5 files changed, 0 insertions, 179 deletions
diff --git a/board/amlogic/nanopi-k2/Kconfig b/board/amlogic/nanopi-k2/Kconfig
deleted file mode 100644
index 374bda200c..0000000000
--- a/board/amlogic/nanopi-k2/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_NANOPI_K2
-
-config SYS_BOARD
-	default "nanopi-k2"
-
-config SYS_VENDOR
-	default "amlogic"
-
-config SYS_CONFIG_NAME
-	default "nanopi-k2"
-
-endif
diff --git a/board/amlogic/nanopi-k2/MAINTAINERS b/board/amlogic/nanopi-k2/MAINTAINERS
deleted file mode 100644
index 0452bd1fa1..0000000000
--- a/board/amlogic/nanopi-k2/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-NANOPI-K2
-M:	Neil Armstrong <narmstrong@baylibre.com>
-S:	Maintained
-F:	board/amlogic/nanopi-k2/
-F:	include/configs/nanopi-k2.h
-F:	configs/nanopi-k2_defconfig
diff --git a/board/amlogic/nanopi-k2/Makefile b/board/amlogic/nanopi-k2/Makefile
deleted file mode 100644
index 7d9b666e76..0000000000
--- a/board/amlogic/nanopi-k2/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# (C) Copyright 2018 Thomas McKahan
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= nanopi-k2.o
diff --git a/board/amlogic/nanopi-k2/README b/board/amlogic/nanopi-k2/README
deleted file mode 100644
index d450d3c2b2..0000000000
--- a/board/amlogic/nanopi-k2/README
+++ /dev/null
@@ -1,99 +0,0 @@
-U-Boot for NanoPi-K2
-====================
-
-NanoPi-K2 is a single board computer manufactured by FriendlyElec
-with the following specifications:
-
- - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz
- - ARM Mali 450 GPU
- - 2GB DDR3 SDRAM
- - Gigabit Ethernet
- - HDMI 2.0 4K/60Hz display
- - 40-pin GPIO header
- - 4 x USB 2.0 Host, 1 x USB OTG
- - eMMC, microSD
- - Infrared receiver
-
-Schematics are available on the manufacturer website.
-
-Currently the u-boot port supports the following devices:
- - serial
- - eMMC, microSD
- - Ethernet
-
-u-boot compilation
-==================
-
- > export ARCH=arm
- > export CROSS_COMPILE=aarch64-none-elf-
- > make nanopi-k2_defconfig
- > make
-
-Image creation
-==============
-
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
-
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
- > git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot
- > git clone https://github.com/friendlyarm/u-boot.git -b nanopi-k2-v2015.01 amlogic-u-boot
- > cd amlogic-u-boot
- > sed -i 's/aarch64-linux-gnu-/aarch64-none-elf-/' Makefile
- > sed -i 's/arm-linux-/arm-none-eabi-/' arch/arm/cpu/armv8/gxb/firmware/scp_task/Makefile
- > make nanopi-k2_defconfig
- > make
- > export FIPDIR=$PWD/fip
-
-Go back to mainline U-Boot source tree then :
- > mkdir fip
-
- > cp $FIPDIR/gxb/bl2.bin fip/
- > cp $FIPDIR/gxb/acs.bin fip/
- > cp $FIPDIR/gxb/bl21.bin fip/
- > cp $FIPDIR/gxb/bl30.bin fip/
- > cp $FIPDIR/gxb/bl301.bin fip/
- > cp $FIPDIR/gxb/bl31.img fip/
- > cp u-boot.bin fip/bl33.bin
-
- > $FIPDIR/blx_fix.sh \
-	fip/bl30.bin \
-	fip/zero_tmp \
-	fip/bl30_zero.bin \
-	fip/bl301.bin \
-	fip/bl301_zero.bin \
-	fip/bl30_new.bin \
-	bl30
-
- > $FIPDIR/fip_create \
-	 --bl30 fip/bl30_new.bin \
-	 --bl31 fip/bl31.img \
-	 --bl33 fip/bl33.bin \
-	 fip/fip.bin
-
- > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
-
- > $FIPDIR/blx_fix.sh \
-	fip/bl2_acs.bin \
-	fip/zero_tmp \
-	fip/bl2_zero.bin \
-	fip/bl21.bin \
-	fip/bl21_zero.bin \
-	fip/bl2_new.bin \
-	bl2
-
- > cat fip/bl2_new.bin fip/fip.bin > fip/boot_new.bin
-
- > $FIPDIR/gxb/aml_encrypt_gxb --bootsig \
-		--input fip/boot_new.bin
-		--output fip/u-boot.bin
-
-and then write the image to SD with:
-
- > DEV=/dev/your_sd_device
- > dd if=fip/u-boot.bin of=$DEV conv=fsync,notrunc bs=512 seek=1
diff --git a/board/amlogic/nanopi-k2/nanopi-k2.c b/board/amlogic/nanopi-k2/nanopi-k2.c
deleted file mode 100644
index ae29dd6fa4..0000000000
--- a/board/amlogic/nanopi-k2/nanopi-k2.c
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2018 Thomas McKahan
- */
-
-#include <common.h>
-#include <dm.h>
-#include <environment.h>
-#include <asm/io.h>
-#include <asm/arch/gx.h>
-#include <asm/arch/sm.h>
-#include <asm/arch/eth.h>
-#include <asm/arch/mem.h>
-
-#define EFUSE_SN_OFFSET		20
-#define EFUSE_SN_SIZE		16
-#define EFUSE_MAC_OFFSET	52
-#define EFUSE_MAC_SIZE		6
-
-int board_init(void)
-{
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	u8 mac_addr[EFUSE_MAC_SIZE];
-	char serial[EFUSE_SN_SIZE];
-	ssize_t len;
-
-	meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
-
-	if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
-		len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
-					  mac_addr, EFUSE_MAC_SIZE);
-		if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr))
-			eth_env_set_enetaddr("ethaddr", mac_addr);
-	}
-
-	if (!env_get("serial#")) {
-		len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial,
-			EFUSE_SN_SIZE);
-		if (len == EFUSE_SN_SIZE)
-			env_set("serial#", serial);
-	}
-
-	return 0;
-}
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	meson_gx_init_reserved_memory(blob);
-
-	return 0;
-}