summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/cpu/arm926ejs/mxs/mxs.c4
-rw-r--r--arch/arm/cpu/armv7/mx6/clock.c42
-rw-r--r--arch/arm/cpu/armv7/mx6/ddr.c10
-rw-r--r--arch/arm/cpu/armv7/mx6/soc.c26
-rw-r--r--arch/arm/cpu/armv7/mx7/soc.c8
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/cpu.c12
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch329
-rw-r--r--arch/arm/dts/fsl-ls2080a-qds.dts14
-rw-r--r--arch/arm/dts/fsl-ls2080a.dtsi10
-rw-r--r--arch/arm/imx-common/hab.c53
-rw-r--r--arch/arm/imx-common/init.c5
-rw-r--r--arch/arm/imx-common/iomux-v3.c2
-rw-r--r--arch/arm/imx-common/sata.c2
-rw-r--r--arch/arm/imx-common/timer.c11
-rw-r--r--arch/arm/include/asm/arch-fsl-layerscape/cpu.h4
-rw-r--r--arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h4
-rw-r--r--arch/arm/include/asm/imx-common/sys_proto.h8
-rw-r--r--arch/x86/cpu/cpu.c5
-rw-r--r--arch/x86/dts/bayleybay.dts22
-rw-r--r--arch/x86/dts/conga-qeval20-qa3-e3845.dts18
-rw-r--r--arch/x86/dts/minnowmax.dts18
-rw-r--r--arch/x86/lib/acpi_table.c12
22 files changed, 230 insertions, 89 deletions
diff --git a/arch/arm/cpu/arm926ejs/mxs/mxs.c b/arch/arm/cpu/arm926ejs/mxs/mxs.c
index a6af0fcb36..229862079a 100644
--- a/arch/arm/cpu/arm926ejs/mxs/mxs.c
+++ b/arch/arm/cpu/arm926ejs/mxs/mxs.c
@@ -167,9 +167,9 @@ const char *get_imx_type(u32 imxtype)
{
switch (imxtype) {
case MXC_CPU_MX23:
- return "23"; /* Quad-Plus version of the mx6 */
+ return "23";
case MXC_CPU_MX28:
- return "28"; /* Dual-Plus version of the mx6 */
+ return "28";
default:
return "??";
}
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index e6f227548a..ff932aa7ed 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -97,7 +97,7 @@ void enable_enet_clk(unsigned char enable)
{
u32 mask, *addr;
- if (is_cpu_type(MXC_CPU_MX6UL)) {
+ if (is_mx6ul()) {
mask = MXC_CCM_CCGR3_ENET_MASK;
addr = &imx_ccm->CCGR3;
} else {
@@ -117,7 +117,7 @@ void enable_uart_clk(unsigned char enable)
{
u32 mask;
- if (is_cpu_type(MXC_CPU_MX6UL))
+ if (is_mx6ul())
mask = MXC_CCM_CCGR5_UART_MASK;
else
mask = MXC_CCM_CCGR5_UART_MASK | MXC_CCM_CCGR5_UART_SERIAL_MASK;
@@ -168,7 +168,7 @@ int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
reg &= ~mask;
__raw_writel(reg, &imx_ccm->CCGR2);
} else {
- if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) {
+ if (is_mx6sx() || is_mx6ul()) {
mask = MXC_CCM_CCGR6_I2C4_MASK;
addr = &imx_ccm->CCGR6;
} else {
@@ -279,7 +279,7 @@ static u32 mxc_get_pll_pfd(enum pll_clocks pll, int pfd_num)
switch (pll) {
case PLL_BUS:
- if (!is_cpu_type(MXC_CPU_MX6UL)) {
+ if (!is_mx6ul()) {
if (pfd_num == 3) {
/* No PFD3 on PPL2 */
return 0;
@@ -379,8 +379,8 @@ static u32 get_ipg_per_clk(void)
u32 reg, perclk_podf;
reg = __raw_readl(&imx_ccm->cscmr1);
- if (is_cpu_type(MXC_CPU_MX6SL) || is_cpu_type(MXC_CPU_MX6SX) ||
- is_mx6dqp() || is_cpu_type(MXC_CPU_MX6UL)) {
+ if (is_mx6sl() || is_mx6sx() ||
+ is_mx6dqp() || is_mx6ul()) {
if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK)
return MXC_HCLK; /* OSC 24Mhz */
}
@@ -396,8 +396,7 @@ static u32 get_uart_clk(void)
u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */
reg = __raw_readl(&imx_ccm->cscdr1);
- if (is_cpu_type(MXC_CPU_MX6SL) || is_cpu_type(MXC_CPU_MX6SX) ||
- is_mx6dqp() || is_cpu_type(MXC_CPU_MX6UL)) {
+ if (is_mx6sl() || is_mx6sx() || is_mx6dqp() || is_mx6ul()) {
if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
freq = MXC_HCLK;
}
@@ -416,8 +415,7 @@ static u32 get_cspi_clk(void)
cspi_podf = (reg & MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK) >>
MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
- if (is_mx6dqp() || is_cpu_type(MXC_CPU_MX6SL) ||
- is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) {
+ if (is_mx6dqp() || is_mx6sl() || is_mx6sx() || is_mx6ul()) {
if (reg & MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK)
return MXC_HCLK / (cspi_podf + 1);
}
@@ -479,14 +477,13 @@ static u32 get_mmdc_ch0_clk(void)
u32 freq, podf, per2_clk2_podf, pmu_misc2_audio_div;
