diff options
Diffstat (limited to 'arch/x86')
| -rw-r--r-- | arch/x86/cpu/sc520/Makefile | 58 | ||||
| -rw-r--r-- | arch/x86/cpu/sc520/asm-offsets.c | 45 | ||||
| -rw-r--r-- | arch/x86/cpu/sc520/sc520.c | 66 | ||||
| -rw-r--r-- | arch/x86/cpu/sc520/sc520_car.S | 94 | ||||
| -rw-r--r-- | arch/x86/cpu/sc520/sc520_pci.c | 142 | ||||
| -rw-r--r-- | arch/x86/cpu/sc520/sc520_reset.c | 40 | ||||
| -rw-r--r-- | arch/x86/cpu/sc520/sc520_sdram.c | 479 | ||||
| -rw-r--r-- | arch/x86/cpu/sc520/sc520_ssi.c | 93 | ||||
| -rw-r--r-- | arch/x86/cpu/sc520/sc520_timer.c | 89 | ||||
| -rw-r--r-- | arch/x86/include/asm/arch-sc520/pci.h | 79 | ||||
| -rw-r--r-- | arch/x86/include/asm/arch-sc520/sc520.h | 372 | ||||
| -rw-r--r-- | arch/x86/include/asm/arch-sc520/ssi.h | 34 |
12 files changed, 0 insertions, 1591 deletions
diff --git a/arch/x86/cpu/sc520/Makefile b/arch/x86/cpu/sc520/Makefile deleted file mode 100644 index f462264b8d..0000000000 --- a/arch/x86/cpu/sc520/Makefile +++ /dev/null @@ -1,58 +0,0 @@ -# -# (C) Copyright 2008 -# Graeme Russ, graeme.russ@gmail.com. -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2002 -# Daniel Engström, Omicron Ceti AB, daniel@omicron.se. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB := $(obj)lib$(SOC).o - -COBJS-$(CONFIG_SYS_SC520) += sc520.o -COBJS-$(CONFIG_PCI) += sc520_pci.o -COBJS-$(CONFIG_SYS_SC520_RESET) += sc520_reset.o -COBJS-$(CONFIG_SYS_SC520) += sc520_sdram.o -COBJS-$(CONFIG_SYS_SC520_SSI) += sc520_ssi.o -COBJS-$(CONFIG_SYS_SC520_TIMER) += sc520_timer.o - -SOBJS-$(CONFIG_SYS_SC520) += sc520_car.o - -SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) - -all: $(obj).depend $(LIB) - -$(LIB): $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -#########################################################################
\ No newline at end of file diff --git a/arch/x86/cpu/sc520/asm-offsets.c b/arch/x86/cpu/sc520/asm-offsets.c deleted file mode 100644 index 794f00cdb9..0000000000 --- a/arch/x86/cpu/sc520/asm-offsets.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c - * - * This program is used to generate definitions needed by - * assembly language modules. - * - * We use the technique used in the OSF Mach kernel code: - * generate asm statements containing #defines, - * compile this file to assembler, and then extract the - * #defines from the assembly-language output. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <common.h> -#include <asm/arch/sc520.h> - -#include <linux/kbuild.h> - -int main(void) -{ - DEFINE(GENERATED_GD_RELOC_OFF, offsetof(gd_t, reloc_off)); - - DEFINE(GENERATED_SC520_PAR0, offsetof(struct sc520_mmcr, par[0])); - DEFINE(GENERATED_SC520_PAR1, offsetof(struct sc520_mmcr, par[1])); - DEFINE(GENERATED_SC520_PAR2, offsetof(struct sc520_mmcr, par[2])); - DEFINE(GENERATED_SC520_PAR3, offsetof(struct sc520_mmcr, par[3])); - DEFINE(GENERATED_SC520_PAR4, offsetof(struct sc520_mmcr, par[4])); - DEFINE(GENERATED_SC520_PAR5, offsetof(struct sc520_mmcr, par[5])); - DEFINE(GENERATED_SC520_PAR6, offsetof(struct sc520_mmcr, par[6])); - DEFINE(GENERATED_SC520_PAR7, offsetof(struct sc520_mmcr, par[7])); - DEFINE(GENERATED_SC520_PAR8, offsetof(struct sc520_mmcr, par[8])); - DEFINE(GENERATED_SC520_PAR9, offsetof(struct sc520_mmcr, par[9])); - DEFINE(GENERATED_SC520_PAR10, offsetof(struct sc520_mmcr, par[10])); - DEFINE(GENERATED_SC520_PAR11, offsetof(struct sc520_mmcr, par[11])); - DEFINE(GENERATED_SC520_PAR12, offsetof(struct sc520_mmcr, par[12])); - DEFINE(GENERATED_SC520_PAR13, offsetof(struct sc520_mmcr, par[13])); - DEFINE(GENERATED_SC520_PAR14, offsetof(struct sc520_mmcr, par[14])); - DEFINE(GENERATED_SC520_PAR15, offsetof(struct sc520_mmcr, par[15])); - - return 0; -} diff --git a/arch/x86/cpu/sc520/sc520.c b/arch/x86/cpu/sc520/sc520.c deleted file mode 100644 index 3fe85e7648..0000000000 --- a/arch/x86/cpu/sc520/sc520.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * (C) Copyright 2008-2011 - * Graeme Russ, <graeme.russ@gmail.com> - * - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/processor-flags.h> -#include <asm/arch/sc520.h> - -DECLARE_GLOBAL_DATA_PTR; - -sc520_mmcr_t *sc520_mmcr = (sc520_mmcr_t *)SC520_MMCR_BASE; - -int cpu_init_f(void) -{ - if (CONFIG_SYS_SC520_HIGH_SPEED) { - /* set it to 133 MHz and write back */ - writeb(0x02, &sc520_mmcr->cpuctl); - gd->cpu_clk = 133000000; - } else { - /* set it to 100 MHz and write back */ - writeb(0x01, &sc520_mmcr->cpuctl); - gd->cpu_clk = 100000000; - } - - /* wait at least one millisecond */ - asm("movl $0x2000, %%ecx\n" - "0: pushl %%ecx\n" - "popl %%ecx\n" - "loop 0b\n" : : : "ecx"); - - return x86_cpu_init_f(); -} - -int cpu_init_r(void) -{ - /* Disable the PAR used for CAR */ - writel(0x0000000, &sc520_mmcr->par[2]); - - /* turn on the SDRAM write buffer */ - writeb(0x11, &sc520_mmcr->dbctl); - - return x86_cpu_init_r(); -} diff --git a/arch/x86/cpu/sc520/sc520_car.S b/arch/x86/cpu/sc520/sc520_car.S deleted file mode 100644 index c04cc1f116..0000000000 --- a/arch/x86/cpu/sc520/sc520_car.S +++ /dev/null @@ -1,94 +0,0 @@ -/* - * (C) Copyright 2010-2011 - * Graeme Russ, <graeme.russ@gmail.