseadd_size |= SDRAM_RXBAS_SDSZ_64; - total_size = 64; - break; - case 0x20: - baseadd_size |= SDRAM_RXBAS_SDSZ_128; - total_size = 128; - break; - case 0x40: - baseadd_size |= SDRAM_RXBAS_SDSZ_256; - total_size = 256; - break; - case 0x80: - baseadd_size |= SDRAM_RXBAS_SDSZ_512; - total_size = 512; - break; - default: - printf("DDR-SDRAM: DIMM %d memory queue configuration.\n", - (unsigned int)dimm_num); - printf("ERROR: Unsupported value for the banksize: %d.\n", - (unsigned int)rank_size_id); - printf("Replace the DIMM module with a supported DIMM.\n\n"); - spd_ddr_init_hang (); - } - rank_size_bytes = total_size << 20; - - if ((dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_num == 1)) - bank_0_populated = 1; - - for (i = 0; i < num_ranks; i++) { - mtdcr_any(rank_reg+i+dimm_num+bank_0_populated, - (SDRAM_RXBAS_SDBA_ENCODE(rank_base_addr) | - baseadd_size)); - rank_base_addr += rank_size_bytes; - } - } - } - -#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_460SX) - /* - * Enable high bandwidth access - * This is currently not used, but with this setup - * it is possible to use it later on in e.g. the Linux - * EMAC driver for performance gain. - */ - mtdcr(SDRAM_PLBADDULL, 0x00000000); /* MQ0_BAUL */ - mtdcr(SDRAM_PLBADDUHB, 0x00000008); /* MQ0_BAUH */ - - /* - * Set optimal value for Memory Queue HB/LL Configuration registers - */ - mtdcr(SDRAM_CONF1HB, (mfdcr(SDRAM_CONF1HB) & ~SDRAM_CONF1HB_MASK) | - SDRAM_CONF1HB_AAFR | SDRAM_CONF1HB_RPEN | SDRAM_CONF1HB_RFTE | - SDRAM_CONF1HB_RPLM | SDRAM_CONF1HB_WRCL); - mtdcr(SDRAM_CONF1LL, (mfdcr(SDRAM_CONF1LL) & ~SDRAM_CONF1LL_MASK) | - SDRAM_CONF1LL_AAFR | SDRAM_CONF1LL_RPEN | SDRAM_CONF1LL_RFTE | - SDRAM_CONF1LL_RPLM); - mtdcr(SDRAM_CONFPATHB, mfdcr(SDRAM_CONFPATHB) | SDRAM_CONFPATHB_TPEN); -#endif -} - -#ifdef CONFIG_DDR_ECC -/*-----------------------------------------------------------------------------+ - * program_ecc. - *-----------------------------------------------------------------------------*/ -static void program_ecc(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks, - unsigned long tlb_word2_i_value) -{ - unsigned long dimm_num; - unsigned long ecc; - - ecc = 0; - /* loop through all the DIMM slots on the board */ - for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) { - /* If a dimm is installed in a particular slot ... */ - if (dimm_populated[dimm_num] != SDRAM_NONE) - ecc = max(ecc, - (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 11)); - } - if (ecc == 0) - return; - - do_program_ecc(tlb_word2_i_value); -} -#endif - -#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) -/*-----------------------------------------------------------------------------+ - * program_DQS_calibration. - *-----------------------------------------------------------------------------*/ -static void program_DQS_calibration(unsigned long *dimm_populated, - unsigned char *iic0_dimm_addr, - unsigned long num_dimm_banks) -{ - unsigned long val; - -#ifdef HARD_CODED_DQS /* calibration test with hardvalues */ - mtsdram(SDRAM_RQDC, 0x80000037); - mtsdram(SDRAM_RDCC, 0x40000000); - mtsdram(SDRAM_RFDC, 0x000001DF); - - test(); -#else - /*------------------------------------------------------------------ - * Program RDCC register - * Read sample cycle auto-update enable - *-----------------------------------------------------------------*/ - - mfsdram(SDRAM_RDCC, val); - mtsdram(SDRAM_RDCC, - (val & ~(SDRAM_RDCC_RDSS_MASK | SDRAM_RDCC_RSAE_MASK)) - | SDRAM_RDCC_RSAE_ENABLE); - - /*------------------------------------------------------------------ - * Program RQDC register - * Internal DQS delay mechanism enable - *-----------------------------------------------------------------*/ - mtsdram(SDRAM_RQDC, (SDRAM_RQDC_RQDE_ENABLE|SDRAM_RQDC_RQFD_ENCODE(0x38))); - - /*------------------------------------------------------------------ - * Program RFDC register - * Set Feedback Fractional Oversample - * Auto-detect read sample cycle enable - * Set RFOS to 1/4 of memclk cycle (0x3f) - *-----------------------------------------------------------------*/ - mfsdram(SDRAM_RFDC, val); - mtsdram(SDRAM_RFDC, - (val & ~(SDRAM_RFDC_ARSE_MASK | SDRAM_RFDC_RFOS_MASK | - SDRAM_RFDC_RFFD_MASK)) - | (SDRAM_RFDC_ARSE_ENABLE | SDRAM_RFDC_RFOS_ENCODE(0x3f) | - SDRAM_RFDC_RFFD_ENCODE(0))); - - DQS_calibration_process(); -#endif -} - -static int short_mem_test(void) -{ - u32 *membase; - u32 bxcr_num; - u32 bxcf; - int i; - int j; - phys_size_t base_addr; - u32 test[NUMMEMTESTS][NUMMEMWORDS] = { - {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, - 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF}, - {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, - 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000}, - {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, - 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555}, - {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, - 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA}, - {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, - 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A}, - {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, - 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5}, - {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, - 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA}, - {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, - 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55} }; - int l; - - for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) { - mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf); - - /* Banks enabled */ - if ((bxcf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) { - /* Bank is enabled */ - - /* - * Only run test on accessable memory (below 2GB) - */ - base_addr = SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num)); - if (base_addr >= CONFIG_MAX_MEM_MAPPED) - continue; - - /*------------------------------------------------------------------ - * Run the short memory test. - *-----------------------------------------------------------------*/ - membase = (u32 *)(u32)base_addr; - - for (i = 0; i < NUMMEMTESTS; i++) { - for (j = 0; j < NUMMEMWORDS; j++) { - membase[j] = test[i][j]; - ppcDcbf((u32)&(membase[j])); - } - sync(); - for (l=0; l<NUMLOOPS; l++) { - for (j = 0; j < NUMMEMWORDS; j++) { - if (membase[j] != test[i][j]) { - ppcDcbf((u32)&(membase[j])); - return 0; - } - ppcDcbf((u32)&(membase[j])); - } - sync(); - } - } - } /* if bank enabled */ - } /* for bxcf_num */ - - return 1; -} - -#ifndef HARD_CODED_DQS -/*-----------------------------------------------------------------------------+ - * DQS_calibration_process. - *-----------------------------------------------------------------------------*/ -static void DQS_calibration_process(void) -{ - unsigned long rfdc_reg; - unsigned long rffd; - unsigned long val; - long rffd_average; - long max_start; - unsigned long dlycal; - unsigned long dly_val; - unsigned long max_pass_length; - unsigned long current_pass_length; - unsigned long current_fail_length; - unsigned long current_start; - long max_end; - unsigned char fail_found; - unsigned char pass_found; -#if !defined(CONFIG_DDR_RQDC_FIXED) - int window_found; - u32 rqdc_reg; - u32 rqfd; - u32 rqfd_start; - u32 rqfd_average; - int loopi = 0; - char str[] = "Auto calibration -"; - char slash[] = "\\|/-\\|/-"; - - /*------------------------------------------------------------------ - * Test to determine the