- if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL) ||
- is_cpu_type(MXC_CPU_MX6SL)) {
+ if (is_mx6sx() || is_mx6ul() || is_mx6sl()) {
podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) >>
MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET;
if (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK_SEL) {
per2_clk2_podf = (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_MASK) >>
MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_OFFSET;
- if (is_cpu_type(MXC_CPU_MX6SL)) {
+ if (is_mx6sl()) {
if (cbcmr & MXC_CCM_CBCMR_PERIPH2_CLK2_SEL)
freq = MXC_HCLK;
else
@@ -618,7 +615,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq)
debug("mxs_set_lcdclk, freq = %dKHz\n", freq);
- if ((!is_cpu_type(MXC_CPU_MX6SX)) && !is_cpu_type(MXC_CPU_MX6UL)) {
+ if (!is_mx6sx() && !is_mx6ul()) {
debug("This chip not support lcd!\n");
return;
}
@@ -630,7 +627,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq)
return;
}
- if (is_cpu_type(MXC_CPU_MX6SX)) {
+ if (is_mx6sx()) {
reg = readl(&imx_ccm->cscdr2);
/* Can't change clocks when clock not from pre-mux */
if ((reg & MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK) != 0)
@@ -711,7 +708,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq)
MXC_CCM_CBCMR_LCDIF1_PODF_MASK,
((postd - 1) <<
MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET));
- } else if (is_cpu_type(MXC_CPU_MX6SX)) {
+ } else if (is_mx6sx()) {
/* Setting LCDIF2 for i.MX6SX */
if (enable_pll_video(pll_div, pll_num, pll_denom, post_div))
return;
@@ -737,7 +734,7 @@ int enable_lcdif_clock(u32 base_addr)
u32 reg = 0;
u32 lcdif_clk_sel_mask, lcdif_ccgr3_mask;
- if (is_cpu_type(MXC_CPU_MX6SX)) {
+ if (is_mx6sx()) {
if ((base_addr != LCDIF1_BASE_ADDR) &&
(base_addr != LCDIF2_BASE_ADDR)) {
puts("Wrong LCD interface!\n");
@@ -752,7 +749,7 @@ int enable_lcdif_clock(u32 base_addr)
MXC_CCM_CCGR3_DISP_AXI_MASK) :
(MXC_CCM_CCGR3_LCDIF1_PIX_MASK |
MXC_CCM_CCGR3_DISP_AXI_MASK);
- } else if (is_cpu_type(MXC_CPU_MX6UL)) {
+ } else if (is_mx6ul()) {
if (base_addr != LCDIF1_BASE_ADDR) {
puts("Wrong LCD interface!\n");
return -EINVAL;
@@ -850,8 +847,7 @@ int enable_fec_anatop_clock(int fec_id, enum enet_freq freq)
reg |= BF_ANADIG_PLL_ENET_DIV_SELECT(freq);
} else if (fec_id == 1) {
/* Only i.MX6SX/UL support ENET2 */
- if (!(is_cpu_type(MXC_CPU_MX6SX) ||
- is_cpu_type(MXC_CPU_MX6UL)))
+ if (!(is_mx6sx() || is_mx6ul()))
return -EINVAL;
reg &= ~BM_ANADIG_PLL_ENET2_DIV_SELECT;
reg |= BF_ANADIG_PLL_ENET2_DIV_SELECT(freq);
@@ -1044,7 +1040,7 @@ int enable_pcie_clock(void)
#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF 0xa
#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF 0xb
- if (is_cpu_type(MXC_CPU_MX6SX))
+ if (is_mx6sx())
lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF;
else
lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF;
@@ -1228,7 +1224,7 @@ static void disable_ldb_di_clock_sources(void)
/* Make sure PFDs are disabled at boot. */
reg = readl(&mxc_ccm->analog_pfd_528);
/* Cannot disable pll2_pfd2_396M, as it is the MMDC clock in iMX6DL */
- if (is_cpu_type(MXC_CPU_MX6DL))
+ if (is_mx6sdl())
reg |= 0x80008080;
else
reg |= 0x80808080;
@@ -1251,7 +1247,7 @@ static void enable_ldb_di_clock_sources(void)
int reg;
reg = readl(&mxc_ccm->analog_pfd_528);
- if (is_cpu_type(MXC_CPU_MX6DL))
+ if (is_mx6sdl())
reg &= ~(0x80008080);
else
reg &= ~(0x80808080);
diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c
index 1e7ae28933..f151eec545 100644
--- a/arch/arm/cpu/armv7/mx6/ddr.c
+++ b/arch/arm/cpu/armv7/mx6/ddr.c
@@ -888,8 +888,7 @@ void mx6sdl_dram_iocfg(unsigned width,
#define MR(val, ba, cmd, cs1) \
((val << 16) | (1 << 15) | (cmd << 4) | (cs1 << 3) | ba)
#define MMDC1(entry, value) do { \
- if (!is_cpu_type(MXC_CPU_MX6SX) && !is_cpu_type(MXC_CPU_MX6UL) && \
- !is_cpu_type(MXC_CPU_MX6SL)) \
+ if (!is_mx6sx() && !is_mx6ul() && !is_mx6sl()) \
mmdc1->entry = value; \
} while (0)
@@ -1197,12 +1196,11 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo,
u16 mem_speed = ddr3_cfg->mem_speed;
mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
- if (!is_cpu_type(MXC_CPU_MX6SX) && !is_cpu_type(MXC_CPU_MX6UL) &&
- !is_cpu_type(MXC_CPU_MX6SL))
+ if (!is_mx6sx() && !is_mx6ul() && !is_mx6sl())
mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
/* Limit mem_speed for MX6D/MX6Q */
- if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) {
+ if (is_mx6dq() || is_mx6dqp()) {
if (mem_speed > 1066)
mem_speed = 1066; /* 1066 MT/s */
@@ -1221,7 +1219,7 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo,
* Data rate of 1066 MT/s requires 533 MHz DDR3 clock, but MX6D/Q supports
* up to 528 MHz, so reduce the clock to fit chip specs
*/
- if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) {
+ if (is_mx6dq() || is_mx6dqp()) {
if (clock > 528)
clock = 528; /* 528 MHz */
}
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index d4b22ad7f3..88fcfdc2aa 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -108,6 +108,12 @@ u32 get_cpu_rev(void)
#define OCOTP_CFG3_SPEED_1GHZ 2
#define OCOTP_CFG3_SPEED_1P2GHZ 3
+/*
+ * For i.MX6UL
+ */
+#define OCOTP_CFG3_SPEED_528MHZ 1
+#define OCOTP_CFG3_SPEED_696MHZ 2
+
u32 get_cpu_speed_grade_hz(void)
{
struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
@@ -120,17 +126,26 @@ u32 get_cpu_speed_grade_hz(void)
val >>= OCOTP_CFG3_SPEED_SHIFT;
val &= 0x3;
+ if (is_mx6ul()) {
+ if (val == OCOTP_CFG3_SPEED_528MHZ)
+ return 528000000;
+ else if (val == OCOTP_CFG3_SPEED_696MHZ)
+ return 69600000;
+ else
+ return 0;
+ }
+
switch (val) {
/* Valid for IMX6DQ */
case OCOTP_CFG3_SPEED_1P2GHZ:
- if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
+ if (is_mx6dq() || is_mx6dqp())
return 1200000000;
/* Valid for IMX6SX/IMX6SDL/IMX6DQ */
case OCOTP_CFG3_SPEED_1GHZ:
return 996000000;
/* Valid for IMX6DQ */
case OCOTP_CFG3_SPEED_850MHZ:
- if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
+ if (is_mx6dq() || is_mx6dqp())
return 852000000;
/* Valid for IMX6SX/IMX6SDL/IMX6DQ */
case OCOTP_CFG3_SPEED_800MHZ:
@@ -278,7 +293,7 @@ static void clear_mmdc_ch_mask(void)
reg = readl(&mxc_ccm->ccdr);
/* Clear MMDC channel mask */
- if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL) || is_cpu_type(MXC_CPU_MX6SL))
+ if (is_mx6sx() || is_mx6ul() || is_mx6sl())
reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK);
else
reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK);
@@ -444,8 +459,7 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
struct fuse_bank4_regs *fuse =
(struct fuse_bank4_regs *)bank->fuse_regs;
- if ((is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) &&
- dev_id == 1) {
+ if ((is_mx6sx() || is_mx6ul()) && dev_id == 1) {
u32 value = readl(&fuse->mac_addr2);
mac[0] = value >> 24 ;
mac[1] = value >> 16 ;
@@ -509,7 +523,7 @@ void s_init(void)
u32 mask528;
u32 reg, periph1, periph2;
- if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL))
+ if (is_mx6sx() || is_mx6ul())
return;
/* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs
diff --git a/arch/arm/cpu/armv7/mx7/soc.c b/arch/arm/cpu/armv7/mx7/soc.c
index 073bbc6d01..ef46c92b09 100644
--- a/arch/arm/cpu/armv7/mx7/soc.c
+++ b/arch/arm/cpu/armv7/mx7/soc.c
@@ -441,3 +441,11 @@ void s_init(void)
return;
}
+
+void reset_misc(void)
+{
+#ifdef CONFIG_VIDEO_MXS
+ lcdif_power_down();
+#endif
+}
+
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 9a5a6b53f7..297687d3c6 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -636,6 +636,9 @@ int timer_init(void)
#ifdef CONFIG_FSL_LSCH3
u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR;
#endif
+#ifdef CONFIG_LS2080A
+ u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET;
+#endif
#ifdef COUNTER_FREQUENCY_REAL
unsigned long cntfrq = COUNTER_FREQUENCY_REAL;
@@ -650,6 +653,15 @@ int timer_init(void)
out_le32(cltbenr, 0xf);
#endif
+#ifdef CONFIG_LS2080A
+ /*
+ * In certain Layerscape SoCs, the clock for each core's
+ * has an enable bit in the PMU Physical Core Time Base Enable
+ * Register (PCTBENR), which allows the watchdog to operate.
