diff options
Diffstat (limited to 'board/amcc/sequoia/init.S')
| -rw-r--r-- | board/amcc/sequoia/init.S | 79 |
1 files changed, 0 insertions, 79 deletions
diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S deleted file mode 100644 index f876639d35..0000000000 --- a/board/amcc/sequoia/init.S +++ /dev/null @@ -1,79 +0,0 @@ -/* - * (C) Copyright 2008 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm-offsets.h> -#include <ppc_asm.tmpl> -#include <asm/mmu.h> -#include <config.h> - -/* - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - */ - .section .bootpg,"ax" - .globl tlbtab - -tlbtab: - tlbtab_start - - /* vxWorks needs this as first entry for the Machine Check interrupt */ - tlbentry( 0x40000000, SZ_256M, 0, 0, AC_RWX | SA_IG ) - - /* - * The RAM-boot version skips the SDRAM TLB (identified by EPN=0). This - * entry is already configured for SDRAM via the JTAG debugger and mustn't - * be re-initialized by this RAM-booting U-Boot version. - */ -#ifndef CONFIG_SYS_RAMBOOT - /* TLB-entry for DDR SDRAM (Up to 2GB) */ -#ifdef CONFIG_4xx_DCACHE - tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_G) -#else - tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_IG ) -#endif -#endif /* CONFIG_SYS_RAMBOOT */ - - /* TLB-entry for EBC */ - tlbentry( CONFIG_SYS_BCSR_BASE, SZ_256M, CONFIG_SYS_BCSR_BASE, 1, AC_RWX | SA_IG ) - - /* BOOT_CS (FLASH) must be forth. Before relocation SA_I can be off to use the - * speed up boot process. It is patched after relocation to enable SA_I - */ - tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_RWX | SA_G ) - -#ifdef CONFIG_SYS_INIT_RAM_DCACHE - /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G ) -#endif - - /* TLB-entry for PCI Memory */ - tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 1, AC_RW | SA_IG ) - tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_RW | SA_IG ) - tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_RW | SA_IG ) - tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_RW | SA_IG ) - - /* TLB-entry for NAND */ - tlbentry( CONFIG_SYS_NAND_ADDR, SZ_1K, CONFIG_SYS_NAND_ADDR, 1, AC_RWX | SA_IG ) - - /* TLB-entry for Internal Registers & OCM */ - tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0, AC_RWX | SA_I ) - - /*TLB-entry PCI registers*/ - tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_RWX | SA_IG ) - - /* TLB-entry for peripherals */ - tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_RWX | SA_IG) - - /* TLB-entry PCI IO Space - from sr@denx.de */ - tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_RWX | SA_IG) - - tlbtab_end |