diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mach-sunxi/Kconfig | 81 | ||||
| -rw-r--r-- | arch/arm/mach-sunxi/Makefile | 30 |
2 files changed, 91 insertions, 20 deletions
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 15cc01439a..b868f0e350 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -6,6 +6,73 @@ config SPL_LDSCRIPT config IDENT_STRING default " Allwinner Technology" +config DRAM_SUN4I + bool + help + Select this dram controller driver for Sun4/5/7i platforms, + like A10/A13/A20. + +config DRAM_SUN6I + bool + help + Select this dram controller driver for Sun6i platforms, + like A31/A31s. + +config DRAM_SUN8I_A23 + bool + help + Select this dram controller driver for Sun8i platforms, + for A23 SOC. + +config DRAM_SUN8I_A33 + bool + help + Select this dram controller driver for Sun8i platforms, + for A33 SOC. + +config DRAM_SUN8I_A83T + bool + help + Select this dram controller driver for Sun8i platforms, + for A83T SOC. + +config DRAM_SUN9I + bool + help + Select this dram controller driver for Sun9i platforms, + like A80. + +config SUN6I_P2WI + bool "Allwinner sun6i internal P2WI controller" + help + If you say yes to this option, support will be included for the + P2WI (Push/Pull 2 Wire Interface) controller embedded in some sunxi + SOCs. + The P2WI looks like an SMBus controller (which supports only byte + accesses), except that it only supports one slave device. + This interface is used to connect to specific PMIC devices (like the + AXP221). + +config SUN6I_PRCM + bool + help + Support for the PRCM (Power/Reset/Clock Management) unit available + in A31 SoC. + +config AXP_PMIC_BUS + bool "Sunxi AXP PMIC bus access helpers" + help + Select this PMIC bus access helpers for Sunxi platform PRCM or other + AXP family PMIC devices. + +config SUN8I_RSB + bool "Allwinner sunXi Reduced Serial Bus Driver" + help + Say y here to enable support for Allwinner's Reduced Serial Bus + (RSB) support. This controller is responsible for communicating + with various RSB based devices, such as AXP223, AXP8XX PMICs, + and AC100/AC200 ICs. + config SUNXI_HIGH_SRAM bool default n @@ -71,6 +138,7 @@ config MACH_SUN4I bool "sun4i (Allwinner A10)" select CPU_V7 select ARM_CORTEX_CPU_IS_UP + select DRAM_SUN4I select SUNXI_GEN_SUN4I select SUPPORT_SPL @@ -78,6 +146,7 @@ config MACH_SUN5I bool "sun5i (Allwinner A13)" select CPU_V7 select ARM_CORTEX_CPU_IS_UP + select DRAM_SUN4I select SUNXI_GEN_SUN4I select SUPPORT_SPL imply CONS_INDEX_2 if !DM_SERIAL @@ -88,6 +157,9 @@ config MACH_SUN6I select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI + select DRAM_SUN6I + select SUN6I_P2WI + select SUN6I_PRCM select SUNXI_GEN_SUN6I select SUPPORT_SPL select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT @@ -98,6 +170,7 @@ config MACH_SUN7I select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI + select DRAM_SUN4I select SUNXI_GEN_SUN4I select SUPPORT_SPL select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT @@ -108,6 +181,7 @@ config MACH_SUN8I_A23 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI + select DRAM_SUN8I_A23 select SUNXI_GEN_SUN6I select SUPPORT_SPL select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT @@ -119,6 +193,7 @@ config MACH_SUN8I_A33 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI + select DRAM_SUN8I_A33 select SUNXI_GEN_SUN6I select SUPPORT_SPL select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT @@ -127,6 +202,7 @@ config MACH_SUN8I_A33 config MACH_SUN8I_A83T bool "sun8i (Allwinner A83T)" select CPU_V7 + select DRAM_SUN8I_A83T select SUNXI_GEN_SUN6I select MMC_SUNXI_HAS_NEW_MODE select SUPPORT_SPL @@ -166,8 +242,11 @@ config MACH_SUN8I_V3S config MACH_SUN9I bool "sun9i (Allwinner A80)" select CPU_V7 + select DRAM_SUN9I + select SUN6I_PRCM select SUNXI_HIGH_SRAM select SUNXI_GEN_SUN6I + select SUN8I_RSB select SUPPORT_SPL config MACH_SUN50I @@ -196,6 +275,8 @@ endchoice # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33" config MACH_SUN8I bool + select SUN8I_RSB + select SUN6I_PRCM default y if MACH_SUN8I_A23 default y if MACH_SUN8I_A33 default y if MACH_SUN8I_A83T diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index 6ddf682764..183175340a 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -16,12 +16,10 @@ obj-y += pinmux.o ifndef CONFIG_MACH_SUN9I obj-y += usb_phy.o endif -obj-$(CONFIG_MACH_SUN6I) += prcm.o -obj-$(CONFIG_MACH_SUN8I) += prcm.o -obj-$(CONFIG_MACH_SUN9I) += prcm.o -obj-$(CONFIG_MACH_SUN6I) += p2wi.o -obj-$(CONFIG_MACH_SUN8I) += rsb.o -obj-$(CONFIG_MACH_SUN9I) += rsb.o +obj-$(CONFIG_SUN6I_P2WI) += p2wi.o +obj-$(CONFIG_SUN6I_PRCM) += prcm.o +obj-$(CONFIG_AXP_PMIC_BUS) += pmic_bus.o +obj-$(CONFIG_SUN8I_RSB) += rsb.o obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o obj-$(CONFIG_MACH_SUN6I) += clock_sun6i.o @@ -34,22 +32,14 @@ obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o endif obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o -obj-$(CONFIG_AXP152_POWER) += pmic_bus.o -obj-$(CONFIG_AXP209_POWER) += pmic_bus.o -obj-$(CONFIG_AXP221_POWER) += pmic_bus.o -obj-$(CONFIG_AXP809_POWER) += pmic_bus.o -obj-$(CONFIG_AXP818_POWER) += pmic_bus.o - ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_MACH_SUN4I) += dram_sun4i.o -obj-$(CONFIG_MACH_SUN5I) += dram_sun4i.o -obj-$(CONFIG_MACH_SUN6I) += dram_sun6i.o -obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o -obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o -obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o -obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o +obj-$(CONFIG_DRAM_SUN4I) += dram_sun4i.o +obj-$(CONFIG_DRAM_SUN6I) += dram_sun6i.o +obj-$(CONFIG_DRAM_SUN8I_A23) += dram_sun8i_a23.o +obj-$(CONFIG_DRAM_SUN8I_A33) += dram_sun8i_a33.o +obj-$(CONFIG_DRAM_SUN8I_A83T) += dram_sun8i_a83t.o +obj-$(CONFIG_DRAM_SUN9I) += dram_sun9i.o obj-$(CONFIG_SPL_SPI_SUNXI) += spl_spi_sunxi.o obj-$(CONFIG_SUNXI_DRAM_DW) += dram_sunxi_dw.o obj-$(CONFIG_SUNXI_DRAM_DW) += dram_timings/ -obj-$(CONFIG_MACH_SUN9I) += dram_sun9i.o endif |