diff options
Diffstat (limited to 'arch/ppc/cpu/mpc5xx/spi.c')
| -rw-r--r-- | arch/ppc/cpu/mpc5xx/spi.c | 412 |
1 files changed, 0 insertions, 412 deletions
diff --git a/arch/ppc/cpu/mpc5xx/spi.c b/arch/ppc/cpu/mpc5xx/spi.c deleted file mode 100644 index 3ca15ea838..0000000000 --- a/arch/ppc/cpu/mpc5xx/spi.c +++ /dev/null @@ -1,412 +0,0 @@ -/* - * Copyright (c) 2001 Navin Boppuri / Prashant Patel - * <nboppuri@trinetcommunication.com>, - * <pmpatel@trinetcommunication.com> - * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de> - * Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * MPC5xx CPM SPI interface. - * - * Parts of this code are probably not portable and/or specific to - * the board which I used for the tests. Please send fixes/complaints - * to wd@denx.de - * - * Ported to MPC5xx - * Copyright (c) 2003 Denis Peter, MPL AG Switzerland, d.petr@mpl.ch. - */ - -#include <common.h> -#include <mpc5xx.h> -#include <asm/5xx_immap.h> -#include <linux/ctype.h> -#include <malloc.h> -#include <post.h> -#include <net.h> - -#if defined(CONFIG_SPI) - -#undef DEBUG - -#define SPI_EEPROM_WREN 0x06 -#define SPI_EEPROM_RDSR 0x05 -#define SPI_EEPROM_READ 0x03 -#define SPI_EEPROM_WRITE 0x02 - - -#ifdef DEBUG - -#define DPRINT(a) printf a; -/* ----------------------------------------------- - * Helper functions to peek into tx and rx buffers - * ----------------------------------------------- */ -static const char * const hex_digit = "0123456789ABCDEF"; - -static char quickhex (int i) -{ - return hex_digit[i]; -} - -static void memdump (void *pv, int num) -{ - int i; - unsigned char *pc = (unsigned char *) pv; - - for (i = 0; i < num; i++) - printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f)); - printf ("\t"); - for (i = 0; i < num; i++) - printf ("%c", isprint (pc[i]) ? pc[i] : '.'); - printf ("\n"); -} -#else /* !DEBUG */ - -#define DPRINT(a) - -#endif /* DEBUG */ - -/* ------------------- - * Function prototypes - * ------------------- */ -void spi_init (void); - -ssize_t spi_read (uchar *, int, uchar *, int); -ssize_t spi_write (uchar *, int, uchar *, int); -ssize_t spi_xfer (size_t); - - -/* ************************************************************************** - * - * Function: spi_init_f - * - * Description: Init SPI-Controller (ROM part) - * - * return: --- - * - * *********************************************************************** */ - -void spi_init_f (void) -{ - int i; - - volatile immap_t *immr; - volatile qsmcm5xx_t *qsmcm; - - immr = (immap_t *) CONFIG_SYS_IMMR; - qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm; - - qsmcm->qsmcm_qsmcr = 0; /* all accesses enabled */ - qsmcm->qsmcm_qspi_il = 0; /* lowest IRQ */ - - /* -------------------------------------------- - * GPIO or per. Function - * PQSPAR[00] = 0 reserved - * PQSPAR[01] = 1 [0x4000] -> PERI: (SPICS3) - * PQSPAR[02] = 0 [0x0000] -> GPIO - * PQSPAR[03] = 0 [0x0000] -> GPIO - * PQSPAR[04] = 1 [0x0800] -> PERI: (SPICS0) - * PQSPAR[05] = 0 reseved - * PQSPAR[06] = 1 [0x0200] -> PERI: (SPIMOSI) - * PQSPAR[07] = 1 [0x0100] -> PERI: (SPIMISO) - * -------------------------------------------- */ - qsmcm->qsmcm_pqspar = 0x3 | (CONFIG_SYS_SPI_CS_USED << 3); - - /* -------------------------------------------- - * DDRQS[00] = 0 reserved - * DDRQS[01] = 1 [0x0040] -> SPICS3 Output - * DDRQS[02] = 0 [0x0000] -> GPIO Output - * DDRQS[03] = 0 [0x0000] -> GPIO Output - * DDRQS[04] = 1 [0x0008] -> SPICS0 Output - * DDRQS[05] = 1 [0x0004] -> SPICLK Output - * DDRQS[06] = 1 [0x0002] -> SPIMOSI Output - * DDRQS[07] = 0 [0x0001] -> SPIMISO Input - * -------------------------------------------- */ - qsmcm->qsmcm_ddrqs = 0x7E; - /* -------------------------------------------- - * Base state for used SPI CS pins, if base = 0 active must be 1 - * PORTQS[00] = 0 reserved - * PORTQS[01] = 0 reserved - * PORTQS[02] = 