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <asm/processor-flags.h> -#include <asm/arch/sc520.h> -#include <generated/asm-offsets.h> - -.section .text - -.globl car_init -car_init: - /* - * How to enable Cache-As-RAM for the AMD Elan SC520: - * 1. Turn off the CPU Cache (may not be strictly required) - * 2. Set code execution PAR (usually the BOOTCS region) to be - * non-cachable - * 3. Create a Cachable PAR Region for an area of memory which is - * a) NOT where the code is being executed - * b) NOT SDRAM (Controller not initialised yet) - * c) WILL response to read requests - * The easiest way to do this is to create a second BOOTCS - * PAR mappnig with an address != the PAR in step 2 - * 4. Issue a wbinvd to invalidate the CPU cache - * 5. Turn on the CPU Cache - * 6. Read 16kB from the cached PAR region setup in step 3 - * 7. Turn off the CPU Cache (but DO NOT issue a wbinvd) - * - * The following code uses PAR2 as the cached PAR (PAR0 and PAR1 - * are avoided as these are the only two PARs which can be used - * as PCI BUS Memory regions which the board might require) - * - * The configuration of PAR2 must be set in the board configuration - * file as CONFIG_SYS_SC520_CAR_PAR - */ - - /* Configure Cache-As-RAM PAR */ - movl $CONFIG_SYS_SC520_CAR_PAR, %eax - movl $(SC520_MMCR_BASE + GENERATED_SC520_PAR2), %edi - movl %eax, (%edi) - - /* Trash the cache then turn it on */ - wbinvd - movl %cr0, %eax - andl $~(X86_CR0_NW | X86_CR0_CD), %eax - movl %eax, %cr0 - - /* - * The cache is now enabled and empty. Map a region of memory to - * it by reading that region. - */ - movl $CONFIG_SYS_CAR_ADDR, %esi - movl $CONFIG_SYS_CAR_SIZE, %ecx - shrl $2, %ecx /* we are reading longs */ - cld - rep lodsl - - /* Turn off the cache, but don't trash it */ - movl %cr0, %eax - orl $(X86_CR0_NW | X86_CR0_CD), %eax - movl %eax, %cr0 - - /* Clear the CAR region */ - xorl %eax, %eax - movl $CONFIG_SYS_CAR_ADDR, %edi - movl $CONFIG_SYS_CAR_SIZE, %ecx - shrl $2, %ecx /* we are writing longs */ - rep stosl - - /* - * Done - We should now have CONFIG_SYS_CAR_SIZE bytes of - * Cache-As-RAM - */ - jmp car_init_ret diff --git a/arch/x86/cpu/sc520/sc520_pci.c b/arch/x86/cpu/sc520/sc520_pci.c deleted file mode 100644 index 52d07c119a..0000000000 --- a/arch/x86/cpu/sc520/sc520_pci.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * (C) Copyright 2008-2011 - * Graeme Russ, <graeme.russ@gmail.com> - * - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <pci.h> -#include <asm/io.h> -#include <asm/pci.h> -#include <asm/arch/pci.h> -#include <asm/arch/sc520.h> - -static struct { - u8 priority; - u16 level_reg; - u8 level_bit; -} sc520_irq[] = { - { SC520_IRQ0, 0, 0x01 }, - { SC520_IRQ1, 0, 0x02 }, - { SC520_IRQ2, 1, 0x02 }, - { SC520_IRQ3, 0, 0x08 }, - { SC520_IRQ4, 0, 0x10 }, - { SC520_IRQ5, 0, 0x20 }, - { SC520_IRQ6, 0, 0x40 }, - { SC520_IRQ7, 0, 0x80 }, - - { SC520_IRQ8, 1, 0x01 }, - { SC520_IRQ9, 1, 0x02 }, - { SC520_IRQ10, 1, 0x04 }, - { SC520_IRQ11, 1, 0x08 }, - { SC520_IRQ12, 1, 0x10 }, - { SC520_IRQ13, 1, 0x20 }, - { SC520_IRQ14, 1, 0x40 }, - { SC520_IRQ15, 1, 0x80 } -}; - -/* The interrupt used for PCI INTA-INTD */ -int sc520_pci_ints[15] = { - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1 -}; - -/* utility function to configure a pci interrupt */ -int pci_sc520_set_irq(int pci_pin, int irq) -{ - int i; - u8 tmpb; - u16 tmpw; - - debug("set_irq(): map INT%c to IRQ%d\n", pci_pin + 'A', irq); - - if (irq < 0 || irq > 15) - return -1; /* illegal irq */ - - if (pci_pin < 0 || pci_pin > 15) - return -1; /* illegal pci int pin */ - - /* first disable any non-pci interrupt source that use - * this level */ - - /* PCI interrupt mapping (A through D)*/ - for (i = 0; i <= 3 ; i++) { - tmpb = readb(&sc520_mmcr->pci_int_map[i]); - - if (tmpb == sc520_irq[irq].priority) - writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pci_int_map[i]); - } - - /* GP IRQ interrupt mapping */ - for (i = 0; i <= 10 ; i++) { - tmpb = readb(&sc520_mmcr->gp_int_map[i]); - - if (tmpb == sc520_irq[irq].priority) - writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_int_map[i]); - } - - /* Set the trigger to level */ - tmpb = readb(&sc520_mmcr->pic_mode[sc520_irq[irq].level_reg]); - tmpb |= sc520_irq[irq].level_bit; - writeb(tmpb, &sc520_mmcr->pic_mode[sc520_irq[irq].level_reg]); - - - if (pci_pin < 4) { - /* PCI INTA-INTD */ - /* route the interrupt */ - writeb(sc520_irq[irq].priority, - &sc520_mmcr->pci_int_map[pci_pin]); - } else { - /* GPIRQ0-GPIRQ10 used for additional PCI INTS */ - writeb(sc520_irq[irq].priority, - &sc520_mmcr->gp_int_map[pci_pin - 4]); - - /* also set the polarity in this case */ - tmpw = readw(&sc520_mmcr->intpinpol); - tmpw |= (1 << (pci_pin-4)); - writew(tmpw, &sc520_mmcr->intpinpol); - } - - /* register the pin */ - sc520_pci_ints[pci_pin] = irq; - - - return 0; /* OK */ -} - -void pci_sc520_init(struct pci_controller *hose) -{ - hose->first_busno = 0; - hose->last_busno = 0xff; - hose->region_count = pci_set_regions(hose); - - pci_setup_type1(hose); - - pci_register_hose(hose); - - hose->last_busno = pci_hose_scan(hose); - - /* enable target memory acceses on host brige */ - pci_write_config_word(0, PCI_COMMAND, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); -} diff --git a/arch/x86/cpu/sc520/sc520_reset.c b/arch/x86/cpu/sc520/sc520_reset.c deleted file mode 100644 index 137af978c1..0000000000 --- a/arch/x86/cpu/sc520/sc520_reset.