diff options
Diffstat (limited to 'board/RPXlite_dw/RPXlite_dw.c')
-rw-r--r-- | board/RPXlite_dw/RPXlite_dw.c | 164 |
1 files changed, 0 insertions, 164 deletions
diff --git a/board/RPXlite_dw/RPXlite_dw.c b/board/RPXlite_dw/RPXlite_dw.c deleted file mode 100644 index 29d52dec8c..0000000000 --- a/board/RPXlite_dw/RPXlite_dw.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * (C) Copyright 2004 - * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Sam Song - * U-Boot port on RPXlite DW board : RPXlite_DW or LITE_DW - * Tested on working at 64MHz(CPU)/32MHz(BUS),48MHz/24MHz - * with 64MB, 2 SDRAM Micron chips,MT48LC16M16A2-75. - */ - -#include <common.h> -#include <mpc8xx.h> - -/* ------------------------------------------------------------------------- */ -static long int dram_size (long int, long int *, long int); -/* ------------------------------------------------------------------------- */ - -#define _NOT_USED_ 0xFFFFCC25 - -const uint sdram_table[] = -{ - /* - * Single Read. (Offset 00h in UPMA RAM) - */ - 0x0F03CC04, 0x00ACCC24, 0x1FF74C20, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, - - /* - * Burst Read. (Offset 08h in UPMA RAM) - */ - 0x0F03CC04, 0x00ACCC24, 0x00FFCC20, 0x00FFCC20, - 0x01FFCC20, 0x1FF74C20, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, - - /* - * Single Write. (Offset 18h in UPMA RAM) - */ - 0x0F03CC02, 0x00AC0C24, 0x1FF74C25, /* last */ - _NOT_USED_, _NOT_USED_, 0x0FA00C34,0x0FFFCC35, - _NOT_USED_, - - /* - * Burst Write. (Offset 20h in UPMA RAM) - */ - 0x0F03CC00, 0x00AC0C20, 0x00FFFC20, 0x00FFFC22, - 0x01FFFC24, 0x1FF74C25, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, - - /* - * Refresh. (Offset 30h in UPMA RAM) - */ - 0x0FF0CC24, 0xFFFFCC24, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, 0xEFFB8C34, 0x0FF74C34, - 0x0FFACCB4, 0x0FF5CC34, 0x0FFFCC34, 0x0FFFCCB4, - /* INIT sequence RAM WORDS - * SDRAM Initialization (offset 0x36 in UPMA RAM) - * The above definition uses the remaining space - * to establish an initialization sequence, - * which is executed by a RUN command. - * The sequence is COMMAND INHIBIT(NOP),Precharge, - * Load Mode Register,NOP,Auto Refresh. - */ - - /* - * Exception. (Offset 3Ch in UPMA RAM) - */ - 0x0FEA8C34, 0x1FB54C34, 0xFFFFCC34, _NOT_USED_ -}; - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - puts ("Board: RPXlite_DW\n") ; - return (0) ; -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size9; - - upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); - - /* Refresh clock prescalar */ - memctl->memc_mptpr = CONFIG_SYS_MPTPR ; - - memctl->memc_mar = 0x00000088; - - /* Map controller banks 1 to the SDRAM bank */ - memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; - memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; - - memctl->memc_mamr = CONFIG_SYS_MAMR_9COL & (~(MAMR_PTAE)); /* no refresh yet */ - /*Disable Periodic timer A. */ - - udelay(200); - - /* perform SDRAM initializsation sequence */ - - memctl->memc_mcr = 0x80002236; /* SDRAM bank 0 - refresh twice */ - - udelay(1); - - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - - /*Enable Periodic timer A */ - - udelay (1000); - - /* Check Bank 0 Memory Size - * try 9 column mode - */ - - size9 = dram_size (CONFIG_SYS_MAMR_9COL, SDRAM_BASE_PRELIM, SDRAM_MAX_SIZE); - - /* - * Final mapping: - */ - - memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; - - udelay (1000); - - return (size9); -} - -void rpxlite_init (void) -{ - /* Enable NVRAM */ - *((uchar *) BCSR0) |= BCSR0_ENNVRAM; -} - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ -static long int dram_size (long int mamr_value, long int *base, - long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_mamr = mamr_value; - - return (get_ram_size (base, maxsize)); -} |