diff options
Diffstat (limited to 'board/RPXlite_dw/flash.c')
-rw-r--r-- | board/RPXlite_dw/flash.c | 474 |
1 files changed, 0 insertions, 474 deletions
diff --git a/board/RPXlite_dw/flash.c b/board/RPXlite_dw/flash.c deleted file mode 100644 index c8de5ef5ee..0000000000 --- a/board/RPXlite_dw/flash.c +++ /dev/null @@ -1,474 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Yoo. Jonghoon, IPone, yooth@ipone.co.kr - * U-Boot port on RPXlite board - * - * Some of flash control words are modified. (from 2x16bit device - * to 4x8bit device) - * RPXLite board I tested has only 4 AM29LV800BB devices. Other devices - * are not tested. - * - * (?) Does an RPXLite board which - * does not use AM29LV800 flash memory exist ? - * I don't know... - */ - -/* Yes,Yoo.They do use other FLASH for the board. - * - * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn - * U-Boot port on RPXlite DW version board - * - * By now,it uses 4 AM29DL323DB90VI devices(4x8bit). - * The total FLASH has 16MB(4x4MB). - * I just made some necessary changes on the basis of Wolfgang and Yoo's job. - * - * June 8, 2004 */ - -#include <common.h> -#include <mpc8xx.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions vu_long : volatile unsigned long IN include/common.h - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -unsigned long flash_init (void) -{ - unsigned long size_b0 ; - int i; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* If Monitor is in the cope of FLASH,then - * protect this area by default in case for - * other occupation. [SAM] */ - - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1, - &flash_info[0]); -#endif - flash_info[0].size = size_b0; - return (size_b0); -} - -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x00010000; - info->start[3] = base + 0x00018000; - info->start[4] = base + 0x00020000; - info->start[5] = base + 0x00028000; - info->start[6] = base + 0x00030000; - info->start[7] = base + 0x00038000; - - for (i = 8; i < info->sector_count; i++) { - info->start[i] = base + ((i-7) * 0x00040000); - } - } else { - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00010000; - info->start[i--] = base + info->size - 0x00018000; - info->start[i--] = base + info->size - 0x00020000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00040000; - } - } - -} - -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - case FLASH_AMDL323B: printf ("AM29DL323B (32 Mbit, bottom boot sector)\n"); - break; - /* I just add the FLASH_AMDL323B for RPXlite_DW BOARD. [SAM] */ - default: printf ("Unknown Chip Type\n"); - break; - } - printf (" Size: %ld MB in %d Sectors\n",info->size >> 20, info->sector_count); - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s",info->start[i],info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - ulong value; - ulong base = (ulong)addr; - - /* Write auto select command: read Manufacturer ID */ - addr[0xAAA] = 0x00AA00AA ; - addr[0x555] = 0x00550055 ; - addr[0xAAA] = 0x00900090 ; - - value = addr[0] ; - switch (value & 0x00FF00FF) { - case AMD_MANUFACT: /* AMD_MANUFACT =0x00010001 in flash.h */ - info->flash_id = FLASH_MAN_AMD; /* FLASH_MAN_AMD=0x00000000 in flash.h */ - break; - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr[2] ; /* device ID */ - switch (value & 0x00FF00FF) { - case (AMD_ID_LV400T & 0x00FF00FF): - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - case (AMD_ID_LV400B & 0x00FF00FF): - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - case (AMD_ID_LV800T & 0x00FF00FF): - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - case (AMD_ID_LV800B & 0x00FF00FF): - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00400000; /* Size doubled by yooth */ - break; /* => 4 MB */ - case (AMD_ID_LV160T & 0x00FF00FF): - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - case (AMD_ID_LV160B & 0x00FF00FF): - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - case (AMD_ID_DL323B & 0x00FF00FF): - info->flash_id += FLASH_AMDL323B; - info->sector_count = 71; - info->size = 0x01000000; - break; /* => 16 MB(4x4MB) */ - /* AMD_ID_DL323B= 0x22532253 FLASH_AMDL323B= 0x0013 - * AMD_ID_DL323B could be found in <flash.h>.[SAM] - * So we could get : flash_id = 0x00000013. - * The first four-bit represents VEDOR ID,leaving others for FLASH ID. */ - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* FLASH_BTYPE=0x0001 mask for bottom boot sector type.If the last bit equals 1, - * it means bottom boot flash. GOOD IDEA! [SAM] - */ - - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x00010000; - info->start[3] = base + 0x00018000; - info->start[4] = base + 0x00020000; - info->start[5] = base + 0x00028000; - info->start[6] = base + 0x00030000; - info->start[7] = base + 0x00038000; - - for (i = 8; i < info->sector_count; i++) { - info->start[i] = base + ((i-7) * 0x00040000) ; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00010000; - info->start[i--] = base + info->size - 0x00018000; - info->start[i--] = base + info->size - 0x00020000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00040000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned long *)(info->start[i]); - /* info->protect[i] = addr[4] & 1 ; */ - /* Mask it for disorder FLASH protection **[Sam]** */ - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (volatile unsigned long *)info->start[0]; - - *addr = 0xF0F0F0F0; /* reset bank */ - } - return (info->size); -} - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_long *addr = (vu_long*)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0xAAA] = 0xAAAAAAAA; - addr[0x555] = 0x55555555; - addr[0xAAA] = 0x80808080; - addr[0xAAA] = 0xAAAAAAAA; - addr[0x555] = 0x55555555; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_long *)(info->start[sect]) ; - addr[0] = 0x30303030 ; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (vu_long *)(info->start[l_sect]); - while ((addr[0] & 0x80808080) != 0x80808080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (vu_long *)info->start[0]; - addr[0] = 0xF0F0F0F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long *)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0xAAA] = 0xAAAAAAAA; - addr[0x555] = 0x55555555; - addr[0xAAA] = 0xA0A0A0A0; - - *((vu_long *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} |