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * (C) Copyright 2011 - * Graeme Russ, <graeme.russ@gmail.com> - * - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sc520.h> - -DECLARE_GLOBAL_DATA_PTR; - -void reset_cpu(ulong addr) -{ - printf("Resetting using SC520 MMCR\n"); - /* Write a '1' to the SYS_RST of the RESCFG MMCR */ - writeb(0x01, &sc520_mmcr->rescfg); - - /* NOTREACHED */ -} diff --git a/arch/x86/cpu/sc520/sc520_sdram.c b/arch/x86/cpu/sc520/sc520_sdram.c deleted file mode 100644 index 9dc13342e3..0000000000 --- a/arch/x86/cpu/sc520/sc520_sdram.c +++ /dev/null @@ -1,479 +0,0 @@ -/* - * (C) Copyright 2010,2011 - * Graeme Russ, <graeme.russ@gmail.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/processor-flags.h> -#include <asm/arch/sc520.h> - -DECLARE_GLOBAL_DATA_PTR; - -struct sc520_sdram_info { - u8 banks; - u8 columns; - u8 rows; - u8 size; -}; - -static void sc520_sizemem(void); -static void sc520_set_dram_timing(void); -static void sc520_set_dram_refresh_rate(void); -static void sc520_enable_dram_refresh(void); -static void sc520_enable_sdram(void); - -int dram_init_f(void) -{ - sc520_sizemem(); - sc520_set_dram_timing(); - sc520_set_dram_refresh_rate(); - sc520_enable_dram_refresh(); - sc520_enable_sdram(); - - return 0; -} - -static inline void sc520_dummy_write(void) -{ - writew(0x0000, CACHELINESZ); -} -static inline void sc520_issue_sdram_op_mode_select(u8 command) -{ - writeb(command, &sc520_mmcr->drcctl); - sc520_dummy_write(); -} - -static inline int check_long(u32 test_long) -{ - u8 i; - u8 tmp_byte = (u8)(test_long & 0x000000ff); - - for (i = 1; i < 4; i++) { - if ((u8)((test_long >> (i * 8)) & 0x000000ff) != tmp_byte) - return -1; - } - - return 0; -} - -static inline int write_and_test(u32 data, u32 address) -{ - writel(data, address); - if (readl(address) == data) - return 0; /* Good */ - else - return -1; /* Bad */ -} - -static void sc520_enable_sdram(void) -{ - u32 par_config; - - /* Enable Writes, Caching and Code Execution to SDRAM */ - par_config = readl(&sc520_mmcr->par[3]); - par_config &= ~(SC520_PAR_EXEC_DIS | - SC520_PAR_CACHE_DIS | - SC520_PAR_WRITE_DIS); - writel(par_config, &sc520_mmcr->par[3]); - - par_config = readl(&sc520_mmcr->par[4]); - par_config &= ~(SC520_PAR_EXEC_DIS | - SC520_PAR_CACHE_DIS | - SC520_PAR_WRITE_DIS); - writel(par_config, &sc520_mmcr->par[4]); -} - -static void sc520_set_dram_timing(void) -{ - u8 drctmctl = 0x00; - -#if defined CONFIG_SYS_SDRAM_DRCTMCTL - /* just have your hardware designer _GIVE_ you what you need here! */ - drctmctl = CONFIG_SYS_SDRAM_DRCTMCTL; -#else - switch (CONFIG_SYS_SDRAM_RAS_CAS_DELAY) { - case 2: - break; - case 3: - drctmctl |= 0x01; - break; - case 4: - default: - drctmctl |= 0x02; - break; - } - - switch (CONFIG_SYS_SDRAM_PRECHARGE_DELAY) { - case 2: - break; - case 3: - drctmctl |= 0x04; - break; - case 4: - default: - drctmctl |= 0x08; - break; - - case 6: - drctmctl |= 0x0c; - break; - } - - switch (CONFIG_SYS_SDRAM_CAS_LATENCY) { - case 2: - break; - case 3: - default: - drctmctl |= 0x10; - break; - } -#endif - writeb(drctmctl, &sc520_mmcr->drctmctl); - - /* Issue load mode register command */ - sc520_issue_sdram_op_mode_select(0x03); -} - -static void sc520_set_dram_refresh_rate(void) -{ - u8 drctl; - - drctl = readb(&sc520_mmcr->drcctl); - drctl &= 0xcf; - - switch (CONFIG_SYS_SDRAM_REFRESH_RATE) { - case 78: - break; - case 156: - default: - drctl |= 0x10; - break; - case 312: - drctl |= 0x20; - break; - case 624: - drctl |= 0x30; - break; - } - - writeb(drctl, &sc520_mmcr->drcctl); -} - -static void sc520_enable_dram_refresh(void) -{ - u8 drctl; - - drctl = readb(&sc520_mmcr->drcctl); - drctl &= 0x30; /* keep refresh rate */ - drctl |= 0x08; /* enable refresh, normal mode */ - - writeb(drctl, &sc520_mmcr->drcctl); -} - -static void sc520_get_bank_info(int bank, struct sc520_sdram_info *bank_info) -{ - u32 col_data; - u32 row_data; - - u32 drcbendadr; - u16 drccfg; - - u8 banks = 0x00; - u8 columns = 0x00; - u8 rows = 0x00; - - bank_info->banks = 0x00; - bank_info->columns = 0x00; - bank_info->rows = 0x00; - bank_info->size = 0x00; - - if ((bank < 0) || (bank > 3)) { - printf("Bad Bank ID\n"); - return; - } - - /* Save configuration */ - drcbendadr = readl(&sc520_mmcr->drcbendadr); - drccfg = readw(&sc520_mmcr->drccfg); - - /* Setup SDRAM Bank to largest possible size */ - writew(0x000b << (bank * 4), &sc520_mmcr->drccfg); - - /* Set ending address for this bank */ - writel(0x000000ff << (bank * 8), &sc520_mmcr->drcbendadr); - - /* write