+ */
+ setbits_le32(pctbenr, 0xff);
+#endif
+
/* Enable clock for timer
* This is a global setting.
*/
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3
index f9323c1d28..da5e052569 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3
+++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3
@@ -121,6 +121,35 @@ mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined
mcmemsize: MC DRAM block size. If this variable is not defined, the value
CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed.
+mcinitcmd: This environment variable is defined to initiate MC and DPL deployment
+ from the location where it is stored(NOR, NAND, SD, SATA, USB)during
+ u-boot booting.If this variable is not defined then MC_BOOT_ENV_VAR
+ will be null and MC will not be booted and DPL will not be applied
+ during U-boot booting.However the MC, DPC and DPL can be applied from
+ console independently.
+ The variable needs to be set from the console once and then on
+ rebooting the parameters set in the varible will automatically be
+ executed. The commmand is demostrated taking an example of mc boot
+ using NOR Flash i.e. MC, DPL, and DPC is stored in the NOR flash:
+
+ cp.b 0xa0000000 0x580300000 $filesize
+ cp.b 0x80000000 0x580800000 $filesize
+ cp.b 0x90000000 0x580700000 $filesize
+
+ setenv mcinitcmd 'fsl_mc start mc 0x580300000 0x580800000'
+
+ If only linux is to be booted then the mcinitcmd environment should be set as
+
+ setenv mcinitcmd 'fsl_mc start mc 0x580300000 0x580800000;fsl_mc apply DPL 0x580700000'
+
+ Here the addresses 0xa0000000, 0x80000000, 0x80000000 are of DDR to where
+ MC binary, DPC binary and DPL binary are stored and 0x580300000, 0x580800000
+ and 0x580700000 are addresses in NOR where these are copied. It is to be
+ noted that these addresses in 'fsl_mc start mc 0x580300000 0x580800000;fsl_mc apply DPL 0x580700000'
+ can be replaced with the addresses of DDR to
+ which these will be copied in case of these binaries being stored in other
+ devices like SATA, USB, NAND, SD etc.
+
Booting from NAND
-------------------
Booting from NAND requires two images, RCW and u-boot-with-spl.bin.
diff --git a/arch/arm/dts/fsl-ls2080a-qds.dts b/arch/arm/dts/fsl-ls2080a-qds.dts
index 547ec27837..0a7f1ffb2d 100644
--- a/arch/arm/dts/fsl-ls2080a-qds.dts
+++ b/arch/arm/dts/fsl-ls2080a-qds.dts
@@ -15,6 +15,7 @@
compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
aliases {
+ spi0 = &qspi;
spi1 = &dspi;
};
};
@@ -51,3 +52,16 @@
reg = <2>;
};
};
+
+&qspi {
+ bus-num = <0>;
+ status = "okay";
+
+ qflash0: s25fs256s@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
diff --git a/arch/arm/dts/fsl-ls2080a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi
index a5c579c5a5..68ed133853 100644
--- a/arch/arm/dts/fsl-ls2080a.dtsi
+++ b/arch/arm/dts/fsl-ls2080a.dtsi
@@ -126,4 +126,14 @@
interrupts = <0 26 0x4>; /* Level high type */
num-cs = <6>;
};
+
+ qspi: quadspi@1550000 {
+ compatible = "fsl,vf610-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x20c0000 0x0 0x10000>,
+ <0x0 0x20000000 0x0 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ num-cs = <4>;
+ };
};
diff --git a/arch/arm/imx-common/hab.c b/arch/arm/imx-common/hab.c
index 8bbcc22454..6731825060 100644
--- a/arch/arm/imx-common/hab.c
+++ b/arch/arm/imx-common/hab.c
@@ -17,60 +17,55 @@
#define hab_rvt_report_event_p \
( \
- ((is_cpu_type(MXC_CPU_MX6Q) || \
- is_cpu_type(MXC_CPU_MX6D)) && \
- (soc_rev() >= CHIP_REV_1_5)) ? \
+ (is_mx6dqp()) ? \
((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT_NEW) : \
- (is_cpu_type(MXC_CPU_MX6DL) && \
