diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/Kconfig | 13 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/Kconfig | 1 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 34 | ||||
| -rw-r--r-- | arch/arm/dts/Makefile | 3 | ||||
| -rw-r--r-- | arch/arm/dts/fsl-ls1012a-frwy.dts | 43 |
5 files changed, 59 insertions, 35 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index dde422bc5d..22234cde2a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1034,6 +1034,19 @@ config TARGET_LS1012A2G5RDB development platform that supports the QorIQ LS1012A Layerscape Architecture processor. +config TARGET_LS1012AFRWY + bool "Support ls1012afrwy" + select ARCH_LS1012A + select BOARD_LATE_INIT + select ARM64 + imply SCSI + imply SCSI_AHCI + help + Support for Freescale LS1012AFRWY platform. + The LS1012A FRWY board (FRWY) is a high-performance + development platform that supports the QorIQ LS1012A + Layerscape Architecture processor. + config TARGET_LS1012AFRDM bool "Support ls1012afrdm" select ARCH_LS1012A diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig index 3a0e129d2e..22d2f29548 100644 --- a/arch/arm/cpu/armv8/Kconfig +++ b/arch/arm/cpu/armv8/Kconfig @@ -91,6 +91,7 @@ config PSCI_RESET !TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \ !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \ !TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \ + !TARGET_LS1012AFRWY && \ !TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \ !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \ !TARGET_LS2081ARDB && \ diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 546de33b72..f2111fadc0 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -261,40 +261,6 @@ config SYS_LS_PPA_FW_IN_NAND endchoice -config SYS_LS_PPA_FW_ADDR - hex "Address of PPA firmware loading from" - depends on FSL_LS_PPA - default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A - default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT - default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A - default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A - default 0x60400000 if SYS_LS_PPA_FW_IN_XIP - default 0x400000 if SYS_LS_PPA_FW_IN_MMC - default 0x400000 if SYS_LS_PPA_FW_IN_NAND - - help - If the PPA firmware locate at XIP flash, such as NOR or - QSPI flash, this address is a directly memory-mapped. - If it is in a serial accessed flash, such as NAND and SD - card, it is a byte offset. - -config SYS_LS_PPA_ESBC_ADDR - hex "hdr address of PPA firmware loading from" - depends on FSL_LS_PPA && CHAIN_OF_TRUST - default 0x60680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A - default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A - default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A - default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A - default 0x580680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A - default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A - default 0x680000 if SYS_LS_PPA_FW_IN_MMC - default 0x680000 if SYS_LS_PPA_FW_IN_NAND - help - If the PPA header firmware locate at XIP flash, such as NOR or - QSPI flash, this address is a directly memory-mapped. - If it is in a serial accessed flash, such as NAND and SD - card, it is a byte offset. - config LS_PPA_ESBC_HDR_SIZE hex "Length of PPA ESBC header" depends on FSL_LS_PPA && CHAIN_OF_TRUST && !SYS_LS_PPA_FW_IN_XIP diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 3dcd6dd7a8..078c21b401 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -229,7 +229,8 @@ dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \ fsl-ls1012a-qds.dtb \ fsl-ls1012a-rdb.dtb \ fsl-ls1012a-2g5rdb.dtb \ - fsl-ls1012a-frdm.dtb + fsl-ls1012a-frdm.dtb \ + fsl-ls1012a-frwy.dtb dtb-$(CONFIG_TARGET_DRAGONBOARD410C) += dragonboard410c.dtb dtb-$(CONFIG_TARGET_DRAGONBOARD820C) += dragonboard820c.dtb diff --git a/arch/arm/dts/fsl-ls1012a-frwy.dts b/arch/arm/dts/fsl-ls1012a-frwy.dts new file mode 100644 index 0000000000..a56909ab92 --- /dev/null +++ b/arch/arm/dts/fsl-ls1012a-frwy.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP ls1012a FRWY board device tree source + * + * Copyright 2018 NXP + * + */ + +/dts-v1/; +#include "fsl-ls1012a.dtsi" + +/ { + model = "FRWY-LS1012A Board"; + + aliases { + spi0 = &qspi; + }; + + chosen { + stdout-path = &duart0; + }; +}; + +&qspi { + bus-num = <0>; + status = "okay"; + + qflash0: w25q16dw@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&duart0 { + status = "okay"; +}; |