col 11 wrap adr */ - if (write_and_test(COL11_DATA, COL11_ADR) != 0) - goto restore_and_exit; - - /* write col 10 wrap adr */ - if (write_and_test(COL10_DATA, COL10_ADR) != 0) - goto restore_and_exit; - - /* write col 9 wrap adr */ - if (write_and_test(COL09_DATA, COL09_ADR) != 0) - goto restore_and_exit; - - /* write col 8 wrap adr */ - if (write_and_test(COL08_DATA, COL08_ADR) != 0) - goto restore_and_exit; - - col_data = readl(COL11_ADR); - - /* All four bytes in the read long must be the same */ - if (check_long(col_data) < 0) - goto restore_and_exit; - - if ((col_data >= COL08_DATA) && (col_data <= COL11_DATA)) - columns = (u8)(col_data & 0x000000ff); - else - goto restore_and_exit; - - /* write row 14 wrap adr */ - if (write_and_test(ROW14_DATA, ROW14_ADR) != 0) - goto restore_and_exit; - - /* write row 13 wrap adr */ - if (write_and_test(ROW13_DATA, ROW13_ADR) != 0) - goto restore_and_exit; - - /* write row 12 wrap adr */ - if (write_and_test(ROW12_DATA, ROW12_ADR) != 0) - goto restore_and_exit; - - /* write row 11 wrap adr */ - if (write_and_test(ROW11_DATA, ROW11_ADR) != 0) - goto restore_and_exit; - - if (write_and_test(ROW10_DATA, ROW10_ADR) != 0) - goto restore_and_exit; - - /* - * read data @ row 12 wrap adr to determine number of banks, - * and read data @ row 14 wrap adr to determine number of rows. - * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM. - * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4 - * if data @ row 12 wrap == 11 or 12, we have 4 banks, - */ - row_data = readl(ROW12_ADR); - - /* All four bytes in the read long must be the same */ - if (check_long(row_data) != 0) - goto restore_and_exit; - - switch (row_data) { - case ROW10_DATA: - banks = 2; - break; - - case ROW11_DATA: - case ROW12_DATA: - banks = 4; - break; - - default: - goto restore_and_exit; - } - - row_data = readl(ROW14_ADR); - - /* All four bytes in the read long must be the same */ - if (check_long(row_data) != 0) - goto restore_and_exit; - - switch (row_data) { - case ROW11_DATA: - case ROW12_DATA: - case ROW13_DATA: - case ROW14_DATA: - rows = (u8)(row_data & 0x000000ff); - break; - - default: - goto restore_and_exit; - } - - bank_info->banks = banks; - bank_info->columns = columns; - bank_info->rows = rows; - - if ((bank_info->banks != 0) && - (bank_info->columns != 0) && - (bank_info->rows != 0)) { - bank_info->size = bank_info->rows; - bank_info->size >>= (11 - bank_info->columns); - bank_info->size++; - } - -restore_and_exit: - /* Restore configuration */ - writel(drcbendadr, &sc520_mmcr->drcbendadr); - writew(drccfg, &sc520_mmcr->drccfg); -} - -static void sc520_setup_sizemem(void) -{ - u8 i; - - /* Disable write buffer */ - writeb(0x00, &sc520_mmcr->dbctl); - - /* Disable ECC */ - writeb(0x00, &sc520_mmcr->eccctl); - - /* Set slowest SDRAM timing */ - writeb(0x1e, &sc520_mmcr->drctmctl); - - /* Issue a NOP to all SDRAM banks */ - sc520_issue_sdram_op_mode_select(0x01); - - /* Delay for 100 microseconds */ - udelay(100); - - /* Issue 'All Banks Precharge' command */ - sc520_issue_sdram_op_mode_select(0x02); - - /* Issue 2 'Auto Refresh Enable' command */ - sc520_issue_sdram_op_mode_select(0x04); - sc520_dummy_write(); - - /* Issue 'Load Mode Register' command */ - sc520_issue_sdram_op_mode_select(0x03); - - /* Issue 8 more 'Auto Refresh Enable' commands */ - sc520_issue_sdram_op_mode_select(0x04); - for (i = 0; i < 7; i++) - sc520_dummy_write(); - - /* Set control register to 'Normal Mode' */ - writeb(0x00, &sc520_mmcr->drcctl); -} - -static void sc520_sizemem(void) -{ - struct sc520_sdram_info sdram_info[4]; - u8 bank_config = 0x00; - u8 end_addr = 0x00; - u16 drccfg = 0x0000; - u32 drcbendadr = 0x00000000; - u8 i; - - /* Use PARs to disable caching of maximum allowable 256MB SDRAM */ - writel(SC520_SDRAM1_PAR | SC520_PAR_CACHE_DIS, &sc520_mmcr->par[3]); - writel(SC520_SDRAM2_PAR | SC520_PAR_CACHE_DIS, &sc520_mmcr->par[4]); - - sc520_setup_sizemem(); - - gd->ram_size = 0; - - /* Size each SDRAM bank */ - for (i = 0; i <= 3; i++) { - sc520_get_bank_info(i, &sdram_info[i]); - - if (sdram_info[i].banks != 0) { - /* Update Configuration register */ - bank_config = sdram_info[i].columns - 8; - - if (sdram_info[i].banks == 4) - bank_config |= 0x08; - - drccfg |= bank_config << (i * 4); - - /* Update End Address register */ - end_addr += sdram_info[i].size; - drcbendadr |= (end_addr | 0x80) << (i * 8); - - gd->ram_size += sdram_info[i].size << 22; - } - - /* Issue 'All Banks Precharge' command */ - sc520_issue_sdram_op_mode_select(0x02); - - /* Set control register to 'Normal Mode' */ - writeb(0x00, &sc520_mmcr->drcctl); - } - - writel(drcbendadr, &sc520_mmcr->drcbendadr); - writew(drccfg, &sc520_mmcr->drccfg); - - /* Clear PARs preventing caching of SDRAM */ - writel(0x00000000, &sc520_mmcr->par[3]); - writel(0x00000000, &sc520_mmcr->par[4]); -} - -int dram_init(void) -{ - ulong dram_ctrl; - ulong dram_present = 0x00000000; - - /* - * We read-back the configuration of the dram - * controller that the