- (soc_rev() >= CHIP_REV_1_2)) ? \
+ (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \
+ ((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT_NEW) : \
+ (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT_NEW) : \
((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT) \
)
#define hab_rvt_report_status_p \
( \
- ((is_cpu_type(MXC_CPU_MX6Q) || \
- is_cpu_type(MXC_CPU_MX6D)) && \
- (soc_rev() >= CHIP_REV_1_5)) ? \
+ (is_mx6dqp()) ? \
+ ((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS_NEW) :\
+ (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \
((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS_NEW) :\
- (is_cpu_type(MXC_CPU_MX6DL) && \
- (soc_rev() >= CHIP_REV_1_2)) ? \
+ (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS_NEW) :\
((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS) \
)
#define hab_rvt_authenticate_image_p \
( \
- ((is_cpu_type(MXC_CPU_MX6Q) || \
- is_cpu_type(MXC_CPU_MX6D)) && \
- (soc_rev() >= CHIP_REV_1_5)) ? \
+ (is_mx6dqp()) ? \
+ ((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE_NEW) : \
+ (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \
((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE_NEW) : \
- (is_cpu_type(MXC_CPU_MX6DL) && \
- (soc_rev() >= CHIP_REV_1_2)) ? \
+ (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE_NEW) : \
((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE) \
)
#define hab_rvt_entry_p \
( \
- ((is_cpu_type(MXC_CPU_MX6Q) || \
- is_cpu_type(MXC_CPU_MX6D)) && \
- (soc_rev() >= CHIP_REV_1_5)) ? \
+ (is_mx6dqp()) ? \
((hab_rvt_entry_t *)HAB_RVT_ENTRY_NEW) : \
- (is_cpu_type(MXC_CPU_MX6DL) && \
- (soc_rev() >= CHIP_REV_1_2)) ? \
+ (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \
+ ((hab_rvt_entry_t *)HAB_RVT_ENTRY_NEW) : \
+ (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_entry_t *)HAB_RVT_ENTRY_NEW) : \
((hab_rvt_entry_t *)HAB_RVT_ENTRY) \
)
#define hab_rvt_exit_p \
( \
- ((is_cpu_type(MXC_CPU_MX6Q) || \
- is_cpu_type(MXC_CPU_MX6D)) && \
- (soc_rev() >= CHIP_REV_1_5)) ? \
+ (is_mx6dqp()) ? \
+ ((hab_rvt_exit_t *)HAB_RVT_EXIT_NEW) : \
+ (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \
((hab_rvt_exit_t *)HAB_RVT_EXIT_NEW) : \
- (is_cpu_type(MXC_CPU_MX6DL) && \
- (soc_rev() >= CHIP_REV_1_2)) ? \
+ (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_exit_t *)HAB_RVT_EXIT_NEW) : \
((hab_rvt_exit_t *)HAB_RVT_EXIT) \
)
@@ -424,8 +419,7 @@ uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size)
*/
/* Check MMU enabled */
if (is_soc_type(MXC_SOC_MX6) && get_cr() & CR_M) {
- if (is_cpu_type(MXC_CPU_MX6Q) ||
- is_cpu_type(MXC_CPU_MX6D)) {
+ if (is_mx6dq()) {
/*
* This won't work on Rev 1.0.0 of
* i.MX6Q/D, since their ROM doesn't
@@ -434,10 +428,9 @@ uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size)
*/
if (!is_mx6dqp())
writel(1, MX6DQ_PU_IROM_MMU_EN_VAR);
- } else if (is_cpu_type(MXC_CPU_MX6DL) ||
- is_cpu_type(MXC_CPU_MX6SOLO)) {
+ } else if (is_mx6sdl()) {
writel(1, MX6DLS_PU_IROM_MMU_EN_VAR);
- } else if (is_cpu_type(MXC_CPU_MX6SL)) {
+ } else if (is_mx6sl()) {
writel(1, MX6SL_PU_IROM_MMU_EN_VAR);
}
}
diff --git a/arch/arm/imx-common/init.c b/arch/arm/imx-common/init.c
index 15dab1d904..3d2ce3a82e 100644
--- a/arch/arm/imx-common/init.c
+++ b/arch/arm/imx-common/init.c
@@ -44,7 +44,7 @@ void init_aips(void)
writel(0x00000000, &aips2->opacr3);
writel(0x00000000, &aips2->opacr4);
- if (is_cpu_type(MXC_CPU_MX6SX) || is_soc_type(MXC_SOC_MX7)) {
+ if (is_mx6sx() || is_mx7()) {
/*
* Set all MPROTx to be non-bufferable, trusted for R/W,
* not forced to user-mode.