best read clock delay tuning bits. - * - * Before the DDR controller can be used, the read clock delay needs to be - * set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD]. - * This value cannot be hardcoded into the program because it changes - * depending on the board's setup and environment. - * To do this, all delay values are tested to see if they - * work or not. By doing this, you get groups of fails with groups of - * passing values. The idea is to find the start and end of a passing - * window and take the center of it to use as the read clock delay. - * - * A failure has to be seen first so that when we hit a pass, we know - * that it is truely the start of the window. If we get passing values - * to start off with, we don't know if we are at the start of the window. - * - * The code assumes that a failure will always be found. - * If a failure is not found, there is no easy way to get the middle - * of the passing window. I guess we can pretty much pick any value - * but some values will be better than others. Since the lowest speed - * we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed), - * from experimentation it is safe to say you will always have a failure. - *-----------------------------------------------------------------*/ - - /* first fix RQDC[RQFD] to an average of 80 degre phase shift to find RFDC[RFFD] */ - rqfd_start = 64; /* test-only: don't know if this is the _best_ start value */ - - puts(str); - -calibration_loop: - mfsdram(SDRAM_RQDC, rqdc_reg); - mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) | - SDRAM_RQDC_RQFD_ENCODE(rqfd_start)); -#else /* CONFIG_DDR_RQDC_FIXED */ - /* - * On Katmai the complete auto-calibration somehow doesn't seem to - * produce the best results, meaning optimal values for RQFD/RFFD. - * This was discovered by GDA using a high bandwidth scope, - * analyzing the DDR2 signals. GDA provided a fixed value for RQFD, - * so now on Katmai "only" RFFD is auto-calibrated. - */ - mtsdram(SDRAM_RQDC, CONFIG_DDR_RQDC_FIXED); -#endif /* CONFIG_DDR_RQDC_FIXED */ - - max_start = 0; - - max_pass_length = 0; - max_start = 0; - max_end = 0; - current_pass_length = 0; - current_fail_length = 0; - current_start = 0; - fail_found = false; - pass_found = false; - - /* - * get the delay line calibration register value - */ - mfsdram(SDRAM_DLCR, dlycal); - dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2; - - for (rffd = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) { - mfsdram(SDRAM_RFDC, rfdc_reg); - rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK); - - /*------------------------------------------------------------------ - * Set the timing reg for the test. - *-----------------------------------------------------------------*/ - mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd)); - - /*------------------------------------------------------------------ - * See if the rffd value passed. - *-----------------------------------------------------------------*/ - if (short_mem_test()) { - if (fail_found == true) { - pass_found = true; - if (current_pass_length == 0) - current_start = rffd; - - current_fail_length = 0; - current_pass_length++; - - if (current_pass_length > max_pass_length) { - max_pass_length = current_pass_length; - max_start = current_start; - max_end = rffd; - } - } - } else { - current_pass_length = 0; - current_fail_length++; - - if (current_fail_length >= (dly_val >> 2)) { - if (fail_found == false) - fail_found = true; - else if (pass_found == true) - break; - } - } - } /* for rffd */ - - /*------------------------------------------------------------------ - * Set the average RFFD value - *-----------------------------------------------------------------*/ - rffd_average = ((max_start + max_end) >> 1); - - if (rffd_average < 0) - rffd_average = 0; - - if (rffd_average > SDRAM_RFDC_RFFD_MAX) - rffd_average = SDRAM_RFDC_RFFD_MAX; - /* now fix RFDC[RFFD] found and find RQDC[RQFD] */ - mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average)); - -#if !defined(CONFIG_DDR_RQDC_FIXED) - max_pass_length = 0; - max_start = 0; - max_end = 0; - current_pass_length = 0; - current_fail_length = 0; - current_start = 0; - window_found = false; - fail_found = false; - pass_found = false; - - for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) { - mfsdram(SDRAM_RQDC, rqdc_reg); - rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK); - - /*------------------------------------------------------------------ - * Set the timing reg for the test. - *-----------------------------------------------------------------*/ - mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd)); - - /*------------------------------------------------------------------ - * See if the rffd value passed. - *-----------------------------------------------------------------*/ - if (short_mem_test()) { - if (fail_found == true) { - pass_found = true; - if (current_pass_length == 0) - current_start = rqfd; - - current_fail_length = 0; - current_pass_length++; - - if (current_pass_length > max_pass_length) { - max_pass_length = current_pass_length; - max_start = current_start; - max_end = rqfd; - } - } - } else { - current_pass_length = 0; - current_fail_length++; - - if (fail_found == false) { - fail_found = true; - } else if (pass_found == true) { - window_found = true; - break; - } - } - } - - rqfd_average = ((max_start + max_end) >> 1); - - /*------------------------------------------------------------------ - * Make sure we found the valid read passing window. Halt if not - *-----------------------------------------------------------------*/ - if (window_found == false) { - if (rqfd_start < SDRAM_RQDC_RQFD_MAX) { - putc('\b'); - putc(slash[loopi++ % 8]); - - /* try again from with a different RQFD start value */ - rqfd_start++; - goto calibration_loop; - } - - printf("\nERROR: Cannot determine a common read delay for the " - "DIMM(s) installed.\n"); - debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__); - ppc4xx_ibm_ddr2_register_dump(); - spd_ddr_init_hang (); - } - - if (rqfd_average < 0) - rqfd_average = 0; - - if (rqfd_average > SDRAM_RQDC_RQFD_MAX) - rqfd_average = SDRAM_RQDC_RQFD_MAX; - - mtsdram(SDRAM_RQDC, - (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) | - SDRAM_RQDC_RQFD_ENCODE(rqfd_average)); - - blank_string(strlen(str)); -#endif /* CONFIG_DDR_RQDC_FIXED */ - - mfsdram(SDRAM_DLCR, val); - debug("%s[%d] DLCR: 0x%08lX\n", __FUNCTION__, __LINE__, val); - mfsdram(SDRAM_RQDC, val); - debug("%s[%d] RQDC: 0x%08lX\n", __FUNCTION__, __LINE__, val); - mfsdram(SDRAM_RFDC, val); - debug("%s[%d] RFDC: 0x%08lX\n", __FUNCTION__, __LINE__, val); - mfsdram(SDRAM_RDCC, val); - debug("%s[%d] RDCC: 0x%08lX\n", __FUNCTION__, __LINE__, val); -} -#else /* calibration test with hardvalues */ -/*-----------------------------------------------------------------------------+ - * DQS_calibration_process. - *-----------------------------------------------------------------------------*/ -static void test(void) -{ - unsigned long dimm_num; - unsigned long ecc_temp; - unsigned long i, j; - unsigned long *membase; - unsigned long bxcf[MAXRANKS]; - unsigned long val; - char window_found; - char begin_found[MAXDIMMS]; - char end_found[MAXDIMMS]; - char search_end[MAXDIMMS]; - unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = { - {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, - 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF}, - {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, - 