1 files changed, 0 insertions, 101 deletions
diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c
deleted file mode 100644
index 2eb18df5e7..0000000000
--- a/board/amcc/acadia/acadia.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-
-extern void board_pll_init_f(void);
-
-static void acadia_gpio_init(void)
-{
-	/*
-	 * GPIO0 setup (select GPIO or alternate function)
-	 */
-	out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
-	out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH);	/* output select */
-	out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
-	out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H);	/* input select */
-	out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
-	out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH);	/* three-state select */
-	out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR);  /* enable output driver for outputs */
-
-	/*
-	 * Ultra (405EZ) was nice enough to add another GPIO controller
-	 */
-	out32(GPIO1_OSRH, CONFIG_SYS_GPIO1_OSRH);	/* output select */
-	out32(GPIO1_OSRL, CONFIG_SYS_GPIO1_OSRL);
-	out32(GPIO1_ISR1H, CONFIG_SYS_GPIO1_ISR1H);	/* input select */
-	out32(GPIO1_ISR1L, CONFIG_SYS_GPIO1_ISR1L);
-	out32(GPIO1_TSRH, CONFIG_SYS_GPIO1_TSRH);	/* three-state select */
-	out32(GPIO1_TSRL, CONFIG_SYS_GPIO1_TSRL);
-	out32(GPIO1_TCR, CONFIG_SYS_GPIO1_TCR);  /* enable output driver for outputs */
-}
-
-int board_early_init_f(void)
-{
-	unsigned int reg;
-
-	/* don't reinit PLL when booting via I2C bootstrap option */
-	mfsdr(SDR0_PINSTP, reg);
-	if (reg != 0xf0000000)
-		board_pll_init_f();
-
-	acadia_gpio_init();
-
-	/* Configure 405EZ for NAND usage */
-	mtsdr(SDR0_NAND0, SDR_NAND0_NDEN | SDR_NAND0_NDAREN | SDR_NAND0_NDRBEN);
-	mfsdr(SDR0_ULTRA0, reg);
-	reg &= ~SDR_ULTRA0_CSN_MASK;
-	reg |= (SDR_ULTRA0_CSNSEL0 >> CONFIG_SYS_NAND_CS) |
-		SDR_ULTRA0_NDGPIOBP |
-		SDR_ULTRA0_EBCRDYEN |
-		SDR_ULTRA0_NFSRSTEN;
-	mtsdr(SDR0_ULTRA0, reg);
-
-	/* USB Host core needs this bit set */
-	mfsdr(SDR0_ULTRA1, reg);
-	mtsdr(SDR0_ULTRA1, reg | SDR_ULTRA1_LEDNENABLE);
-
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all ints */
-	mtdcr(UIC0CR, 0x00000010);
-	mtdcr(UIC0PR, 0xFE7FFFF0);	/* set int polarities */
-	mtdcr(UIC0TR, 0x00000010);	/* set int trigger levels */
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-
-	return 0;
-}
-
-int misc_init_f(void)
-{
-	/* Set EPLD to take PHY out of reset */
-	out8(CONFIG_SYS_CPLD_BASE + 0x05, 0x00);
-	udelay(100000);
-
-	return 0;
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-	u8 rev;
-
-	rev = in8(CONFIG_SYS_CPLD_BASE + 0);
-	printf("Board: Acadia - AMCC PPC405EZ Evaluation Board, Rev. %X", rev);
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return (0);
-}