@@ -78,8 +78,7 @@ void imx_set_wdog_powerdown(bool enable)
writew(enable, &wdog1->wmcr);
writew(enable, &wdog2->wmcr);
- if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL) ||
- is_soc_type(MXC_SOC_MX7))
+ if (is_mx6sx() || is_mx6ul() || is_mx7())
writew(enable, &wdog3->wmcr);
#ifdef CONFIG_MX7D
writew(enable, &wdog4->wmcr);
diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c
index 228d5f8f1c..66137d148a 100644
--- a/arch/arm/imx-common/iomux-v3.c
+++ b/arch/arm/imx-common/iomux-v3.c
@@ -83,7 +83,7 @@ void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
#if defined(CONFIG_MX6QDL)
stride = 2;
- if (!is_cpu_type(MXC_CPU_MX6Q) && !is_cpu_type(MXC_CPU_MX6D))
+ if (!is_mx6dq())
p += 1;
#else
stride = 1;
diff --git a/arch/arm/imx-common/sata.c b/arch/arm/imx-common/sata.c
index d174a463f8..acf9831870 100644
--- a/arch/arm/imx-common/sata.c
+++ b/arch/arm/imx-common/sata.c
@@ -15,7 +15,7 @@ int setup_sata(void)
struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
int ret;
- if (!is_cpu_type(MXC_CPU_MX6Q) && !is_cpu_type(MXC_CPU_MX6D))
+ if (!is_mx6dq() && !is_mx6dqp())
return 1;
ret = enable_sata_clock();
diff --git a/arch/arm/imx-common/timer.c b/arch/arm/imx-common/timer.c
index 92c7218e69..a01590ced2 100644
--- a/arch/arm/imx-common/timer.c
+++ b/arch/arm/imx-common/timer.c
@@ -43,10 +43,8 @@ DECLARE_GLOBAL_DATA_PTR;
static inline int gpt_has_clk_source_osc(void)
{
#if defined(CONFIG_MX6)
- if (((is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) &&
- (soc_rev() > CHIP_REV_1_0)) || is_cpu_type(MXC_CPU_MX6DL) ||
- is_cpu_type(MXC_CPU_MX6SOLO) || is_cpu_type(MXC_CPU_MX6SX) ||
- is_cpu_type(MXC_CPU_MX6UL))
+ if (((is_mx6dq()) && (soc_rev() > CHIP_REV_1_0)) ||
+ is_mx6dqp() || is_mx6sdl() || is_mx6sx() || is_mx6ul())
return 1;
return 0;
@@ -86,10 +84,7 @@ int timer_init(void)
i |= GPTCR_CLKSOURCE_OSC | GPTCR_TEN;
/* For DL/S, SX, UL, set 24Mhz OSC Enable bit and prescaler */
- if (is_cpu_type(MXC_CPU_MX6DL) ||
- is_cpu_type(MXC_CPU_MX6SOLO) ||
- is_cpu_type(MXC_CPU_MX6SX) ||
- is_cpu_type(MXC_CPU_MX6UL)) {
+ if (is_mx6sdl() || is_mx6sx() || is_mx6ul()) {
i |= GPTCR_24MEN;
/* Produce 3Mhz clock */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
index 1cebe2fbb0..df877ddc7d 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
@@ -122,6 +122,8 @@ static const struct sys_mmu_table early_mmu_table[] = {
PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN },
{ CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE,
CONFIG_SYS_FSL_OCRAM_SIZE, MT_NORMAL, PTE_BLOCK_NON_SHARE },
+ { CONFIG_SYS_FSL_QSPI_BASE1, CONFIG_SYS_FSL_QSPI_BASE1,
+ CONFIG_SYS_FSL_QSPI_SIZE1, MT_NORMAL, PTE_BLOCK_NON_SHARE},
/* For IFC Region #1, only the first 4MB is cache-enabled */
{ CONFIG_SYS_FSL_IFC_BASE1, CONFIG_SYS_FSL_IFC_BASE1,
CONFIG_SYS_FSL_IFC_SIZE1_1, MT_NORMAL, PTE_BLOCK_NON_SHARE },
@@ -176,6 +178,8 @@ static const struct sys_mmu_table final_mmu_table[] = {
{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
CONFIG_SYS_FSL_DRAM_SIZE1, MT_NORMAL,
PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS },
+ { CONFIG_SYS_FSL_QSPI_BASE1, CONFIG_SYS_FSL_QSPI_BASE1,
+ CONFIG_SYS_FSL_QSPI_SIZE1, MT_NORMAL, PTE_BLOCK_NON_SHARE},
{ CONFIG_SYS_FSL_QSPI_BASE2, CONFIG_SYS_FSL_QSPI_BASE2,