assembly code wrote - */ - dram_ctrl = readl(&sc520_mmcr->drcbendadr); - - gd->bd->bi_dram[0].start = 0; - if (dram_ctrl & 0x80) { - /* bank 0 enabled */ - gd->bd->bi_dram[1].start = (dram_ctrl & 0x7f) << 22; - dram_present = gd->bd->bi_dram[1].start; - gd->bd->bi_dram[0].size = gd->bd->bi_dram[1].start; - } else { - gd->bd->bi_dram[0].size = 0; - gd->bd->bi_dram[1].start = gd->bd->bi_dram[0].start; - } - - if (dram_ctrl & 0x8000) { - /* bank 1 enabled */ - gd->bd->bi_dram[2].start = (dram_ctrl & 0x7f00) << 14; - dram_present = gd->bd->bi_dram[2].start; - gd->bd->bi_dram[1].size = gd->bd->bi_dram[2].start - - gd->bd->bi_dram[1].start; - } else { - gd->bd->bi_dram[1].size = 0; - gd->bd->bi_dram[2].start = gd->bd->bi_dram[1].start; - } - - if (dram_ctrl & 0x800000) { - /* bank 2 enabled */ - gd->bd->bi_dram[3].start = (dram_ctrl & 0x7f0000) << 6; - dram_present = gd->bd->bi_dram[3].start; - gd->bd->bi_dram[2].size = gd->bd->bi_dram[3].start - - gd->bd->bi_dram[2].start; - } else { - gd->bd->bi_dram[2].size = 0; - gd->bd->bi_dram[3].start = gd->bd->bi_dram[2].start; - } - - if (dram_ctrl & 0x80000000) { - /* bank 3 enabled */ - dram_present = (dram_ctrl & 0x7f000000) >> 2; - gd->bd->bi_dram[3].size = dram_present - - gd->bd->bi_dram[3].start; - } else { - gd->bd->bi_dram[3].size = 0; - } - - gd->ram_size = dram_present; - - return 0; -} diff --git a/arch/x86/cpu/sc520/sc520_ssi.c b/arch/x86/cpu/sc520/sc520_ssi.c deleted file mode 100644 index cc601e56e4..0000000000 --- a/arch/x86/cpu/sc520/sc520_ssi.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/ssi.h> -#include <asm/arch/sc520.h> - -int ssi_set_interface(int freq, int lsb_first, int inv_clock, int inv_phase) -{ - u8 temp = 0; - - if (freq >= 8192) - temp |= CTL_CLK_SEL_4; - else if (freq >= 4096) - temp |= CTL_CLK_SEL_8; - else if (freq >= 2048) - temp |= CTL_CLK_SEL_16; - else if (freq >= 1024) - temp |= CTL_CLK_SEL_32; - else if (freq >= 512) - temp |= CTL_CLK_SEL_64; - else if (freq >= 256) - temp |= CTL_CLK_SEL_128; - else if (freq >= 128) - temp |= CTL_CLK_SEL_256; - else - temp |= CTL_CLK_SEL_512; - - if (!lsb_first) - temp |= MSBF_ENB; - - if (inv_clock) - temp |= CLK_INV_ENB; - - if (inv_phase) - temp |= PHS_INV_ENB; - - writeb(temp, &sc520_mmcr->ssictl); - - return 0; -} - -u8 ssi_txrx_byte(u8 data) -{ - writeb(data, &sc520_mmcr->ssixmit); - while (readb(&sc520_mmcr->ssista) & SSISTA_BSY) - ; - writeb(SSICMD_CMD_SEL_XMITRCV, &sc520_mmcr->ssicmd); - while (readb(&sc520_mmcr->ssista) & SSISTA_BSY) - ; - - return readb(&sc520_mmcr->ssircv); -} - -void ssi_tx_byte(u8 data) -{ - writeb(data, &sc520_mmcr->ssixmit); - while (readb(&sc520_mmcr->ssista) & SSISTA_BSY) - ; - writeb(SSICMD_CMD_SEL_XMIT, &sc520_mmcr->ssicmd); -} - -u8 ssi_rx_byte(void) -{ - while (readb(&sc520_mmcr->ssista) & SSISTA_BSY) - ; - writeb(SSICMD_CMD_SEL_RCV, &sc520_mmcr->ssicmd); - while (readb(&sc520_mmcr->ssista) & SSISTA_BSY) - ; - - return readb(&sc520_mmcr->ssircv); -} diff --git a/arch/x86/cpu/sc520/sc520_timer.c b/arch/x86/cpu/sc520/sc520_timer.c deleted file mode 100644 index 41f121f86f..0000000000 --- a/arch/x86/cpu/sc520/sc520_timer.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * (C) Copyright 2008-2011 - * Graeme Russ, <graeme.russ@gmail.com> - * - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/interrupt.h> -#include <asm/arch/sc520.h> - -void sc520_timer_isr(void) -{ - /* Ack the GP Timer Interrupt */ - writeb(0x02, &sc520_mmcr->gptmrsta); -} - -int timer_init(void) -{ - /* Register the SC520 specific timer interrupt handler */ - register_timer_isr(sc520_timer_isr); - - /* Install interrupt handler for GP Timer 1 */ - irq_install_handler (0, timer_isr, NULL); - - /* Map GP Timer 1 to Master PIC IR0 */ - writeb(0x01, &sc520_mmcr->gp_tmr_int_map[1]); - - /* Disable GP Timers 1 & 2 - Allow configuration writes */ - writew(0x4000, &sc520_mmcr->gptmr1ctl); - writew(0x4000, &sc520_mmcr->gptmr2ctl); - - /* Reset GP Timers 1 & 2 */ - writew(0x0000, &sc520_mmcr->gptmr1cnt); - writew(0x0000, &sc520_mmcr->gptmr2cnt); - - /* Setup GP Timer 2 as a 100kHz (10us) prescaler */ - writew(83, &sc520_mmcr->gptmr2maxcmpa); - writew(0xc001, &sc520_mmcr->gptmr2ctl); - - /* Setup GP Timer 1 as a 1000 Hz (1ms) interrupt generator */ - writew(100, &sc520_mmcr->gptmr1maxcmpa); - writew(0xe009, &sc520_mmcr->gptmr1ctl); - - unmask_irq(0); - - /* Clear the GP Timer 1 status register to get the show rolling*/ - writeb(0x02, &sc520_mmcr->gptmrsta); - - return 0; -} - -/* Allow boards to override udelay implementation */ -void __udelay(unsigned long usec) - __attribute__((weak, alias("sc520_udelay"))); - -void sc520_udelay(unsigned long usec) -{ - int m = 0; - long u; - - readw(&sc520_mmcr->swtmrmilli); - readw(&sc520_mmcr->swtmrmicro); - - do { - m += readw(&sc520_mmcr->swtmrmilli); - u = readw(&sc520_mmcr->swtmrmicro) + (m * 1000); - } while (u < usec); -} diff --git a/arch/x86/include/asm/arch-sc520/pci.h b/arch/x86/include/asm/arch-sc520/pci.h deleted file mode 100644 index 12ba656ff0..0000000000 --- a/arch/x86/include/asm/arch-sc520/pci.