summaryrefslogtreecommitdiff
path: root/arch/powerpc/dts/gdsys/mpc8308.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/dts/gdsys/mpc8308.dtsi')
-rw-r--r--arch/powerpc/dts/gdsys/mpc8308.dtsi354
1 files changed, 354 insertions, 0 deletions
diff --git a/arch/powerpc/dts/gdsys/mpc8308.dtsi b/arch/powerpc/dts/gdsys/mpc8308.dtsi
new file mode 100644
index 0000000000..23e7403d91
--- /dev/null
+++ b/arch/powerpc/dts/gdsys/mpc8308.dtsi
@@ -0,0 +1,354 @@
+/*
+ * Basic platform for gdsys mpc8308 based devices
+ *
+ * (C) Copyright 2014
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * based on mpc8308rdb
+ * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/memory/mpc83xx-sdram.h>
+
+/ {
+ compatible = "fsl,mpc8308rdb";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8308@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <16384>;
+ i-cache-size = <16384>;
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ board_lbc: localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xe0005000 0x1000>;
+ interrupts = <77 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ board_soc: immr@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8308-immr", "simple-bus";
+ ranges = <0 0xe0000000 0x00100000>;
+ reg = <0xe0000000 0x00000200>;
+ bus-frequency = <0>;
+
+ wdt@200 {
+ device_type = "watchdog";
+ compatible = "mpc83xx_wdt";
+ reg = <0x200 0x100>;
+ };
+
+ memory@2000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc83xx-mem-controller";
+ reg = <0x2000 0x1000>;
+ device_type = "memory";
+
+ driver_software_override = <DSO_ENABLE>;
+ p_impedance_override = <DSO_P_IMPEDANCE_NOMINAL>;
+ n_impedance_override = <DSO_N_IMPEDANCE_NOMINAL>;
+ odt_termination_value = <ODT_TERMINATION_150_OHM>;
+ ddr_type = <DDR_TYPE_DDR2_1_8_VOLT>;
+
+ clock_adjust = <CLOCK_ADJUST_05>;
+
+ read_to_write = <0>;
+ write_to_read = <0>;
+ read_to_read = <0>;
+ write_to_write = <0>;
+ active_powerdown_exit = <2>;
+ precharge_powerdown_exit = <6>;
+ odt_powerdown_exit = <8>;
+ mode_reg_set_cycle = <2>;
+
+ precharge_to_activate = <2>;
+ activate_to_precharge = <6>;
+ activate_to_readwrite = <2>;
+ mcas_latency = <CASLAT_40>;
+ refresh_recovery = <17>;
+ last_data_to_precharge = <2>;
+ activate_to_activate = <2>;
+ last_write_data_to_read = <2>;
+
+ additive_latency = <0>;
+ mcas_to_preamble_override = <READ_LAT_PLUS_1_2>;
+ write_latency = <3>;
+ read_to_precharge = <2>;
+ write_cmd_to_write_data = <CLOCK_DELAY_1_2>;
+ minimum_cke_pulse_width = <3>;
+ four_activates_window = <5>;
+
+ self_refresh = <SREN_ENABLE>;
+ sdram_type = <TYPE_DDR2>;
+ databus_width = <DATA_BUS_WIDTH_32>;
+
+ force_self_refresh = <MODE_NORMAL>;
+ dll_reset = <DLL_RESET_ENABLE>;
+ dqs_config = <DQS_TRUE>;
+ odt_config = <ODT_ASSERT_READS>;
+ posted_refreshes = <1>;
+
+ refresh_interval = <2084>;
+ precharge_interval = <256>;
+
+ sdmode = <0x0242>;
+ esdmode = <0x0440>;
+
+ ram@0 {
+ reg = <0x0 0x0 0x8000000>;
+ compatible = "nanya,nt5tu64m16hg";
+
+ odt_rd_cfg = <ODT_RD_NEVER>;
+ odt_wr_cfg = <ODT_WR_ONLY_CURRENT>;
+ bank_bits = <3>;
+ row_bits = <13>;
+ col_bits = <10>;
+ };
+ };
+
+ IIC:i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+ };
+
+ IIC2: i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <15 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+ status = "disabled";
+ };
+
+ SPI:spi@7000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl,spi";
+ reg = <0x7000 0x1000>;
+ interrupts = <16 0x8>;
+ interrupt-parent = <&ipic>;
+ mode = "cpu";
+ };
+
+ sdhc@2e000 {
+ compatible = "fsl,esdhc", "fsl,mpc8308-esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
+ sdhci,auto-cmd12;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <133333333>;
+ interrupts = <9 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <133333333>;
+ interrupts = <10 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ gpio0: gpio@c00 {
+ #gpio-cells = <2>;
+ device_type = "gpio";
+ compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
+ reg = <0xc00 0x18>;
+ interrupts = <74 0x8>;
+ interrupt-parent = <&ipic>;
+ gpio-controller;
+ };
+
+ /* IPIC
+ * interrupts cell = <intr #, sense>
+ * sense values match linux IORESOURCE_IRQ_* defines:
+ * sense == 8: Level, low assertion
+ * sense == 2: Edge, high-to-low change
+ */
+ ipic: interrupt-controller@700 {
+ compatible = "fsl,ipic";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x700 0x100>;
+ device_type = "ipic";
+ };
+
+ ipic-msi@7c0 {
+ compatible = "fsl,ipic-msi";
+ reg = <0x7c0 0x40>;
+ msi-available-ranges = <0x0 0x100>;
+ interrupts = < 0x43 0x8
+ 0x4 0x8
+ 0x51 0x8
+ 0x52 0x8
+ 0x56 0x8
+ 0x57 0x8
+ 0x58 0x8
+ 0x59 0x8 >;
+ interrupt-parent = < &ipic >;
+ };
+
+ dma@2c000 {
+ compatible = "fsl,mpc8308-dma", "fsl,mpc5121-dma";
+ reg = <0x2c000 0x1800>;
+ interrupts = <3 0x8
+ 94 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x24000 0x1000>;
+
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar", "fsl,tsec";
+ reg = <0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <32 0x8 33 0x8 34 0x8>;
+ interrupt-parent = <&ipic>;
+ tbi-handle = < &tbi0 >;
+ phy-handle = < &phy1 >;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@0 {
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar", "fsl,tsec";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 0x8 36 0x8 37 0x8>;
+ interrupt-parent = <&ipic>;
+ phy-handle = < &phy2 >;
+ status = "disabled";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+ };
+
+ pci0: pcie@e0009000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe0009000 0x00001000
+ 0xb0000000 0x01000000>;
+ ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
+ bus-range = <0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 1 8
+ 0 0 0 2 &ipic 1 8
+ 0 0 0 3 &ipic 1 8
+ 0 0 0 4 &ipic 1 8>;
+ interrupts = <0x1 0x8>;
+ interrupt-parent = <&ipic>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xa0000000
+ 0x02000000 0 0xa0000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
+};