CONFIG_SYS_FSL_QSPI_SIZE2, MT_DEVICE_NGNRNE,
PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN },
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 65b3357009..8d12d6cb93 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -26,6 +26,7 @@
#define CONFIG_SYS_FSL_TIMER_ADDR 0x023d0000
#define CONFIG_SYS_FSL_PMU_CLTBENR (CONFIG_SYS_FSL_PMU_ADDR + \
0x18A0)
+#define FSL_PMU_PCTBENR_OFFSET (CONFIG_SYS_FSL_PMU_ADDR + 0x8A0)
#define CONFIG_SYS_FSL_WRIOP1_ADDR (CONFIG_SYS_IMMR + 0x7B80000)
#define CONFIG_SYS_FSL_WRIOP1_MDIO1 (CONFIG_SYS_FSL_WRIOP1_ADDR + 0x16000)
@@ -128,6 +129,8 @@
#define DCFG_PORSR1_RCW_SRC_NOR 0x12f00000
#define DCFG_RCWSR13 0x130
#define DCFG_RCWSR13_DSPI (0 << 8)
+#define DCFG_RCWSR15 0x138
+#define DCFG_RCWSR15_IFCGRPABASE_QSPI 0x3
#define DCFG_DCSR_BASE 0X700100000ULL
#define DCFG_DCSR_PORCR1 0x000
@@ -139,6 +142,7 @@
/* Supplemental Configuration */
#define SCFG_BASE 0x01fc0000
#define SCFG_USB3PRM1CR 0x000
+#define SCFG_QSPICLKCTLR 0x10
#define TP_ITYP_AV 0x00000001 /* Initiator available */
#define TP_ITYP_TYPE(x) (((x) & 0x6) >> 1) /* Initiator Type */
diff --git a/arch/arm/include/asm/imx-common/sys_proto.h b/arch/arm/include/asm/imx-common/sys_proto.h
index 386c2dc42b..32f95b33c2 100644
--- a/arch/arm/include/asm/imx-common/sys_proto.h
+++ b/arch/arm/include/asm/imx-common/sys_proto.h
@@ -24,7 +24,15 @@
#define is_cpu_type(cpu) (get_cpu_type() == cpu)
#define is_soc_type(soc) (get_soc_type() == soc)
+#define is_mx6() (is_soc_type(MXC_SOC_MX6))
+#define is_mx7() (is_soc_type(MXC_SOC_MX7))
+
#define is_mx6dqp() (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP))
+#define is_mx6dq() (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
+#define is_mx6sdl() (is_cpu_type(MXC_CPU_MX6SOLO) || is_cpu_type(MXC_CPU_MX6DL))
+#define is_mx6sx() (is_cpu_type(MXC_CPU_MX6SX))
+#define is_mx6sl() (is_cpu_type(MXC_CPU_MX6SL))
+#define is_mx6ul() (is_cpu_type(MXC_CPU_MX6UL))
u32 get_nr_cpus(void);
u32 get_cpu_rev(void);
diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c
index e522ff3b7f..269043dedc 100644
--- a/arch/x86/cpu/cpu.c
+++ b/arch/x86/cpu/cpu.c
@@ -24,6 +24,7 @@
#include <dm.h>
#include <errno.h>
#include <malloc.h>
+#include <syscon.h>
#include <asm/control_regs.h>
#include <asm/coreboot_tables.h>
#include <asm/cpu.h>
@@ -751,6 +752,10 @@ int cpu_init_r(void)
uclass_first_device(UCLASS_PCH, &dev);
uclass_first_device(UCLASS_LPC, &dev);
+ /* Set up pin control if available */
+ ret = syscon_get_by_driver_data(X86_SYSCON_PINCONF, &dev);
+ debug("%s, pinctrl=%p, ret=%d\n", __func__, dev, ret);
+
return 0;
}
diff --git a/arch/x86/dts/bayleybay.dts b/arch/x86/dts/bayleybay.dts
index 4a50d8665e..c8907ce44b 100644
--- a/arch/x86/dts/bayleybay.dts
+++ b/arch/x86/dts/bayleybay.dts
@@ -65,6 +65,26 @@
};
};
+ pch_pinctrl {
+ compatible = "intel,x86-pinctrl";
+ reg = <0 0>;
+
+ /*
+ * As of today, the latest version FSP (gold4) for BayTrail
+ * misses the PAD configuration of the SD controller's Card
+ * Detect signal. The default PAD value for the CD pin sets
+ * the pin to work in GPIO mode, which causes card detect
+ * status cannot be reflected by the Present State register
+ * in the SD controller (bit 16 & bit 18 are always zero).
+ *
+ * Configure this pin to function 1 (SD controller).