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _ASM_IC_SC520_PCI_H_ -#define _ASM_IC_SC520_PCI_H_ 1 - -/* bus mapping constants (used for PCI core initialization) */ /* bus mapping constants */ -#define SC520_REG_ADDR 0x00000cf8 -#define SC520_REG_DATA 0x00000cfc - -#define SC520_ISA_MEM_PHYS 0x00000000 -#define SC520_ISA_MEM_BUS 0x00000000 -#define SC520_ISA_MEM_SIZE 0x01000000 - -#define SC520_ISA_IO_PHYS 0x00000000 -#define SC520_ISA_IO_BUS 0x00000000 -#define SC520_ISA_IO_SIZE 0x00001000 - -/* PCI I/O space from 0x1000 to 0xdfff - * (make 0xe000-0xfdff available for stuff like PCCard boot) */ -#define SC520_PCI_IO_PHYS 0x00001000 -#define SC520_PCI_IO_BUS 0x00001000 -#define SC520_PCI_IO_SIZE 0x0000d000 - -/* system memory from 0x00000000 to 0x0fffffff */ -#define SC520_PCI_MEMORY_PHYS 0x00000000 -#define SC520_PCI_MEMORY_BUS 0x00000000 -#define SC520_PCI_MEMORY_SIZE 0x10000000 - -/* PCI bus memory from 0x10000000 to 0x26ffffff - * (make 0x27000000 - 0x27ffffff available for stuff like PCCard boot) */ -#define SC520_PCI_MEM_PHYS 0x10000000 -#define SC520_PCI_MEM_BUS 0x10000000 -#define SC520_PCI_MEM_SIZE 0x17000000 - -/* pin number used for PCI interrupt mappings */ -#define SC520_PCI_INTA 0 -#define SC520_PCI_INTB 1 -#define SC520_PCI_INTC 2 -#define SC520_PCI_INTD 3 -#define SC520_PCI_GPIRQ0 4 -#define SC520_PCI_GPIRQ1 5 -#define SC520_PCI_GPIRQ2 6 -#define SC520_PCI_GPIRQ3 7 -#define SC520_PCI_GPIRQ4 8 -#define SC520_PCI_GPIRQ5 9 -#define SC520_PCI_GPIRQ6 10 -#define SC520_PCI_GPIRQ7 11 -#define SC520_PCI_GPIRQ8 12 -#define SC520_PCI_GPIRQ9 13 -#define SC520_PCI_GPIRQ10 14 - -extern int sc520_pci_ints[]; - -void pci_sc520_init(struct pci_controller *hose); -int pci_set_regions(struct pci_controller *hose); -int pci_sc520_set_irq(int pci_pin, int irq); - -#endif diff --git a/arch/x86/include/asm/arch-sc520/sc520.h b/arch/x86/include/asm/arch-sc520/sc520.h deleted file mode 100644 index 9dc29d39bc..0000000000 --- a/arch/x86/include/asm/arch-sc520/sc520.h +++ /dev/null @@ -1,372 +0,0 @@ -/* - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _ASM_IC_SC520_H_ -#define _ASM_IC_SC520_H_ 1 - -#ifndef __ASSEMBLY__ - -void init_sc520(void); -unsigned long init_sc520_dram(void); -void sc520_udelay(unsigned long usec); - -/* Memory mapped configuration registers */ -typedef struct sc520_mmcr { - u16 revid; /* ElanSC520 microcontroller revision id */ - u8 cpuctl; /* am5x86 CPU control */ - - u8 pad_0x003[0x0d]; - - u8 drcctl; /* SDRAM control */ - u8 pad_0x011[0x01]; - u8 drctmctl; /* SDRAM timing control */ - u8 pad_0x013[0x01]; - u16 drccfg; /* SDRAM bank configuration*/ - u8 pad_0x016[0x02]; - u32 drcbendadr; /* SDRAM bank 0-3 ending address*/ - u8 pad_0x01c[0x04]; - u8 eccctl; /* ECC control */ - u8 eccsta; /* ECC status */ - u8 eccckbpos; /* ECC check bit position */ - u8 ecccktest; /* ECC Check Code Test */ - u32 eccsbadd; /* ECC single-bit error address */ - u32 eccmbadd; /* ECC multi-bit error address */ - - u8 pad_0x02c[0x14]; - - u8 dbctl; /* SDRAM buffer control */ - - u8 pad_0x041[0x0f]; - - u16 bootcsctl; /* /BOOTCS control */ - u8 pad_0x052[0x02]; - u16 romcs1ctl; /* /ROMCS1 control */ - u16 romcs2ctl; /* /ROMCS2 control */ - - u8 pad_0x058[0x08]; - - u16 hbctl; /* host bridge control */ - u16 hbtgtirqctl; /* host bridge target interrupt control */ - u16 hbtgtirqsta; /* host bridge target interrupt status */ - u16 hbmstirqctl; /* host bridge target interrupt control */ - u16 hbmstirqsta; /* host bridge master interrupt status */ - u8 pad_0x06a[0x02]; - u32 mstintadd; /* host bridge master interrupt address */ - - u8 sysarbctl; /* system arbiter control */ - u8 pciarbsta; /* PCI bus arbiter status */ - u16 sysarbmenb; /* system arbiter master enable */ - u32 arbprictl; /* arbiter priority control */ - - u8 pad_0x078[0x08]; - - u8 adddecctl; /* address decode control */ - u8 pad_0x081[0x01]; - u16 wpvsta; /* write-protect violation status */ - u8 pad_0x084[0x04]; - u32 par[16]; /* programmable address regions */ - - u8 pad_0x0c8[0x0b38]; - - u8 gpecho; /* GP echo mode */ - u8 gpcsdw; /* GP chip select data width */ - u16 gpcsqual; /* GP chip select qualification */ - u8 pad_0xc04[0x4]; - u8 gpcsrt; /* GP chip select recovery time */ - u8 gpcspw; /* GP chip select pulse width */ - u8 gpcsoff; /* GP chip select offset */ - u8 gprdw; /* GP read pulse width */ - u8 gprdoff; /* GP read offset */ - u8 gpwrw; /* GP write pulse width */ - u8 gpwroff; /* GP write offset */ - u8 gpalew; /* GP ale pulse width */ - u8 gpaleoff; /* GP ale offset */ - - u8 pad_0xc11[0x0f]; - - u16 piopfs15_0; /* PIO15-PIO0 pin function select */ - u16 piopfs31_16; /* PIO31-PIO16 pin function select */ - u8 cspfs; /* chip select pin function select */ - u8 pad_0xc25[0x01]; - u8 clksel; /* clock select */ - u8 pad_0xc27[0x01]; - u16 dsctl; /* drive strength control */ - u16 piodir15_0; /* PIO15-PIO0 direction */ - u16 piodir31_16; /* PIO31-PIO16 direction */ - u8 pad_0xc2e[0x02]; - u16 piodata15_0 ; /* PIO15-PIO0 