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000}, - {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, - 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555}, - {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, - 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA}, - {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, - 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A}, - {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, - 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5}, - {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, - 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA}, - {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, - 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55} }; - - /*------------------------------------------------------------------ - * Test to determine the best read clock delay tuning bits. - * - * Before the DDR controller can be used, the read clock delay needs to be - * set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD]. - * This value cannot be hardcoded into the program because it changes - * depending on the board's setup and environment. - * To do this, all delay values are tested to see if they - * work or not. By doing this, you get groups of fails with groups of - * passing values. The idea is to find the start and end of a passing - * window and take the center of it to use as the read clock delay. - * - * A failure has to be seen first so that when we hit a pass, we know - * that it is truely the start of the window. If we get passing values - * to start off with, we don't know if we are at the start of the window. - * - * The code assumes that a failure will always be found. - * If a failure is not found, there is no easy way to get the middle - * of the passing window. I guess we can pretty much pick any value - * but some values will be better than others. Since the lowest speed - * we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed), - * from experimentation it is safe to say you will always have a failure. - *-----------------------------------------------------------------*/ - mfsdram(SDRAM_MCOPT1, ecc_temp); - ecc_temp &= SDRAM_MCOPT1_MCHK_MASK; - mfsdram(SDRAM_MCOPT1, val); - mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) | - SDRAM_MCOPT1_MCHK_NON); - - window_found = false; - begin_found[0] = false; - end_found[0] = false; - search_end[0] = false; - begin_found[1] = false; - end_found[1] = false; - search_end[1] = false; - - for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) { - mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf[bxcr_num]); - - /* Banks enabled */ - if ((bxcf[dimm_num] & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) { - - /* Bank is enabled */ - membase = - (unsigned long*)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+dimm_num))); - - /*------------------------------------------------------------------ - * Run the short memory test. - *-----------------------------------------------------------------*/ - for (i = 0; i < NUMMEMTESTS; i++) { - for (j = 0; j < NUMMEMWORDS; j++) { - membase[j] = test[i][j]; - ppcDcbf((u32)&(membase[j])); - } - sync(); - for (j = 0; j < NUMMEMWORDS; j++) { - if (membase[j] != test[i][j]) { - ppcDcbf((u32)&(membase[j])); - break; - } - ppcDcbf((u32)&(membase[j])); - } - sync(); - if (j < NUMMEMWORDS) - break; - } - - /*------------------------------------------------------------------ - * See if the rffd value passed. - *-----------------------------------------------------------------*/ - if (i < NUMMEMTESTS) { - if ((end_found[dimm_num] == false) && - (search_end[dimm_num] == true)) { - end_found[dimm_num] = true; - } - if ((end_found[0] == true) && - (end_found[1] == true)) - break; - } else { - if (begin_found[dimm_num] == false) { - begin_found[dimm_num] = true; - search_end[dimm_num] = true; - } - } - } else { - begin_found[dimm_num] = true; - end_found[dimm_num] = true; - } - } - - if ((begin_found[0] == true) && (begin_found[1] == true)) - window_found = true; - - /*------------------------------------------------------------------ - * Make sure we found the valid read passing window. Halt if not - *-----------------------------------------------------------------*/ - if (window_found == false) { - printf("ERROR: Cannot determine a common read delay for the " - "DIMM(s) installed.\n"); - spd_ddr_init_hang (); - } - - /*------------------------------------------------------------------ - * Restore the ECC variable to what it originally was - *-----------------------------------------------------------------*/ - mtsdram(SDRAM_MCOPT1, - (ppcMfdcr_sdram(SDRAM_MCOPT1) & ~SDRAM_MCOPT1_MCHK_MASK) - | ecc_temp); -} -#endif /* !HARD_CODED_DQS */ -#endif /* !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) */ - -#else /* CONFIG_SPD_EEPROM */ - -/*----------------------------------------------------------------------------- - * Function: dram_init - * Description: Configures the PPC4xx IBM DDR1/DDR2 SDRAM memory controller. - * The configuration is performed using static, compile- - * time parameters. - * Configures the PPC405EX(r) and PPC460EX/GT - *---------------------------------------------------------------------------*/ -int dram_init(void) -{ - unsigned long val; - -#if defined(CONFIG_440) - mtdcr(SDRAM_R0BAS, CONFIG_SYS_SDRAM_R0BAS); - mtdcr(SDRAM_R1BAS, CONFIG_SYS_SDRAM_R1BAS); - mtdcr(SDRAM_R2BAS, CONFIG_SYS_SDRAM_R2BAS); - mtdcr(SDRAM_R3BAS, CONFIG_SYS_SDRAM_R3BAS); - mtdcr(SDRAM_PLBADDULL, CONFIG_SYS_SDRAM_PLBADDULL); /* MQ0_BAUL */ - mtdcr(SDRAM_PLBADDUHB, CONFIG_SYS_SDRAM_PLBADDUHB); /* MQ0_BAUH */ - mtdcr(SDRAM_CONF1LL, CONFIG_SYS_SDRAM_CONF1LL); - mtdcr(SDRAM_CONF1HB, CONFIG_SYS_SDRAM_CONF1HB); - mtdcr(SDRAM_CONFPATHB, CONFIG_SYS_SDRAM_CONFPATHB); -#endif - - /* Set Memory Bank Configuration Registers */ - - mtsdram(SDRAM_MB0CF, CONFIG_SYS_SDRAM0_MB0CF); - mtsdram(SDRAM_MB1CF, CONFIG_SYS_SDRAM0_MB1CF); - mtsdram(SDRAM_MB2CF, CONFIG_SYS_SDRAM0_MB2CF); - mtsdram(SDRAM_MB3CF, CONFIG_SYS_SDRAM0_MB3CF); - - /* Set Memory Clock Timing Register */ - - mtsdram(SDRAM_CLKTR, CONFIG_SYS_SDRAM0_CLKTR); - - /* Set Refresh Time Register */ - - mtsdram(SDRAM_RTR, CONFIG_SYS_SDRAM0_RTR); - - /* Set SDRAM Timing Registers */ - - mtsdram(SDRAM_SDTR1, CONFIG_SYS_SDRAM0_SDTR1); - mtsdram(SDRAM_SDTR2, CONFIG_SYS_SDRAM0_SDTR2); - mtsdram(SDRAM_SDTR3, CONFIG_SYS_SDRAM0_SDTR3); - - /* Set Mode and Extended Mode Registers */ - - mtsdram(SDRAM_MMODE, CONFIG_SYS_SDRAM0_MMODE); - mtsdram(SDRAM_MEMODE, CONFIG_SYS_SDRAM0_MEMODE); - - /* Set Memory Controller Options 1 Register */ - - mtsdram(SDRAM_MCOPT1, CONFIG_SYS_SDRAM0_MCOPT1); - - /* Set Manual Initialization Control Registers */ - - mtsdram(SDRAM_INITPLR0, CONFIG_SYS_SDRAM0_INITPLR0); - mtsdram(SDRAM_INITPLR1, CONFIG_SYS_SDRAM0_INITPLR1); - mtsdram(SDRAM_INITPLR2, CONFIG_SYS_SDRAM0_INITPLR2); - mtsdram(SDRAM_INITPLR3, CONFIG_SYS_SDRAM0_INITPLR3); - mtsdram(SDRAM_INITPLR4, CONFIG_SYS_SDRAM0_INITPLR4); - mtsdram(SDRAM_INITPLR5, CONFIG_SYS_SDRAM0_INITPLR5); - mtsdram(SDRAM_INITPLR6, CONFIG_SYS_SDRAM0_INITPLR6); - mtsdram(SDRAM_INITPLR7, CONFIG_SYS_SDRAM0_INITPLR7); - mtsdram(SDRAM_INITPLR8, CONFIG_SYS_SDRAM0_INITPLR8); - mtsdram(SDRAM_INITPLR9, CONFIG_SYS_SDRAM0_INITPLR9); - mtsdram(SDRAM_INITPLR10, CONFIG_SYS_SDRAM0_INITPLR10); - mtsdram(SDRAM_INITPLR11, CONFIG_SYS_SDRAM0_INITPLR11); - mtsdram(SDRAM_INITPLR12, CONFIG_SYS_SDRAM0_INITPLR12); - mtsdram(SDRAM_INITPLR13, CONFIG_SYS_SDRAM0_INITPLR13); - mtsdram(SDRAM_INITPLR14, CONFIG_SYS_SDRAM0_INITPLR14); - mtsdram(SDRAM_INITPLR15, CONFIG_SYS_SDRAM0_INITPLR15); - - /* Set