+ */
+ sdmmc3_cd@0 {
+ pad-offset = <0x3a0>;
+ mode-func = <1>;
+ };
+ };
+
pci {
compatible = "pci-x86";
#address-cells = <3>;
@@ -213,7 +233,7 @@
fsp,mrc-init-mmio-size = <0x800>;
fsp,mrc-init-spd-addr1 = <0xa0>;
fsp,mrc-init-spd-addr2 = <0xa2>;
- fsp,emmc-boot-mode = <2>;
+ fsp,emmc-boot-mode = <1>;
fsp,enable-sdio;
fsp,enable-sdcard;
fsp,enable-hsuart1;
diff --git a/arch/x86/dts/conga-qeval20-qa3-e3845.dts b/arch/x86/dts/conga-qeval20-qa3-e3845.dts
index 1a4ecaad0e..fba089d666 100644
--- a/arch/x86/dts/conga-qeval20-qa3-e3845.dts
+++ b/arch/x86/dts/conga-qeval20-qa3-e3845.dts
@@ -30,6 +30,22 @@
pch_pinctrl {
compatible = "intel,x86-pinctrl";
+ reg = <0 0>;
+
+ /*
+ * As of today, the latest version FSP (gold4) for BayTrail
+ * misses the PAD configuration of the SD controller's Card
+ * Detect signal. The default PAD value for the CD pin sets
+ * the pin to work in GPIO mode, which causes card detect
+ * status cannot be reflected by the Present State register
+ * in the SD controller (bit 16 & bit 18 are always zero).
+ *
+ * Configure this pin to function 1 (SD controller).
+ */
+ sdmmc3_cd@0 {
+ pad-offset = <0x3a0>;
+ mode-func = <1>;
+ };
};
chosen {
@@ -217,7 +233,7 @@
fsp,mrc-init-mmio-size = <0x800>;
fsp,mrc-init-spd-addr1 = <0xa0>;
fsp,mrc-init-spd-addr2 = <0xa2>;
- fsp,emmc-boot-mode = <2>;
+ fsp,emmc-boot-mode = <1>;
fsp,enable-sdio;
fsp,enable-sdcard;
fsp,enable-hsuart1;
diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts
index 936455b5e5..1a8a8cc7f1 100644
--- a/arch/x86/dts/minnowmax.dts
+++ b/arch/x86/dts/minnowmax.dts
@@ -29,6 +29,7 @@
pch_pinctrl {
compatible = "intel,x86-pinctrl";
+ reg = <0 0>;
/* GPIO E0 */
soc_gpio_s5_0@0 {
@@ -72,6 +73,21 @@
output-value = <1>;
direction = <PIN_OUTPUT>;
};
+
+ /*
+ * As of today, the latest version FSP (gold4) for BayTrail
+ * misses the PAD configuration of the SD controller's Card
+ * Detect signal. The default PAD value for the CD pin sets
+ * the pin to work in GPIO mode, which causes card detect
+ * status cannot be reflected by the Present State register
+ * in the SD controller (bit 16 & bit 18 are always zero).
+ *
+ * Configure this pin to function 1 (SD controller).
+ */
+ sdmmc3_cd@0 {
+ pad-offset = <0x3a0>;
+ mode-func = <1>;
+ };
};
chosen {
@@ -246,7 +262,7 @@
fsp,mrc-init-mmio-size = <0x800>;
fsp,mrc-init-spd-addr1 = <0xa0>;
fsp,mrc-init-spd-addr2 = <0xa2>;
- fsp,emmc-boot-mode = <2>;
+ fsp,emmc-boot-mode = <1>;
fsp,enable-sdio;
fsp,enable-sdcard;
fsp,enable-hsuart1;
diff --git a/arch/x86/lib/acpi_table.c b/arch/x86/lib/acpi_table.c
index ffb4678e51..bb71286dba 100644
--- a/arch/x86/lib/acpi_table.c
+++ b/arch/x86/lib/acpi_table.c
@@ -183,20 +183,20 @@ static int acpi_create_madt_lapic(struct acpi_madt_lapic *lapic,
int acpi_create_madt_lapics(u32 current)
{
struct udevice *dev;
- int length = 0;
+ int total_length = 0;
for (uclass_find_first_device(UCLASS_CPU, &dev);
dev;
uclass_find_next_device(&dev)) {
struct cpu_platdata *plat = dev_get_parent_platdata(dev);
-
- length += acpi_create_madt_lapic(
- (struct acpi_madt_lapic *)current,
- plat->cpu_id, plat->cpu_id);
+ int length = acpi_create_madt_lapic(
+ (struct acpi_madt_lapic *)current,
+ plat->cpu_id, plat->cpu_id);
current += length;
+ total_length += length;
}
- return length;
+ return total_length;
}
int acpi_create_madt_ioapic(struct acpi_madt_ioapic *ioapic, u8 id,
generated by cgit (git 2.34.1) at 2024-12-26 04:21:10 +0000