1 files changed, 0 insertions, 149 deletions
diff --git a/board/RPXlite/RPXlite.c b/board/RPXlite/RPXlite.c
deleted file mode 100644
index 08575a4930..0000000000
--- a/board/RPXlite/RPXlite.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Yoo. Jonghoon, IPone, yooth@ipone.co.kr
- * U-Boot port on RPXlite board
- *
- * DRAM related UPMA register values are modified.
- * See RPXLite engineering note : 50MHz/60ns - UPM RAM WORDS
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-
-/* ------------------------------------------------------------------------- */
-
-#define	_NOT_USED_	0xFFFFCC25
-
-const uint sdram_table[] = {
-	/*
-	 * Single Read. (Offset 00h in UPMA RAM)
-	 */
-	0xCFFFCC24, 0x0FFFCC04, 0X0CAFCC04, 0X03AFCC08,
-	0x3FBFCC27,		/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Burst Read. (Offset 08h in UPMA RAM)
-	 */
-	0xCFFFCC24, 0x0FFFCC04, 0x0CAFCC84, 0x03AFCC88,
-	0x3FBFCC27,		/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Single Write. (Offset 18h in UPMA RAM)
-	 */
-	0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC04, 0x03FFCC00,
-	0x3FFFCC27,		/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Burst Write. (Offset 20h in UPMA RAM)
-	 */
-	0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC80, 0x03FFCC8C,
-	0x0CFFCC00, 0x33FFCC27,	/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Refresh. (Offset 30h in UPMA RAM)
-	 */
-	0xC0FFCC24, 0x03FFCC24, 0x0FFFCC24, 0x0FFFCC24,
-	0x3FFFCC27,		/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Exception. (Offset 3Ch in UPMA RAM)
-	 */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	puts ("Board: RPXlite\n");
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size10;
-
-	upmconfig (UPMA, (uint *) sdram_table,
-		   sizeof (sdram_table) / sizeof (uint));
-
-	/* Refresh clock prescalar */
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-	memctl->memc_mar = 0x00000000;
-
-	/* Map controller banks 1 to the SDRAM bank */
-	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
-	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-
-	memctl->memc_mamr = CONFIG_SYS_MAMR_10COL & (~(MAMR_PTAE));	/* no refresh yet */
-
-	udelay (200);
-
-	/* perform SDRAM initializsation sequence */
-
-	memctl->memc_mcr = 0x80002230;	/* SDRAM bank 0 - refresh twice */
-	udelay (1);
-
-	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
-
-	udelay (1000);
-
-	/* Check Bank 0 Memory Size
-	 * try 10 column mode
-	 */
-
-	size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE_PRELIM,
-			    SDRAM_MAX_SIZE);
-
-	return (size10);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
-			   long int maxsize)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	memctl->memc_mamr = mamr_value;
-
-	return (get_ram_size (base, maxsize));
-}