On-Die Termination Registers */ - - mtsdram(SDRAM_CODT, CONFIG_SYS_SDRAM0_CODT); - mtsdram(SDRAM_MODT0, CONFIG_SYS_SDRAM0_MODT0); - mtsdram(SDRAM_MODT1, CONFIG_SYS_SDRAM0_MODT1); - - /* Set Write Timing Register */ - - mtsdram(SDRAM_WRDTR, CONFIG_SYS_SDRAM0_WRDTR); - - /* - * Start Initialization by SDRAM0_MCOPT2[SREN] = 0 and - * SDRAM0_MCOPT2[IPTR] = 1 - */ - - mtsdram(SDRAM_MCOPT2, (SDRAM_MCOPT2_SREN_EXIT | - SDRAM_MCOPT2_IPTR_EXECUTE)); - - /* - * Poll SDRAM0_MCSTAT[MIC] for assertion to indicate the - * completion of initialization. - */ - - do { - mfsdram(SDRAM_MCSTAT, val); - } while ((val & SDRAM_MCSTAT_MIC_MASK) != SDRAM_MCSTAT_MIC_COMP); - - /* Set Delay Control Registers */ - - mtsdram(SDRAM_DLCR, CONFIG_SYS_SDRAM0_DLCR); - -#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) - mtsdram(SDRAM_RDCC, CONFIG_SYS_SDRAM0_RDCC); - mtsdram(SDRAM_RQDC, CONFIG_SYS_SDRAM0_RQDC); - mtsdram(SDRAM_RFDC, CONFIG_SYS_SDRAM0_RFDC); -#endif /* !CONFIG_PPC4xx_DDR_AUTOCALIBRATION */ - - /* - * Enable Controller by SDRAM0_MCOPT2[DCEN] = 1: - */ - - mfsdram(SDRAM_MCOPT2, val); - mtsdram(SDRAM_MCOPT2, val | SDRAM_MCOPT2_DCEN_ENABLE); - -#if defined(CONFIG_440) - /* - * Program TLB entries with caches enabled, for best performace - * while auto-calibrating and ECC generation - */ - program_tlb(0, 0, (CONFIG_SYS_MBYTES_SDRAM << 20), 0); -#endif - -#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) - /*------------------------------------------------------------------ - | DQS calibration. - +-----------------------------------------------------------------*/ - DQS_autocalibration(); -#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */ - - /* - * Now complete RDSS configuration as mentioned on page 7 of the AMCC - * PowerPC440SP/SPe DDR2 application note: - * "DDR1/DDR2 Initialization Sequence and Dynamic Tuning" - */ - update_rdcc(); - -#if defined(CONFIG_DDR_ECC) - do_program_ecc(0); -#endif /* defined(CONFIG_DDR_ECC) */ - -#if defined(CONFIG_440) - /* - * Now after initialization (auto-calibration and ECC generation) - * remove the TLB entries with caches enabled and program again with - * desired cache functionality - */ - remove_tlb(0, (CONFIG_SYS_MBYTES_SDRAM << 20)); - program_tlb(0, 0, (CONFIG_SYS_MBYTES_SDRAM << 20), MY_TLB_WORD2_I_ENABLE); -#endif - - ppc4xx_ibm_ddr2_register_dump(); - -#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) - /* - * Clear potential errors resulting from auto-calibration. - * If not done, then we could get an interrupt later on when - * exceptions are enabled. - */ - set_mcsr(get_mcsr()); -#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */ - - gd->ram_size = CONFIG_SYS_MBYTES_SDRAM << 20; - - return 0; -} -#endif /* CONFIG_SPD_EEPROM */ - -#if defined(CONFIG_440) -u32 mfdcr_any(u32 dcr) -{ - u32 val; - - switch (dcr) { - case SDRAM_R0BAS + 0: - val = mfdcr(SDRAM_R0BAS + 0); - break; - case SDRAM_R0BAS + 1: - val = mfdcr(SDRAM_R0BAS + 1); - break; - case SDRAM_R0BAS + 2: - val = mfdcr(SDRAM_R0BAS + 2); - break; - case SDRAM_R0BAS + 3: - val = mfdcr(SDRAM_R0BAS + 3); - break; - default: - printf("DCR %d not defined in case statement!!!\n", dcr); - val = 0; /* just to satisfy the compiler */ - } - - return val; -} - -void mtdcr_any(u32 dcr, u32 val) -{ - switch (dcr) { - case SDRAM_R0BAS + 0: - mtdcr(SDRAM_R0BAS + 0, val); - break; - case SDRAM_R0BAS + 1: - mtdcr(SDRAM_R0BAS + 1, val); - break; - case SDRAM_R0BAS + 2: - mtdcr(SDRAM_R0BAS + 2, val); - break; - case SDRAM_R0BAS + 3: - mtdcr(SDRAM_R0BAS + 3, val); - break; - default: - printf("DCR %d not defined in case statement!!!