0 reserved - * PORTQS[03] = 0 reserved - * PORTQS[04] = 0 [0x0000] RxD2 - * PORTQS[05] = 1 [0x0400] TxD2 - * PORTQS[06] = 0 [0x0000] RxD1 - * PORTQS[07] = 1 [0x0100] TxD1 - * PORTQS[08] = 0 reserved - * PORTQS[09] = 0 [0x0000] -> SPICS3 Base Output - * PORTQS[10] = 0 [0x0000] -> SPICS2 Base Output - * PORTQS[11] = 0 [0x0000] -> SPICS1 Base Output - * PORTQS[12] = 0 [0x0000] -> SPICS0 Base Output - * PORTQS[13] = 0 [0x0004] -> SPICLK Output - * PORTQS[14] = 0 [0x0002] -> SPIMOSI Output - * PORTQS[15] = 0 [0x0001] -> SPIMISO Input - * -------------------------------------------- */ - qsmcm->qsmcm_portqs |= (CONFIG_SYS_SPI_CS_BASE << 3); - /* -------------------------------------------- - * Controll Register 0 - * SPCR0[00] = 1 (0x8000) Master - * SPCR0[01] = 0 (0x0000) Wired-Or - * SPCR0[2..5] = (0x2000) Bits per transfer (default 8) - * SPCR0[06] = 0 (0x0000) Normal polarity - * SPCR0[07] = 0 (0x0000) Normal Clock Phase - * SPCR0[08..15] = 14 1.4MHz - */ - qsmcm->qsmcm_spcr0=0xA00E; - /* -------------------------------------------- - * Controll Register 1 - * SPCR1[00] = 0 (0x0000) QSPI enabled - * SPCR1[1..7] = (0x7F00) Delay before Transfer - * SPCR1[8..15] = (0x0000) Delay After transfer (204.8usec@40MHz) - */ - qsmcm->qsmcm_spcr1=0x7F00; - /* -------------------------------------------- - * Controll Register 2 - * SPCR2[00] = 0 (0x0000) SPI IRQs Disabeld - * SPCR2[01] = 0 (0x0000) No Wrap around - * SPCR2[02] = 0 (0x0000) Wrap to 0 - * SPCR2[3..7] = (0x0000) End Queue pointer = 0 - * SPCR2[8..10] = 0 (0x0000) reserved - * SPCR2[11..15] = 0 (0x0000) NewQueue Address = 0 - */ - qsmcm->qsmcm_spcr2=0x0000; - /* -------------------------------------------- - * Controll Register 3 - * SPCR3[00..04] = 0 (0x0000) reserved - * SPCR3[05] = 0 (0x0000) Feedback disabled - * SPCR3[06] = 0 (0x0000) IRQ on HALTA & MODF disabled - * SPCR3[07] = 0 (0x0000) Not halted - */ - qsmcm->qsmcm_spcr3=0x00; - /* -------------------------------------------- - * SPSR (Controll Register 3) Read only/ reset Flags 08,09,10 - * SPCR3[08] = 1 (0x80) QSPI finished - * SPCR3[09] = 1 (0x40) Mode Fault Flag - * SPCR3[10] = 1 (0x20) HALTA - * SPCR3[11..15] = 0 (0x0000) Last executed command - */ - qsmcm->qsmcm_spsr=0xE0; - /*------------------------------------------- - * Setup RAM - */ - for(i=0;i<32;i++) { - qsmcm->qsmcm_recram[i]=0x0000; - qsmcm->qsmcm_tranram[i]=0x0000; - qsmcm->qsmcm_comdram[i]=0x00; - } - return; -} - -/* ************************************************************************** - * - * Function: spi_init_r - * Dummy, all initializations have been done in spi_init_r - * *********************************************************************** */ -void spi_init_r (void) -{ - return; - -} - -/**************************************************************************** - * Function: spi_write - **************************************************************************** */ -ssize_t short_spi_write (uchar *addr, int alen, uchar *buffer, int len) -{ - int i,dlen; - volatile immap_t *immr; - volatile qsmcm5xx_t *qsmcm; - - immr = (immap_t *) CONFIG_SYS_IMMR; - qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm; - for(i=0;i<32;i++) { - qsmcm->qsmcm_recram[i]=0x0000; - qsmcm->qsmcm_tranram[i]=0x0000; - qsmcm->qsmcm_comdram[i]=0x00; - } - qsmcm->qsmcm_tranram[0] = SPI_EEPROM_WREN; /* write enable */ - spi_xfer(1); - i=0; - qsmcm->qsmcm_tranram[i++] = SPI_EEPROM_WRITE; /* WRITE memory array */ - qsmcm->qsmcm_tranram[i++] = addr[0]; - qsmcm->qsmcm_tranram[i++] = addr[1]; - - for(dlen=0;dlen<len;dlen++) { - qsmcm->qsmcm_tranram[i+dlen] = buffer[dlen]; /* WRITE memory array */ - } - /* transmit it */ - spi_xfer(i+dlen); - /* ignore received data */ - for (i = 0; i < 1000; i++) { - qsmcm->qsmcm_tranram[0] = SPI_EEPROM_RDSR; /* read status */ - qsmcm->qsmcm_tranram[1] = 0; - spi_xfer(2); - if (!