diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/dts/at91sam9g45-gurnard.dts | 157 | ||||
| -rw-r--r-- | arch/arm/mach-at91/Kconfig | 9 |
2 files changed, 166 insertions, 0 deletions
diff --git a/arch/arm/dts/at91sam9g45-gurnard.dts b/arch/arm/dts/at91sam9g45-gurnard.dts new file mode 100644 index 0000000000..75c1e99274 --- /dev/null +++ b/arch/arm/dts/at91sam9g45-gurnard.dts @@ -0,0 +1,157 @@ +/* + * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ +/dts-v1/; +#include "at91sam9g45.dtsi" + +/ { + model = "Bluewater Systems Gurnard"; + compatible = "atmel,at91sam9g45", "atmel,at91sam9"; + + chosen { + bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x20000000 0x8000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; + }; + + ahb { + u-boot,dm-pre-reloc; + + fb@0x00500000 { + u-boot,dm-pre-reloc; + status = "okay"; + display-timings { + rev1 { + clock-frequency = <4166666>; + hactive = <480>; + vactive = <272>; + hfront-porch = <1>; + hback-porch = <1>; + hsync-len = <1>; + vback-porch = <4>; + vfront-porch = <2>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + }; + + rev2 { + clock-frequency = <4166666>; + hactive = <480>; + vactive = <272>; + hfront-porch = <2>; + hback-porch = <2>; + hsync-len = <10>; + vback-porch = <2>; + vfront-porch = <2>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + }; + + apb { + pinctrl@fffff400 { + board { + pinctrl_pck0_as_mck: pck0_as_mck { + atmel,pins = + <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC1 periph B */ + }; + + }; + + mmc0_slot1 { + pinctrl_board_mmc0_slot1: mmc0_slot1-board { + atmel,pins = + <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC9 gpio CD pin pull up and deglitch */ + }; + }; + }; + + dbgu: serial@ffffee00 { + status = "okay"; + }; + + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + }; + + mmc0: mmc@fff80000 { + pinctrl-0 = < + &pinctrl_board_mmc0_slot1 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@1 { + reg = <1>; + bus-width = <4>; + cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>; + }; + }; + + ssc0: ssc@fff9c000 { + status = "okay"; + pinctrl-0 = <&pinctrl_ssc0_tx>; + }; + + spi0: spi@fffa4000 { + cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <50000000>; + reg = <1>; + }; + }; + + shdwc@fffffd10 { + atmel,wakeup-counter = <10>; + atmel,wakeup-rtt-timer; + }; + + rtc@fffffd20 { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; + status = "okay"; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + + gpbr: syscon@fffffd60 { + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hardware"; + nand-on-flash-bbt; + status = "okay"; + }; + + usb1: ehci@00800000 { + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + }; + +}; diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 73a9c74512..6180699fed 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -23,6 +23,14 @@ config TARGET_SNAPPER9260 select DM_SERIAL select DM_GPIO +config TARGET_GURNARD + bool "Support gurnard" + select CPU_ARM926EJS + select DM + select DM_SERIAL + select DM_GPIO + select DM_ETH + config TARGET_AT91SAM9261EK bool "Atmel at91sam9261 reference board" select CPU_ARM926EJS @@ -149,6 +157,7 @@ source "board/atmel/sama5d3_xplained/Kconfig" source "board/atmel/sama5d3xek/Kconfig" source "board/atmel/sama5d4_xplained/Kconfig" source "board/atmel/sama5d4ek/Kconfig" +source "board/bluewater/gurnard/Kconfig" source "board/bluewater/snapper9260/Kconfig" source "board/calao/usb_a9263/Kconfig" source "board/denx/ma5d4evk/Kconfig" |