diff options
Diffstat (limited to 'board/amlogic/sei510/README')
-rw-r--r-- | board/amlogic/sei510/README | 122 |
1 files changed, 0 insertions, 122 deletions
diff --git a/board/amlogic/sei510/README b/board/amlogic/sei510/README deleted file mode 100644 index d9358aa501..0000000000 --- a/board/amlogic/sei510/README +++ /dev/null @@ -1,122 +0,0 @@ -U-Boot for Amlogic SEI510 -======================= - -SEI510 is a customer board manufactured by SEI Robotics with the following -specifications: - - - Amlogic S905X2 ARM Cortex-A53 quad-core SoC - - 2GB DDR4 SDRAM - - 10/100 Ethernet (Internal PHY) - - 1 x USB 3.0 Host - - eMMC - - SDcard - - Infrared receiver - - SDIO WiFi Module - -Currently the u-boot port supports the following devices: - - serial - - Ethernet - - Regulators - - Clock controller - -u-boot compilation -================== - - > export CROSS_COMPILE=aarch64-none-elf- - > make sei510_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot - > cd amlogic-u-boot - > make g12a_u200_v1_defconfig - > make - > export UBOOTDIR=$PWD - -Download the latest Amlogic Buildroot package, and extract it : - > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz - > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader - > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706 - > export FIPDIR=$BRDIR/bootloader/uboot-repo/fip - -Go back to mainline U-Boot source tree then : - > mkdir fip - - > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ - > cp $UBOOTDIR/build/board/amlogic/g12a_u200_v1/firmware/acs.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12a/bl2.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12a/bl30.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12a/bl31.img fip/ - > cp $FIPDIR/g12a/ddr3_1d.fw fip/ - > cp $FIPDIR/g12a/ddr4_1d.fw fip/ - > cp $FIPDIR/g12a/ddr4_2d.fw fip/ - > cp $FIPDIR/g12a/diag_lpddr4.fw fip/ - > cp $FIPDIR/g12a/lpddr4_1d.fw fip/ - > cp $FIPDIR/g12a/lpddr4_2d.fw fip/ - > cp $FIPDIR/g12a/piei.fw fip/ - > cp u-boot.bin fip/bl33.bin - - > sh fip/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > sh fip/blx_fix.sh \ - fip/bl2.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/acs.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.g12a.enc \ - --level v3 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 - > $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig - > $FIPDIR/g12a/aml_encrypt_g12a --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc \ - --ddrfw1 fip/ddr4_1d.fw \ - --ddrfw2 fip/ddr4_2d.fw \ - --ddrfw3 fip/ddr3_1d.fw \ - --ddrfw4 fip/piei.fw \ - --ddrfw5 fip/lpddr4_1d.fw \ - --ddrfw6 fip/lpddr4_2d.fw \ - --ddrfw7 fip/diag_lpddr4.fw \ - --level v3 - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 |