data */ - u16 piodata31_16; /* PIO31-PIO16 data */ - u16 pioset15_0; /* PIO15-PIO0 set */ - u16 pioset31_16; /* PIO31-PIO16 set */ - u16 pioclr15_0; /* PIO15-PIO0 clear */ - u16 pioclr31_16; /* PIO31-PIO16 clear */ - - u8 pad_0xc3c[0x24]; - - u16 swtmrmilli; /* software timer millisecond count */ - u16 swtmrmicro; /* software timer microsecond count */ - u8 swtmrcfg; /* software timer configuration */ - - u8 pad_0xc65[0x0b]; - - u8 gptmrsta; /* GP timers status register */ - u8 pad_0xc71; - u16 gptmr0ctl; /* GP timer 0 mode/control */ - u16 gptmr0cnt; /* GP timer 0 count */ - u16 gptmr0maxcmpa; /* GP timer 0 maxcount compare A */ - u16 gptmr0maxcmpb; /* GP timer 0 maxcount compare B */ - u16 gptmr1ctl; /* GP timer 1 mode/control */ - u16 gptmr1cnt; /* GP timer 1 count */ - u16 gptmr1maxcmpa; /* GP timer 1 maxcount compare A */ - u16 gptmr1maxcmpb; /* GP timer 1 maxcount compare B*/ - u16 gptmr2ctl; /* GP timer 2 mode/control */ - u16 gptmr2cnt; /* GP timer 2 count */ - u8 pad_0xc86[0x08]; - u16 gptmr2maxcmpa; /* GP timer 2 maxcount compare A */ - - u8 pad_0xc90[0x20]; - - u16 wdtmrctl; /* watchdog timer control */ - u16 wdtmrcntl; /* watchdog timer count low */ - u16 wdtmrcnth; /* watchdog timer count high */ - - u8 pad_0xcb6[0x0a]; - - u8 uart1ctl; /* UART 1 general control */ - u8 uart1sta; /* UART 1 general status */ - u8 uart1fcrshad; /* UART 1 FIFO control shadow */ - u8 pad_0xcc3[0x01]; - u8 uart2ctl; /* UART 2 general control */ - u8 uart2sta; /* UART 2 general status */ - u8 uart2fcrshad; /* UART 2 FIFO control shadow */ - - u8 pad_0xcc7[0x09]; - - u8 ssictl; /* SSI control */ - u8 ssixmit; /* SSI transmit */ - u8 ssicmd; /* SSI command */ - u8 ssista; /* SSI status */ - u8 ssircv; /* SSI receive */ - - u8 pad_0xcd5[0x2b]; - - u8 picicr; /* interrupt control */ - u8 pad_0xd01[0x01]; - u8 pic_mode[3]; /* PIC interrupt mode */ - u8 pad_0xd05[0x03]; - u16 swint16_1; /* software interrupt 16-1 control */ - u8 swint22_17; /* software interrupt 22-17/NMI control */ - u8 pad_0xd0b[0x05]; - u16 intpinpol; /* interrupt pin polarity */ - u8 pad_0xd12[0x02]; - u16 pcihostmap; /* PCI host bridge interrupt mapping */ - u8 pad_0xd16[0x02]; - u16 eccmap; /* ECC interrupt mapping */ - u8 gp_tmr_int_map[3]; /* GP timer interrupt mapping */ - u8 pad_0xd1d[0x03]; - u8 pit_int_map[3]; /* PIT interrupt mapping */ - u8 pad_0xd23[0x05]; - u8 uart_int_map[2]; /* UART interrupt mapping */ - u8 pad_0xd2a[0x06]; - u8 pci_int_map[4]; /* PCI interrupt mapping (A through D)*/ - u8 pad_0xd34[0x0c]; - u8 dmabcintmap; /* DMA buffer chaining interrupt mapping */ - u8 ssimap; /* SSI interrupt mapping register */ - u8 wdtmap; /* watchdog timer interrupt mapping */ - u8 rtcmap; /* RTC interrupt mapping register */ - u8 wpvmap; /* write-protect interrupt mapping */ - u8 icemap; /* AMDebug JTAG Rx/Tx interrupt mapping */ - u8 ferrmap; /* floating point error interrupt mapping */ - u8 pad_0xd47[0x09]; - u8 gp_int_map[11]; /* GP IRQ interrupt mapping */ - - u8 pad_0xd5b[0x15]; - - u8 sysinfo; /* system board information */ - u8 pad_0xd71[0x01]; - u8 rescfg; /* reset configuration */ - u8 pad_0xd73[0x01]; - u8 ressta; /* reset status */ - - u8 pad_0xd75[0x0b]; - - u8 gpdmactl; /* GP-DMA Control */ - u8 gpdmammio; /* GP-DMA memory-mapped I/O */ - u16 gpdmaextchmapa; /* GP-DMA resource channel map a */ - u16 gpdmaextchmapb; /* GP-DMA resource channel map b */ - u8 gp_dma_ext_pg_0; /* GP-DMA channel extended page 0 */ - u8 gp_dma_ext_pg_1; /* GP-DMA channel extended page 0 */ - u8 gp_dma_ext_pg_2; /* GP-DMA channel extended page 0 */ - u8 gp_dma_ext_pg_3; /* GP-DMA channel extended page 0 */ - u8 gp_dma_ext_pg_5; /* GP-DMA channel extended page 0 */ - u8 gp_dma_ext_pg_6; /* GP-DMA channel extended page 0 */ - u8 gp_dma_ext_pg_7; /* GP-DMA channel extended page 0 */ - u8 pad_0xd8d[0x03]; - u8 gpdmaexttc3; /* GP-DMA channel 3 extender transfer count */ - u8 gpdmaexttc5; /* GP-DMA channel 5 extender transfer count */ - u8 gpdmaexttc6; /* GP-DMA channel 6 extender transfer count */ - u8 gpdmaexttc7; /* GP-DMA channel 7 extender transfer count */ - u8 pad_0xd94[0x4]; - u8 gpdmabcctl; /* buffer chaining control */ - u8 gpdmabcsta; /* buffer chaining status */ - u8 gpdmabsintenb; /* buffer chaining interrupt enable */ - u8 gpdmabcval; /* buffer chaining valid */ - u8 pad_0xd9c[0x04]; - u16 gpdmanxtaddl3; /* GP-DMA channel 3 next address low */ - u16 gpdmanxtaddh3; /* GP-DMA channel 3 next address high */ - u16 gpdmanxtaddl5; /* GP-DMA channel 5 next address low */ - u16 gpdmanxtaddh5; /* GP-DMA channel 5 next address high */ - u16 gpdmanxtaddl6; /* GP-DMA channel 6 next address low */ - u16 gpdmanxtaddh6; /* GP-DMA channel 6 next address high */ - u16 gpdmanxtaddl7; /* GP-DMA channel 7 next address low */ - u16 gpdmanxtaddh7; /* GP-DMA channel 7 next address high */ - u16 gpdmanxttcl3; /* GP-DMA channel 3 next transfer count low */ - u16 gpdmanxttch3; /* GP-DMA channel 3 next transfer count high */ - u16 gpdmanxttcl5; /* GP-DMA channel 5 next transfer count low */ - u16 