(qsmcm->qsmcm_recram[1] & 1)) { - break; - } - udelay(1000); - } - if (i >= 1000) { - printf ("*** spi_write: Time out while writing!\n"); - } - return len; -} - -#define TRANSFER_LEN 16 - -ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len) -{ - int index,i,newlen; - uchar newaddr[2]; - int curraddr; - - curraddr=(addr[alen-2]<<8)+addr[alen-1]; - i=len; - index=0; - do { - newaddr[1]=(curraddr & 0xff); - newaddr[0]=((curraddr>>8) & 0xff); - if(i>TRANSFER_LEN) { - newlen=TRANSFER_LEN; - i-=TRANSFER_LEN; - } - else { - newlen=i; - i=0; - } - short_spi_write (newaddr, 2, &buffer[index], newlen); - index+=newlen; - curraddr+=newlen; - }while(i); - return (len); -} - -/**************************************************************************** - * Function: spi_read - **************************************************************************** */ -ssize_t short_spi_read (uchar *addr, int alen, uchar *buffer, int len) -{ - int i; - volatile immap_t *immr; - volatile qsmcm5xx_t *qsmcm; - - immr = (immap_t *) CONFIG_SYS_IMMR; - qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm; - - for(i=0;i<32;i++) { - qsmcm->qsmcm_recram[i]=0x0000; - qsmcm->qsmcm_tranram[i]=0x0000; - qsmcm->qsmcm_comdram[i]=0x00; - } - i=0; - qsmcm->qsmcm_tranram[i++] = (SPI_EEPROM_READ); /* READ memory array */ - qsmcm->qsmcm_tranram[i++] = addr[0] & 0xff; - qsmcm->qsmcm_tranram[i++] = addr[1] & 0xff; - spi_xfer(3 + len); - for(i=0;i<len;i++) { - *buffer++=(char)qsmcm->qsmcm_recram[i+3]; - } - return len; -} - -ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len) -{ - int index,i,newlen; - uchar newaddr[2]; - int curraddr; - - curraddr=(addr[alen-2]<<8)+addr[alen-1]; - i=len; - index=0; - do { - newaddr[1]=(curraddr & 0xff); - newaddr[0]=((curraddr>>8) & 0xff); - if(i>TRANSFER_LEN) { - newlen=TRANSFER_LEN; - i-=TRANSFER_LEN; - } - else { - newlen=i; - i=0; - } - short_spi_read (newaddr, 2, &buffer[index], newlen); - index+=newlen; - curraddr+=newlen; - }while(i); - return (len); -} - -/**************************************************************************** - * Function: spi_xfer - **************************************************************************** */ -ssize_t spi_xfer (size_t count) -{ - volatile immap_t *immr; - volatile qsmcm5xx_t *qsmcm; - int i; - int tm; - ushort status; - immr = (immap_t *) CONFIG_SYS_IMMR; - qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm; - DPRINT (("*** spi_xfer entered count %d***\n",count)); - - /* Set CS for device */ - for(i=0;i<(count-1);i++) - qsmcm->qsmcm_comdram[i] = 0x80 | CONFIG_SYS_SPI_CS_ACT; /* CS3 is connected to the SPI EEPROM */ - - qsmcm->qsmcm_comdram[i] = CONFIG_SYS_SPI_CS_ACT; /* CS3 is connected to the SPI EEPROM */ - qsmcm->qsmcm_spcr2=((count-1)&0x1F)<<8; - - DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n", count)); - - qsmcm->qsmcm_spsr=0xE0; /* clear all flags */ - - /* start spi transfer */ - DPRINT (("*** spi_xfer: Performing transfer ...\n")); - qsmcm->qsmcm_spcr1 |= 0x8000; /* Start transmit */ - - /* -------------------------------- - * Wait for SPI transmit to get out - * or time out (1 second = 1000 ms) - * -------------------------------- */ - for (tm=0; tm<1000; ++tm) { - status=qsmcm->qsmcm_spcr1; - if((status & 0x8000)==0) - break; - udelay (1000); - } - if (tm >= 1000) { - printf ("*** spi_xfer: Time out while xferring to/from SPI!\n"); - } -#ifdef DEBUG - printf ("\nspi_xfer: txbuf after xfer\n"); - memdump ((void *) qsmcm->qsmcm_tranram, 32); /* dump of txbuf before transmit */ - printf ("spi_xfer: rxbuf after xfer\n"); - memdump ((void *) qsmcm->qsmcm_recram, 32); /* dump of rxbuf after transmit */ - printf ("\nspi_xfer: commbuf after xfer\n"); - memdump ((void *) qsmcm->qsmcm_comdram, 32); /* dump of txbuf before transmit */ - printf ("\n"); -#endif - - return count; -} - -#endif /* CONFIG_SPI */ |