\n", dcr); - } -} -#endif /* defined(CONFIG_440) */ - -inline void ppc4xx_ibm_ddr2_register_dump(void) -{ -#if defined(DEBUG) - printf("\nPPC4xx IBM DDR2 Register Dump:\n"); - -#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT)) - PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R0BAS); - PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R1BAS); - PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R2BAS); - PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R3BAS); -#endif /* (defined(CONFIG_440SP) || ... */ -#if defined(CONFIG_405EX) - PPC4xx_IBM_DDR2_DUMP_REGISTER(BESR); - PPC4xx_IBM_DDR2_DUMP_REGISTER(BEARL); - PPC4xx_IBM_DDR2_DUMP_REGISTER(BEARH); - PPC4xx_IBM_DDR2_DUMP_REGISTER(WMIRQ); - PPC4xx_IBM_DDR2_DUMP_REGISTER(PLBOPT); - PPC4xx_IBM_DDR2_DUMP_REGISTER(PUABA); -#endif /* defined(CONFIG_405EX) */ - PPC4xx_IBM_DDR2_DUMP_REGISTER(MB0CF); - PPC4xx_IBM_DDR2_DUMP_REGISTER(MB1CF); - PPC4xx_IBM_DDR2_DUMP_REGISTER(MB2CF); - PPC4xx_IBM_DDR2_DUMP_REGISTER(MB3CF); - PPC4xx_IBM_DDR2_DUMP_REGISTER(MCSTAT); - PPC4xx_IBM_DDR2_DUMP_REGISTER(MCOPT1); - PPC4xx_IBM_DDR2_DUMP_REGISTER(MCOPT2); - PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT0); - PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT1); - PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT2); - PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT3); - PPC4xx_IBM_DDR2_DUMP_REGISTER(CODT); -#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT)) - PPC4xx_IBM_DDR2_DUMP_REGISTER(VVPR); - PPC4xx_IBM_DDR2_DUMP_REGISTER(OPARS); - /* - * OPART is only used as a trigger register. - * - * No data is contained in this register, and reading or writing - * to is can cause bad things to happen (hangs). Just skip it and - * report "N/A". - */ - printf("%20s = N/A\n", "SDRAM_OPART"); -#endif /* defined(CONFIG_440SP) || ... */ - PPC4xx_IBM_DDR2_DUMP_REGISTER(RTR); - PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR0); - PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR1); - PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR2); - PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR3); - PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR4); - PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR5); - PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR6); - PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR7); - PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR8); - PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR9); - PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR10); - PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR11); - PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR12); - PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR13); - PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR14); - PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR15); - PPC4xx_IBM_DDR2_DUMP_REGISTER(RQDC); - PPC4xx_IBM_DDR2_DUMP_REGISTER(RFDC); - PPC4xx_IBM_DDR2_DUMP_REGISTER(RDCC); - PPC4xx_IBM_DDR2_DUMP_REGISTER(DLCR); - PPC4xx_IBM_DDR2_DUMP_REGISTER(CLKTR); - PPC4xx_IBM_DDR2_DUMP_REGISTER(WRDTR); - PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR1); - PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR2); - PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR3); - PPC4xx_IBM_DDR2_DUMP_REGISTER(MMODE); - PPC4xx_IBM_DDR2_DUMP_REGISTER(MEMODE); - PPC4xx_IBM_DDR2_DUMP_REGISTER(ECCES); -#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT)) - PPC4xx_IBM_DDR2_DUMP_REGISTER(CID); -#endif /* defined(CONFIG_440SP) || ... */ - PPC4xx_IBM_DDR2_DUMP_REGISTER(RID); - PPC4xx_IBM_DDR2_DUMP_REGISTER(FCSR); - PPC4xx_IBM_DDR2_DUMP_REGISTER(RTSR); -#endif /* defined(DEBUG) */ -} |