gpdmanxttch5; /* GP-DMA channel 5 next transfer count high */ - u16 gpdmanxttcl6; /* GP-DMA channel 6 next transfer count low */ - u16 gpdmanxttch6; /* GP-DMA channel 6 next transfer count high */ - u16 gpdmanxttcl7; /* GP-DMA channel 7 next transfer count low */ - u16 gpdmanxttch7; /* GP-DMA channel 7 next transfer count high */ - - u8 pad_0xdc0[0x0240]; -} sc520_mmcr_t; - -extern sc520_mmcr_t *sc520_mmcr; - -#endif - -/* Memory Mapped Control Registers (MMCR) Base Address */ -#define SC520_MMCR_BASE 0xfffef000 - -/* - * PARs for maximum allowable 256MB of SDRAM @ 0x00000000 - * Two PARs are required due to maximum PAR size of 128MB - * These are used in the SDRAM sizing code to disable caching - * - * 111 0 0 0 1 11111111111 00000000000000 }- 0xe3ffc000 - * 111 0 0 0 1 11111111111 00100000000000 }- 0xe3ffc800 - * \ / | | | | \----+----/ \-----+------/ - * | | | | | | +---------- Start at 0x00000000 - * | | | | | | 0x08000000 - * | | | | | +----------------------- 128MB Region Size - * | | | | | ((2047 + 1) * 64kB) - * | | | | +------------------------------ 64kB Page Size - * | | | +-------------------------------- Writes Enabled - * | | +---------------------------------- Caching Enabled - * | +------------------------------------ Execution Enabled - * +--------------------------------------- SDRAM - */ -#define SC520_SDRAM1_PAR 0xe3ffc000 -#define SC520_SDRAM2_PAR 0xe3ffc800 - -#define SC520_PAR_WRITE_DIS 0x04000000 -#define SC520_PAR_CACHE_DIS 0x08000000 -#define SC520_PAR_EXEC_DIS 0x10000000 - -/* - * Programmable Address Regions to cover 256MB SDRAM (Maximum supported) - * required for DRAM sizing code - */ - -/* MMCR Register bits (not all of them :) ) */ - -/* SSI Stuff */ -#define CTL_CLK_SEL_4 0x00 /* Nominal Bit Rate = 8 MHz */ -#define CTL_CLK_SEL_8 0x10 /* Nominal Bit Rate = 4 MHz */ -#define CTL_CLK_SEL_16 0x20 /* Nominal Bit Rate = 2 MHz */ -#define CTL_CLK_SEL_32 0x30 /* Nominal Bit Rate = 1 MHz */ -#define CTL_CLK_SEL_64 0x40 /* Nominal Bit Rate = 512 KHz */ -#define CTL_CLK_SEL_128 0x50 /* Nominal Bit Rate = 256 KHz */ -#define CTL_CLK_SEL_256 0x60 /* Nominal Bit Rate = 128 KHz */ -#define CTL_CLK_SEL_512 0x70 /* Nominal Bit Rate = 64 KHz */ - -#define TC_INT_ENB 0x08 /* Transaction Complete Interrupt Enable */ -#define PHS_INV_ENB 0x04 /* SSI Inverted Phase Mode Enable */ -#define CLK_INV_ENB 0x02 /* SSI Inverted Clock Mode Enable */ -#define MSBF_ENB 0x01 /* SSI Most Significant Bit First Mode Enable */ - -#define SSICMD_CMD_SEL_XMITRCV 0x03 /* Simultaneous Transmit / Receive Transaction */ -#define SSICMD_CMD_SEL_RCV 0x02 /* Receive Transaction */ -#define SSICMD_CMD_SEL_XMIT 0x01 /* Transmit Transaction */ -#define SSISTA_BSY 0x02 /* SSI Busy */ -#define SSISTA_TC_INT 0x01 /* SSI Transaction Complete Interrupt */ - -/* BITS for SC520_ADDDECCTL: */ -#define WPV_INT_ENB 0x80 /* Write-Protect Violation Interrupt Enable */ -#define IO_HOLE_DEST_PCI 0x10 /* I/O Hole Access Destination */ -#define RTC_DIS 0x04 /* RTC Disable */ -#define UART2_DIS 0x02 /* UART2 Disable */ -#define UART1_DIS 0x01 /* UART1 Disable */ - -/* - * Defines used for SDRAM Sizing (number of columns and rows) - * Refer to section 10.6.4 - SDRAM Sizing Algorithm in the - * Elan SC520 Microcontroller User's Manual (Order #22004B) - */ -#define CACHELINESZ 0x00000010 - -#define COL11_ADR 0x0e001e00 -#define COL10_ADR 0x0e000e00 -#define COL09_ADR 0x0e000600 -#define COL08_ADR 0x0e000200 -#define COL11_DATA 0x0b0b0b0b -#define COL10_DATA 0x0a0a0a0a -#define COL09_DATA 0x09090909 -#define COL08_DATA 0x08080808 - -#define ROW14_ADR 0x0f000000 -#define ROW13_ADR 0x07000000 -#define ROW12_ADR 0x03000000 -#define ROW11_ADR 0x01000000 -#define ROW10_ADR 0x00000000 -#define ROW14_DATA 0x3f3f3f3f -#define ROW13_DATA 0x1f1f1f1f -#define ROW12_DATA 0x0f0f0f0f -#define ROW11_DATA 0x07070707 -#define ROW10_DATA 0xaaaaaaaa - -/* 0x28000000 - 0x3fffffff is used by the flash banks */ - -/* 0x40000000 - 0xffffffff is not adressable by the SC520 */ - -/* priority numbers used for interrupt channel mappings */ -#define SC520_IRQ_DISABLED 0 -#define SC520_IRQ0 1 -#define SC520_IRQ1 2 -#define SC520_IRQ2 4 /* same as IRQ9 */ -#define SC520_IRQ3 11 -#define SC520_IRQ4 12 -#define SC520_IRQ5 13 -#define SC520_IRQ6 21 -#define SC520_IRQ7 22 -#define SC520_IRQ8 3 -#define SC520_IRQ9 4 -#define SC520_IRQ10 5 -#define SC520_IRQ11 6 -#define SC520_IRQ12 7 -#define SC520_IRQ13 8 -#define SC520_IRQ14 9 -#define SC520_IRQ15 10 - -#endif diff --git a/arch/x86/include/asm/arch-sc520/ssi.h b/arch/x86/include/asm/arch-sc520/ssi.h deleted file mode 100644 index bd48eab161..0000000000 --- a/arch/x86/include/asm/arch-sc520/ssi.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * (C) Copyright 2008 - * Graeme Russ <graeme.russ@gmail.com>. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _ASM_IC_SSI_H_ -#define _ASM_IC_SSI_H_ 1 - -int ssi_set_interface(int, int, int, int); -void ssi_chip_select(int); -u8 ssi_txrx_byte(u8); -void ssi_tx_byte(u8); -u8 ssi_rx_byte(void); - - -#endif |